Hey Guys, Don't forget to like and subscribe if you liked the video and stay tuned for more epic builds and LS related content! Thank you for all of your support.
Пікірлер: 86
@MrYz250fman9 ай бұрын
The yellow wire was for the original points ignition setup. My 68 firebird was the same way. Something about the points only needed a full 12 volts while being started and the other wire that fed the points with the key on the on position only gave it 9.3 volts.
@obs4life228 Жыл бұрын
You sir have earned a subscriber. Clean job. If I would have done anything differently, maybe wrap the fuel pump wires in the black wire loom to blend in with the frame. Great job! 👏
@manofreedom Жыл бұрын
Holy cow. I can't believe I found your video. I just bought a 1967 Camaro and I want to do the exact same build on it. I'm thinking of going full resto-mod (more emphasis on the "mod") with the LS swap and a new 10 speed automatic. I want a custom interior update with all the modern comforts.....electric and heated seats, computer and flat screen GMC system, back up sensors and camera, new awesome sterio system. I'm looking forward to watching the rest of your video updates on this one. I just subbed to you channel.
@jlove24 Жыл бұрын
Look up stitched by slick on KZbin he can do exactly what you want
@manofreedom Жыл бұрын
@@jlove24 Thank you, I will look him up.
@Tire_Smoke11 ай бұрын
I understand, but seeing that beautiful 454 come out brought tears to my eyes 😞
@1969camaro4 ай бұрын
Jesus you people are so overwhelmed with old engine blocks I’m pretty sure he’s gonna keep it. Don’t be a crybaby. It’s the man’s car to do whatever the f he wants with it.
@gordocarbo3 ай бұрын
Me too. Mod for mod that BB will destroy the LS.
@mattmccue51029 ай бұрын
Nice job! Planning a Resto-mod for a daily driver this gives me some inspiration. I have subscribed you are easy to listen too and you don’t waste time with any BS thanks.
@dickymillwisdom11 ай бұрын
Great job! Appreciate all the info. Looks pretty easy, but I'm sure there are always some snags. Regardless I learned allot. Cheer!
@GoldenState408 Жыл бұрын
just finished the video - YOU a Badddd Man! very nice job ! Clean
@rchavez50566 ай бұрын
Nice job!!! What intake manifold is that? I thought only an LS1 intake would fit under the hood. Do you know if a 67 and 69 would have the same clearance issues under the hood?
@spacedout106 Жыл бұрын
Great video im gonna use this as a blueprint to ls swap my 72 deville 💪💪💪
@ronaldplatts20119 ай бұрын
Great Video and a super clean install. Approximately how much time was the entire swap?
@maconherron14037 ай бұрын
Do you remember how many holes did you move motor mounts I heard you say it was too close to firewall from original bolt up
@DethMetulEddieTV6 ай бұрын
I’m sold on LS swapping my 81 z28. Thanks.
@jayburrough43085 ай бұрын
He's going to miss the TQ from the big block for sure
@gordocarboАй бұрын
Seen more than one do an ls swap and the car cant even break 13s. No way would I give up cubes thats going back wards. The cost, complicating a simple car seems backwards to me.
@YampiLebron8 ай бұрын
I need the harness and computer for an LS 6.0 engine from 2005
@charlesstrickland97610 ай бұрын
I watched the video and I’m doing the same thing with my 67 Camaro and I want more information about wiring harness. Thanks
@alchapel993 ай бұрын
Like your work I have a 68 camero with a 327 would like to swap to an LS note my camero is the same condition as the red as Camero you did a while back what do charge for complete swap thanks Alex
@spacedout106 Жыл бұрын
Can we get the link to the sbc-bbc motor mount brackets?
@reeladdictionsportfishing9324 Жыл бұрын
Great video, very informative 👏 👍
@jeremybocage83718 ай бұрын
Hey! Can i get a wire harness from you? Do you have an email or link?
@donaldhenderson32628 ай бұрын
Can can I contact you about doing a swap?
@roywarren62753 ай бұрын
Was there a specific year S10 headers you ordered for this swap or can you please share that info. Thanks
@cindycaballero54023 күн бұрын
Awesome 👌
@michaelbeeman415111 ай бұрын
What kind of money does it cost for a engine and labor to convert a 67?
@fabianvaladez7734 Жыл бұрын
Hey man want to purchase the harnesses with tune how can we make it happen
@muthagoose69 Жыл бұрын
love the video, great info in there! LS swapping a 68 Camaro pretty soon so this was a big help.
@austinstout40367 ай бұрын
Wasn’t sure how else to contact you, so sorry for the long message. I’m looking to get my first project car. I’m 19 years old. And i’ve been looking at a 1977 camaro. But I want to eventually LS swap it, to make it just a reliable daily. I have a general knowledge for working on cars. I love working on them and learning new things. But when it comes to LS swapping, i have no clue. I was just wondering if you could point me in the right direction. What is a solid, relatively affordable, and all around reliable LS that is not super crazy and good for just a beginner ? And if you could, what kind of manual trans would be good for it and the car ? Thank you, love the videos
@iCozzh4 ай бұрын
Ls1& t56 no?
@braedynschader50838 ай бұрын
Do you have a link for the harness that you sell?
@mavcar389 ай бұрын
What external fuel pump did you use? Thanks
@moochannel5238 ай бұрын
I don't even have a 67' but thank you, Anthony Hopkins.
@rickblood865310 ай бұрын
Are you still selling the wiring & tuned computer?
@Steven-cq8nv10 ай бұрын
I need a Ls3 harness and computer for 69 Camaro how much?
@fabianvaladez7734 Жыл бұрын
I want to buy the harness can you give me your information
@juvenilebuilds9776 Жыл бұрын
Where can I buy the harness and computer??
@davidpanella98985 ай бұрын
Wanting to use 02 Corvette 5.7 in my 69 Camaro- do you think the stock accessory setup will work ? I'm thinking it should be more compact and I prefer the look ..thanks for sharing !!
@randallpayne8054 Жыл бұрын
How did you raise the engine so the oil pan isnt on the crossmember? i am having same issue right now. Is there a simple solution?
@BrokeBoyz_Garage Жыл бұрын
It’s an aftermarket hot rod pan!
@JohnSutton247 ай бұрын
@@BrokeBoyz_GarageWhere could I purchase one of your stand alone harnesses?
@Brandon_obs_lsАй бұрын
@@BrokeBoyz_Garagedo u have a link for the headers
@jaydaviooo Жыл бұрын
Nice work !!!
@rumbador Жыл бұрын
Great video I am going to try to do an ls swap too on my 69 camaro. What headers did you use? I didn’t understand my bad Thank you
@rumbador Жыл бұрын
Can you share the S10 headers part number thank you again
@rumbador Жыл бұрын
What year s10 headers Thanks
@BrokeBoyz_Garage Жыл бұрын
Part Number: PTE-H8073
@Brandon_obs_lsАй бұрын
@@BrokeBoyz_Garagehow much they cost
@renevelazquez8407 Жыл бұрын
I am so impressed!! I have a 1967 Firebird that is dying to get your attention. How can I get ahold of you?
@BrokeBoyz_Garage Жыл бұрын
Just let me know what it is your needing and I can help you out
@TheHsan229 ай бұрын
Was thinking same for my stock 67 400 'Vert... would be a nice upgrade.
@joeberan4040 Жыл бұрын
Good job!
@GoldenState408 Жыл бұрын
hey just subbed to your channel - appreciate the video. can i ask you ya where you are located? do you take on projects?
@BrokeBoyz_Garage Жыл бұрын
Ohio and not normally! Just depends on the deal
@Brandon_obs_lsАй бұрын
@@BrokeBoyz_Garagedo u have a link for the headers
@joebonanno285 Жыл бұрын
Where is your shop?
@Jackdagger-fo2rsАй бұрын
What do you charge to put ls2 in 69 camaro
@melvinbonilla865 Жыл бұрын
Awesome video and great build! Very informative. How do I contact you for the harness? Im also swapping a ls into a 67’ Camaro
@BrokeBoyz_Garage Жыл бұрын
You can email me at nick77noble@yahoo.com Make sure to put in the subject ls swap harness so I’m able to find it
@thaynebrayton77612 ай бұрын
Where do I find the parts list
@xdrenaline6 ай бұрын
What headers did you use? I know you said the s10 but i cant find em…
@@BrokeBoyz_Garage thanks for the response man! I’m about to swap my ‘90 and I’ve heard how easy they are to swap, but i know there’s gonna be those “ have to have” parts in order to make it possible. You’ve done a really good job getting in depth with the OBS. Really looking forward to the future OBS videos and have enjoyed them so far! Seeing stuff like this Camaro is pretty awesome too!
@45HEATERZАй бұрын
How many grounds did you do?
@BlancaFlores-n8v Жыл бұрын
What year of the S10 truck did you order the long tube headers for your swap ?
@dallaslehr8893 Жыл бұрын
I dont think those are long tubes.
@sschevmale24 Жыл бұрын
What tranny did you use ? Did you need to midfy it
@thaynebrayton77612 ай бұрын
I need a harness
@chevrolet3558 ай бұрын
I did a ls swap on my old 56 chevy truck. I had a friend disable vats but everytime i would start it, it would run like shit and die everytime. Have no idea what it was from
@saleen21028 ай бұрын
It's needs a tune not just the vats taken off
@edchamberlain807311 ай бұрын
👍
@trentdawg2832 Жыл бұрын
You might as well start putting some money aside and start saving up for a terminator x…….trust me….them factory ecu’s suck balls…..nice job on the swap though…it wont be long until you put that terminator x on along with a couple PSI of boost……it usually snowballs that way!!!…..ask me how i know
Hi Nick , had some questions about my first ls1 swap on a 68 Camaro and possibly purchasing the harness and pcm from you . Please check your email.Thanks .
@thomasr2046 Жыл бұрын
Promo_SM 😚
@YampiLebron8 ай бұрын
I need the harness and computer for an LS 6.0 engine from 2005