Building my dads LS 5.3 motor for his 1967 Camaro SS . Built heads , Texas speed and performance turbo cam kit , melling oil pump , ETC.
Пікірлер: 55
@jessehatcher2767 Жыл бұрын
Gotta have pops ON CLEAN!!!
@lyndleshelby62912 жыл бұрын
Respect sir! I've seen on other LS builds that the front and rear covers have a centering tool to use when installing the covers so the seals are properly aligned.
@tutibackyardbuilds81092 жыл бұрын
Good tip! thanks I really appreciate it .
@richardgarza57632 жыл бұрын
Tuti you look real young and it looks like you've been doing this for years.👌
@tutibackyardbuilds81092 жыл бұрын
Thanks I really appreciate it 💪
@samuelcortez3895 Жыл бұрын
Great video ! Thank you
@DreamChaserCustoms4052 жыл бұрын
Nice work. U got it covered 🏁
@TRAVI_9012 жыл бұрын
I would have definitely soaked the hydraulic rollers b4 putting back in the block and would definitely bought new trays for them too but other then that looks good
@tutibackyardbuilds81092 жыл бұрын
I left them soaking over night and I also put new lifter trays . I just didn't show it on the video . But I appreciate the advice 💯💪
@trentdawg2832 Жыл бұрын
I always give the lifters the R.kelley treatment and just give em a golden shower….never had any problems doing it that way…..if you let them soak in oil then they have no way too pump up because they are already full which leaves no room for error, at all…..regardless of who’s at fault…
@trentdawg2832 Жыл бұрын
But either way will work, nothing to lose sleep over, id be more concerned about new lifter trays actually but i see you got that under control too!!!
@GetMoney-uo1qt Жыл бұрын
Salute. Great footage & info. 😉💯
@johnfaubion77202 жыл бұрын
I hope you checked the clearance between the oil pump pick-up and the pan. The pan I purchased came with a pick-up that was nearly 2 inches from the bottom of the pan. If I had run it as it came, I would have surely starved the bearings for oil. I had to modify the stock pick-up to get it to 3/8" from the bottom of the pan as GM recommends.
@88box982 жыл бұрын
💯👏nice work
@tutibackyardbuilds81092 жыл бұрын
Thanks 💯
@antoniolittlejohn29912 жыл бұрын
NICE JOB
@tutibackyardbuilds81092 жыл бұрын
Thanks!
@williamjohns97942 жыл бұрын
Yo. Big fan of the channel. Keep it up!
@tutibackyardbuilds81092 жыл бұрын
Thanks I really appreciate it 💪
@lazaroperez27502 жыл бұрын
Wow you are amazing 🤩
@tutibackyardbuilds81092 жыл бұрын
Wow, thank you
@jasonwright36402 жыл бұрын
Yesssss indeed 💯💯💯💯💯💯💯💯💯
@tutibackyardbuilds81092 жыл бұрын
💯💪
@Mr_getinthere2 жыл бұрын
💪💪💪💪
@jaime_mr22 жыл бұрын
🔥🔥🔥🔥
@tutibackyardbuilds81092 жыл бұрын
💯💪
@Classic1one2 жыл бұрын
🔥
@tutibackyardbuilds81092 жыл бұрын
💯
@lewisdeclouette6342 Жыл бұрын
💯💯💯💯💯💯💯💯💯💯💯
@cravecrumbs2 жыл бұрын
🙌💯
@tutibackyardbuilds81092 жыл бұрын
💪
@puppetmasterblaster2 жыл бұрын
legit
@tutibackyardbuilds81092 жыл бұрын
💪💪
@rick15432 жыл бұрын
This is awesome !!! Btw I really like your logo anywhere I can buy some merch? Thanks.
@tutibackyardbuilds81092 жыл бұрын
Thanks , Working on it!
@anthony-cm3dj2 жыл бұрын
I could be mistaken but looks like those came bearings are wore out could see the copper
@DA128002 жыл бұрын
What did you get your 5.3 out of ?and what transmission are you running
@trondvidardalseng894 Жыл бұрын
How much boost are you aming for? Did you put i ring gap, gaping the piston rings for boost application?
@williamjohns97942 жыл бұрын
Did you have to set the ring gaps
@prosperityherbs2018 Жыл бұрын
Giving the 5.3 with those upgrades what did you get the horsepower an torque
@kB4B Жыл бұрын
if i wanted to build me a 1990 s10 for racing like not drag but on the road if i did a 5.3ls what twin turbo would you recommend i want all the power any advice on what brand im new and very lost? and i lack some of your knowledge..
@jimmyramirez8844 Жыл бұрын
What rocker arms did you get and what head gasket did you install?
@r3wturb0x51 Жыл бұрын
are those speed engineering turbo headers. i been looking at them for my truck, just trying to work out everything i need for twin turbo setup.
@sinnerlsx42662 жыл бұрын
What lifters are you using
@CLMoore-nn1xy2 жыл бұрын
All stock bottom end?
@drjoe23232 жыл бұрын
U should open a shop bro lmk il ship my car down to Florida
@tutibackyardbuilds81092 жыл бұрын
Thanks, I really appreciate it.
@javfernandez4695 Жыл бұрын
What’s the part number of the oil pump you used?
@trentdawg2832 Жыл бұрын
Why 2 cam sensors?
@kevinjennische82092 жыл бұрын
What are the cam specs? 706 heads?
@sfld22662 жыл бұрын
Hey tuti. Did gap the rings? Thinking about doing this to LSA my 4.8 but the ring gapping is what’s confusing me.
@tutibackyardbuilds81092 жыл бұрын
yes I did but to be honest I have alot of friends pushing alot of boost on stock ring gaps.
@tomservin2 жыл бұрын
What did this built cost, I will be building my LM7.