LS engine FULL rebuild (15min time lapse)

[@donovanlucibello379]

There is no better feeling than that first fire of an engine!!! Nicely done, brother. Big fan of your work, Matt. I remember rebuilding the carb on my Z50 with my son from your video years ago.

[@HTMR]

Thank you!

[@jefftheis742]

Love your videos,I used them alot through the restoration of my 94 kx 250,now I'm doing a 4.8 LS for a jeep, nice work

[@HTMR]

Awesome thank you!

[@theccwdad]

Ive been into jdm cars for 20 years. Im ready for a Corvette now, I decided this week 😂. Cant wait to sell my subaru and start the next project. Gonna do a stroker with texas speed cam and setup for super simple manifold port nitrous system. I always wanted a n20 button❤

[@hectorfernandonunezmoreno7388]

Wow! Excellent job, man, congratularions 👏🏼😃 The LS engine is the GM's best creation! Best regards from Guadalajara, Jalisco, Mexico 🤝🏼🤠

[@Genx4]

I put a 5.3 with 180k in a c10. Elgin 1840p cam, pac1218 springs, and a billet 78/75. This has been its fourth year on 10psi. Fun rides

[@HTMR]

@@Genx4 I have the same combo except cast wheel. I'm at 10psi also on E. Looking to increase that soon. Yeah it's fun!

[@williamlind2843]

What did I get myself into?? The last engine I built was an 86' AMC 360, 25 years ago. It still runs today. Why did I take this on???

[@Yankee1776]

Man I am so glad I found your channel! I am rebuilding a 6.0 LS on my channel now. How did you find your machine shop that polished and cleaned the crank?

[@fishnmaster421]

How’s it turned out ?

[@Yankee1776]

@@fishnmaster421 Bringing the block to the machine shop Monday. I finally had some budget to continue the build.

[@Im-a-rock]

@@Yankee1776done yet?

[@montyboy4748]

Curious on why you didn’t replace the rocker arms or at least the bearings in them

[@olenaerhardt7725]

How heavy is the top engine cover to get to the pistons? Can you replace the piston rings with the engine on the car? Thank you for a great film.

[@Im-a-rock]

You need to pull the engine to replace the piston rings

[@mrjvmccall]

Great video. You have a new subscriber. How much would you charge to do that for someone???

[@mikedaugharty5544]

faster than any top fuel crew !!! great job matt!! you enjoying it after all the speed bumps in a build of this kind..!!

[@TheRunningViperzZ]

I wondering if I should do this in my 70 nova, I have a cammed 454 in there at the moment. But wanted to go more modern as I want to daily it

[@نايف-ع3ن7ك]

I have question now when I install timing chain should I let the piston 1 at TDC or just met 2 dot like what I saw in this video

[@crestflock]

Do you have videos with more details specific etc? I have a LS 5.3 and I’d like to rebuild it.

[@HTMR]

Yes on my channel

[@crestflock]

@@HTMR Thank you, I'm going to see them all and wish me luck and one more thing, where do you buy the kit to rebuild whats the best brand?

[@GrumpleslamAlabaster]

Nice work!

[@markhuffstetler9009]

What year LS engine did you you use , c clip on pistons

[@HTMR]

2005. Gen 3 with gen 4 rods/pistons. Best of both worlds.

[@bignellgaming4243]

Nice work. Why not replace the pistons?

[@HTMR]

They were in good shape and usually don't fail.

[@carlos2nice]

What type of setup of wet stone or dry stone u used to clean the surface of the engine block pal?

[@HTMR]

kzbin.info/www/bejne/rZWZm3iKZ8Zsd5Ifeature=shared

[@johansalazar4701]

please provide a video with all part numbers please or a google docs, watched the whole build series like 15 videos but didnt write down parts

[@HTMR]

All links are in vid description of the build series.

[@andybradley9882]

Great job! Curious since it had been a couple years, how has motor perfored? Anything you wish would have done differently? Just bought my first 5.3 and getting ready to do same buildby watching you channel! Thanks in advance!

[@HTMR]

Runs great and now about 450-500hp with 10# of boost. I wish I went with a higher volume/pressure oil pump than the one I selected for my application. Only regret so far.

[@patriotadventures1776]

Hey buddy, can you tell me the details on the accessories setup, engine mounts etc. In order to fit the engine in your car? I have a 70' that I'm putting a 6.0 in is why I'm asking. Thanks in advance!

[@HTMR]

Stock truck acc, holley fwd engine mounts, holley 302-3 oil pan. Fits perfect.

[@moosez3738]

Top notch video! What was the piece of equipment that looked like a sand blaster? Seemed to be some sort of high pressure water sprayer but I want to know for sure

[@HTMR]

Homemade vapor blaster constructed from plywood: howtomotorcyclerepair.com/woodvaporblaster/

[@JAY3CRAY]

What kind of transmission are you putting on there I saw you pull the older one??

[@HTMR]

kzbin.info/www/bejne/r3aUZGaDpLdmoNk

[@ab539]

Need to bumble bee your knowledge man!

[@stevenmclendon453]

hey man! what did you use when you sanded your top end flat surface? and what grit sand paper did you use thank you for the video! this literally all i need for the build i want!

[@HTMR]

kzbin.info/www/bejne/rZWZm3iKZ8Zsd5Isi=GP0Yc5-74tpayl1B

[@tezzasbigbuz3933]

What did you wash the pistons with why did it look like a sand blaster

[@HTMR]

@@tezzasbigbuz3933 my diy vapor blaster.

[@ThomasJoseph315]

What about the anti-wear coating on the pistons? Is it not needed?

[@HTMR]

Not sure, but it has been running great for 2yrs.

[@dirtbika70]

Can you link the parts washer that thing is awesome !

[@HTMR]

@@dirtbika70 howtomotorcyclerepair.com/diyvaporblasterbuildplans/

[@jessisaimartinez2580]

What is he squaring off?

[@lures]

I would love to do a LS swap in my 68 chevelle and get rid of the 396 it's not a number matching car. when doing the swap would you need a computer or wiring harness for the motor?

[@HTMR]

Yes there are many ECU options, however I would go with a Holley : kzbin.info/www/bejne/ZqTCpHaZpLakeq8

[@gerardolopez5875]

Located?

[@kk6199]

I did not see you address the chronic hydrocilator issue on this model of engine.

[@HTMR]

Huh?

[@treymorrison8837]

The fuckin what? 😂😂

[@ChevyS10LSUK]

I see you didn't sort the chronic meth issue?

[@beauueab808]

Yeah cause it not a part or a word for that matter.😂

[@Brandon_obs_ls]

@@HTMRwhat harness did u use

[@andymangra201]

Anyone know where I can pick up that crank pulley removal tool form? Thanks

[@HTMR]

amzn.to/3PU0BmP

[@slicksloth_416]

Did you reuse the inner and outer main cap bolts

[@HTMR]

Yes

[@deez6686]

I wish I have your knowledge

[@timweb1510]

Enjoy watching these. Mine is still on the stand, I need to buy lifters and ls swap oil pan for fox

[@williamlind2843]

Awesome video. I need the slow mode though!

[@HTMR]

I have those on my channel

[@finallyholdingontoletitgo1607]

What kind of wash cabinet is that?

[@HTMR]

My DIY vapor blaster: howtomotorcyclerepair.com/diyvaporblasterbuildplans/

[@blackhawku]

What did you use to clean you deck with?

[@HTMR]

kzbin.info/www/bejne/rZWZm3iKZ8Zsd5I

[@johnrachelstahl281]

Is there the same video without it speeding through it with commentation?

[@HTMR]

Yes check out my channel.

[@johnrachelstahl281]

I did, all I can find is the time lapse. Do you have a link I can use?

[@HTMR]

@@johnrachelstahl281 Here is the playlist 67 vids: kzbin.info/aero/PL82YKl1Zk5elAuG1lp4g5G2H9DA4sjjQj&si=u92f58OaL67zO282

[@Hesh_Mast]

The whole time i was thinking wait those internals look stock?? Then i saw the turbo and now i see why its 500hp

[@CaliKush-v5r]

I want him to do all my motor work where is this guy

[@Gear_to_gear]

How much did it do on the dyno

[@HTMR]

No dyno yet. Should do 500-600 rwhp no problem.

[@matttackel997]

sand blasted pistons... that's hilarous.

[@HTMR]

It's actually vapor blast....totally different....I know so funny.

[@MrPeewacker]

Spent all that time cleaning heads and ignored the block. Sumbeach was muddy lmfao

[@JoseContreras-mv5yz]

"Rebuilt"😂

[@travis1572]

Sweet

[@PropTechMotorcycleTuning]

Great job! Time millioner....

[@JanelleWilliams-i2d]

Wilson David Perez Ruth Harris James

[@stevesalkas9128]

I got spare 20 mins build me one .....

[@amc848]

Not LS engine. Deceptive title

[@MxGRhythmlModsMusicGamingl]

the only difference from an ls is the ls are aluminum blocks.

[@1LElife]

definitely a Gen 3 LS, check your knowledge

[@نايف-ع3ن7ك]

The difference is - first LS for sedans and L for trucks like LY6 and ls2 ,L77 for caprice both are 6.0 both rectangular port head -second the block material always specially in gen 3 LS the truck version is an iron block and sedan version is aluminum block -the last difference is intake the truck are longer and bigger and that’s it 😂😂😂

[@mikedewsberry1774]

IT IS A VORTEC NOT AN LS...SAME PLATFORM BUT NOT AN LS ENGINE

[@SOLDOZER]

If you look up parts for it, they are all called Gen 3, 4.....etc. Looks like you have about 300,000 emails top send out to tell everyone they'e wrong.

[@sjd7188]

Full rebuild this is a plastigauge re ring job