More Boostier then ever

After installing the new Engine with Magnuson Supercharger I needed to make more changes to the shop truck.
Installing the Heat Exchanger , Coolent Pump and all the plumbing.
Then I installed the modified wheel wells filled the cooling system and test drive to the HRG Studio

[@markflaugh2293]

Didn’t think that the shop truck could get any cooler but you keep making it even cooler!

[@xozindustries7451]

Good idea with the wheel wells, I think I would put some rubber flaps on the openings just to keep crap out, that way you can always flip them up to show it off and maintain it

[@KYoss68]

Man, this thing has come a LONG way since you hauled the parts out of that guy's back yard. Nice work Lucky!

[@johnburch6927]

Incredible, the changes this old girl has seen. What a beaut!

[@riverrat8029]

Always enjoy your banter. It’s like you’re talking to yourself. I know it’s the only way to get an intelligent conversation! 👍 from the “Florida Keys” 😎🌴

[@brandonhewitt2386]

That thing sounds rowdy! Love that supercharger whine. You're living the dream! Awesome truck!💪

[@RexCars1]

Well Done...!! I would love to see this truck one the Dyno ( once it's all broke in ).. and see what it puts to the rear wheels :)

[@rockercover]

Looks impressive all around. The air-charger whine has a good sound level also. If you ever became annoyed with water, dirt, mud on under-hood items, could install quick snap removable rubberized, flexible slotted-flaps, on the wheel well skirting.

[@jw4620]

Sounds and looks great! If I'd spent that much money I'd want to show it off too.

[@cruztalamantez9136]

Excellent work, everything looking snazzy.

[@alansullivan5913]

Love the shop truck Lucky sounds good I love that whine

[@conleykennedy]

That truck must drive beautifully. Lots of money and time, great build.

[@widdeler1]

Awesome shop Daily 👌

[@hughcasement5443]

I love that truck! My first vehicle was a 67 c10/flintstones mobile. Nostalgia is off the charts.

[@competitionpatiocoversscre856]

Amazing for just a shop truck......Sweet ride

[@eddiepatterson5025]

I love the way you trimmed the inner fender wells for serviceability Lucky 🍀. AMD need to see these and start making them. I like these much better for accessibility to everything. If you ever want to temporarily close in those cut up some rubber covers that are easily to remove if so choose. By the way the supercharger sounds awesome 😎.

[@jeffkalte9371]

Lucky, this is such a great channel! Keep up the good work buddy!

[@chief3378]

I like the way you did the wheel wells

[@zachskinner8996]

Turbo was cool but hard to beat that supercharger whine. One of my favorite shop trucks ever. Even better to see it actually gets used and abused

[@cudaman-yq7pq]

For the wheel wells, you could cut some sheet rubber and attach it with some metal push fasteners like the factory did it on some cars. Or, go Hollywood and fabricate some custom covers with Dzus fasteners so that they can be removed or installed quickly. :)

[@bobbydsautorama2154]

You make it look so easy. Good job 👍

[@Pedroisanickname]

Lucky, you have a really nice truck there. Thanks to the teal bits, the orange is growing on me. Thanks for the update. Cheers!

[@396M21]

Looks and sounds great Lucky,you won't get any argument from me on the wheelwells....I left mine out so I can stand right in the engine bay for carb and dizzy playtime.

[@streetstock72]

Love the tip on the inner fender well, Thanks Lucky it was worth the t shirt bought!

[@johnfowler2644]

I’m 💯 doing that to my inner fenders, nice work!

[@alonzofloyd8140]

Nice Lucky, keep up the good work!!!

[@Twizm101]

Awesome truck Man!..keep up the good work..👍👌🤙

[@ezacher4634]

Very nice. Gauges are sweet.

[@frankm8533]

Man that sounds really nice 👌

[@daviddundas4140]

The Shop truck looks nice, but that red Camaro is beautiful

[@CCW1911]

Awesome I love that truck!

[@travelingtech3251]

Love this truck

[@wayneb7190]

Looking good Lucky, i see new tires in the near future for the shop truck.

[@Davefromwisconsin]

I had a power steering pressure hose start smoking because it was the only path to ground on an engine. Ground straps are very important.

[@MrJJRACING]

Let’s go Head to head! You ready?

[@TheCanadianBubba]

Inners look sweet ! My front sheet metal is all rotting at all those spots you took out anyways. Some strategically located speed holes back in the day would have been nice. Best of days to you and yours Lucky. Dope to tack that chunk back in as well.

[@glutten1386]

Love that shop truck!!!

[@bveezy5246]

Sounds fantastic!

[@mickteasdale3225]

That truck is MONEY 👌👌👌

[@geraldparker7008]

That's pretty good with the wheel well they where made tire and hard to put in and take out! That's a good idea on any older car with steel gender wells.

[@c103110a]

That's a really nice shop truck.

[@bobFLIPP]

Very nice! Very streetable daily driver.

[@iadc43]

19:31 hey Lucky, what about cutting the rear edge of the inner fender cutout to follow the header angle of the rear cylinder? I think it would look trick.

[@jimanderson4495]

Thanks. Love the channel

[@elarr8733]

Drag Week needs a shop truck class. Actual working shop trucks. No trailers allowed.

[@davehanson1417]

Big thumbs up on the supercharger. Nothing against turbo's but I just prefer a supercharger. Now if you would only swap to a 6 speed. :)

[@wackowacko8931]

Assuming it isn't just out of adjustment, you can move the pivot point on the gearshift lever inwards to help the gearshift indicator sort of sync up. It's a little difficult to have a PG gearshift indicator work correctly on a 4 speed 4l60e/80e trans. Sometimes it is the bearing in the base of the column causing a misalignment/slop on the gear lever. FWIW.

[@russelltrupia4479]

Sounds great good job Lucky

[@sanderdersjant9757]

Very nice build always o joy to watch your builds Lucky. Something i noticed watching te build is wy dont you flip the front traction bar upside down. It wil clear beter i think. I have done it a few times and set beter on te ground under load. Greets from the Netherlands

[@billscruggs5170]

Very nice

[@HotRod-wv4vm]

Enjoyed the video

[@seankillian5062]

Looks great

[@steelftw6097]

I’m building ac10 your my inspiration

[@ericfaley9019]

Truck turned out great. Sounds good. What’s really cool about it it looks like a sleeper. A few mismatched body panels that’s what makes the truck. I noticed that the 2 Nd time you installed the coolant Baum/ fill it was turned 180. I’m thinking poor seal causing no vacuum?

[@gasratzcustoms]

Rowdy!!!!!!

[@claytonargo3085]

Nice job… AGAIN. If they were MY fender wells I’d place a rubber flap over the inspection/work cutouts. Possibly removable. You never know when MT might ask you to compete. Plus it does rain in SoCal like once every seven years, right?

[@emma.j.nation]

The truck’s looking great, but one small thing - doesn’t the trans cooler trap air when it’s being filled, what with the connections being on the bottom? People said not to fit my engine oil cooler that way up for this reason.

[@Gerald5000]

For most people this would be a race build, for Lucky it's a 'parts getter'.

[@rguzzo3510]

lucky for president

[@dangarcia4152]

Badass ride man! What brand are those gauges that are in that truck? Looking to do something similar for my 1956 GMC

[@luckysgarageshow]

Dakota Digital.

[@dangarcia4152]

Thanks man! Love the show and thanks for everything you do!

[@Workin247]

So which power adder do you like better? Turbo or that 2300? My buddy had a 1900 on his 06 GTO and man that was a fun car. The supercharger makes a specific sound, as soon as you hear it, you know what it is. Truck looks great.

[@chukhentcy5642]

Shop Truck is now officially Bitchiner

[@jamesbergman4917]

Can you list a part number for the vacuum gauge you use please. I would love to pick one up. Thank you.

[@christwine3277]

Hey Lucky, love the channel great info as always. I have a 54 chevy truck, LS3 with and LSA supercharger on it and I was wondering if you had any issues stacking the radiator, AC condenser and intercooler heat exchanger. did you have any issues getting enough flow through all three for the AC and engine to cool properly. Thanks in advance for your time.

[@luckysgarageshow]

It does run about 15 degrees warmer in traffic but cool right down when moving. Runs about 210 most of the time. Intake air temp around 100

[@christwine3277]

@@luckysgarageshow Thanks for the quick response, I appreciate the info.

[@medicaided42]

wasnt there a flap on the fender wells to cover that hole from the factree ?

[@joym4955]

Awesome C10. I noticed that you have flexible brake lines coming off your master cylinder , is that a permanent set up? I was thinking on doing the same thing . Did not know if I need to do hard 3/16 lines or not. Thanks for your advice.

[@luckysgarageshow]

That’s temporary for the last couple years.... lol. Going to hardline it soon

[@joym4955]

@@luckysgarageshow Thanks for advice!

[@EldonsService1]

Lucky do yourself a favor and get rid of those old school hose clamps and put gates heat shrink hose clamps in place they look so much better plus when the engine warms up the clamps slightly tighten up to reduce leaks

[@notyper79]

@14:00 my gauges tell me that all the time! LoL I assume low fuel?

[@Robrt32]

I like it but I would have to have inner fenders. I drive my stuff and I don’t have the luxury of all paved roads in MS. The pretty motor would be covered in gravel orange quick. Oh ok you got some. I ran my mouth before I watched it all

[@MrJJRACING]

My buddy wants the same motor for his c10. What is ballpark amount to build one like that ?

[@rodolfocortez787]

You gonna take it to next gasrats meet 😃😃

[@rchaskin]

Are the motor specs anywhere??? This thing RIPS!!!!

[@luckysgarageshow]

Built by Ace Racing Engines in Torrance Ca.

[@jonathanpalahitski9596]

How much hp and torque that LS2 making now with that set up. Working with a similar build

[@shannonschneider8413]

That front mounted oilcooler under the radiator is way too close to the ground,just saying,every thing that you have done is bloody awesome,but that oilcooler though,cheers from australia

[@markwalker1158]

Are you taking the truck on Hot Rod Power Tour ?

[@ernieleduc9090]

Lucky, Do You recall the source of Your Crankcase Breather Box? Perfect for my F1. Must have one :-)

[@luckysgarageshow]

eBay..... lol

[@brentmclovin9332]

Do you ever plan to paint it?

[@michaelflores2680]

Not sure why the big justification regarding the cutting of the wheel wells. Other than that, the truck is tip-top.

[@peterrobins3708]

Do your neighbours make tubas or trombones? Almost a ships horn...

[@robertwaidman4170]

Why is your transmission pan so beat up?

[@joehaney4712]

Hey Lucky, can you use Evans waterless antifreeze and would that be better than regular coolant? Because I want to put it in my 2017 keep JKU.

[@luckysgarageshow]

Have not used it but sounds like a good product.

[@Welborn77]

What accessory brackets are you using to work with the magnacharger?

[@luckysgarageshow]

Wegner now.

[@twiztedracingokc]

What AC condenser did you install for your truck

[@luckysgarageshow]

Vintage Air

[@brandoncasares7624]

Where is that intake and filter frome?

[@luckysgarageshow]

Made it myself

[@gregcelaya955]

What cam are you using?

[@CamaroRick]

Only ones who ever have a problem are the ones not working on it 🧐

[@yamahaxs6501]

I like the idea of clearancing the wheel wells, but why even have them? Taking mine out was the best decision ever. open the hood, and boom...wheels and suspension. racecar. lol

[@khaledaziz8867]

Install some rubber mats on that inner finder

[@mightymikethebear]

I was thinking the same thing. He may not install them because he is a little less likely to go off road than the other Motortrend TV guys.

[@misterd3979]

I want that truck in the WORST way.

[@HotRod-wv4vm]

In NYC we blame 🐀 rats

[@notj5712]

Your trans cooler is mounted upside down. You're not getting the best or maybe much of anything out of it. (Unless you installed a bleeder in the top of it in that orientation.)

[@ericbooks8551]

Why is the shop truck the fastest vehicle you have

[@smirnoff56]

I think you need to sell me your truck so you can build another. . . ...😁

[@adamfrbs9259]

*than. You're not lucky in spelling....no worries....I got ya. Lol

[@JOHNJ0HN9111]

tell the bosses at motor trend to air the Kevin Hart now... cause motor trend isn't airing half the shows it usually does.. they are like half year behind on airing shows...

[@Robrt32]

No such thing as a good hamburger. I won’t say I will not eat them but I gotta be hungry to do it. I’d rather have a can a sardines

[@radbanshee4508]

Damn Lucky! Changing lanes in a intersection and you totally cut off that motorcycle. Disappointed it your driving skills.

[@luckysgarageshow]

It was a scooter and I was perfectly safe. But thanks for watchin

[@radbanshee4508]

@@luckysgarageshow LOL so you were

[@unclesquirrel6951]

Personally I blame squirrels

[@MrZX1206]

John Woodworth This is what you do with your life? Every video I watch you copy and paste the same lame joke. You are pathetic.

[@larryalexander4833]

California 👎👎👎👎👎👎👎

[@user-ge2qn6gp4o]

I trimmed my wheelwells a bit ago for sparkplug access, now I'm going to have to roll the edge.