LS1 VN Commodore gets a built transmission

[@robertlambert4712]

Congrats on 12 months of weekly vids, something to look forward to on a Wednesday

[@MindieJ]

Appreciate it Rob thanks 😀

[@jakej7493]

“Should not be pulling that back off again” famous last words 😂

[@MindieJ]

Like saying “just 1 more lap” at the track, never ends well

[@ls1hinchy546]

She's coming back to life now m8 cant wait to see the installation video

[@MindieJ]

you and me both, getting there slowly

[@ziggassedup]

The broken bit is a sprag clutch...Here's a tip for the speedo gear...What ratio did a manual VN have(1:1 4th gear) and what rolling diameter are the tyres you'll be running...9/10 guys don't even worry about the top bolt...350's came on the back of 350 HQ's...253 & 308 had Trimattic...Is the Y pipe good.?..I could use a better one than I have...Did you know that VN's came out with a tow package and that included an external trans oil cooler and factory brackets to mount the cooler correctly...2 reasons you need good cooling..1 is that the converter slip will create heat and 2 you'll be on it a fair bit and that will create a lot more heat and trannys don't like heat...Keep havin' fun mate.

[@ziggassedup]

@@anthonywhelan8373 Yes they had a turbo pattern but I'm pretty sure all Holden engine cars had a Trimattic until VN then went to 700r..That's easy to check...Google a trans for a HG-VK 308..

[@nooffence7670]

In a statsman and premier turbo blocks any 308 got turbo 400 and 10bolt rear in a commodore they changed to turbo 350 400 when I don't know .all vn vp where turbo 700 I know turbo blocks did not start to hq and weren't as common as you think

[@fetusmccarlane9627]

Sweet! Yeah a break down video of your 12 months would definitely be interesting to see

[@MindieJ]

It’s nothing impressive that’s for sure haha

[@robertdinamo9931]

Love the progress on the build mate can't wait to see it driving agian

[@MindieJ]

You and me both haha

[@chromo4388]

genuinely look forward to your videos. cant wait for the next!

[@MindieJ]

Good to hear man I appreciate it, 😀

[@mitchell5372]

always brightens up my wednesdays

[@peterdunwoodie8878]

Lining up the torque converter and flex plate, my old man said "none of the above" lol

[@jasoncanvert1344]

Can't wait to see it all back together mate. I think at this point before the tune, if you can get a cheap LS6 manifold you might as well. Seen 10 to 15 rwhp gains.

[@MindieJ]

turns out it already has one on it haha

[@joshuamulder5439]

Yeah I'd love to see some content on the silver VN with the welds.

[@TechReviews2010]

Same mate and what size are they? thinking of running some on my VY SS .Cheers

[@tonxbezzina7015]

Good job, the more you pull of the car the more things you are painting and fixing.👍

[@MindieJ]

Haha that it correct

[@itsoklittlebuddy6033]

thanks for the update been looking forward to this

[@MindieJ]

Glad you enjoyed little buddy

[@mrg1875]

Awesome video as always. Love your content.

[@MindieJ]

Thanks man glad you enjoyed 😀

[@summersskids5428]

In my experience i have only seen around a 10hp at the wheels increaseis fitting an ls6 intake over the earlier ls1 intake from vt II, series 1 WH. But to be fair there were minor tune changes in both the instances i have been part of so hard tp say what actually made the difference. Research your numbers cast into the manifold pretty well most vx upwards in australia had the ls6 intake already

[@stuey7777]

Have a read of project VF. They ran a heap of tests on Manifolds, Intakes, exhausts etc all with baseline dyno & track numbers before and after. Very interesting reading! Theres also a second part called "Project VF2" Basically stock manifold and TB was the go, along with 1 3/4 headers rather than 1 7/8th. I believe their shop built the fastest NA LS powered commodore ever pulling 9's with simple bolt ons.

[@ryanhooper430]

Great content once again mate, loved the silver one also….keep it comin

[@MindieJ]

thanks Ryan appreciate the support

[@razor2260]

Yewww what a video, great stuff man 💯

[@MindieJ]

Thanks Pal

[@thewraith6360]

I know on LS1tech they used to have a back to back test and the LS6 manifold is good for about 20-30 wheel iirc, theres also the dorman intake that's even better than the factory LS6.

[@MindieJ]

turns out it already has one on it

[@codeyjames7208]

If it has 241 heads it most likely has the ls6 manifold already, best factory manifold to get is a four bolt Cath port found on the vz hsv/ve series one hsv then you need to buy a four bolt cable throttle

[@MindieJ]

correct, ran the part number and it already has one

[@deanrobinson896]

I've done a few LS conversions and I would highly recommend a Toyota Landcruiser 80 series transmission cooler, they are massive, much bigger than all the aftermarket ones and pretty cheap. +1 for having it on the side and filling from the bottom.

[@Tuffst]

Best part of Wednesday afternoons 👌🏼

[@MindieJ]

thanks Harry glad you enjoy the videos

[@Brendan.Wheatley]

Another entertaining episode from you mate, keep it up! How's the merch coming along? I'm enjoying the comments about the TH350 choice over the 4L60, quite entertaining!

[@MindieJ]

merch is a long exhausting process but definitely in the works

[@bhermon265]

Thanks for another great video 👍

[@MindieJ]

Glad you enjoyed mate 🤙🏼

[@CamLamo8448]

Looked like the perfect day to do some painting no wind at all 😂

[@MindieJ]

Felt like a Typhoon in person

[@snrautoworx2840]

Hell Yeah VN Update 😍😍

[@jonathanrees3765]

As I understand it all the later model LS1s in Oz had the LS6 intake. Think only early VT LS1s had LS1 intake. My VY LS1 has Part Number 12573572, which is same as LS6 Z06 at least. USA forums reckon on about 20HP upgrade from LS1 to LS6

[@MindieJ]

yeh upon running the part number into google it turns out it already has an LS6 style manifold

[@thatsimracer666]

the starter motor is one I package at work

[@Alex-mk7hq]

wicked content bud. did you apply some sealant to those flex plate bolts?? pretty common for them to leak and be mistaken for a bad rear main.

[@MindieJ]

correct and yes

[@MADED6]

Great progress, keep it up.

[@JFWGarage]

Congrats bro 🍻

[@MindieJ]

Thanks Jordan

[@fenixbeast5780]

I stopped working on my car to watch you work on your car😂 and where the merch at I need a new hoodie

[@tractorguy1994]

This will be amazing!

[@MindieJ]

I hope so haha 😀

[@alext8480]

What engine does Ur mate have in his VN?

[@kyegibson1120]

Hey mate just curious as to what you use to record these videos ? Cheers bro ps love the vn progress

[@MindieJ]

Currently using a Hero 7, definitely need an upgrade soon

[@LS8585]

Awesome!! Coming together nicely. Who built the auto if you don't mind me asking?

[@MindieJ]

Auto Trade Transmissions in Hoppers Crossing 😀

[@GOOD-jw8ry]

Good videos

[@MindieJ]

Thanks mate 😀

[@nickliparota]

Yes mate

[@MindieJ]

yeeeeeeeeeeees mate!

[@zacklofy6803]

Hey mate what’s the pan you used for the th350

[@MindieJ]

NOT SURE ON BRAND SORRY THE PLACE THAT BUILD THE TRANS ORDERED IT FOR ME

[@charlesgalea69]

Thanks for the video

[@MindieJ]

Thanks Charles glad you enjoyed mate 😁

[@Fluroh_]

Love ur vids man

[@MindieJ]

Thanks mate 😀

[@dalewebb9167]

Hey mate what is the name of the panel shop you get your work done? I'm in proof building a vn tubs and cage is a couple of weeks off being finished and will be ready for panel and paint... would like to speak to them..thanks

[@MindieJ]

Mini’s Paint And Panels, ask for Anthony if you drop in, say I sent you 😀

[@dalewebb9167]

@@MindieJ will do thanks mate

[@MindieJ]

Did you call? I overheard a quote about a VN with a cage

[@dalewebb9167]

@@MindieJ yea mate gave him a call im going to swing by once cage is finished

[@dalewebb9167]

Seems fairly priced and I trust they do good work as your pretty picky on things

[@SHOCKcustoms]

Who did u get to build your box? Am needing a tough t400 but havent had much luck finding a reliable builder

[@MindieJ]

Auto Trade Transmissions in Hoppers Crossing, have had a box done by Paul Rogers also but very $$

[@MindieJ]

@@anthonywhelan8373 well yeh any trans place would get you a matching converter if you order everything from them.

[@MindieJ]

@@anthonywhelan8373 i know I’ve used him before as I said

[@mynameis63]

Trying to understand why you didn't just get the 4L60 rebuilt? I'm in Alberta canada..I run an NA 6.1 litre making well over 500 with a yank 3400 convertor and a built L60. For 2 grand Black X Racing built my tranny to withstand 700 lbs/ft...600 plus HP. The L60 has the lowest 1st gear available, and allows 120 KPH cruising at 2100 RPM with 3:73 rear gear.

[@mynameis63]

Just finished scrolling the comments..found your reply to my question. It's true..an L60 can be a weak link if not properly built..maybe in your part of the world it's cost prohibitive..which truly sucks if it's the case...thankfully for me as an Albertan...a built L60 is the way to go.

[@lsgemini7686]

Very interested to see what rpm you cross the line at on the 1/4 with the 3.9s

[@MindieJ]

Hopefully it doesn’t run of legs before the line haha

[@giovanniaraco1496]

Where did you get the shifter from I am after the same thing for my vl I want the lock out centred so I don’t have to cut the trim

[@MindieJ]

It’s just a B&M Stealth Pro, can buy from any performance parts place

[@5starcrest]

missing the ceffy 💔

[@MindieJ]

Me too haven’t seen it in about 12 months

[@tcandoo1506]

Bro where is the merch! 🤷🏾‍♂️

[@MindieJ]

it will come at some point :)

[@messiahmoin8257]

The boys are on

[@jameshohmann535]

Yo mindiej did you spray under the vehicle ? With what product.

[@MindieJ]

I did, product is called Body Worx by GPI “stone guard”

[@Ricky-nq7lu]

Mate can I ask why you went with the th350 instead of the 4L60E or 6l80E as my 4L60E was rebuilt with a few extra's to make her stronger 3 year's ago now and that takes 500rwhp & 527 TQ. That what my 5.8L LS1 yes it has oversized pistons is why it's 5.8L in my VX Calais was dyno at just over a year ago now with around 55 1/4 mile passes on her. A retired transmission builder built it for me back then and he's going to freshen it for me at the end of the year if covid pisses off here in NZ. Only asking as keen to know if there's any benefit's.

[@MindieJ]

Because I trust a 350 a shitload more over a 4L60

[@Ricky-nq7lu]

@@MindieJ Oh Ok I coffed up for a blanket an the case is some American company who makes them for the GTO.

[@jamescarvill9366]

Where did you get your gearbox rebuilt????

[@MindieJ]

At Auto Trade Transmissions in Hoppers Crossing

[@Studat]

hey mate, How is the best place in Melbourne to go for transmission works? I know you mentioned it in a video but can't remember

[@MindieJ]

Preston Automatics

[@Studat]

@@MindieJ thank you bro 🙏🏻

[@pauljohns8215]

Good video

[@MindieJ]

Thanks Paul

[@danielsulics711]

Your mates VN looks tuff as. What rwkw does she pull?

[@MindieJ]

Not much at all actually

[@gardz3256]

Were they safety Crocs?

[@MindieJ]

Yes they are pass OH&S with flying colours

[@andreasntotas1800]

What size converter is it

[@MindieJ]

3500

[@Tommo1976]

Always wondered how you came up with yr channel name?

[@MindieJ]

Was my sisters account

[@Tommo1976]

👍

[@coopermckinnon8421]

Song at 5:40 anyone?

[@MindieJ]

Mark Robson- Daffodils ft Kevin Parker

[@jameshohmann535]

How much would you pay for a stock t350 ?

[@MindieJ]

Should be able to get one for around the $500 mark

[@leeperkins84]

Yes LS6 makes just enough difference, stock LS1 auto, new injectors and O rings etc I picked up about 8kw. I have one for sale in Ballarat

[@adamsquires2]

Is your motor stock or what would help

[@leeperkins84]

@@adamsquires2 yes, motor is still stock, rolled 199 rwkw at dyno, base mafless tune. 2,000 ks later we changed to LS6 intake and new injectors, rolled 207 rwkw on same tune. Final result was 220 rwkw, mafless tune etc

[@nicholassharp622]

Vn don’t have cable drive speedo it’s all electric

[@MindieJ]

Correct but you still need to drive there for the electronic conversion sensor the screw onto

[@james22939]

Great way too spend my Wednesday

[@MindieJ]

And here I am watching “The Voice” hahaha

[@james22939]

@@MindieJ funny

[@lachlanwoods3940]

I had great respect for you till I heard that!! 😂😂😂

[@MindieJ]

@@lachlanwoods3940 ya get that sometimes 😂

[@lachlanwoods3940]

@@MindieJ Bro, the Voice though, I can’t talk too much, sitting with the missus watching old X-Files episodes! 🙄😂😂

[@holdenrocks]

Hi if you want a tuff mount for your t350 … I got one for sale as im locally in west suburb of Melbourne … let me know cheers

[@MindieJ]

Already has a mount on it as shown in the vid but thanks anyways man

[@CamLamo8448]

Saas do a gps speedo converter for these adoptions im pretty sure for like 2 hundred

[@kingkaiser7732]

How do you “send” a flex plate. 🤦‍♂️

[@MindieJ]

With a courier in most cases 🤷🏼‍♂️

[@robbo8566]

Do 2 videos a week now 🤣🤣🤣

[@MindieJ]

Hard enough getting 1 out every week

[@robbo8566]

@@MindieJ hahaha fair enough

[@Deadbones187]

Booom first on

[@MindieJ]

Boom!

[@Fluroh_]

First

[@MindieJ]

Gold star for you ⭐️