So a 427 makes more power then a 302. Who knew? That was 30k well spent. The real winner is Summit Racing, apparently.
@gavwilldo5 жыл бұрын
177SCmaro not always the case, have you seen what people are getting from a 2jz, and it’s half the capacity of an ls
@hydrocarbon82725 жыл бұрын
The funny part is all but the 4.8L vortec would likely have also beat the Coyote (edit: meaning 5.3/5.7/6.0/6.2 would, 4.8 wouldn't), if specific output was similar. Would saved a lot of cash.
@tracym4275 жыл бұрын
Hydrocarbon82 That’s what I would love to see!!! The 4.8 out do the 5.0 coyote! Maybe that would shut em up! Lol
@bryanmayes92345 жыл бұрын
I bet a built up 4.8L would eat that yote up
@juanwong44785 жыл бұрын
All this talk about the 4.8 doing better that a coyote. Why didn’t they do it this time around? I’m all about American muscle, but people have to be realistic. If your going to do a show and compare, the 4.8 hell the 5.3 against the coyote would have been a better comparison.
@brianfrost3035 жыл бұрын
I'm shocked. Shocked i tell you!! Never in my wildest dreams would I have guessed that a 427ci with aftermarket block, crank, heads and a 10 rib belt driven blower would make more horsepower than a 302ci motor with factory block, crank heads, smaller blower with a measly 8 rib drive.
@fastnasty66275 жыл бұрын
Excuses. That's why i'm here, for the excuses. Well thought out and sarcastic, But excuse none the less. LS had TTY head bolts,yeah real aftermarket.
@EGGINFOOLS5 жыл бұрын
Sounds like ford should make a more affordable setup
@TRB02ss5 жыл бұрын
The only question i have why does the coyote look like the size of a 460 and makes power of a 5.0 wait a minute !!! You guys ford is stealing from mustang owners . They make them think is big when in reality they have small balls!!!!😂😂😂 sorry ford owners .
@raymondkaczmarek56315 жыл бұрын
So a big block sized engine makes more power than a small block. Damn that's scientific.
@m.c.99915 жыл бұрын
302 vs 427 ????? Seems like uneven battle to me. Next up for testing is the Briggs and Stratton one cylinder 125cc vs, the Hemi 392. Stay tuned to see who will win the tuff battle.
@nwscrew635 жыл бұрын
427ci vs 302ci, ummm really, kinda knew how that was going to turn out.
@willf28965 жыл бұрын
7.0 vs a 5.0? Really? I dunno, mabye a 5.3 vs a 5.0 would have been a better apples to apples?
@bobjimboney48445 жыл бұрын
Cubic inches aren't as relevant as the fact you can barely fit a coyote motor in a foxbody.
@nathan22outdoors85 жыл бұрын
When you have trouble fitting a Ford 5.0L in a car but have no trouble fitting a GM 7.0L then there is a problem 🤣🤣
@scottgray50925 жыл бұрын
Exactly, it is so fricken wide it doesn't fit in anything! Cost is stupid high on top of that.
@coreybell95255 жыл бұрын
had some nut job telling me coyote was only 1 inch bigger than a ls engine lol
@cubano13895 жыл бұрын
Barely but it fits and a properly put together one will make plenty of power. The coyote in this video was clearly out matched on the build side, the ls had the bigger ci advantage, better parts and overall a better builder, they could have gone with a better engine builder than mpr but oh well, both engines are great at what they do and i love em both, both made plenty of power, more than what any average joe will ever use in a streetcar.
@Spad685 жыл бұрын
Lol . WRONG . Hundreds of people are doing it with ease .
@clutchkickpj6935 жыл бұрын
Who would of thought the bigger engine with the bigger pro charger *WOULD WIN!?* 🤦♂️
@danielbrealey29245 жыл бұрын
Apparently, not these moron Coyote fanboi's PJ. Go back to some of the previous vids in the series and scroll down the comments. These Coyote fanboi's were talking it up about how the first shootout was rigged and now that there's boost involved we're going to see the Coyote prevail. I, like anyone who knows anything about engines knew this would be the result. They thought they would win because of "this" or "that"- where's all those shit talkers now? They're the one's hitting the dislike button and not leaving any comments- while quickly going back to delete all their shit talking from previous vid's comment sections... 😅
@peterobinson915 жыл бұрын
Can’t beat the LS size variation and parts combinations. I think the coyote can be fast and make big numbers, but it take 3 times the money. Fuck that, LS all the way.
@e-feezy25075 жыл бұрын
Coyote is a bigger engine than the ls tho, externally
@mbsnyderc5 жыл бұрын
In theory the 4 valve higher rev range is suppose to make up the difference and a bigger pro charger isn't going to help if you don't has the displacement to take it.
@Hoggdoc19465 жыл бұрын
@@e-feezy2507 So?
@xbenxwilsonxhighlights78795 жыл бұрын
People calm down it's a friggen simple comparison. Two V8s pushing big numbers. Just enjoy 😍😍
@RSDX995 жыл бұрын
5.0 Coyote vs 5.3 LS is the real test. 427 LS vs 500 CI Big block would also be a bogus test. This test was a win for Summit Racing sales dept.
@nathan22outdoors85 жыл бұрын
5.3 wouldve still humiliated that 5.0. There are sleeved 5.3s making 1500hp.
@17sanjoeddie5 жыл бұрын
Agreed.....
@Ken197005 жыл бұрын
Should have been a 5.3L LS.
@TZLVredmist5 жыл бұрын
A $4200 Billet intake on the LS.... And Stock headbolts. ??? Did they even count the intake on the LS? The Pro-Charger belt coming off on the Coyote, and unloading the engine is what killed that timing chain. Put some Turbos on these engines, Almost everyone who tries to run a Pro-Charger eventually switches to turbos.
@Ken197005 жыл бұрын
If you're not matching displacement it's not a fair comparison.
@craigruhle50115 жыл бұрын
MMR make over 2000hp out of stock 5lt coyote block heads and crank i don't see no factory chev even looking at doing that
@itsCopello5 жыл бұрын
I own an LS and Coyote. LS is a great engine for its exterior dimensions. Coyote is a great engine for its displacement but is physically huge. Comparing a 427 to a 302 is like comparing a small block to a big block and then acting surprised when the big block makes more power. This video is a stupid comparison. Lets see a stock internal 5.3 go against a stock internal 5.0 if you want a valid comparison.
@nathan22outdoors85 жыл бұрын
Its a competition not a comparison. The 5.3 would also murder the coyote and its an old pushrod design with 2 valves per cylinder vs a 4 valve per cylinder new design motor.
@greggfridline42605 жыл бұрын
Chevy has the 6.2 liter (378) and ford is a 5.0 (302), chevy does make a 427 but I don't they they used that block for this challenge did they .
@jonthoma64395 жыл бұрын
The price was the factor your missing, they had 15g's and ford isnt cheap, thats why it lost, because with more money that mod engine could have made more power
@shaadydog15 жыл бұрын
As it stands right now, SBE vs SBE coyote is not winning kzbin.info/www/bejne/foq6kJ6Get6bn7M As of yet I havent seen a SBE Coyote faster, they just arent as strong as the old 4.6 was, the sleeves just wont take the power like the teksid 4.6 used too. Now they are sleeveless so it wont likely happen moving forward.
@1320crusier5 жыл бұрын
Air is air. The coyote was trying to spin to 9k, LSX to 6500ish. It is perfectly reasonable.
@forestlawrencegrading91545 жыл бұрын
The little Ford did pretty good considering it was a 125 cubic inches shy
@nathan22outdoors85 жыл бұрын
It didnt do good at all. You guys couldnt even put down a competitive number.
@tortol48475 жыл бұрын
Don't forget better flowing heads, twice as many valves and 3 more cams. Stop acting like the coyote didn't have its own advantages.
@southbound1415 жыл бұрын
Ford Chevy mopar. They all make good power and they all break.
@tomcronininc5 жыл бұрын
That's right
@musclebone78755 жыл бұрын
That's a true statement
@bentrishaleemartin9265 жыл бұрын
Right
@El_Chompo5 жыл бұрын
1700hp on stock head bolts holy shit. I've never seen them maxed out before.
@WarhorseS1975 жыл бұрын
Makes me feel better about wanting to make 800 on stock head bolts lol
@Dr_Xyzt5 жыл бұрын
Right! I saw them pulling the heads and was like, "They used stock head bolts, without the 6th bolt upgrade?" On 30 PSI? Holy shit!
@WarhorseS1975 жыл бұрын
@@Dr_Xyzt They used the 6th bolt.
@acolonels39765 жыл бұрын
I am a ford guy, tired of seeing the comments of should be a 5.3 vs coyote... “to be fair.”...the competition is fair. It’s equal budget vs equal budget. it’s what Chevy has available vs what ford has available as far as displacement modular vs ls. One is better than the other based on preference. But to talk some shit, it did take a 427 to beat a little DOHC 302 haha.
@troysomething20975 жыл бұрын
The lsx is 376 cubic inches not 427
@nathan22outdoors85 жыл бұрын
@@troysomething2097 lmao what? Its a 427 LSX
@bobjimboney48445 жыл бұрын
That little 302 is the size of a 460 haha
@Xoars5 жыл бұрын
Funny that the coyote is both bigger and heavier than the LS. So which motor is really "bigger"?
@stefanl51835 жыл бұрын
" it’s what Chevy has available vs what ford has available" No! Ford has an RY45. The RY45 is a wide bore pushrod engine that can support large displacement just like the LS. So, why not put the LS up against the RY45 instead? That would be better comparison. By the way, the RY45 has already taken on Chey's finest and beat the crap out of it. Look no further than Dirt late model racing. Want to be competitive against the likes of Josh Rchards, Scott Bloomquist, and Brandon Shepard? Your not going to do it with an LS under the hood. If you look under the hood of those cars, you'll find they are almost exclusively RY45's. And as for why displacement matters, in most forms of racing this is one of the metrics they use to define the limits of a class. If you decide to go racing at your local racetrack, you'll most likely find that their classes usually have some displacement limit that defines then. If not, then just get yourself a Sonny Leonard SAR1005 and be done with it, 1000 CID and 2100Hp naturally aspirated!
@gavwilldo5 жыл бұрын
Love how the ford fans talk about the capacity difference, of coarse bigger is better, why would anyone prefer a smaller capacity larger physical sized engine for the same $ and make way less power
@terraboundmisfit5 жыл бұрын
CID wasn't the point DA!
@danielbrealey29245 жыл бұрын
True, but they dob't want to hear "sensible"... They all live in dream land and just windge and bitch that it'd "not fair" because the LS is larger capacity. No one cares sbout hp per cube. It's total and average hp that counts. It's also funny that there are people complaining that they didn't get into an RPM range where the Coyote makes power! I wonder why that is? Maybe because the timing chain shit the bed at relatively low RPM for a DOHC engine. They just don't WANT to face reality
@justinanderson83945 жыл бұрын
Daniel Brealey well it didn’t make as much power it should have because of belt slip, coyotes live way up high and the fact they didn’t allow a cog really hurt it especially. Plus too they decided to use a stock timing chain, hopefully we will see the engines at there fullest once they are back up and running
@Falcon-mc5fs5 жыл бұрын
With a low price ceiling the ls will win, but if you up the limit the coyote will win. Ford motors were first in the 9's, 8's, 7's, 6's and now 5 second zone.
@mauricedavis29055 жыл бұрын
1700 on stock head bolts 😳😳🤯
@christopherweidner35715 жыл бұрын
LS baby
@robertgardner27825 жыл бұрын
That was before it blew. Only they know the number that blew the head off.
@terraboundmisfit5 жыл бұрын
BFD!
@mauricedavis29055 жыл бұрын
@@robertgardner2782 true! But that's crazy power i thought they would have put arp studs in it. Hell the ford has sleeves🤔
@clutchkickpj6935 жыл бұрын
@@robertgardner2782 that is the number that blew the head bud
@als98au5 жыл бұрын
427 LS vs 5.0 coyote . That was always going to be close . Put a 5.0 LS vs Coyote and re try the experiment.
@ramairgto725 жыл бұрын
The LS should just use the Coyote for a supercharger....
@zerohourdrift5 жыл бұрын
Elliott Feaster lmao not true at all... a stock 500 dollar 6.0 ls will take over 1000 hp easily. Motor trend ran one, and made 1600 hp... 100% stock. It’s been a dyno mule for like two years and has had zero issues. What coyote can do that? Even the junkyard ones are over 3000 dollars all day
@anthonywebber22115 жыл бұрын
@@zerohourdrift dude the 4.8 is capable of 1200 HP After eclipsing 1,200 hp, we kept going. Raising the boost beyond 27 psi resulted in what we suspect was an ignition failure www.hotrod.com/articles/hrdp-1109-stock-gm-ls-engine-big-bang-theory/
@theCANaDiAN19875 жыл бұрын
I like both Chevy and Ford so this was fun to watch. Both are great motors but honestly I knew from the get go that the LS had the advantage here. More cubes and it’s just a proven winner. That being said I love my Coyote F-150 and pretty much anything that has a coyote in it too. It’s a little beast
@crw36735 жыл бұрын
So this proves sloppy mechanic point. Factory torque to yield bolts, are good enough for 1000 hp or less engines. Bolt let go at 1700+ hp and after multiple runs!
@georgedillon17685 жыл бұрын
I’m confused as to why the Coyote didn’t get a bigger supercharger
@ck78025 жыл бұрын
I think the engine builders got to pick the supercharger based on what they said in the video. Procharger and the coyote builders chose the smaller supercharger. Kinda wish the rematch would have gone with the f1x that the LS used instead of f1A94. f1a94 says it is good for about 1300HP and really that is what the coyote made. Time to go bigger I would say.
@Spac3Monkey5 жыл бұрын
Ask the engine builder. They picked it.
@DaBuGzLiFe5 жыл бұрын
Because dohc shit the bed with a small one. Now imagine a bigger one.
@howabouthetruth21575 жыл бұрын
@@DaBuGzLiFe DaBuGzLiFe.........EXACTLY. The Coyote is a great little motor when considering HP per cubic inch. But it costs a damned fortune to buy, and another fortune to have built right, because all those extra cams, valves, chains, etc are such a pain in the ass to get just right.........and when "something breaks"....usually a whole lot of other shit is destroyed right along with it. AND FOR WHAT. When a fella can build a cheaper, easier, more reliable motor with MORE cubic inch power potential that can live through certain failures such as pushing a head gasket. That LS only needs the deck & head resurfaced, along with the ARP head bolt upgrade. Now it's gonna cost a small fortune alone, just to fix that Coyote motor. There's just too many moving parts in that INTERFERENCE design of the Coyote to cause catastrophic failure that is much harder to do to the simpler, more reliable LS platform. I don't "hate Fords" at all........I just can't stand those "Ford or die" whiners. Most of those guys can't even afford to buy & build a Coyote racing engine anyway.
@DaBuGzLiFe5 жыл бұрын
@@howabouthetruth2157 well said. I'm a Chevy fan, but I don't hate on the Ford's. I've seen some pretty amazing coyote builds but are expensive as hell but it makes no sense to build since LS engines are more reliable in the sense of being OHV and cheaper. I'd rather have cheap and reliable than have an expensive pain the the ass. Lately I've seen at least two mustangs catch fire after burnouts online. I'm not sure what's going on but looks like a possible recall besides the dudes driving them being idiots lol
@mz61875 жыл бұрын
7.0l with bigger charger vs 5.0l with smaller charger, not hard to tell who’s gonna win that one.
@EGGINFOOLS5 жыл бұрын
They had the option to pick the bigger blower. Why didn't they I wonder?
@CyborgbobaFett5 жыл бұрын
Yeah but with pro chargers, the higher the rpm the higher the boost provided your belt don't slip. Usually the coyote rpms 1500-2500 more then LS motors can. And it was not that much smaller of a charger. It just looks small because the 5.0 is a giant engine.
@EGGINFOOLS5 жыл бұрын
@@CyborgbobaFett The LS had the bigger charger on it. Model wise
@nathan22outdoors85 жыл бұрын
Coyote has double the valves and the blower size was their choice.
@CyborgbobaFett5 жыл бұрын
@@EGGINFOOLS I know it was bigger, I am just saying it is not as big of a cfm difference as some people are making it seem like. They are both sizeable chargers.
@tonymccoy97865 жыл бұрын
The engine you used is from an f150 not a mustang 2 different engines one is for high torque low rpm the other high horsepower high rpm or maybe you should use the 5.2 engine or the new 7 liter Ford engine displacement against displacement
@matthewf19795 жыл бұрын
Imagine if they used better head gaskets, head bolts and a high strength cam drive kit. We live in a blessed time, boys. The Horsepower Gods have granted us regular folks a dream unattainable 10 years ago.
@BadAssEngineering5 жыл бұрын
Its called Free Market, And the Gods of Speed approve
@stlchucko5 жыл бұрын
All it needed was head studs instead of bolts. It literally would have cost less than $200.
@ziptiejedi56585 жыл бұрын
I love all the Chevy haters saying the only reason the Ls won is because it has 125 more cubic inches. I wonder what excuse they use when a 2.0 liter civic or focus gaps their mustang in a race.
@jimmiestyer22625 жыл бұрын
Ziptie Jedi That's fucked up but funny. And I own a 03 cobra LMAO
@ziptiejedi56585 жыл бұрын
@@jimmiestyer2262 I couldn't help myself lol. Even though my heart lies with Chevy I like all makes and models. It kills me when the diehard brand loyal dick riders try to make all the excuses for why their particular brand lost. I don't cry when I got gapped by a 03 Cobra and say its only because its got a blower lol. I just get mad at myself for not spending my rent money on that third stage of Nitrous I've been wanting. Alot if theses so car call guys should know if you want to make more hp then the next guy all you have too do is spend more money then he did lol.
@jimmiestyer22625 жыл бұрын
Ziptie Jedi I'm the same. Im a Ford guy but I like them all. They all have there pros and cons. People do take it a little to far. Like you said, all performance you can have comes down to how deep your pockets are. Heck, as I type this I'm changing the fluids in my T-56 and notice I got a front timing cover leak. Being a 4.6 I'm not looking forward to cause I can be real and admit it's going to be a bitch to reseal😆😆😆
@ziptiejedi56585 жыл бұрын
@@jimmiestyer2262 Man I don't envy you right now even though I would love too have I would hate to have to work on that 4.6. Like you said they all have pros and cons. 03 cobra pro is its a badass car but a bitch to work on. Good Luck bro I see some swearing and possibly a few tossed wrenches in your future regarding that timing cover lol.
@someonewhatever6115 жыл бұрын
When your comparing apples to apples it matters. Fords 289 302 has beat many 350 400 chevy engines for decades at drag racing. The new 302 could still beat it with enough money and more boost. It is simple math. If you have good flow thru the air pump a larger pump turning the same rpm will run more air thru.
@williamhare91045 жыл бұрын
I think LME had a little too much faith in stock head bolts. But it is pretty impressive they handled that much boost before failing. They could have traded off that stupid intake for a more budget friendly one and put the $300 saved in ARP head bolts. I doubt that intake was worth any significant HP #s.
@tdsanders895 жыл бұрын
Would love to see a stock block/crank/heads shoot out. No budget
@jsomething25 жыл бұрын
why? if you have no budget. why would you not use the best parts on the shelf?
@tdsanders895 жыл бұрын
@@jsomething2 ha wouldn't do it with my money. It would be for testing purposes only
@tdsanders895 жыл бұрын
@@jsomething2 you know, instead of a coyote vs an LSX with brodix heads
@jsomething25 жыл бұрын
@@tdsanders89 give it a few years and when they offer aftermarket Ford heads and better block. you'll change your mind about trying to use stock parts on a 1500hp build that would cost you more like 30k in the real world, not this fake 1500$ stuff. you only care about what stock parts make when you either are throwing together junk yard builds for fun. or they just don't make anything else yet. take the gen 1 Chevy world. the aftermarket blocks are almost the same money as a stock block after all the machine work to hold big power. you'd be straight silly to not use the common aftermarket parts when 2 or 3 different companies make them.
@tdsanders895 жыл бұрын
@@jsomething2 Oh I have no problem with aftermarket parts, and I have a bunch of them in my garage. I'm just pointing out that this competition was apples vs oranges. I actually laughed when they built this LSX masterpiece and then insisted on running the GM headbolts. And you're definitely right about budgets....my cousin just built a 15k short block...4.6 dohc and he doesn't have enough money to break it ha
@georgeloyie74565 жыл бұрын
I'm all about GM, been faithfully driving GM stuff all my life be it a '59 Impala SS or Silverado in the good times, or a Chevette or rusty beat down S10 in the bad times haha! As a fair playing man I'd like to see the 4.8 LS go up against the Coyote with the same budget, now all BS aside: that would be fair, not unfair like the 125 c/i advantage for the LS, sort of like a heavyweight contender stepping into the ring to fight a lightweight contender, odd shit to see... I mean come on guys, a friggin 427 against a 302? The Coyote should be given 5 points just for having the heart to show up haha! I mean the LS is as good as it gets for a production pushrod engine. We thought we had it good with our snappy and reliable 283s, 327s and 350s but when the LS engines came on the market we were truly amazed! Us GM guys got ourselves ANOTHER whole engine family that's just as parts interchangeable as the 1st generation! My old 1970s TH400s bolt up to them and I can go on and on. The very 1st LS engine I ever had was in a 99 Chevy extended cab 1/2 ton 4x4, the guy selling it swore it was a 5.3, well he lied and it turned out it was the smaller 4.8 liter engine. Didn't really matter because when my buddies and I would head up into the mountains for work that little pick up truck ran circles around my buddies built up trucks and at that time I still thought she had the bigger 5.3 engine haha!! Anyways, try a little harder to keep these engine vs engine competitions fair because the cubic inch spread in this particular competition was in a word: ridiculous.
@shrapnelcoatedhalo15035 жыл бұрын
I dig both motors, but tbh the LS platform is just a better dollar/hp engine. That being said, I am pretty happy with the fact that American V8 engines are the best in the world, dollar/hp& reliability wise. My only wish is they would have done a Dodge as well. They all kick ass.
@The_Rutabaga5 жыл бұрын
I don’t know why fanboys of both sides are talking trash about each other. The tuning wasn’t all that impressive and the budget limitations don’t show what what either of these engines are truly capable of.
@robertjohnson47845 жыл бұрын
They pick two of the top engine builders in the country to do this shootout which in turn means they specialize in their field of engines LS or coyote. So let's not cry and say if they had let somebody else build the engine it would have done better these guys were the best of the best in their field. Next the Ford guys are going to cry and say the LS has way more cubic inches but they won't talk about the coyote having 4 camshafts 4 valves per cylinder having an advantage in the head Department as far as air flow is considered. Both engines had problems the LS had a head bolt problem if they had used ARP head bolts it still would have been running the coyote broke a timing chain a rocker arm and probably bent valves you can keep the 4 camshafts in all the timing chains just to prove that all those extra moving parts will create problems especially when you push an engine at higher RPMs the ls whoop the coyotes ass and would have kept going if it had ARP head bolts a junkyard 4.8 LS would have made more power then the coyote so come on let's hear more excuses from the crybaby Ford
@danielbrealey29245 жыл бұрын
Very true brother. Very true. They are a bunch of cry babies
@zachglick5025 жыл бұрын
There's no replacement FOR DISPLACEMENT!
@NiteHawk8615 жыл бұрын
Sure run high boost but don’t use head studs. What an ass backwards setup The win should have gone to the motor that didn’t blow up. Oh wait, they both blew up
@brandonb85435 жыл бұрын
Arp studs?! They needed that $4500 intake man. Lol yeah it was kinda disappointing huh
@177SCmaro5 жыл бұрын
@@brandonb8543 and only 200 bucks for a pair of heavy duty secondary chains for the coyote.
@enigmacamaro5 жыл бұрын
@@177SCmaro agreed I love my ls platform but even I know the timing chains need to be heavy duty, and the ls should have atleast had some china studs in it. summit truly won in the end of this debacle.
@MaddJakd5 жыл бұрын
@@enigmacamaro It's almost as if you guys didn't pay any attention to the stipulations at all in this particular scenario........
@mikekilgore12895 жыл бұрын
Both engines failed to me. None were street-able because they never lasted more than 10 pulls. I still cant believe they didn't use arp bolts. even my 500 hp NA ls has full 8740 studs. Cant put a price on piece of mind.
@299charles5 жыл бұрын
I think most of the People here in the comments are missing the POINT. $15,000 was given 2 both teams and told build what u want??? No one said Ford had 2 go with a 5.0 that was there choice...
@itsyaboia-dub11205 жыл бұрын
Um... I believe the title says "LS vs Coyote". Side note: LSX is not a LS.
@jacobsmith46175 жыл бұрын
The series is coyote vs ls. You kind of have to go with a 5.0.. lol
@nathan22outdoors85 жыл бұрын
@@itsyaboia-dub1120 You do realise the " x " in LSx just means its a more performance oriented motor made for 4 figure numbers. Its the same design as an Ls.
@jmv20155 жыл бұрын
charles did you even bother to read title description? lmao
@nathan22outdoors85 жыл бұрын
Good thing that coyote had its 8hp advantage from the weight of the oil..... really made the difference....
@tubehead82035 жыл бұрын
🤣🤣🤣
@corystansbury5 жыл бұрын
Yeah, and from eliminating the piston squirters!
@EGGINFOOLS5 жыл бұрын
The timing chain was holding them back so they took one off
@chadkangas985 жыл бұрын
Talk to MMR they know how to properly build a Coyote
@sonnyday67275 жыл бұрын
Everyone knows the LS was going to win, there's no replacement for displacement.
@samdoesthefunstuff71225 жыл бұрын
I hate when the belts slip on my turbos...
@Honoer5 жыл бұрын
Bigger engine, more boost, more power. Wow I’m surprised.
@nathan22outdoors85 жыл бұрын
Even on its lowest hp pull it wouldve won. You do realise your garbage coyote shit the bed at 1300hp right?
@rileyneufeld70015 жыл бұрын
@bigpigslapper Oink More power than the f1a-94 blower could muster. I wish they would have gone turbo instead of a procharger. The coyote platform just doesn't do well with belt driven designs.
@bigmatlock625 жыл бұрын
I would like to see a 5.0 litre LS compete in a fairer comparison almost 2 litre difference is hardly fair. Or extrapolate the difference by dividing the LS numbers by 1.4
@gmrtg14145 жыл бұрын
Both have pro's and con's American Horse Power for the win!!!!!
@danielbrealey29245 жыл бұрын
The flaw with the Ford is harder to fix than just simply using ARP head studs. All these cry baby Ford fanboi's can shove it up their arses- 400hp short. Hp per cube NOTHING. Hp per cube don't win races, does it... 😅 And after all the shit talk from you Ford fanboi's. You guys thought you were going to own this comp. Couldn't have been further from the truth
@SoundFaithStudios5 жыл бұрын
@@danielbrealey2924 what is with you LS fanatics and your logic? First off, the coyote didn't get the best chance to show its max potential, secondly, good fucking luck with traction with the LS unless you are on a extremely well prepped track.
@CJColvin5 жыл бұрын
Amen to that brother.
@matteatmon55585 жыл бұрын
@@SoundFaithStudios When your making over well over 1000hp i don't care what it is the only thing it hooking on is a well prepped track.
@SoundFaithStudios5 жыл бұрын
@@matteatmon5558 it's easier to manage traction with a engine like the coyote. Makes peak torque high in the rpm range. The wheels have more time to gain speed before peak torque occurs. In the LS's case, 1500 lb ft of torque at probably 4k or less is a tire shredder. Nearly unusable unless you have a chassis, suspension and tires to match.
@damonrice84695 жыл бұрын
I disagree with the results. Both engines should have been closer to same cubes. Ijs. Both are very stout engines and both makes real good power.
@donogoobo99925 жыл бұрын
WOW! No news here. Should have started out with a 6.2 Raptor engine. But that is not what this is about. Is it?
@hotrodtodd76095 жыл бұрын
Would of been nice to see the cubes closer to each other to get a better comparison.
@CG_Element5 жыл бұрын
This comment section really shows how cocky Chevy guys are lol. If the coyote would’ve won I don’t think I’d see so many comments calling the LS “trash” like I do with the coyote. Ford guys (for the most part) will recognize that the LS is a good engine, but Chevy guys would rather die than give the coyote a compliment.
@bentboybbz5 жыл бұрын
Yea really. I dont understand all of the hate. Im a ford guy but the ls is a proven design and obviously a great platform to make power. I just think the ford was an interesting setup that you dont see as often. Really as long as it has fire noise and power im down lol. Something ive not seen in a long time is a built chrysler. "Searches youtube" XD
@viziocamaro5 жыл бұрын
I'm a Chevy guy and I think the 5.0 Is a bad ass motor.
@CG_Element5 жыл бұрын
bigpigslapper Oink I saw way more many comments from Chevy guys throwing at the coyote even back in the first episode.
@bentboybbz5 жыл бұрын
I like how you group everyone together. I ❤ you anyway.
@rodhagen93935 жыл бұрын
Even on a street build I would use a cogged belt to run the supercharger.
@alexb.13205 жыл бұрын
Exactly. When did cog belts suddenly become "race belts"?
@CanadaBud235 жыл бұрын
A lot of people do actually. Why even sell such a thing at these levels. Anything over 600HP should be cogged in competition. I'd would stop using a ribbed belt at 500HP.
@177SCmaro5 жыл бұрын
What was really weird is they explained that they (arbitrarily) allowed 12 rib belts for the superchargers, then tried to use tiny 8 rib belts on 1000+ hp, high rpm engines engines WHILE knowingly over-reving the superchargers. Da fuck did they think was going to happen? It's sure nice to think that someone is throwing tens of thousands of dollars at theses guys who have no idea what they're doing and set up arbitrary rules only to not bother with following them meanwhile people like you or I have to spend a month or more working and saving up for that one really awesome part we need for our own projects.
@vickinaylor23985 жыл бұрын
Street blower.???. 1400 HP .more like race spec to me
@persioabreu73765 жыл бұрын
That LSx was $50 away from breaking 2000HP and maybe 1800TQ or 1900TQ. If LME had even grabbed ARP head bolts instead of using those factory TTY bolts it would have held. Studs would be better though.
@tortol48475 жыл бұрын
Yeah honestly ARP bolts/studs should've been number one on their shopping list the moment they said supercharger. I don't know what they were thinking.
@nathan22outdoors85 жыл бұрын
@@tortol4847 I dont think they expected to be in the 1800hp range. If they were making 1500 or 1600 Max the factory headbolts wouldve been ok
@gearwrench1davis3925 жыл бұрын
I'd hope the LS won. Only took over 100 more cubes to pull it off. 5.0 vs 5.3 would have been a better test
@9090ruby5 жыл бұрын
Like the extra cams, valves, and rpm doesn’t make a difference
@Spac3Monkey5 жыл бұрын
Not their faulty ford doesn't make bigger engines.
@juicebox85495 жыл бұрын
@@Spac3Monkey exactly, they dont have to lol
@EGGINFOOLS5 жыл бұрын
@@juicebox8549 Clearly they do. Or didn't you watch the video
@canabox71125 жыл бұрын
The Ford engine is fucking huge and wouldn't fit fuck all
@Mansimran245 жыл бұрын
I used to own a 2017 camaro ss with a whipple supercharger and I traded it in for a 2017 5.0 mustang. Now it has a 2.9 whipple stage 2 and it makes a ton of power. No regrets at all. The power band of coyote is much better than the LS
@EGGINFOOLS5 жыл бұрын
I used to own a coyote mustang. I got sick of the lack of low end torque. I sold it to my mom and bought a 18 SS 1LE. Gobs of low end power and cheaper to mod. Never looking back
@CoyoteFTW5 жыл бұрын
EGGINFOOLS - I don’t think anyone likes to change gears at 2k rpm. By the time your done putting torque down I’m still climbing and gapping your little camaro. Camaro’s aren’t even a challenge for Mustangs. They never have been. That’s why you chebby girls love comparing them to corvettes
@TheDivergentDrummer5 жыл бұрын
Interesting Vid, But that Overlay is distracting and it makes those sections hard to watch. We get it, you are recording. We can see that....We are here watching it.....
@cfltitan5 жыл бұрын
God those are some impressive numbers! Especially that wicked ass LSX! I can't wait to see them back all fixed up.
@erniemendoza10395 жыл бұрын
You know i would love to know where you can buy an 427 lsx for 15k.... 😂😂
@iantrinidad1185 жыл бұрын
check summit. lsx block from chevy performance is $3700
@austinhowze62805 жыл бұрын
This guy they pulled parts off the ground to meet there budget
@jasonfields27935 жыл бұрын
All based on summit retail price so the numbers are right
@jmcg79065 жыл бұрын
How much was that ls intake that they threw in for free?
@hunterparrish2775 жыл бұрын
J Mcg www.latemodelengines.com/parts-services/intake-manifold.html
@rahsaanmoore629 Жыл бұрын
Ford makes a 7.3 now. Just saying it's more fair for displacement
@frdbtr5 жыл бұрын
No replacement for displacement. The LS made more torque than the coyote made in HP.
@deanfisher7335 жыл бұрын
Stroker Windsor for me over both of them any day
@benjaminkessler81695 жыл бұрын
that wasn't a power comparison, it was a material fatigue stress test. not more, not less. having such different setups is useless to compare
@nathan22outdoors85 жыл бұрын
Its a competition not a comparison.
@Riptidevulture5 жыл бұрын
Wait , did I get that right - it's 12 to 1 compression ratio and they put a blower on it ? That's crazy !
@bennyjames50905 жыл бұрын
I'm a diehard FORD MAN but a loss is a loss.
@JoshuaHowley5 жыл бұрын
No replacement for displacement. Glad this finally got posted.
@OehlJim5 жыл бұрын
The only reason to compare a 427 engine to a 5 liter is so there is no chance you will come up second best! Apples and oranges!
@nathan22outdoors85 жыл бұрын
Doesnt matter if its a 7.0 vs a 5.0. Still only took 15k to build. And the coyote has double the valves.
@my87z285 жыл бұрын
Only budget stoped MPR from boring and stroking the coyote. Both were given $15k to build the baddest platform specific engine they could. By forcing a CID handicap on the LS, what handicap would you impose on the coyote?
@specforged56515 жыл бұрын
Nathan22 Outdoors...I know right...if they would just make an engine with 6 or 8 valves per cylinder that would be better than any 2-4 valve right? Good god...do you even realize what you are saying? That’s like saying it would make all the difference in the world if there were 2 spark plugs per cylinder. The number of valves is absolutely the last thing in relation to power on this test.....or any test within reason for that matter. Have you ever seen a 12 valve Cummins make more power than a 24? Ya me too.
@shaadydog15 жыл бұрын
@@specforged5651 Valve curtain has everything to do with it fuqtard, why do you think an equally sized 5.2 4V v10 spanks the Ford 5.2 doodoo V8 by 100 hp? Even on a signifigantly smaller bore the v10 has a 100 more hp, having 4 more intake valves is a huge advantage when pumping air.
@coreybaldwin1685 жыл бұрын
@@my87z28 There was no CID handicap imposed on the LS. The Coyote was handicapped by it's smaller displacement and smaller procharger.
@DS-ss7vl5 жыл бұрын
They didn't mention all those BENT valves in that mod motor. #longlivepushrods
@stlchucko5 жыл бұрын
...and the scarred pistons.
@justplanefred5 жыл бұрын
I think it would have been more interesting if LS was similar in displacement. Like using a 4.8 or a 5.3
@nathan22outdoors85 жыл бұрын
Still wouldve won.
@jeremymanuel81365 жыл бұрын
Hahaha look at the price range of both engines...
@motodiesellife93035 жыл бұрын
Nathan22 Outdoors lol.
@N4CR5 жыл бұрын
Yes, lets compare a $300 engine vs a few thousand dollar much newer 5.0! Why not make the Coyote OHV to keep it fair then... you see where that goes? It's an inherent advantage of the LS to fit more cubes in a smaller package.
@JsGarage5 жыл бұрын
Definitely not the best coyote run I’ve seen. Let’s be real though 5.0L vs 7.0L why would the results be any different. I honestly think budget is the one of the big differences on these power plants. And for the more realistic sub 1000 HP builds the coyote is a really fun engine. Both great engines not sure why people have to be such fan boys. I love any great engine.
@LeviGarrett_5 жыл бұрын
Jay P I agree, I see it as more of a stylistic decision. All personal preference and wallet size in my opinion.
@bryanmayes92345 жыл бұрын
I think a 4.8L with that budget woulda destroyed the 5.0L
@JsGarage5 жыл бұрын
Bryan Mayes if a 4.8L is left a 4.8L it would not destroy a 5.0L coyote regardless of budget. The only reason the LS can out perform the coyote is the big displacement advantage in 6.2 and 7.0L sizes. It wins on budget because of single cam push rod design. Just because the LS represents better value doesn’t mean it’s simply the better choice. I like both engines really and can see arguments for both platforms. Better is definitely a matter of preference or other criteria.
@JsGarage5 жыл бұрын
Levi Garrett absolutely. I’ve seen coyotes put down more than the one here but probably had larger budgets.
@bryanmayes92345 жыл бұрын
😂
@gergozichy23705 жыл бұрын
Should do an LS vs 392 Hemi...🤔
@GOFASTER695 жыл бұрын
"You know where to send that trophy", yeah not to LME for using stock head bolts.
@mikeskidmore67545 жыл бұрын
I wondered why they used 11to 1 and 12.25 to 1 for Blower motors.. at 30 PSI ,, but they Finally they mentioned they were using E-85 /.... Still seems like too much compression ration for 30 psi boost .. why not be realistic and use a wider belt ?
@stefanl51835 жыл бұрын
Yeah, usually in a supercharged motor, it's better to use more boost and less compression. no matter what fuel you use. If these guys knew much about engines, you'd think they would know this. More boost increases dynamic compression, but it also packs more fuel and air into the cylinder. So, boost trumps static compression when your goal is to make more power!
@whome81925 жыл бұрын
$50k engines up in smoke on the Dyno before they can hit the street or strip. There are no winners. Should have not declared a winner.
@nathan22outdoors85 жыл бұрын
"Before they can hit the street or strip" ??? Its an engine dyno competition, i dont think these were ever planned to be in cars and they pushed these to the limits on purpose, if ut was in a car made for racing they wouldnt have pushed it to the max and wouldve left it at a reasonable and reliable power level
@howabouthetruth21575 жыл бұрын
Wesley..........You're speaking complete NONSENSE. It's painfully obvious that you have no clue what kind of punishment they just put these 2 engines through on that dyno. Besides, there were NO plans of running them on a race track, and besides, the numbers don't lie, the LS would've won anyway. There is no replacement for displacement. Cubic inches always win when both platforms have the same power adder budget. Furthermore, you can't blame the LS engine over a lousy FACTORY STOCK HEAD BOLT FAILING. And no one being totally honest can give the same pass ( good excuse ) over a broken chain on the Coyote, because MANY other internal parts were destroyed due to the design of the Coyote being an interference motor. When something breaks, usually A LOT OF OTHER SHIT is going to break right along with it. In other words, it's going to cost a small fortune alone, just to fix that Coyote motor. The LS only needs resurfacing the deck & head, and new gasket, and then use REAL performance head bolts from ARP like they should've done to start with. Hell, they could've sacrificed by choosing a more economical yet nice high performance intake to cover the cost of the head bolt upgrade, and STILL would've remained within the budget limit to make far more power & torque than the Coyote motor. Perhaps less power with a cheaper intake, but still would've been plenty to beat out the Coyote. Folks, these are perfect examples of why the mighty LS platform is the #1 choice for engine swap all over the world. Cheaper, MUCH easier to build, tons of after market performance support to match any budget, and the engines can live through more failures with less cost to repair.............WITH MORE CUBIC INCHES. This is street/strip racing in the real world.
@whome81925 жыл бұрын
I saw the abuse. They over drove the blower 300 hp and 20,000 rpm over its rated use. Building a $35k to $50K engine (ok 15K in parts, +9K blower, and of free labor and machine work) and then blowing them up after a couple of pulls makes the engine builders look like idiots. They should know how to build engines for a given hp range without it breaking on the dyno like that. They should know the limits for their build. If they don't then find another builder. This was a disaster of a video for these engine builders. And yes, displacement was going to win all along...but it should had won making 1400HP not 1700+ and broken.
@nathan22outdoors85 жыл бұрын
@@whome8192 It doesnt make them look like idiots because they pushed them to the limits. Meaning they basically expected this outcome. Again, if they built this motor for someone to race, nobody pushes it to the limits when racing because pushing an engine to its limits basically means pushing it to self destruction.
@howabouthetruth21575 жыл бұрын
@@whome8192 Wesley........NOW you just contradicted yourself. Ya just admitted the LS was going to win all along. You just don't understand, both of these builders were NOT "building an engine to live".......their PRIDE & REPUTATION was at stake going head to head. They didn't give a shit about anything but MAKING THE MOST POWER using the same budget limit. HOW MANY TIMES DO YOU SEE A WINNER OF A RACE OR A NEW WORLD RECORD WHERE THE ENGINE BROKE AT THE END. ANSWER: QUITE A FEW TIMES. Besides, what the f*ck do you care.......you didn't pay for any of it. And if you believe for one minute that EITHER of these builders would've recommended doing this to any of their real world customers........as if your implying "these guys suck" or "they are irresponsible".......then you're smokin' birdseed. Look at Top Fuel running on nitro methane for crying out loud.........those cats have to totally rebuild every engine after EVERY PASS. So get over it. You just want something to bitch about.
@samduran51805 жыл бұрын
You all are missing the point Ford doesn't make a bigger or better motor than the 5.0. That engine is basically the only engine choice...
@nathan22outdoors85 жыл бұрын
Exactly, unless they want to use the 6.2 out of a raptor but i dont think that has much aftermarket support and its not a proven motor to make high power and be reliable.
@stefanl51835 жыл бұрын
If your using an aftermarket Block, heads, and rotating assembly, It's not a stock engine. So, why not go with an RY45? Tell the Dirt late model world that "Ford doesn't make a bigger or better motor than the 5.0". They will laugh in your face and then show you the RY45 that dominates the class.
@InuranusBrokoff5 жыл бұрын
I like my Fords, but hp per dollar is definitely going to GM.
@dandoyle13085 жыл бұрын
Thanks for your honesty
@specforged56515 жыл бұрын
InuranusBrokoff ...The most intelligent comment yet. Although, as you can see here with some comments, it’s apparent many know nothing more about these engines in the most basic form other than one is built by GM and one ford...that’s about as far as engine knowledge as many commenters get. I certainly don’t know everything as I will gladly admit, but my god it just boggles the mind at some comments.
@fraserhenderson78395 жыл бұрын
The sound of the coyote reminds me of the 30mm gun on a Warthog. What a pair of monsters! This is survival of the fittest for engine components. Will the LS see 2,000+ hp on the next encounter? How much more money will they spend? Turbocharging removes the belt issue, Procharger technology may be holding them back. I would love to see them turned down to around 1,000 hp each and placed in an OEM motor testing cell for endurance testing.
@robertgardner27825 жыл бұрын
It was stupid to only use 8 ribs. A 12 rib cog belt easy day.
@Stewart75165 жыл бұрын
Why didnt both engines get the same break in procedure?
@theaveragejoestinkeringand44075 жыл бұрын
In the long run you will not find a more cost effective power plant then a LS engine. Even if it’s stock if you keep it 25 years and plan on rebuilding it it’s always going to be the cheaper option. The coyote is a great engine if you like that over complicated timing mess. I enjoy messing with engines and I don’t think I would enjoy messing with the Coyote. To me it would be about as enjoyable as assembling IKEA furniture blindfolded. I do enjoy hearing those coyotes scream though As long as they’re not ticking.
@alexowen31405 жыл бұрын
Over complicated timing mess ? Sounds like you don't know how to build an engine.
@theaveragejoestinkeringand44075 жыл бұрын
Alex Owen Well you can make power With that expensive complicated beast and it’s Complex valve train and head’s Or you can make that same power With more cubic inches in an ls engine with a much simpler and so far more reliable design and it fits anywhere.It doesn’t impress me that it’s A smaller engine making big horse power because I’ve never cared for that. Most things I work on now I do it for the enjoyment of it or for a friend. I’ve had my fill of that timing chain bull crap on the Triton V8’s and rattling Toyota 22 re just not my thing. I just don’t care to work on anything I don’t enjoy working on. You can make your power with four valves per cylinder and A complex valve train with less cubic inches I would rather just swing a bigger hammer And Eliminate all those extra little moving parts. Just because I don’t bang fat girls Doesn’t mean I don’t know how it It just means I’ve found something easier cheaper and a lot more fun to do. Just personal preference. I’ll let the other suckers sort out the BS. These things are already blowing up left and right and a lot of times the owners are having to pay to have their new cars fixed Because of denied warranty claims doesn’t sound like anything I want to mess with.
@matthewstansbury30475 жыл бұрын
Manual Truck Man I love working on motors too and I agree 100% making the same power with more rpms and moving parts isn’t better. It’s more complicated, expensive, and prone to fail and especially when you have an oopsie, which idc how good you are it will happen, and I would bet money that coyote would love to kiss 10-11 thousand RPMs. The entire top end would probably come through the hood. I’ve done the 3-2 up shift on my ls motor and it didn’t hurt it a damn bit. It’s been kissing occasional 7grand shifts for two years now and still going strong. The best thing about this video is the reason the ls motor failed because these idiots let it lift the heads and scorch the block. The coyote Grenaded itself by breaking parts. I’ll keep my old school pushrod motors. They can play with their cams and timing chains. I’ll align mine dot to dot in 5 seconds and be on with putting the timing cover back on it
@tomparry43135 жыл бұрын
You think they would have put head studs in the LS. And chains in the Ford when revving 9000rpm. Why would they even show this video with both engines fail? They didn't even let that Coyote work. It woulda made well over 1700hp. Its been done over and over.
@Snip3rinth3mist5 жыл бұрын
That's possible but if they did upgrade the chains and used head studs the Ls would've been over 2k so 🤷♂️
@petrospago35155 жыл бұрын
i love how LS fans are talking shit about the 5.0 coyote even though deep down they are glad that the mechanics quickly give up on the coyote so they can declare the 427 chevy the winner it's kinda hilarious that they don't put the most powerful engine ford had so they can make sure chevy wins plus the fact that GM had sponsored the episode makes alot of sense :)
@Avalanche25 жыл бұрын
Very tight budget = 15k? LOL!!!
@badassgp5 жыл бұрын
Ever build a high hp engine from the ground up?
@thejohnnybob5 жыл бұрын
You're not making 1500hp on an LS for less than $10k unless you use shitty parts.
@BadAssEngineering5 жыл бұрын
Did you see the size difference at 1:06 ? Smaller Package, More available parts, cheaper, More Displacement and Stock head bolts that can hold 1700 Hp, Meanwhile, the Coyote went full Triton 5.4 on those chains. Typical Ford Timing stuff
@pattywalker75975 жыл бұрын
B.S. To be fair they should have used a ford 5.8 liter engine
@frankschneider29505 жыл бұрын
The LS also made much more horsepower and torque than the 250cc Briggs and Stratton. A larger blower on the Briggs is expected to close the gap. (About the same comparison!)
@Drivewaybuilt5 жыл бұрын
Why the F would you build a 1500hp engine and put TTY bolt in it? That's noob level there.
@enigmacamaro5 жыл бұрын
still made over 1700 on those tty bolts...
@Drivewaybuilt5 жыл бұрын
@@enigmacamaro And then made 0hp
@bryanmayes92345 жыл бұрын
Wasn't in the budget obviously 🤔 still smoked the Ford.
@chrismcpherson85265 жыл бұрын
Even if the coyote won, finding something to fit it in is the real challenge! LS FTW!!
@matthewstansbury30475 жыл бұрын
Chris mcpherson no kidding. I read these comments and Thinking 90% of these people slap headers on and call it modified.. Not many people except brand loyalists give a rats ass about coyotes. they are expensive to do anything with. Super complicated internally and dimension wise are as big as a big block and more even more labor making it fit. For a regular guy a LS is the obvious winner just because it’s more readily obtainable, reliable, makes better power and is easy to work on. I can cam slide an ls for a little bit of nothing money wise and in probably 2 hours start to finish. I’m more interested in the new 7.3 gasser Ford is bringing out. Would love to see a new 429 boss next year.
@Roguex9x5 жыл бұрын
When doing the repairs please keep the cost totals for each engine not to mention what exactly had to be repaired
@nathan22outdoors85 жыл бұрын
The LSX has way less to be repaired
@Slider685 жыл бұрын
These comparison videos are very interesting, but they always (at least partially) measure the wrong things, especially when comparing motors with significantly different performance characteristics (especially different rpm ranges). Modern car enthusiasts are starting to properly understand power, torque, how gearing makes torque X rpm (= power) what really matters, and what it takes to actually compare real world performance. To give us a "Real World Winner", why don't you measure and compare the things that really matter, such as (I've also tried to explain why for those old school among us): 1. Peak power & torque. These are really only useful numbers for boasting about (and are worth measuring for this reason). There are very few applications where the motor can always be run at the peak power rpm all the time (CVT transmission, a well setup boat, top speed run, top fuel drag car slip clutch, and not much else). Peak torque might give us an idea how well a motor can move a heavy load without having to rev high, but only when multiplied by rpm does it provide real world useful information since we enthusiasts are willing to make our motors scream (run a 2:1 gear after a motor with 1/2 the torque at twice the rpm and you're back to the same...). 2. Average power over a 50% percent increase in rpm. Average power over a range of rpm is what really matters to serious car enthusiasts. To simplify things, say we have a manual gearbox and need to accelerate from 40 to 60 mph in 2nd gear and then 60-90 in 3rd, then 90-135 in 4th, then 135-203 in 5th. With this vehicle, the engine rpm increases by 1.5x (50%) while in each gear (most manuals and automatics with less than 5 gears average around a 50% rpm increase per gear). One engine may make its best power revving from 4000 to 6000, while another engine might perform best from 8000 to 12000 rpm. With the right gearing it doesn't matter what the actual rpm is, but the percentage difference or ratio between the lowest rpm after a gear shift and highest rpm right before the next shift is what matters. So a very useful measurement would be average power between an engine builder's chosen rpm and an rpm that is 1.5x (50%) higher. In this case the LS might perform best between 4500 and 6750 rpm and the Coyote might perform best between 5600 and 8400 rpm. Calculating the average power over those particular rpm ranges would give us an excellent measurement on how they will perform in the real world. 3. Average power over a 25% percent increase in rpm. Older 3, 4 and 5 speed transmissions needed to increase the rpm by a good 1.5x (50%) per gear, but many modern vehicles have even 10 speed transmissions and need a much smaller rpm increase during each gear. It would be useful to do the same measurement as #2, but with something like an increase of 1.25x (25%). An LS might perform best between 4720 to 5900, while the Coyote might like 6560 to 8200 for the 1.25x (25%) rpm increase range. These measurements (#2, #3 and #4) are far more important than peak power because they measure and predict real world performance. For example, an LS that makes 250 hp at 4500 rpm and 1000 hp at its redline of 7000 rpm, with most street transmissions, will be blown away by one that makes 650 hp at 4000 rpm and 750 hp at 6000 rpm because the average power is much better with the 750 hp motor. People often get confused and say it is peak torque that matters when accelerating, but it is always power that matters. Power just needs to be measured and averaged over the rpm range used. 4. Average power over a 15% percent increase in rpm. When building an all out drag racing car we'll probably have a torque converter that stalls somewhere around 1000 rpm below redline. For example we might have a 6000 rpm stall torque converter with a 7000 rpm redline and a 6900 rpm shift point & 1/4 mile exit rpm so our rpm will always be above 6000 rpm. In this case average power between 6000 rpm and 6900 rpm is what we need to measure. To compare different motors with different rpms, when using this type of transmission setup we now want to compare average power over roughly a 1.15x (15%) rpm range. 5. Rotating inertia of the engine. When accelerating down the track, some of the power goes to accelerating the rpm of the motor itself. Motors with heavy crankshafts and heavy flywheels can waste enormous amounts of hp, just accelerating the rotation of the engine itself. This is why installing a light flywheel, balancer, etc. improves 1/4 mile times. Similarly V8s with lightweight flat plane cranks often have a significant advantage over ones with heavier cross plane cranks. One way or another this should be measured and compared. One "fun" (but still valid) option might be to accelerate the engine on its own between two rpms a percentage apart, similar to the real world power measurements; Say 4000 and 6000 rpm (50% higher) for an LS and another pair of rpms (higher rpm 50% higher than lower rpm) for the Coyote and measure the time in 1/100ths of a second. 6. Width of the engine. 7. Length of the engine. 8. Height of the engine. 9. Mass (weight) of the engine. 10. Specific fuel consumption (hp/fuel burn rate) 11. Cost of the engine (in this particular comparison not required because of the $15k build price for each). 12. Power per displacement (hp/liter). For street vehicles this is really just something of interest or to boast about. For racing, where displacements are often limited per racing class, it is useful to know which type of engine gives us the most power per displacement. Typically more advanced, better "breathing" engines generate more power per displacement, but sometimes more advanced engines suffer from additional complexity and are more difficult and more expensive to modify for maximum reliable power. A perfect example, the Coyote has 4 valves per cylinder, 4 camshafts, 4 timing chains, etc. and is physically larger compared to the LS with 2 valves per cylinder, 1 camshaft, 1 timing chain, etc. The above measurements would give us all of the real world data needed to truly compare and decide which engine is better. To turn it into more of a competition you could apply a weighting factor for each measurement, add them all up, and decide on a "Real World Winner". For those with physics PhDs reading, yes I know average power is a simplification of the integral of power over time, but this "approximation" is still a far, far more accurate way of measuring and assessing real world performance when compared to the peak power and peak torque measurements we are typically provided with.
@dangerousfreedom49655 жыл бұрын
Slider68 👍
@mrjesuschrist2u5 жыл бұрын
Aftermarket vs a modified coyote .... Aftermarket busts budget and gets a by on subjective rules. Points category skewed and borderline not relevant to testing these motor that "are not race engines but something you can drive"
@claas900175 жыл бұрын
Sounds like the coyote still had 2,000 more rpms to go? Belt issues at 7,000 and they where trying to hit 9,000rpm? Motor never got over 7,000 I can’t help but wonder if the belt problems hurt both motors? That kind of shock on the motor can’t be good.
@NateN345 жыл бұрын
To be fair, that is probably why the timing chain blew. 9,000 RPM is a bit too much....even for a Coyote.
@Zekenificent5 жыл бұрын
I enjoyed the builds and give credit to both builders. It would be interesting to see how both engines would perform if they had the same displacement and Procharger headunit.
@waynebollentin9895 жыл бұрын
The coyote would kill the ls if it was the same size as the coyote. They coyote can spin higher rpm and is a much more efficient engine. This motor would have made much more power if it had a cog belt setup also. It wasn't able to take advantage of the high rpm because of the belt slipping so bad. The ls doesn't spin as high so the belt slip was much less. If that's part of part2 where they both run a cog setup and both head units being the same these motors are going to be much closer. Either way you can't lose with either one for them.
@clutchkickpj6935 жыл бұрын
I mean that's a more logical comparison but Ford doesn't have a 7 liter coyote lol
@waynebollentin9895 жыл бұрын
@@clutchkickpj693 they rely on the rpm and DOHC instead of the cubic inches. If you can spin the motor higher you can make more hp with less cubic inches. It's why the coyote does as well as it does. You go back to the 3.8 v6 by Buick and they made 1400hp+ in the 80s and now 2000hp same with the 2JZ'S. Rpm makes up for cubes. When you can combine both rpm and cubes then you have a really bad bitch on your hands. Then there isn't a replacement for displacement lol..
@TripAMD5 жыл бұрын
Godzillas comin soon. He'll put an end to this nonsense.
@mike63ful5 жыл бұрын
There’s no replacement for displacement baby !
@cantastra5 жыл бұрын
Ford Australia’s straight six four litre Barra. Cheers brah.
@taylorgtrotter5 жыл бұрын
So we learned that a 99.9% aftermarket LSX with Brodix heads, a larger supercharger, and 120” displacement advantage can beat a stock block and heads coyote with 120” less displacement, and a smaller supercharger in a dyno race. We also learned that the LSX needs every single one of those advantages to surpass a coyote. Yes Dohc heads make up for lack of displacement, but only to a certain point. Way to keep it non-biased Power Automedia. (Sarcasm) too much to ask for a non-biased test where one engine doesn’t get a huge advantage?
@my87z285 жыл бұрын
You’re viewing this as a comparison. It’s wasn’t, it’s a competition between platforms given a specific budget. Only the budget stopped MPR from boring and stroking that coyote. Also, don’t be mad at the producers at the fact that GM has a much larger aftermarket following than Ford does. Be mad at the aftermarket developers.
@mikevanmeyl1235 жыл бұрын
$15k to build a 427 lsx aftermarket block and machine work get off the pot
@stefanl51835 жыл бұрын
@@my87z28 Let's see the LS go up against an RY45. The RY45 is still a small block compared to the LS being a big block, but at least it's a wide bore small block. That would be a more apples to apples comparison and it would wipe the floor with the LS just as it's already done in the world of dirt late model racing!
@tortol48475 жыл бұрын
So basically you don't want one engine to have an advantage. Which is why you would prefer something like a 5.0 coyote vs a 5.3 ls... at which point you would turn your cheek to the fact that the coyote would have a significant advantage because it is dohc. So more or less you want a competition with perfect parameters for your favorite participant to win. Not really a competition if you ask me.
@taylorgtrotter5 жыл бұрын
my87z28 I purely looked at it as a competition. Can’t bore a coyote past 3.7” where that motor already was. The stroker cranks are only so big, producing 327” engine. That still wouldn’t have given the coyote another 370+ hp. Then there is the blower part of the equation. Coyote heads don’t need aftermarket castings, they’re great from the factory. That aside, there’s a very large aftermarket for coyotes.
@stansilver67915 жыл бұрын
In Factory Stock racing the 5.2L Cobra jet entries have dominated so far in 2019. In a field of 11 Fords entered to 17 COPO Camaros and 3 Dodge Drag PaK Challengers at the Gatornationals. After three rounds of qualifying the Cobra Jets held down the top five spots, with Bill Skillman setting the pace at 7.74 at 172.96 mph. Bill was trailed by Carl Tasca (7.75/178.24); Chris Holbrook (7.77/178.05); Randy Eakins (7.78/178.64); and Drew Skillman (7.82/175.11). Skillman went on to win the event. Yes, the little Coyote can hang.
@nathan22outdoors85 жыл бұрын
We know the coyote can hang.... thats kinda why all the fanboy excuses saying it has a displacment disadvantage is completely irrelevant.
@shaadydog15 жыл бұрын
Really? NHRA is making that their form of WWE, they control that shyt week to week with BoP to keep everyones interest. It literally proves nothing. "Note: NHRA may make adjustments to (minimum weights, supercharger pulley ratios, etc.) at any time to control performance and maintain parity within the category."
@EGGINFOOLS5 жыл бұрын
I mean, did the DOHC guys really think they would win? The LS made more torque than the coyote made HP. 🤣😂🤣😂
@177SCmaro5 жыл бұрын
I hope the LS won. It had over 100ci on the 5.0 (not to mention a bigger supercharger running more boost). What's telling is the 427 didn't win by a very big margin. Lets you know how well those 4v engines run for their size.
@wisco12255 жыл бұрын
177SCmaro well the coyotes are huge soooooo
@guyl92085 жыл бұрын
427 vs 302. Good win lol. I do wish Ford would make a 7.0 Coyote. But I think big the ci days are gone :(
@clutchkickpj6935 жыл бұрын
@@wisco1225 huge is overall size is not the same as huge in ci's moron 🤦♂️
@465fire5 жыл бұрын
@@177SCmaro if you forget about the displacement the ls destroyed the coyote. If you account for the displacement the coyote probably would've took peak power but ls probably would have took average
@noneticusindustries30825 жыл бұрын
i like the coyote engine but come on there is 5.3 junkyard engines making 1500+ hp so in boost form i expected more from the coyote
@austinhowze62805 жыл бұрын
Theres a 4.6 making 2500hp should see more out that 427 but you know
@terraboundmisfit5 жыл бұрын
That junk yard ls might make 1500 one time!
@bryanmayes92345 жыл бұрын
1 time with all stock internals. And tty bolts with 300k+ miles
@clutchkickpj6935 жыл бұрын
@@bryanmayes9234 1500hp stock internals my ass. You're a fucking moron ffs
@clutchkickpj6935 жыл бұрын
So you say 5.3 makes 1500+ but that's a built 5.3 but then your mad that you would expect a smaller built 5.0 to make more hp? Your expectations are pretty flawed buddy. Fyi that coyote was nowhere near done with how much more hp it could have made if it didn't have a timing failure.
@jmtmotorsports31735 жыл бұрын
Coyote is a stout motor that may be able to win a battle here and there, but it’ll never win a war! To small and to many little moving parts to fail. Can’t match the efficiency of a monster LS either... Grandpa didn’t tell y’all “There’s no replacement for displacement” for nothin! And in my opinion, If you wanna compare apples to apples, Horsepower Wars 3 can be a 5.3ish coyote vs 5.7 LS1, both built and with budget boost again. Ford fans can’t really cry cubic inch cuz history has shown since the 80’s, even earlier, it was a 302 Mustang vs a 350 Camaro.
@thedude46325 жыл бұрын
JMT Motorsports ya you did not compare the 351 to the 350 . I almost always go for the under dog . Your test is bull shit , not a clear winner, cubes must be as close as possible. Your test a 427 compared to a 302 is 105 cubes is a bull shit comparison means nothing . Get real .
@starfished15 жыл бұрын
Both engines are amazing in there own ways .. Can’t go wrong with either one ! Pick your poison ☠️
@alexgrotefendt32365 жыл бұрын
Kinda funny how they used an engine with 100 more ci and a bigger pro charger kind of unfair if you ask me
@nathan22outdoors85 жыл бұрын
Kinda funny how its has an old design and only 2 valves per cylinder and still won. Kinda funny how even if the coyote had the bigger procharger it still wouldve blew at 1300hp.
@HioSSilver19995 жыл бұрын
Why would you ever run the same size blower on a better flowing engine? Gmc knew back in the 1930s you don't run the same size blower on all engines.
@bobloblaw74655 жыл бұрын
You failed to understand the rules and premise of this video
@joshheinz53285 жыл бұрын
Same budget, same target customers. The engines stock have more than a liter difference between them; pushrod engines have higher displacement for the same power. But that only matters when entering certain racing classes. For real world, real life use, a lighter engine, with smaller external dimensions, with a lower weight/lower CoG is preferable. On that note, kinda funny how they used an engine with 4 times the camshafts, and much larger physical dimensions.
@joshbrown8115 жыл бұрын
So? they compete directly with each other and they had the same budget for the comparison. The 5.0 also has to rev higher, more complicated, and is physically larger.