LS OBS ENGINE FAILURE-IF YOU FEEL LIKE GIVING UP WATCH THIS!

  Рет қаралды 2,288

Moore Motorsports Garage

Moore Motorsports Garage

Күн бұрын

Пікірлер: 63
@jdalexa84
@jdalexa84 5 ай бұрын
Keep pushing through the trials you will get there. God is with you.
@JamesDguy
@JamesDguy 5 ай бұрын
Thank you and it took some reminding to remember His promises but your right! Amen 🙏🏻
@jorgebennett9963
@jorgebennett9963 5 ай бұрын
I just prayed for your success, your family, your business and everything you put your mind too. God is watching. He loves you and so do I
@JamesDguy
@JamesDguy 5 ай бұрын
Thank you God bless you and love you too brother ✝️❤️🙌🏻
@joshwinchester2001
@joshwinchester2001 5 ай бұрын
Amen
@ejsvirtualgarage
@ejsvirtualgarage 5 ай бұрын
Thank you for sharing this! The Purple Thunder will rise again! I've been going through a rough patch myself; some of it self-inflicted. I've been tempted to walk away & give up, too. Now I'm doing an entire detox & working to rebuild with God's Word & be what I need to be for humankind. Thanks again for all you do. Agape
@JamesDguy
@JamesDguy 5 ай бұрын
Thank you for I needed to hear this from you. We all fail but God has us and if we focus on Him not the storm then we could literally walk on the water peacefully with Him. You got this keep going! God bless you!
@backalleycustoms21
@backalleycustoms21 5 ай бұрын
Man, I needed this. Did the top end on my b16 and then a week later timing belt snapped. Decided to let it sit a while and pull my c10 out. Got busy and stopped recording any videos, but after a new engine, transmission, driveshaft, tires, and about everything else in between. IT STILL DOESN’T RUN! Well, kinda.. it starts, but, so many more things to tidy up and finish before its even close at all and I really need to pick the camera back up. Thank you for this, honestly!
@JamesDguy
@JamesDguy 5 ай бұрын
Thank you for confirming my suspicion. I had a feeling the engine failure was meant to be because I often see sometimes things fail so I can show others im not perfect and that it happens to us all. It’s not about me it’s about Jesus and about yall in the end!
@Reid1924
@Reid1924 5 ай бұрын
Sorry to hear about the rod, glad they’re swapping it for you. It’s turning out great despite issues.
@JamesDguy
@JamesDguy 5 ай бұрын
Thank you and yes indeed!! Thanks for the support over the years! God bless you brother
@brandonmcfellin6773
@brandonmcfellin6773 5 ай бұрын
God knows you are capable of fixing this, and so do I. Been watching your vids for sometime now. Show us how it's done. ❤
@JamesDguy
@JamesDguy 5 ай бұрын
Thanks appreciate it. Since I didn’t have the money I just swapped bottom ends out but now need funds to get this one freshened up but the LORD provides so im not stressing it. Stay tuned and God bless!
@bazilwreckerloughead
@bazilwreckerloughead 5 ай бұрын
God will grant you with the patents to endure this & the strength to overcome!
@JamesDguy
@JamesDguy 5 ай бұрын
Amen 🙏🏻 count it all joy
@2StallGarage
@2StallGarage 5 ай бұрын
Good message James. Glad you’re not giving up. You’re talented. God bless you and yours.
@JamesDguy
@JamesDguy 5 ай бұрын
Thank you i appreciate you and God bless you!
@GlassWerx
@GlassWerx 5 ай бұрын
Sucks about the motor. Was wondering how things were going for ya. U got this.
@JamesDguy
@JamesDguy 5 ай бұрын
Thanks brother yeah a set back for sure
@GlassWerx
@GlassWerx 5 ай бұрын
@@JamesDguy I know how ya feel. Felt the same way when I was having issues with my motor. U will have it back n better then ever in no time
@Brysonandmason320
@Brysonandmason320 5 ай бұрын
I looked for you video earlier today I knew you was gonna post today I could feel it god bless you brothrr
@JamesDguy
@JamesDguy 5 ай бұрын
Ha awesome! Glad to see you here! Thanks for the support and God bless you!
@gc5Hayward
@gc5Hayward 5 ай бұрын
Keep going my brother!
@JamesDguy
@JamesDguy 5 ай бұрын
Amen brother been the trials but count it all joy. It’s easier said than done at times if im being honest. The Lord provides though without a doubt!
@T.-14
@T.-14 5 ай бұрын
Amen brother, I really appreciate your videos keep up the great work ❤
@JamesDguy
@JamesDguy 5 ай бұрын
Thank you doing my best.
@brandon6572
@brandon6572 5 ай бұрын
GOD bless you brother 🙏 it thankfuly will all work out. Great build series. Keep it up 💯
@JamesDguy
@JamesDguy 5 ай бұрын
Thank you God bless you! I got my junkyard replacement today just gotta freshen it up and get it in as soon as I have the funds. Thanks for the support!
@motocrossedful
@motocrossedful 5 ай бұрын
from an old man, you really great. Good message, great work and I appreciate your videos.
@JamesDguy
@JamesDguy 5 ай бұрын
Thank you I appreciate you!
@observationpostcharlie1365
@observationpostcharlie1365 5 ай бұрын
God bless you brother
@JamesDguy
@JamesDguy 5 ай бұрын
Thank you and God bless you too!
@btibbs626
@btibbs626 5 ай бұрын
Keep pushing bro, take a break from the truck spend time with family and rest! Rest! REST! This is the first time I seen your struggle since it isn’t a Honda lol, been watching for man a decade haha, keep going I know it’s hard and it’s easy to say why god why me I’m doing the right stuff why! But it’s all about how we handle our self’s in them moments brother, God has given you strength and knowledge to not sin in them moments and to keep pushing! You got this man trust me when you’re going down the road you will look back and be like man I’ve came along way.❤
@JamesDguy
@JamesDguy 5 ай бұрын
I took a break and went to visit family in Kansas just to come back to failure 😂 but it happened for someone else to get reached not for me. I am learning more and more the failures encourage others to show we are all human we all fail but the one who lifts us back up isn’t us especially if we know we need a savior! I was reminded it wasn’t about me but about someone else.
@StreetWorxx
@StreetWorxx 5 ай бұрын
The trails and tribulations are worth the Glory of God bro BIG things are coming bro! You got this and the message will be heard!
@JamesDguy
@JamesDguy 5 ай бұрын
Amen brother gonna have you here to help too! Big things coming
@joshwinchester2001
@joshwinchester2001 5 ай бұрын
Thanks for welding now I’m blind 😂
@JamesDguy
@JamesDguy 5 ай бұрын
😂 love you brother
@Christdeliverme
@Christdeliverme 5 ай бұрын
Thumbed up, mot for another LS video - but because of the John 14:6 message. God bless.
@JamesDguy
@JamesDguy 5 ай бұрын
Amen i understand 100% and that’s the main thing i care about is the message
@Christdeliverme
@Christdeliverme 5 ай бұрын
@@JamesDguy It shows brother. God bless you.
@alexrivera2450
@alexrivera2450 5 ай бұрын
Dude that’s me right now with my civic the stupid thing leans one side, swap the subframe wasn’t it and I’m running coil sleeves and that’s not doing the trick I ordered some cheap coilovers hopefully that works wish me luck I always feel like giving up on the damn thing 😅😢🤞
@JamesDguy
@JamesDguy 5 ай бұрын
Don’t give up you got this. I had that problem with a lot of my civics it would lean to driver side and I don’t weight much so wasn’t that lol just had to adjust the coil overs differently
@alexrivera2450
@alexrivera2450 5 ай бұрын
@@JamesDguy mine leans to the passenger side I bought cheap coilovers the brand is terrible probably its called “most plus” and I need to adjust the pre load on it bc I maxed out the coil over sleeves you ran a couple of years ago it wasn’t working out
@ChrisButler-h7u
@ChrisButler-h7u 5 ай бұрын
Just wanted to try catching you on your latest video! I'm looking into raptor lining my 2011 Honda Civic but I wanted to ask a few questions before I go forward with it. The car is mostly factory paint with no peeling clear coat except for the following areas. The driver side quarter panel and rocker and bottom of doors up to the trim and passenger side quarter and rockers and doors up to the trim which have all been recently sprayed witj acrylic enamel metallic. Im wondering how I should prepare it for raptor liner factory paint and where it has acrylic enamel and also how should I prepare the stuff that is plastic? Just let me know if you can would be much appreciated joining the raptor liner club.
@JamesDguy
@JamesDguy 5 ай бұрын
Awesome I would sand everything with 120 grit to scuff it up it will bond better with going over it all with 120 grit. 80 grit is ideal but if you don’t wanna go that rough then I understand but 80 is the best option you just need it rough
@ChrisButler-h7u
@ChrisButler-h7u 5 ай бұрын
​@JamesDguy I mean if using 80 is the best to insure a good bond then that's what I will use. I'm only doing it so the car looks the same is durable. I only realistically need it to last 5 years I might not even have the car that long even but wanted something that was tuff and would stay stuck even if it's only for 5 years max.
@ChrisButler-h7u
@ChrisButler-h7u 5 ай бұрын
​@JamesDguy I'm also wondering how much I'm going to need for bedliner for a 2011 honda civic it's a 4 Dr, I'm stuck between ordering the one that comes with 4 bottles of black or the one that comes with 8 bottles of black.
@bigreesetv
@bigreesetv 6 күн бұрын
@@ChrisButler-h7u how’s the build going for you fam?
@jonzo22
@jonzo22 5 ай бұрын
Wow you a legend
@JamesDguy
@JamesDguy 5 ай бұрын
Idk about that but I do appreciate you and your support!
@sinformant
@sinformant 5 ай бұрын
So the warranty is for the whole short block?
@JamesDguy
@JamesDguy 5 ай бұрын
Yup since the heads were good I just swapped block out simple enough. Just gotta transfer everything new over to the new junkyard bottom end 😂 one day I’ll just be able to afford a new engine not used lol
@FernandoLuna-y5m
@FernandoLuna-y5m 5 ай бұрын
I love your videos , you always make my day ...
@sinformant
@sinformant 5 ай бұрын
Now that you are learning LS stuff. You need to LS swap a honda😆
@JamesDguy
@JamesDguy 5 ай бұрын
Idk about that. The Honda engines are far more reliable lol
@truelegendracer
@truelegendracer 5 ай бұрын
Thank you
@tomb4275
@tomb4275 5 ай бұрын
What was wrong with the aftermarket intake? Was considering one
@hofferjh
@hofferjh 5 ай бұрын
✨️✨️💫💥💫❤️‍🔥😎
@joshwinchester2001
@joshwinchester2001 5 ай бұрын
🙏🙏🙏🙏🙏🙏🙏🙏💯
@T5_T-Rell
@T5_T-Rell 5 ай бұрын
Don’t stop spreading the word of god or feel pressured by those who say negative things because you like to throw some verses in your videos
@Damage-Case13
@Damage-Case13 29 күн бұрын
If you're a hardcore God guy, why would you quit when you hit adversity? You're preaching the word and talking about going against your own teachings? I'm not religious in the least, but I know you don't give up when your deity tests you ! I'm glad you didn't throw it all away. That would have been a big reason not to watch your videos or listen to what you are saying. This truck was in my "if you watched this, you may want to watch that" suggestions.
@bigreesetv
@bigreesetv 6 күн бұрын
I got my eyes on a 96 obs I cant wait to restore it and make it my project build.
LS OBS RUNS AGAIN! NOW WE FACE NEW ISSUES
11:16
Moore Motorsports Garage
Рет қаралды 2,1 М.
This BOOMER Can't Scrap The BLOWN UP 327! Can It Be Saved?
1:10:01
Jim's Automotive Machine Shop, Inc.
Рет қаралды 450 М.
It’s all not real
00:15
V.A. show / Магика
Рет қаралды 20 МЛН
Леон киллер и Оля Полякова 😹
00:42
Канал Смеха
Рет қаралды 4,7 МЛН
JUNKYARD ENGINES! 6.0 vs 5.3 - Which is the BETTER Buy?
52:37
Stay Tuned
Рет қаралды 883 М.
HOW TO DIY COLOR MATCH USING SPRAY CAN & MAKE IT LOOK GOOD!
17:22
Moore Motorsports Garage
Рет қаралды 2,5 М.
The HOLY GRAIL of Mustangs
26:48
Gas Monkey Garage
Рет қаралды 1,2 МЛН
LOW BUDGET PAINT JOB IN 2024 THAT LOOKS GOOD!
15:15
Moore Motorsports Garage
Рет қаралды 37 М.
Building An 8,000-RPM LS - LS5.0's Short-Block Comes Together
19:56
BARN FIND: John's E-Type Jaguar!
23:45
Dennis Collins
Рет қаралды 157 М.
HOW TO SPRAY PAINT & NOT GET STRIPES!
13:01
Moore Motorsports Garage
Рет қаралды 12 М.
It’s all not real
00:15
V.A. show / Магика
Рет қаралды 20 МЛН