CAN AM OUTLANDER 1000 XMR DALTON CLUTCH KIT INSTALL Part 1 Primary

Installing a Dalton clutch kit is key when you buy a new ATV/UTV, I know sounds weird right....shouldn't they just be ready to ride? Yes they should but they aren't. In part ! I show you how to remove , install and replace the Primary clutch - Available at powermodz.com

[@georgeduckworth4452]

Nice stuff man Dalton is where it's at!

[@stacyreid5077]

I've got a 800XT Commander and had a STM clutch kit installed on it when I had my CATVOS lift put on. I had 29.5" OutLaws on it then I've went up to 32" Black Mambas now hoping that my clutching will be fine because it was extremely jerky when I put it in gear but it sure put all my power down on the ground and in the mud

[@rooseveltrainesjr7618]

I have a 21 xmr 1000 fairly new 6 months warranty has gone . Had some work done to it limp mode. Wire came loose from cylinder. An plug came loose I took it in the deep mud the other days an smell something burning on left side I'm sure it was the belt that mess coming off my beast soon. An replacing the whole thing

[@johnwilliam6638]

Been thinking of adding the dalton kit to my 2018 can am 850 xmr as well just wondering what kind of benefits I can expect to see from the upgrade, thanks again for posting these educational videos.

[@xmrmudninja1165]

I would not want your money I put one in and ended up putting a qsc rev x primary clutch in like to months later wish I would of just saved the 400 it cost for the dalton spring set that dose not do much but makes back shifting better in my opinion

[@evanlacquette7476]

Where was this video all my life lol. Thanks so much

[@keithpennings5946]

I have a 17 Outlander 1000 xmr same deal lost my belt in 500kms went to a maverick belt hope it lasts longer lol

[@cliffmcguinness9335]

Why do you put the floor board back on after taking it off to remove cover then start filling would be a better view without it if you didn't remove plastics and floorboard to get cover off I would love to see a video on that

[@sledderguy1871]

Lookin good

[@satanicelk709]

I have a 2019 Outlander 1000 xmr and it seems when I get in the mud and put it in reverse it just Immediately smokes the belt do you think this would stop that

[@PowerModzOfficial]

are you in low?

[@PowerModzOfficial]

if in low you need a clutch kit

[@satanicelk709]

Yes in low but if you try to switch to reverse it burns the belt

[@claudiohysi9203]

I have an outlander xtp 1000 and as soon as i reverse i can hear that belt and also a burn smell .The bike has 40 miles on it brand new .

[@Yippynutsmacker]

I put a dalton kit on my xmr 1000. Wasnt impressed. Didnt really do anything, the problem is the primary is not a good design. So I left the dalton secondary in and put an stm in the primary. Totally different machine after.

[@owenlueddeke5272]

hey i bought googles of you at the snowmobile show do you remember

[@PowerModzOfficial]

sweet thanks very much!!

[@bazookasblog]

you dont have to remove the foot well to pull the cover off?

[@joseparra5763]

My primary is stuck with the bold just half way on it desides to come Off but anyone know how to get it off because it’s just stuck

[@kingdomfirearms4320]

What is the torque pounds on it you didn't say

[@WolfinWolvesClothing713]

I cant find a puller for that style of clutch? primary

[@alexduca6514]

Hey is that an outlander xmr1000 max ?

[@blackgmc01]

Dalton made in Nova Scotia

[@catjackoff-road855]

john mason Truro N.S. 👍 hour and a half from my doorstep.

[@Rowdie999]

Whats the size of the lock nut? And its an allen key?

[@Ticdaniel]

I can se what it looks like.. but what is it ? Can-am? Never heard about that polaris model before 🤣🤣