4:08 and here we are 3 years later and you never figured it out
@viktor74953 жыл бұрын
Is that true
@Cambone133 жыл бұрын
@@viktor7495 Well now its 4 years!
@Rotttman7 жыл бұрын
No episode 2? I have a feeling you start alot of projects but never finish any of them. lol. Im not hating.
@FordZda8 жыл бұрын
These are the videos we want! Not unboxings and product testing, the XLT, the rev700 and the monster elan were the best!
@PowerModzOfficial8 жыл бұрын
+Zac Wadholm Hey thanks for watching, I try to do everything, there are a lot of people who want the product vids and new stuff, and the ricky bobby louie, and the jet engine, and the ford, and the camp, and the property.....lots to do!!
@FordZda8 жыл бұрын
I was a bit harsh on my criticism i'm sure quite a few people enjoy the product reviews but there so frequent that i'd like to see the enticer! I have a few projects of my own and don't get me wrong i'm on the edge of too many i'm headed out to Waconia (If you've never been go next year an absolute blast) in 2 weeks from now and a buddy an I spent the last month preparing our sleds I got my 76 jag3000 340 (F/A) completely ready and at the begining of December we brought back to life a 97 indy 500 (Totally stuck bearings and now it runs like a champ!) I have an 1980 arctic cat kitty cat with a seat that I need to reupholster and i gotta check the bearings on my trailer. either way love the videos keep on riding and doing these awesome builds!
@dwadholm18 жыл бұрын
+PowerModz There is no doubt though that what made your channel popular is the sled builds. Nothing wrong with branching out but don't forget about your bread and butter...I know there is some final Elan Restoration video just begging to be edited.
@triple4sss8 жыл бұрын
One thing i found with older sleds is the crank seals are usually bad. Once the engine is hot they'll loose power and bog until it gets into a higher rpm range. Spark plug color will reflect this.
@Joe-wy2bn Жыл бұрын
Sounds like what mine is doing
@cubbeezx8 жыл бұрын
Great video Louis! That's going to be a great family sled once you get it all tuned up.
@DoubleOJoe8 жыл бұрын
great video as always !!!! but hopefully it snow soon i wanna see some riding videos !!!
@bobknoxious59495 жыл бұрын
Dude I had a boggy Yamaha Phazer 2..... had a mechanic spend over 12 hours on it .good thing he's a friend of mine pay them in beer and beef. I finally I thought to myself it's getting too much oil in the combustion chamber cut the oil injection system out mix the gas the thing runs like Jack the Bear now spectacular!
@stevenvanheel39328 жыл бұрын
This is the kind of guy I would like to buy my used sleds from except for how he removes the oil injection.
@Kenjh718 жыл бұрын
This is the kind of stuff I like. What is the orange suspension on the table?
@tylerbeckius64117 жыл бұрын
My 1998 Polaris 440 Indy will not move and will not go past 4.5 rpms can any one help and tell me when it doing
@hearyr5 жыл бұрын
I had serious bogging and seemed like a lack of fuel. Cleaned carbs etc. It turns out it was just the fuel pick up line inside the tank. It totally rotted and finally fell off! Replaced and my 2000 500 classic indy runs like a dream
@emf22118 жыл бұрын
120 psi is perfect
@jorgensonracing83494 жыл бұрын
My psi is 75 on my 340 and it still runs
@frontball27548 жыл бұрын
Little bit cold in there? I thought I saw your breath at one point. Really appreciate the info.
@shawncordeiro11505 жыл бұрын
120 psi is fine sleds looks good condition save your money and ride it remember its only got 35 hp
@RatSleds5 жыл бұрын
yeah bad crank seals loose head bolts dirty carbs Bad rings loose fuel lines even bad intakle gaskets. ... But bottom line the old girl is still runnin! ! leave it alone luey leave it alone! and Drive the PISS outta it ha! :) great vid
@nybergarms84045 жыл бұрын
hah. my uncle hired me to fix that exact snowmobile when he heard that I fixed my '71 ski whiz and '69 ski daddler.
@sloppysecondsracing8 жыл бұрын
Your compression is fine as Long as it's over 110 and withIn a couple of psi of each other .Could be your floats aren't set up right or sticking. To much fuel or not enough causing the bog.
@marcharris27344 жыл бұрын
Oil pumps are very robust. Rarely do they fail. The oil lines fall apart before the pump fails. Having to premix sucks.
@hi.36548 жыл бұрын
You guys have a lot of sleds that's awesome I love sleds and had and still have a Indy lite 340 but no motor they r fun!
@Silverwing-ml8cd5 жыл бұрын
i have this exact problem with my skidoo summit 800 07 it runs fine for about a minute then it starts bogging hard
@silverpirate6678 жыл бұрын
Also check your kill switch , if its boggy and back firing it could be that , Easy way to check is pull the black single wire from the coil and see if it runs better if so the switch is bad or your throttle cables are not adjusted correctly .
@ArcticJeff8 жыл бұрын
Its funny how folks will chase bogging issues with clutching, when 9 times out of 10 is jetting.
@joelrides90768 жыл бұрын
Nine Polaris Indy light 340
@nikdag6915 жыл бұрын
I just got a 1995 phazer II and it tops out at 55mph and wont go past 5000 rpm and takes off slow could someone help me?
@redneckriders24868 жыл бұрын
hey louie had a 340 same motor just 2008 i noticed the clutch spring would sometimes get hung up but not really bad just needs anew spring and the bogey wheels will break off so make sure you do bearings but all around that sled is boggey and slow off the start but once it gets up to speed there fun keep making the vids thanks
@nolanbsink74644 жыл бұрын
It seems like 1 minute its running great and then the next it just bogs down! I’ve clean the carbs 4 times. The only way it’d run better was when I replaced the spark plugs. Even then it would need new plugs every 30 minutes and it just became expensive. I changed the spark plug coil and gaskets. It has amazing compression but it just bogs down! It’ll just shut off after a little bit by itself. I don’t know what the issue is.
@mitchcoop12 жыл бұрын
Yup ...do top end? ..Get the "Might as wells" and pull it & do crank seals. < Then can check bottom end too.
@donaldsaunders30594 жыл бұрын
Great video thanks a lot if you want snow come to Newfoundland all the best 👍
@EJSKATE17 жыл бұрын
Wish I had seen this video sooner! I've fittled with my fuel to air... to try and help the issue then next weekend found out my clutch was stuck shut.. took it apart cleaned it and I'm installing it tomorrow ... then i'm sure I will have to re adjust the air/fuel
@quincee33764 жыл бұрын
Great sleds . Great engines .
@jacobfraser79676 жыл бұрын
if you put a little oil in the cylinder and your compression jumps way up, its a sign of worn rings/cylinder as well
@mikegarster54795 жыл бұрын
Your videos are awesome.i sat an watched a lot of your videos.very informal
@connorgibbs92956 жыл бұрын
I have a 1997 polaris 600 xc triple that wont run right when it gets warmed up i go to hammer it and it bogs i went through the drive line and everything is moving properly and nothing is seized up so i went to the carbs and took them off cleaned them all and put them back together and i cant get the bowls to fill with fuel and it wont get any gas to start at all but when i take the fuel lines off that go to the carb gas comes pouring out so if gas is getting to the carb but wont fill the carb with gas do you know what my issue could be?
@scottcarruthers92045 жыл бұрын
Floats are stuck in the bowls in the full position. They need to be cleaned.
@derekschroeder23915 жыл бұрын
Or a new fuel pump
@brycemaier35705 жыл бұрын
I have a 1989 Polaris Indy sport 340
@kemmyboi89674 жыл бұрын
Sooo sell my sled?
@jamiedobie70668 жыл бұрын
When will we see more on the series?
@ildkild8 жыл бұрын
compression is mesured with throtle open.
@georgescofield68342 жыл бұрын
I’ve got the same sled in a 94. I subscribed. These are the vids I’ve been searching for! Thank You!
@PowerModzOfficial2 жыл бұрын
Thanks for the sub!
@bitinggoat28916 жыл бұрын
First time snowmobile owner. I was given a 1989 Polaris Indy Trail Deluxe and need to clean and tune it up. Can you recommend somewhere to get a repair manual?
@caleb-25364 жыл бұрын
Biting Goat still needs work??
@daveking42465 жыл бұрын
Anybody have an idea where I should start... picked up an old Yamaha....starts first pull, idles nice boggy when throttling up and smokes like crazy..fills the barn in seconds seems ...I was told speed only hitting like 50mph...I do notice it has aftermarket pipe
@thatbigblock70075 жыл бұрын
Dave King don’t know a lot but if it has twin pipes it could be that the guy didn’t rejet the sled after putting on the pipes look at what the pipes are called and find the jetting and what it should be also check, spark plugs compression, clean clutches anything like that etc
@sebastianklapprat99645 жыл бұрын
Dave King carb clean
@sebastianklapprat99645 жыл бұрын
Dave King carb clean should be the main problem
@zerskier8 жыл бұрын
my money's on crankshaft seals.
@Fixin2Ride-Official-3 жыл бұрын
Seems like yku did everythimg except Ohm the stator out? Ive replied in this before. We wannaaaaa seeee aaaan uuuuupdaaaaate!!! Lol.
@TeddyD8026 жыл бұрын
I have a 4 strike Cat T660, just replaced drive shaft bearings , it works ok but has a bad backfire when cutting off the throttle, diagnostic mode reports no problem. Magnetic speedo doesn’t work, but it is sending signal to ECU but gage says 0. Replaced spark plugs , not sure what to check next , the sled won’t go over 30 mph, just gets to max Rev and stays there work accelerate anymore than that
@MBTUE8 жыл бұрын
Great to see you back working on the old sleds ! I Bought a 94 Indy Lite this summer. I went over most of it , using a lot of your videos as a guide. It's running great now.I can't wait to see this series. Mark
@slednecker878 жыл бұрын
finally a older sled and a polaris, i like the older sleds
@HorsepowerGarageVideos8 жыл бұрын
It's extremely rare for oil injection to fail on a Polaris, I would never remove it because the crank bearings have oil lines ran directly to them.
@sledrideing1148 жыл бұрын
My sled, 2006? Not too sure but it's s Polaris Rmk trail 550, it a push button reverse when you reverse its suppose to almost shut off like and come back on into reverse, but sometimes it just shuts off. Any idea what the problem may be?
@rodsvintagesxschannel.30956 жыл бұрын
Crank seals could be weak.
@geraldgerthofer3603 Жыл бұрын
Sounds like a weak coil,,,,,
@robhunter22795 жыл бұрын
Hey Louis I have a problem with one carb on an old 93 488 Polaris. The right side spits fuel out the opening and bogs like a sob. Cleaned the carbs, checked the fuel pump every thing looks good so far. Ya open it up n it goes but at idle not so good. Plug is wet every time I pull the one other is dry but not starving. Choke plungers worn out or not set right? I also found that the pump pulse hose is loose even with the clamp on both ends which I am going to change right away. Any ideas? Still dirty maybe?
@PowerModzOfficial5 жыл бұрын
I bet there is a hole in the piston....put your finger over the spark plug hole
@robhunter22795 жыл бұрын
@@PowerModzOfficial thanks for the quick reply buddy, love the channel btw 👍I just found my compression tester gonna check the numbers in a bit. That was my next guess compression lol ..we checked with out the tester and there was some not sure how much tho. Let ya know what I find thanks again!!
@robhunter22795 жыл бұрын
@@PowerModzOfficial turns out the top of the piston bad side is covered in thick carbon flashed a light in the plug hole. . Better side has about 109 and the one not firing properly has about 96/97lbs. Could the rings be gummed up n stuck? Possibly just worn out but either way I gotta pull it apart. Piston also looked decent thru carb opening
@PeekMorose2 жыл бұрын
I have a edge touring 550 Polaris 2004 Am only 16 but i keep having these back fires as soon as it goes forward. And sometimes it has a chance of going into reverse automatically after it back fires also it feels kinda boggy
@thumperbangin20002 жыл бұрын
I bought a 99 340 touring indy i have been fixing up. Skidplate, protaper bars/riser, new skis, fun sled.
@danstaszko69302 жыл бұрын
I have a 99 Polaris 600 xc sp and a 01 Polaris 800 xc sp. Should I remove the oil pump and mix gas instead of using the pump
@fabianbird4584 Жыл бұрын
I just bought my son 96 Polaris indy 500 from fb it's alright until warms up then it loses power your videos are very helpful thanx a lot you just save me a lot money from going into the shop
@billsmith16478 жыл бұрын
My 95 Indy Sport Touring is waiting for the next episode.
@caleb-25364 жыл бұрын
Bill Smith still waiting?!?
@TheSomewhere688 жыл бұрын
my kid has 1990 340 Indy asport... runs if u don't put weight on it.. I'm put top end in too.. compression was 118. 119.. fun little sleds.. I rode this one three years ago when I wrecked my xc700..
@fabianbird4584 Жыл бұрын
Woo hoo Ontario sled!
@StreetersGarage8 жыл бұрын
Picked up a 1996 Indy lite for my daughter. We've been slowly rebuilding it and going through much of maintenance you've already mentioned.
@bradcummings25768 жыл бұрын
i have a 1995 polaris indy sport 440 and the suspension has that same crack how could i fix that with out replacing the entire suspension.? and all my lights are dim. would a bad regulator cause that problem if not you know what would?
@waults8 жыл бұрын
I've been looking for one of these with a blown motor for my version of a timber sled. Indy Lite 340 chassis, '93 or newer with the chain case. Run a touring sled rear skid with a 136x 1" track. Power it with the Polaris Fuji 550 fan, preferably one new enough ('04 or so?) to have electronic reverse. I want a low slung seat for one knee or stand up riding, but need storage under the seat for a case of beer. Drop the gearing so max speed comes out around 60, reinforce the tunnel a bit for a heavy duty hitch and a rack.....
@bryceclement28038 жыл бұрын
Least possible option, all though possible: My sled(1999 summit 600) was going thought plugs once or twice a week, and boggying when you pin it, bogging in snow etc, Turns out my spark plug boot was eroded, placed a new one on and it ran like new!
@RWoods-qv9rw8 жыл бұрын
Many Times Mr. Mouse Makes his off season home in your Exhaust pipe rather than in the airbox, This restriction along with many years of accumulated unburnt oil and carbon can lead to poor performance and overheating exhaust. If I suspect this is the case, I remove the exhaust, build a fire big enough to swallow the whole Pipe & can, put them in and roast overnight, I let the fire go out and pipe cool then I blow it out with compressed air. the heat usually loosens up or eliminates most of the rust so a quick wire brushing and some bar-b-que black high temp paint finish the servicing.
@weaselboy13152 жыл бұрын
Like that dolly.
@josephyoung76358 жыл бұрын
I have a 2010 rmk 800 ran fine then died and idles rough and would die. then I started it and quikly put it in reverse and ran fine for a while. then started it the next day ran for 30 seconds then died. now it runs like crap and wont idle vary long. when I rev it up it has a really rough sound not the usual braap u would expect. motor was just rebuilt so there's no issue there. what could the problem be?
@brettpaulson66228 жыл бұрын
I was wondering PowerModz do u think my 2010 ski-doo renegade 550f 2 in paddle track I put on! Do u think it will be good in the mountains? Thanks!
@dustinkennedy1308 жыл бұрын
I have a 2006 Polaris RMK 900 and I was wondering if I can put a new were hood on it are just a different one from the stock one
@curiouschaos21388 жыл бұрын
+PowerModz Hey there Louis just wondering how often you will be posting this series because i feel this could help me with my sled (1993 Polaris indy 500 efi (so no carbs) sks) really nice sled! I had to rebuild the motor (both top and bottom ends) and is just slowly being broken in right now but i still fell that it is a little bit boggy. We do have extra oil in the gas as an extra lubricant while its being broken in and it has a new primary clutch as well but i still think it could perform better than what it is, so i want to take a look at your videos here and see what could possibly be wrong. Anything you suggest???
@ehguy36287 жыл бұрын
When, oh When will we see another installment of the Boggy Snowmobile Problems and fixes Ep #XX series?. I have a 1994 Indy Lite and am looking forward to some more information and insights along with all the show and tell of the maintenance. OR maybe you sold it due to the unforeseen broken idler wheel mount?
@carterstirrett13836 жыл бұрын
just picked up a Ski doo everest 340 was seized paid 40$, got it home sprayed down the cylinders with wd40 freed it up runs now but dies after a free seconds of idling thinkng carb needs cleaning or crank seals we'll see hope these give me some ideas on what it could be
@jufejulian19028 жыл бұрын
I am think about putting protaper crf 50 bars on my enticer 2 1994 410 LTE what do u think
@Gearheadtom8 жыл бұрын
A fresh bore with new pistons defiantly won't hurt it any. I wouldn't bypass the oil injection, just make sure it's adjusted right, those old Polaris seem to get a little extra slobbery with their oil when they get a bunch of miles on them. Gotta remember it is only a piston port 340 after all haha
@aaronbates5007 жыл бұрын
You should let the sled idle down before shutting it off.. especially if it has reed valves. What happens is you cut the spark and it keeps sucking gas in and it burns the tips of the reed valves. Just a tip.
@PowerModzOfficial7 жыл бұрын
ive never seen a set of burnt tip reeds - but ill keep an eye out for them thanks!
@aaronbates5007 жыл бұрын
+PowerModz yeah.. I haven't either, but i know if you shut the engine off at a high idle, it cuts the spark but keeps sucking gas in and it ignites the fuel because of the head in the cylinder and it burns off the tip of the exhaust reed valve (if it even has reed valves) just a thing I've heard...
@SkankRemix37 жыл бұрын
What is the difference of spark fired combustion, or hot spot fired combustion occuring? Would normal combustion not also burn the tips off as you say?
@aaronbates5007 жыл бұрын
+8v-of-fury what I'm saying is the piston is sucking in gas and isn't firing on every stroke as it would with a spark so the gas is going to build up and you'll have one big explosion. That's where backfiring comes from that you hear when you shut the thing off.
@SkankRemix37 жыл бұрын
Aaron Bates most of it should be forced out the exhaust i would think. however i suppose with less rpm it may not have the velocity.
@HarryHCowanJR7 жыл бұрын
Just got 1994 Polaris 500 indie electronic fuel injected idles fine soon as I get on it it bogs out literally drives about 10 feet and bogs out what could it be
@TWLML4204 жыл бұрын
my old lady's sled is a 96 touring E 380 fan and that little bastard is a blast to ride
@MZMotor958 жыл бұрын
My 2013 Pro RMK has 120 PSI on both cylinders, and that is perfectly fine according to Polaris mechanics, so why is 120 PSI low on this old 340?
@dwadholm18 жыл бұрын
+MarcusN It's not. 120 is just fine...
@TheBCSledder8 жыл бұрын
Never heard anyone say 120 is low in a sled. Seeing as he is used to Skidoo he might be used to higher numbers.
@masondick48518 жыл бұрын
MarcusN depends on your elevation but usually polaris's specs are closer to 130, but some different models run 140 or 150 from stock. But the biggest thing you want to look for is that they're close to spec and close to the same on both sides.
@MZMotor958 жыл бұрын
from what I read and heard from Polaris mechanics the CFI engine does not have much more than 125psi stock and of course you will get the drop after som mileage. My Pro RMK had 1900 km with 120 PSI. At 2500 km it had closer to 115. same numbers on both cylinders. Changed to Wossner pistons and bam, 140 psi +. Smoother idle and better response imo.
@masondick48518 жыл бұрын
My '10 600 cfi and '14 800 cfi are both 130 on the nose. Also my bud is a red seal power sports mechanic with Polaris gold training. 130 is spec
@brianbenz36132 жыл бұрын
If it was stored in a outside building there could be a mouse nest in the exhaust system plugging it up
@Doonit_hard_way_since_653 жыл бұрын
never did a wet compression test? that should have been right after dry test. 120 dry is the lower end of acceptable by the OEM specifications. Past that you were wasting your time. No pointing out plug colour? that is first hint on where your jetting is at. Has the oil injector lever been re-zeroed? The single biggest thing I have seen in 2-smokers that have sat around too long is something you failed to mention completely, sticky or stuck-open reeds. Usually some mongrel decided to go the premix route, the reeds get a little sticky from low $ oil, and are either slow, sticky and not opening, or not closing tight from that goopy 75cent/qt walmart TC-W3 oil. reeds can cause funky compression readings, really funky readings.
@PowerModzOfficial3 жыл бұрын
No reeds in that one. I premix most of my older sleds - best thing I ever did!
@Doonit_hard_way_since_653 жыл бұрын
@@PowerModzOfficial That, my friend, is a very smart move. oil injector pumps failing have to be the single biggest causes of fatal engine fails in these older sleds. Oil has come a long way, and a 25 year old injector pump hasn't gotten better with age.
@Doonit_hard_way_since_653 жыл бұрын
@@PowerModzOfficial Have to laugh, I use the same Northern Tool parts washer as a tear down table. They were piston-ported? I am surprised, See, learn something every day, even without trying.
@greenslider63517 жыл бұрын
mine was boggy because of the gas actually I cleaned the carbs & jets. But there was water in the gas and it bogged it down
@silohop8 жыл бұрын
I apologize, this vid is friggin great. That ther polaris is a skookum choocher
@vfam58604 жыл бұрын
I like the video, lots of info. I've seen this too many times, poor running sled, same sound and boggy situation. With my limited budget I have to decide how much to put in a sled. The prices of older sleds have come down a bit the past few years. Now I'm less up for doing the work - prefer to find a low mileage sled and do some minor maintenance rather than replace a lot of things and spend money, makes resale value hard to recoup too. That's just me, limited funds and time to work on sleds. By default I look for low mileage sleds and will pass on anything that needs lots of work.
@sledrideing1148 жыл бұрын
My sled, 2006? Not too sure but it's s Polaris Rmk trail 550, it a push button reverse when you reverse its suppose to almost shut off like and come back on into reverse, but sometimes it just shuts off. Any idea what the problem may be?
@bigmacmik35348 жыл бұрын
Does it idle fine? Or wiring issue maybe
@tchriders84498 жыл бұрын
sledrideing114 that just happens sometimes it's no big deal
@sledrideing1148 жыл бұрын
TM Miner I increased the idle its mint now
@bigmacmik35348 жыл бұрын
perfect
@gabewilliams59935 жыл бұрын
sledrideing114 my 04 super sport has done that before. Might just need to give it minimal gas to keep it alive
@motopro44028 жыл бұрын
Where's the srv and I saw a Polaris pro s/x by the atv in the update here's my request you should do a vid on the pro and on your son's yamaha sno scoot
@vortexpb38088 жыл бұрын
where did you learn to like make repairs and learn how the snowmobiles work and things like that you know the engineering and stuff
@stevelafrance326 жыл бұрын
Oh yes the Polaris bog normally on a piston ported engine once it wears it does that boring it over fixed mine everytime
@joshuabailey28193 жыл бұрын
Quit talking to dam much. About nothing
@PowerModzOfficial3 жыл бұрын
Ya Im a talker, thanks for watching! It's funny, if I dont talk enough people get mad, if I talk too much people get mad....never seems to be a happy ground....
@zachhodg83144 жыл бұрын
Your supposed to hold the throttle open when doing compression check
@EricFB8 жыл бұрын
Louie you're a better mechanic than many of the licensed guys I know.
@NVMDSTEvil8 жыл бұрын
You left out cracks in boot between carb and engine. RTV silicone makes a decent temp fix, just coat it and its good.
@NVMDSTEvil8 жыл бұрын
Must have used bad stuff? I've used it on ditch banger sleds and it holds up fine for years for me.
@fishingautos85857 жыл бұрын
I think you should build a 97 mxz 583 monster.
@randymcbeth58973 жыл бұрын
1995 skidoo 500 sle lights and tach quit working
@PowerModzOfficial3 жыл бұрын
fuse or ground
@randymcbeth58973 жыл бұрын
@@PowerModzOfficial where do I find the fuse?
@GaryntaraBurbank7 жыл бұрын
clean the carbs new plugs new fuel filter And you should be good
@lucasechenique395 жыл бұрын
Guys, I have a problem with my 1999 Indy 500. I bought it a year ago garage kept all its life with 900 miles in beautiful condition and it ran fine. This year, I started it up again, put gas and oil in it, and it completely bogged out in the middle of a (frozen) lake. I got new spark plugs and spark plug caps on it, but later that month, it did that exact same thing in deep snow(it shouldn't because it's an RMK). A local expert told me nothing was wrong with it except the belt, so I got a better belt. Later, it did that exact same thing and another engine expert told me it was fuel and oil filters, so we changed that, took the water out of the carb, and cleaned out the airbox. It ran like new in 5° weather until a few days when it warmed up to 25° and it bogged out, lost power, and ran on 1 cylinder halfway down a packed down trail. I want to know what else could be wrong with it and what i could do. Please help I use that snowmobile everyday to go to school and work
@spike27942 жыл бұрын
Get a new snowmobile.
@rogerbeginify7 жыл бұрын
Have you ever had problems getting correct compression reading using the long flexible hose vs the short metal pipe on your compression gauge?
@greenslider63517 жыл бұрын
definitely a great sled they're pretty quick and light as hell for when u get stuck on the trails I have one rn I'm just waiting for snow. I'm actually going to try to swap a Indy 488 in it does anyone have any tips or something tht might help make things easier ?
@ildkild8 жыл бұрын
problem that i run into a lot is a clogged exhaust pipe, and ports (some think more oil is better) also poorly maintained crank seals can tear or pop out.
@gemsfromjesse3 жыл бұрын
What belt do you use on the 91 direct drive
@gab7157 Жыл бұрын
Once you know how to fix mechines your a mechanic.
@GaryntaraBurbank7 жыл бұрын
I had a Polaris Indy 440 and for a little sled it would run with the big boys
@Amanda-xr5gc5 жыл бұрын
Polaris indy 500 was running great then just lost power. Changed plugs and it fires right up drove for a few mins and died again. Now it wont start at all. Any suggestions?
@hearyr5 жыл бұрын
I just had that problem. Turns out it was in my fuel pick up line in the tank! It was totally rotted out, put a new piece in and voila.
@shperax4 жыл бұрын
Turns out everything was perfect. There was simply a mouse nest in the exhaust.