MAGPUL WANTS THIS VIDEO BANNED (POLICE CALLED)(GONE SEXUAL)
@TWANGnBANG7 жыл бұрын
Nice!! :)
@kbnguy7 жыл бұрын
MAGPUL WANTS THIS VIDEO BANNED (POLICE CALLED)(GONE SEXUAL) ... and see what happen next. Epic! must see. You won't believe your eyes. Click now and buy!!
@locoguy4207 жыл бұрын
GONE SEXUAAAAAAAL!
@thatguy10806 жыл бұрын
(GUN PULLED)
@beausef14105 жыл бұрын
Lmao!
@1dogelsa7 жыл бұрын
I must be getting old because what we used to call common sense, is now called a hack... Good instructional video.
@nameless-og6 жыл бұрын
Charles Fields ... I had to watch this again because I didn't understand what the hack was either. I'm thinking about putting up a hack video tonight on how I clean my teeth. 😄 that said, I like that people take the time to do this stuff, because it's great to sit down at the bench and play something while you're doing it... Sort of like a reassurance that your not about to break the new thing you got. Just wish they were titled accurately... Especially since, if I ever load a vid after not affixing a rail for a year or two, this video clearly won't be the one I pull up due to the title.
@Raymo2u6 жыл бұрын
Common Sense means a different thing nowadays, its a metaphor to give up your rights for the false safety of others now.
@nameless-og6 жыл бұрын
Raymo_2_u HA, basically
@toddmerriott69016 жыл бұрын
Well said!
@maxwellmortimermontoure72746 жыл бұрын
Funny how over time people talk different, isn't it? Eventually a "life hack" is gunna be an old person thing.
@bobby19702 жыл бұрын
This video is by far the best explanation of how to make M-Lok installation work in a relatively easy way. This is a lot less complicated than all the other videos that other people have posted. This helps a lot of people.
@TWANGnBANG2 жыл бұрын
Glad it helped!
@50StichesSteel7 жыл бұрын
You forgot to add the screenshot with you holding the handguard at the screen with a surprised look on your face for the full click bait feel
@TWANGnBANG7 жыл бұрын
😬
@MoqtadaAlSadir5 жыл бұрын
yuck
@Walker_3285 жыл бұрын
But you watched it....
@inevitability15974 жыл бұрын
Came here looking for a comment like this, I am fully satisfied.
@1DRIPSTER4 жыл бұрын
Lol
@liggerstuxin12 жыл бұрын
It’s amazing how many tutorials didn’t show how to loosen and then tighten to lock it… 👍 This video is a public service. Great and simple tutorial.
@mentals5557 жыл бұрын
dermatologists hate him
@TWANGnBANG7 жыл бұрын
:)
@robertalford13216 жыл бұрын
Brother, I gotta tell ya...if you were east of Raleigh last night you would have known I was having a go at my first MLOK accessory installation. LOL!!! But then I found your excellent video, and I can't thank you enough. I can only imagine this instructional gem of a production has saved countless new MLOK purchasers from busting an aneurysm. Sir, you are appreciated!!!
@twombley965 жыл бұрын
This is freakin’ brilliant. I just tried this on my shotgun grip, and this worked PERFECTLY. Well done, dude. Huge props on this. Thanks for sharing!
@turdfurg472 жыл бұрын
This isnt some secret this Is in the manual for the handguard
@taylorbokshowan5713 Жыл бұрын
How did you do it before?
@twombley96 Жыл бұрын
@@turdfurg47 and? the video helped me out. if that bugs you too fucking bad.
@paulhayden34464 жыл бұрын
Your totally right. This is an easier way to adjust the T-nuts. There is a draw back from doing it this way though. When ever you go past the point of the right adjustment you are eating into the thread lock and it will not hold as well once you back it off. Just like going to far with a pipe fitting. If you back of the fitting you need to take it back apart and re-dope it. Doing the T-nut the correct and a tad bit harder way insures the best fit and staying power of the threads.
@landman1774 жыл бұрын
Good video. I just bought my first M-Lok rifle and I really was a little confused when I got it (yep, I just turned 60). I carried a modified A2, M-14 or M40. "Never Forget Beirut" !
@mixflip6 жыл бұрын
Why would Magpul hate this trick? Am I missing something????
@TWANGnBANG6 жыл бұрын
The joke. You’re missing the joke.
@joesaxon65664 жыл бұрын
@@TWANGnBANG there is no "joke" just a stupid title
@toddboone3334 жыл бұрын
@@joesaxon6566 It’s clickbait bullshit. There’s no joke.
@areus20163 жыл бұрын
Salt
@joshuaoh9123 жыл бұрын
@@joesaxon6566 so savage
@grenade.turtle5 жыл бұрын
Residents in Lawrence Kansas didn’t know this simple trick could save them millions
@dongarrett62284 жыл бұрын
Should have came to k.c.ks.........lol.
@brendanmarriott6613 жыл бұрын
More like Ottawa
@ashketchup95557 жыл бұрын
has science gone too far?
@TracyGossett Жыл бұрын
Bought my first rifle ever (and I'm 45) yesterday, then watched a bunch of videos saying I needed a sling, so I bought a sling with an mlok sling mount point and have been struggling until I watched this video. I wasn't backing off the screw far enough because one video said 180 degrees which wasn't enough. Thank you for this video.
@nameless-og6 жыл бұрын
Man gathers custom rifle accessories, check out Jennifer Aniston's shocking reaction!
@StateofFreedom1 Жыл бұрын
Good video, I've owned all types rifles my whole life and have stuck to the basics. I finally decided to check out the M-Lok connection platform and had no idea how they worked and I'm not ashamed of that. Every arrogant person commenting on this had their first day handling this style product wether on construction or firearms. They also stopped to watch the video 😂 knowing so much. Maybe they got click-baited into it.. it's a real thing. I installed my first M-Lok rail setup yesterday on my AR. I'm a fan of the product now. Thanks for your help. It is super simple but you don't know what you don't know.. grow up boys.
@zukkuszukkus68037 жыл бұрын
next video:!ATF wants to ban this technique
@filpaul7 жыл бұрын
bob smith No kidding: With President What's his face, they were floating the idea that you would need to bring your firearm to a ATF licensed gunsmith for any work done, even what's in this video. And fill out another background check when you pick it up of course.
@PikeyScott7 жыл бұрын
Fun video. Thanks for sharing the trick. I wouldn't be surprised if Magpul updated their install instructions to utilize this method. Blind install with absolutely zero guess work.
@drmaudio7 жыл бұрын
A soccer mom discovers this one weird trick!
@TWANGnBANG7 жыл бұрын
:)
@davidbutera59857 жыл бұрын
That's how I did it the first time I tried. Never bothered with Magpull instructions for something so self explanatory. When I saw this video I kept watching waiting for the hack lol
@allenjohnson49384 жыл бұрын
David Butera it was so ez i couldve sworn i did it wrong because all the videos are 20min plus
@ericjohnson80013 жыл бұрын
IKR!!?? Im sitting here waiting, waiting...when's the "ah-hah" moment?? I feel cheated and used.
@jaredgraber20002 жыл бұрын
I did the same thing when I got my ar15 and thought that's how everyone else does it and also I never heard that magpul hated it.
@danbuckley65844 жыл бұрын
Wow! Thanks! I was using bubblegum to hold my mlok on and thought the screws and stuff were "extra parts". I feel so tactical now!
@eXdXgXe4life7 жыл бұрын
Why would magpul hate this?
@TWANGnBANG7 жыл бұрын
It's just a meme done for humor.
@MikeHawke837 жыл бұрын
TWANGnBANG well I was wondering how this would help pick up girls and give me killer abs.
@WHITEBELT447 жыл бұрын
Magpul hates clickbait
@mastalee17767 жыл бұрын
Chip Hardee it's a way for people to click on the link. everyone's doing it and it works. at least his info is good info. just part of thing youtubers must do to keep up
@EagleRun237 жыл бұрын
Chip Hardee that's a silly reason to unsubscribe.
@DelightfulTyrant7 жыл бұрын
That click bait title, nice. "Centipedes, in MY AR-15?"
@DelightfulTyrant7 жыл бұрын
Match grade Wolf Ammo? Has Science gone TOO FAR? REAL or FAKE
@Coconutgirl2607 жыл бұрын
keymod isnt MLOK
@DelightfulTyrant7 жыл бұрын
Shanna, neither of us said it was so I'm not sure what you're talking about.
@kingsupreme252 жыл бұрын
Sheeeesh ....4yrs later, your still saving lives.... Damn. This thing was starting to piss me off lol . Thanx
@dreamerx237 жыл бұрын
1 in 5 dentists don't recommend this
@TWANGnBANG7 жыл бұрын
:)
@futuresonex6 жыл бұрын
Before it's BANNED try this other tip that makes it even easier! Use a micro bit driver with the appropriate sized bit rather than a simple Allen key. Most micro bit drivers have a pommel that spins freely. It's really easy to keep pressure on that screw by simply putting that pommel into the palm or your hand while turning it with your fingers.
@wacokid65886 жыл бұрын
If you're over 40, you can't afford not to see this!
@TWANGnBANG6 жыл бұрын
:)
@davidmoorea19614 жыл бұрын
Amen!
@charlesbeall2589 Жыл бұрын
I use this method but first thing I do is grab a driver handle with the proper sized bit. Sure makes for a simpler process. My 'OCD' also prevents me from buying any other M-LOC rails(when I need a 5 slot) but Arisaka 5 slot with 3 fasteners. They don't sound like it but they're even made in the US.😁
@GreenJackal7 жыл бұрын
Click bait beat down.
@TWANGnBANG7 жыл бұрын
I think too many of my viewers get the joke even if a few don't.
@jacobridgedell20967 жыл бұрын
TWANGnBANG I haven't watched one of your videos in a while, but laughed when I saw that so figured I would watch it. but yea most of my spam says weird trick lol
@nagasako77 жыл бұрын
Top 10 Gun Clickbaits of 2017
@TheSkipper19216 жыл бұрын
Well, I'd say by the negative thumbs down votes it's about 1/6 think it's clickbait....so far......
@wage45984 жыл бұрын
@@TWANGnBANG we get the joke its just so dead and unfunny its considered an insult
@Benjamin.Bushcraft4 жыл бұрын
M lock the perfect example of how “progress” can be a backwards step! This video helped a lot though. Thanks!
@zachconant70317 жыл бұрын
Doctor's hate him
@MrMd55557 жыл бұрын
Zach Conant... But parents love him!
@bryanmunson16854 жыл бұрын
This popped back up on my Recommendations and I had to watch it again. Can’t like it twice so I’ll just leave a Thank You. I hope T&B is doing well I these C19 times. God bless brother
@jeremiahjordan44223 жыл бұрын
Just added an MLOK Hand Grip and attached my first accessory to it quickly an easily thanks to your tips. I saved this video for future reference, though I think I'll remember. Thank you!
@saxmusicmail3 жыл бұрын
GREAT! Just got my first M-Lok forend and accessories. This tip made it easy. Thank you!
@tylermurphy40207 жыл бұрын
Hell yeah now I can get my certified youtube armorer patch haha!
@garteaga4822 жыл бұрын
I just fiddled with my m-lok for like 30 mins then found this video and it worked instantly. thank you for posting this trick!
@TWANGnBANG2 жыл бұрын
Glad it helped!
@omardumbrell4356 жыл бұрын
Haters will say it's been photoshopped.
@TWANGnBANG6 жыл бұрын
:)
@TheBarefootedGardener2 жыл бұрын
Holy shit! This trick takes Mlok accessory installation from F-bombs to “the bomb”! Thanks so much Twang n Bang!
@ytbenavraham95534 жыл бұрын
Thanks for that. I knew there was an easier way to mount the rails.
@Doublezzranch4 жыл бұрын
THANK YOU 🍻 I've been going crazy setting up my SCAR'S KINETIC forend and all it took was your video to get me going 👍. Your friend in OREGON 🤠
@mrrustygray7 жыл бұрын
That's cool. I still have quad rails on one AR, Keymod on another. There is no magic unicorn. Some people get so hung up on the hype they cannot contain themselves.
@gpants14817 жыл бұрын
Quad rails work and are strong. The only reason I moved away from them is to reduce the weight. I am a contactor and carry a D20RS which is a Heckler & Koch, HK-416 variant for 10 hour daily. If you want to make your rifle lighter I recommend using MLock as it is superior than Key Mod systems.
@inlandbhsk8r5 жыл бұрын
Stuckgrenadepin same. I have quad rails on all of mine, I like them better anyways, never mind giving into the hype
@danfromthesouth53523 жыл бұрын
I am new to mounting accessories to M-Lock, so this hack has been VERY helpful!! I don’t understand the frustration in the comment section though. The other videos I’ve watched, they did it a totally different way...I like this way better.
@TWANGnBANG3 жыл бұрын
Glad it was helpful!
@griff88584 жыл бұрын
Took me almost four minutes to realize it's meant to be comedic. You're too accurate to what firearm channels are actually like these days- you were two years ahead!
@andycapsphotos4 ай бұрын
You’re the first guy who successfully explained this to me. Jebus this was hard to figure out by yourself.
@TWANGnBANG7 жыл бұрын
For those unfamiliar with how Magpul says to do this, here are the instructions they include with their accessories. Two whole pages are spent instructing you to measure rail thickness, attempt to match with t-nut spacing, remove and repeat until you get it right (PDF file): www.magpul.com/Files/Images/PDF/M-LOK/M-LOK_Tips.pdf
@dannyo3836 жыл бұрын
TWANGnBANG yeah fuck that... your instructions are looking way easier
@OGDoubleJ6 жыл бұрын
TWANGnBANG interesting. I literally did this out of box without reading the information haha. No idea you were supposed to measure
@bigjake41226 жыл бұрын
TWANGnBANG the way youve shown in this video is actually the way i was taught to install these and if anyone is nervous about doing it this way and doing something outside of the instructions we have shot full auto set ups 5.56 7.65 300 blackout etc using this mounting technique over and over till you could cook bacon on the barrel and weve never had one get lose on us yet! great video twang!
@Cnoah486 жыл бұрын
Good info. But the “magpul hates this” click bait is pretty lame
@FUBuddy6 жыл бұрын
they probably actually do not approve, doing this will mar parts, leave scratches and what not that would not happen if you take your time and go by the manual. i just use a small crescent wrench and eyeball it, little trial and error but pretty much everything is first time go
@davidshaffer46492 жыл бұрын
Man,just bought my 1st ar and looked at the mloc sheet and thought what the hell.they really should have people who use the product make the instructions.always found engineers can find a harder way to do the simplest thing.found your vid 15 min.after I figured it out.still enjoyed it.thank you.
@surratt957 жыл бұрын
Damn. I never read the instructions on how to actually do it. I actually have been doing this hack and never new it!!! Screw instructions.
@TWANGnBANG7 жыл бұрын
:)
@JM-xi6yn6 жыл бұрын
Bob Surratt destructions are for people with no imagination
@petercrawford81126 жыл бұрын
Bob Surratt me too lol
@maxwellmortimermontoure72746 жыл бұрын
I did! Now I have paper cuts on my johnson...
@Pipizzakitchen5 жыл бұрын
Honestly, I think that's how everyone had always done it.
@ixnorp4270 Жыл бұрын
I am about to order my first M-LOK accessories. I'm glad I found this video, as it illustrates quite well how the system works.
@cwolf88414 жыл бұрын
Surpising MagPul instructions don't tell you you need a 7mm wrench and a 1/8" allen.
@terrycostakis62844 жыл бұрын
No longer will I dread mounting M-Lok devices. I had two of them mounted within five minutes and even mounted one upside down, then removed it and reattached it correctly still within the five minutes. Thank you sir.
@DB.KOOPER9 ай бұрын
This is the only way that makes any sense to install the T-nuts and I;ve been doing it since M-lok came out. Why would "Magpul hate this"??? Nie click-bate title.
@dr.dragon80033 жыл бұрын
A lot of morons don't understand seo optimization and why the word "hack" was used. Being under 50, I understood why. This was helpful to me. I now don't have to fiddle my mlok stuff as much AND I realize why everyone hates the gun community so much. Thank you for the video and please ignore the stupid comments. 🤘
@Carpythesharky5 жыл бұрын
I thought this was the standard way to install M-Lok accessories? I haven't read Magpul's instructions, only instructions that come with the accessory itself. Also this is how my local gunsmith explains to customers how to install it. Hmmm... common sense people? Good video nonetheless.
@nightcat874 жыл бұрын
Definitely worth its own video. Gotta love little tricks to make your life easier.
@digitalbuzz5 жыл бұрын
"You have to push it in or it doesn't work."
@jpromano_3 жыл бұрын
This is genius! This should have been the installation instructions from Magpul. Thank you!
@privatesector04226 жыл бұрын
Hi I'm Magpul and I hate this trick I absolutely hate this trick I wanted to be dissolved I wanted to be hung I wanted to be shot I hate this trick I can't stand it!!!!
@kaufmann857 жыл бұрын
great tip. I preferred k-mod to m-lok because I thought it was hard to attached m-lok accessories. This will help.
@kohnfutner96374 жыл бұрын
I'm amazed at how difficult and over complicated forearm accessories companies have made guns.
@wayartio4 жыл бұрын
Outstanding video sir. I discovered this by mistake and it is how I have been installing these devices. Thank you!
@bigred29897 жыл бұрын
Why the hell doesn't Magpul put that in the instructions? It would be so much easier to attach things if I knew to try this.
@TWANGnBANG7 жыл бұрын
I honestly don't know. Sometimes engineers are better at designing things than using them. :)
@tonyz28977 жыл бұрын
If I had to take a guess, it's because adjusting as you tighten ensures that the final tightening will be done into fresh threadlock compound, not compound that's potentially displaced or stripped off by having the threads pass over it multiple times.
@ryanmatsuoka87247 жыл бұрын
Probably want u to strip the nut or screw so u gotta buy new ones
@OneWildTurkey6 жыл бұрын
lawyers and liability
@mattelder19716 жыл бұрын
Sometimes? That's basically every engineer ever. Most of them have zero real-world experience with the products they design.
@pravoslavn3 жыл бұрын
Another excellently done presentation from the Master himself. You and Mr. Harrell leave all the others in the dust...
@TWANGnBANG3 жыл бұрын
Thanks so much!
@homersimpson69697 жыл бұрын
This isn't a hack. This should be part of the standard instructions on how to install M-lok. P.S. The word Hack is misused and overly used incorrectly. This is one of those times. I still love your channel.
@TWANGnBANG7 жыл бұрын
The meaning of the word has long changed to include "improvised solution." That's what this is.
@nikolaik35417 жыл бұрын
The "beauty" of language is that it evolves. Go ahead and compare modern English vocabulary to that from a century ago.
@homersimpson69697 жыл бұрын
You are right, the beauty of any language is it can evolve. But just because one person, or a thousand people decide one day to change the meaning of a word through ignorance or defiance, does not make it correct. Here is a link to several misused words that are used every day. And one day if the definition of any word is changed or adjusted, or publicly accepted, so be it. But to continue to use words incorrectly only shows ignorance. www.independent.co.uk/life-style/the-58-most-commonly-misused-words-and-phrases-a6754551.html
@jjohnston947 жыл бұрын
I was disappointed when "hacker" stopped being somebody who was bad at golf.
@stephenlott90046 жыл бұрын
homersimpson6969 - I literally know what you mean. I'm literally glad I'm not the only one.
@themightycrixus11312 жыл бұрын
Very useful video. What seemed like an easy install involved some fiddling before I found this. After it not feeling as tight as I wanted I kinda figured this trick accidentally. Thought I may have stripped my new foregrip!
@Mrgunsngear7 жыл бұрын
perfect title
@TWANGnBANG7 жыл бұрын
😬
@heyzoos-cgr93696 жыл бұрын
Ah the obligatory Mrgunsngear comment on a gun channel for a bit of advertising ;) Lol
@DEATH_TO_TYRANTS6 жыл бұрын
all the 3 comments above mine, made me laugh my ass off.
@lightingfires80265 жыл бұрын
Florida Man wow doesnt take much to make you laugh. r u a little on the spectrum?
@techti87924 жыл бұрын
@@heyzoos-cgr9369 LMAO. right. He pops his head in every gun channel
@eljuano286 жыл бұрын
I never read the instructions. Glad I didn't realize that I was doing it "wrong." Some things are self evident. Nice to see someone else figured it out. 😋
@RandomDude45_X7 жыл бұрын
2-3 Dentist perfer Colgate.
@nickjensen55587 жыл бұрын
Thank you! I'd given up on adding a rail a week ago but this made it so easy.
@Dabkilla7 жыл бұрын
seriously? I thought this was common sense ??
@dontask89797 жыл бұрын
BangSwitch It is...
@Sig3203 жыл бұрын
You can put a small piece of electrical tape at the end of the thread right where it rotates freely that way it doesn’t back itself all the way out at the same time marking the spot.
@mklawson837 жыл бұрын
Click bait title. Used the word hack in place of tip. Said, "X hates this..." No Twang and Bang intro. What is the world is going on?
@georgedean85095 жыл бұрын
You can use a 7 mm open end wrench on the T-nut rather than the Crescent wrench or pliers. Neat trick, BTW. Recently I needed to cut one screw to the minimum length to get it to turn into place between the gas block and handguard's flats for a bipod stud mount. It cleared by a whisker. I put the screw in a vice and cut it using a Dremel & cutting wheel.
@choke6665 жыл бұрын
BIG THANKYOU! I WAS GETTING P*SSED, BUT ITS SOOOO EASY! :) TY!
@Hightower15456 жыл бұрын
Thank you!!! You just saved me from high blood pressure 😂
@BossinDawson2537 жыл бұрын
M-LOK for the win
@Fusako8 Жыл бұрын
Very useful for me. Just mounted my flashlight to my hi-point 10mm bullpup PCC. Love that goofy gun, it is sooo. . . different.
@stevenpeterson84447 жыл бұрын
great hack!
@chewy69424 жыл бұрын
You can also just start the nut insert it like he did and just start tightening until it stops turning on the nut side and your go to go. No need to tighten all the way, loosen and retighten. This work the same as the hilti spring nuts I use daily on c channel iron work lol! Everything is so complicated these days!!!!!!!
@DJ_CRIZP7 жыл бұрын
or you could just go with keymod and not screw around with this...
@Really-AintBuyn-nit7 жыл бұрын
Crap system for mounting. Drop your riffle and see what falls off.
@kentuckyboy5417 жыл бұрын
Doug Castetter. precisely
@joerichie55556 жыл бұрын
For sure go with key mod... I mean who wouldn’t want their accessories to fall off when bumped 🤦🏻♂️
@CHI-TOWN_FELON_6 жыл бұрын
Keymod is garbage
@MrEvanfriend6 жыл бұрын
Keymod AND M-Lok are garbage. Quad rails work exponentially better than either, and the only "con" to them is the "cheese grater" nonsense that anyone who has actually used them knows to be false.
@betweenthebars194 ай бұрын
I’ve never been able to do one of these properly by feel. Always had to see it enough. But still managed to be successful in all my uses of them.
@ericrhodesbusiness Жыл бұрын
Hard to believe that we have self driving cars and Mlok jammed full of crap to get a 1990's rail on is the best we have. Good video btw.
@hunterg60687 жыл бұрын
I'm glad to see so many people get the joke, yet feel sorry for those who are getting so butt hurt. Regardless, great tutorial and so much easier than Magpul's instructions.
@stevenbelford82674 жыл бұрын
Disregard that I skipped one small part of the process. Worked great. Thank you for the knowledge
@honkerh8r5644 жыл бұрын
I don't know why Magpul would hate this vid. I thought for sure it would be clickbait. I was pleasantly surprised to find this was a very informative, and to the point tip! Thanks!
@jaredc82812 жыл бұрын
The definitive video on this topic. Bless you good sir 🙏
@EyesadriftVA7 жыл бұрын
Right on thanks! Will be getting one for my AR at some point. Will keep this in my back pocket.
@0neTwo37 жыл бұрын
2 minutes in and I knew right where you were going!! GENIUS!!!!!
@TWANGnBANG7 жыл бұрын
Thanks, Nathan!
@blackrifle37425 жыл бұрын
You’d think Magpul would love that your sharing how to make their rail system easier to use.
@deplorabledave10484 жыл бұрын
Ohhh. I just started using Mloc and did not know this. Great! This will help things out a lot!
@shaq1 Жыл бұрын
I hope I don’t sound like I am showing off but I had spare curtain pole latches which I sawed the straight parts off then screwed them on to my air pistol, I put one on the bottom for my laser and one on top for my sight scope and it worked but I have ordered a M-Lok Aluminum Rail Mount Handguard so I will use this video when it arrives although I don’t have any issues i am sure it will look better with the add on mounts.
@JoeUglyFatMama4 жыл бұрын
The only reason I clicked was "Magpul hates this trick" LOL But it was neat and I might need it one day if I switch to Magpul stuff.
@florious803 жыл бұрын
Great video. The cam wasn't working for me but this video with the advice to tighten all the way then back down was the trick!!! Thanks!
@The_Chad_Davis Жыл бұрын
Magpul uses too strong of a thread lock, in fact if you don't pre-thread then back off you run the risk of tightening down once and having to drill out the t-nut to remove. Unless you're doing a tour downrange and an accessory falling off means difference between life and death you don't need thread lock, tnuts get plenty tight on their own. Great instructional.
@InSightFreedom5 жыл бұрын
Great hack. I have yet to mount a M Lok accessory but that’s about to change with the Ruger Precision. Thanks.
@imHim7107 жыл бұрын
thanks for teaching me this. I recently installed a rail and this would have been useful to know before
@adamberndt41902 жыл бұрын
As an employee of MAGPUL I can honestly say, No.... No we don't have any problems with people doing this to a product they bought and paid for!
@JJ-ln9si3 жыл бұрын
Excellent vid, thanks! Worked perfectly! Did not have to take the handguard off which really made my day (not literally I'm pretty happy).
@Not_Sure-20206 жыл бұрын
FYI, it'll take a lot less effort if you put the Allen wrench's short end in the screw and use the long end in your fingers for leverage.
@Phut687 жыл бұрын
Sweet! I'll keep this in mind on my next mlok accessory.
@stukas076 жыл бұрын
Thank you thank you thank you. I have a 1 piece hand guard where I can't get to the back of it. I was at this for over an hour. After this video, got it perfect 1st try in 10 secs. Thanks again.