Machining and Honing Process of Loader Rickshaw Front Wheel Hub || Production of Rickshaw Wheel Hub

Machining and Honing Process of Loader Rickshaw Front Wheel Hub || Production of Rickshaw Wheel Hub
#howrickshawwheelhubaremade #machiningprocessofrickshawfrontwheelhun #

[@alfredomosquera5832]

My sincere admiration to a nation that with minimum resources, without sophisticated machinery or robots. can create useful things. Cheers from Venezuela.

[@butterwortha1]

Its not hard, most of the tools and processes are from first world countries

[@timothygeiger8271]

With free enterprise, true & honest capitalism, they could have the resources of developed countries. I'm guessing that conditions in your country of Venezuela aren't much different than this video?

[@38911bytefree]

@@butterwortha1 Bet that the count for lathe operators in "first wolrd countries" has fallen brutally due to high costs and cheap Chinesse crap that is the preferred choice to save every penny. Same that submit plans for condos with the slab loaded to 99% right from the very first minute or made an alpha sensor disagreement light an optional feature while a poorly programed system accepted corrupted data deflecting the stab to no sense angles, overriding the pilot and killing people not once but twice, and failed miserably to hide the scandal. Now lets cry about this guys in sandals.

[@ПавелКузнецов-г5ж]

Что вообще меня поражает в таких видео... вот видишь ты ступицу своего автомобиля и у тебя в голове сразу: большой завод, станки с ЧПУ за десятки лямов, литейка с лабораторией, ОТК, целый отдел технологов и конструкторов, мужики с дипломами и пр. А потом видишь это видео на ютубе, где в гараже плавят чермет парни в шлёпках, где литейную форму утрамбовывают ногами, где токарь возможно думает что штангенциркуль это какойто зверёк, и всё это на станках прошлого столетия... Я уж молчу что большинство работы выполняются традиционно на кортах.

[@russiapelosolhosdosrussos8089]

Да и состав металла у них всегда разный, поскольку плавят все подряд, без хим анализа. Про термообработку вообще молчу, где их ОТК? Сколько прослужит их изделия? Они конечно молодцы, работают.... Но....

[@АлексейКлючко-л7г]

Д - дешево.. наверное большая часть для внутреннего потребления. "и так сойдет".

[@TheAmd481]

@@АлексейКлючко-л7г не большая часть, а ВСЁ. Всё, что они делают, разваливается моментально. Нужна постоянная замена. У них спрос опережает предложение

[@valdemaar3000]

Вообще-то они должны сказать большое спасибо британцам что оставили им эти (пускай и устаревшие) станки. Все видео - одно и тоже: процесс отливки металла в разные формы. Всё чему их выучили чужеземцы на своих станках, то и делают. Своего мало. ...хотя нет! - корзинки плетут офигенно😆

[@МурадМурад-м7щ]

@@TheAmd481 а что на больших заводах всё так же

[@Cetych]

Так вот почему оригинал ступицы стоит так дорого! РУЧНАЯ РАБОТА=)))

[@vitalin5953]

Ага. Один подшипник повезло установлен был с натягом, а со второй стороны зашёл на легках. Не удивлюсь, если он был сделан этими же индусами с такой же точностью. И в конце покрасили, чтоб ничего не было видно. В том году покупал опорные подушки на Калину - одни тоже были покрашены прям по резине. Решил лучше взять оригинальные ВАЗ - там не было крашено. Там на удивление было всё сделано аккуратно и качество было видно на лицо. По сей день всё с ними нормально.

[@BagsRivaRaet]

Always here I'm to support from very hard working Man Philippines 👍

[@AffordBindEquipment]

gotta love the safety squint by the guy feeding the furnace.

[@terratrekker2]

What about the safety shoes?

[@AffordBindEquipment]

@@terratrekker2 Those are certified steel toed flip flops.

[@jazeenharal6013]

Hahahah

[@mp6756]

I wonder what the lathe operators could achieve if they had insert tool holders. They definitely deserve a shit load of credit for pumping out a large quantity of work with rudimentary tooling. And the kid operating the drill press is kicking ass.

[@BrassLock]

That drill press operator has too many different task changes to do with one lousy chuck. No wonder he uses a lever and hammer.

[@miguelsepulveda7059]

aaññpp

[@miguelsepulveda7059]

P

[@miguelsepulveda7059]

P

[@somethingelse4424]

Oh my God, that pyramid of parts sitting behind them... And the sheer amount of time it took to turn one hub. I found a 1980s Mori Seiki SL-2 CNC lathe on eBay for like $5k. Surely the owner has that kind of money. They would only need like 500$ worth of tooling for this job.

[@enyquesti]

А потом производитель такий и говорит, мы не предполагаем замену ступичных подшипников отдельно без ступицы, потому что при замене вне завода невозможно обеспечить точную установку подшипника в ступице 🤣. Покупайте оригинальную ступицу в сборе с подшипниками

[@nicodim1]

Лучший!

[@РудикРудик-ш4ч]

Так и шпильки в разные стороны смотрят...

[@siya4543]

More ap The In

[@westozzie62]

Love it! people working together to support their families.

[@TheSchafsviech]

Satire?

[@rustysteed8414]

That drill press table has more pecker tracks than the back seat of my first '57 Chevy!

[@sandua51]

I always cry for the drill press tables in these videos. I've seen apprentice marks before but holiocrap!

[@somethingelse4424]

Nah, thats just part of the fixturing. All those holes are job specific. I'm half joking, the kid did seem to rotate the table to a certain hole that aligned with his operation. It was hard to watch him tap those holes raw dog though. I don't know what he dipped that tap in, but it sounded like he would have been better off spitting on it.

[@osuav8r]

Them pouring molten metal in their South Asian safety boots is terrifying.

[@LeonardRoberts]

Did you happen to notice the guy on the right side do a little dance when they were pouring from bucket to bucket. LoL

[@travelling_stephen]

For you maybe

[@therollintoolbox3547]

Nah those came from the workshop across the street u know next to the starter guys

[@timothygeiger8271]

@@travelling_stephen oh, you would pour molten metal in sandals like that?

[@twayne_smallville83]

do you think it's very dangerous and unsafe, it's true it's not safe and it's dangerous not in accordance with work safety standards, those who work only think about how to survive to eat and support their family ! their life is hard and difficult their lifestyle is different from their lifestyle your life.. so respect and respect other people's customs, if you need to help them, life is not as beautiful as you imagine, learn from life then you understand. maybe you have never traveled to south asia so you don't understand the customs of asian people... learn from the lives of others then you will understand the meaning of a life of sacrifice and hardship..

[@actanonverba2233]

Gotta get a pair of those safety flip-flops for the summer..!

[@travelling_stephen]

Real men wear them in the winter as well just by adding a pair of socks and in extreme conditions a plastic bag over the socks for waterproofing and thermal insulation.

[@ostravan]

Hell on Earth is back, sandals edition. You have my admiration guys.

[@nswiss19751]

Wonder how many toes have been chopped or smashed off

[@dennisyoung4631]

Ever seen *foundry boots?* Big thick metatarsal guards, like a whole extra layer of doubled thickness leather atop nearly the whole of the foot. Saw these at ESCO, fall, 1988.

[@michaelbedell6523]

I truly appreciate you have to do with what you have. Scary, but admirable. Obviously the risks are known and you respect them.

[@vadenfagner6277]

Got to say these young men don't spend there time on the computer or Xbox playing games, like kids in North America. Great Job

[@ahmedabdi4740]

Good to see the youth up to doing hard work and an honest living better then most.

[@sergegostoli9524]

oh yeah great to see child labor replace education

[@ahmedabdi4740]

@@sergegostoli9524 and how do you know the young men in these videos arent in school? And where is the "child" in this clip. And what's the point of education when there no jobs for the educated? When they could have a much more productive and better life learning a skill but of course it takes and arrogant simple minded westerner to takes he short sighted and simple minded task to sale.

[@sergegostoli9524]

@@ahmedabdi4740 Because if they were in school they wouldn't be working in a factory.... As for the point of education.. sigh never mind... go ahead and don't try to change your system, seems to work fine as it is, remind me again what the average life span is in Pakistan ?

[@Rog72002]

О-о-о, да тут "культур-мультур" на производстве намечается - токаря не бросают заготовки на пол, а нежно так ложуть!!!

[@dennisalloway5788]

The craftsmanship and improvising are incredible with the tooling they have.

[@SUP-2101]

9:55 Все как Бербраер учил - детальки надо складывать в пирамидки)

[@пртпрыпкраоырпаыартарекырекырк]

Похоже стул и стол это этап дальнейшего развития )

[@thedoor5442]

I used to give our Safety Dept a hard time by wearing only one ear plug when they were around, and pretending not to notice! If they saw this operation they would have a stroke!

[@provousa2253]

This is what real hard work looks like, We just look at them like something is wrong lol and for them it's" just another day at the office" ; O

[@kevindabbs230]

I have to say, those look like some good quality parts.

[@svenp6504]

OMG, the tapping... oh the humanity!

[@stewartross1233]

Good one, I burst out laughing loudly when I read this!

[@TheOwlGuy777]

This so much better than America. Everyone has a job and they are all equal.

[@jimfarmer7811]

The reason American is so much richer than these people is because the US abandoned this primitive technology 100 years ago.

[@d.jensen5153]

Turns out I've been babying my taps all these years.

[@nelutu6506]

Protection equipment??? Yes,we have very good flip-flops...

[@lawrencemanning]

It's the garden chairs that do it for me.

[@FrustratedBaboon]

Indigenous tribe at work!

[@fredflintstoner596]

GLAD TO SEE THEM ALL WEARING SAFETY FOOTWARE

[@albert_sh]

В прошлый раз тут гильзы блока отливали)

[@CoHBe6etuyx]

и полуоси еще делали))

[@ЮрийПятницкий-ш8б]

А им пофиг че делать. У них полный так сказать технологический процесс)))

[@russiapelosolhosdosrussos8089]

Во время плавления металла они должны делать химический анализ, и в случае отклонений от норм, они должны компенсировать специальными феросплавами . Но на видео этого нет. Предполагаю что их готовые изделия всегда имеют разный химический состав, а это хрупкость, твёрдость и так далее, что сказывается на длительность эксплуатации изделия.

[@taza99]

They make perfect alloy every time!

[@НашСемейников]

" Они должны " ? Они никому ничего не должны ! 🤣🤣🤣 .

[@TheAmd481]

"длительность эксплуатации изделия". В пакистане это две недели

[@ostsee7737]

Genau richtig, ist mit Sicherheit Ware die keinem hohen Anspruch genügt

[@Нурик-з7у]

Это было в ссср отк.

[@adnanshuja4075]

Hard Work and Skill Fast Working with obsolete equipment and tools, honestly working Continuously Producing Quality Products. Allah Bless these workers of my Country with so much Reward here and then after. They Please be Provided Safety Devices Like Proper Uniform, Helmets, Safety Shoes, Goggles, Gloves and Material Handling Equipment like Roller Conveyors , Lifting Devices and alike Tools by which their Output with same Hard Work would be doubled. Good Effort for Producing this Video. Thanks a Lot The Mechanic.

[@stoveguy2133]

That’s how they made my wheel bearing for my Chevy.

[@csabatakacs2766]

Ez igen ilyen technikával👍👍👍👍👍👍

[@pufango4059]

Excellent A++++++++

[@bodzio16005]

Nowy detal i już porysowany na betonie.Oglądam kolejny film i wszystko robione jest na kolanie bez chronienia obrabianych powierzchni. Pomijam już wykonanie otworów pod łożyska na "macanta "

[@comettoPL]

Dla mnie to szok, ta robota.

[@АнатолийСергиенко-я9с]

А,мне понравилось, парни молодцы,в таких условиях творят чудеса по-сути. всё дёшево и быстро,главное есть результат.

[@SUP-2101]

Резиновые шлепанцы оказывается - лучшая обувь для литейного цеха...

[@МАШИНИСТ-р9м]

Интересно, помещения, в которых они работают - это остатки какой-то былой цивилизации??

[@ЮрийПятницкий-ш8б]

Да. Англичане понастроили. Потом потеряли свою колонию.

[@skilltruckrepairer3597]

really great

[@Mojoman57]

Wow. They almost have closed toe shoes on. Amazing.

[@serega7573]

Когда сверлите поливайте хотябы водой. Сверла на дольше хватит. 😁

[@nowheremanjk8624]

The safety shoes are great :-D

[@славафильмоскопов]

Единственный за все время, кто пользуется стулом - это молодой паренёк.

[@dinadivinagracia9149]

Very hard working

[@mdf2mdf287]

The sub-continent dedication to net zero manufacture and their devotion to the 1974 Health and Safety at work act.

[@dmkpredator]

Пацан зажимает сверло как бог! А оператор хоть бы крупные планы не снимал - не видно было б косяков.

[@ВиталийПотапов-п6ф]

ему лет 12

[@ruslans8033]

Мне стало жалко сверлильный станок.

[@игорьмолчанов-т9в]

@@ruslans8033 Cверловщик ,варвар еще тот.

[@Пися_Камушкин]

Мне захотелось ему пальцы рук этим же молоточком поколотить!

[@dariusrakickas8382]

И резьбу делат такую прекрасную непотя инструменты .

[@Cat-qc6vi]

Совесть, лучший кантралер👍👍👍

[@tuanduong1708]

Tôi đến từ việt nam! Tôi thấy các bạn nên có đồ bảo hộ lao động, nhất là bụi trong không khí quá độc.

[@herifloj8406]

СПЕЦ ОДЕЖДА ПРОСТО СУПЕР 😆😆😆😆ЧИСТАЯ КОЖА

[@fathersrelaxinglife3004]

splendid

[@Miguelet-1]

looks clean & safety place...

[@dimonio1090]

Парни красавцы. Уважение работягам

[@MyDIKOS]

Какие химические анализы это ручная работа все четко

[@asteverino8569]

Casting by hand and with much work. 🙏🏽🙏🏽🙏🏽🙏🏽

[@craigstaggs8597]

Looks such a nice , safe workplace .......

[@travelling_stephen]

They seem to have no problem with it.

[@MuhammadImranOfficial]

Great video

[@robertordewald8678]

Excellent job man it's a pity you have to work in such conditions but you do get excellent work my congratulations. Shanks from Virginia USA

[@gersoncosta7104]

Muito bom trabalho..like do Brasil.

[@evgennnable]

Я так понимаю на СЛАНЦАХ весь мир держится)))))))))

[@ЮрийПятницкий-ш8б]

Правильно писать В сланцах😂

[@josebermudezleon9642]

Lo que más me gusta de estas personas son los EPI's tan completos que tienen.

[@trebushett2079]

The return of the Blackfoot-Sue Indian.

[@gsperanza07]

‘ oh lord ‘ just when you’ve seen it all’ THEY CAN’T EVEN HAVE ENOUGH MONEY TO BUY A CHUCK KEY FOR THE DRILL PRESS !!!!! OMG BUT USE A HAMMER AND A PUNCH TO TIGHTEN THE CHUCK , OH ‘ OMG!!!!!

[@iwantitpaintedblack]

he has a key, but the key seems to not tighten it enough so he hammers on the key handle

[@RubenPerez-ug8jk]

Que inteligentes son y muy hábiles mis respetos para todos ellos.

[@ИбрагимЗанкишиев]

Каждый раз смотрю как блокбастер

[@acesR]

неизвестно кто доживет до конца)

[@ИбрагимЗанкишиев]

@@acesR 😆😂🤣

[@calvanliang3081]

Nghe phúc hát thấy ấm âp quá殺

[@dogman4100]

Utterly fascinating.

[@MrMercurymark]

Apesar das condições Eles trabalham muito bem e sempre sorrindo! Top top! 🇧🇷

[@deividtedionaquarentena5746]

É verdade! Os admiro demais.

[@benjaminsilva1812]

Pra quem acha que é mau remunerado no Brazil, é bom ver esse vídeo! Aí sim trabalham, e com amor pelo que fazem.

[@andreaugusto3851]

Trabalho meio porco, tudo na base do 'olhometro' e ninguém usa bota se segurança.

[@MrMercurymark]

@@andreaugusto3851 Trabalham nas condições que podem, questão de sobrevivência, quando alguém está numa posição que se acha acima tende a menosprezar aquele que entende estar a baixo!!!! Não usam botas por falta de recursos para compra, não por desleixo!!! Vossa fala é rude e desrespeitosa para com eles.

[@dulajohnstone5704]

They all have such beautiful black hair

[@mvicentejau]

Os equipamentos de segurança na fundição são os melhores!!

[@crookedhands7116]

я один вижу что шпильки смотрят в разные стороны? потом покупатель ищет диски R20 110x5(или112x5) но это неточно ))

[@murziks1]

- по месту обработать напильником ! .ну или молотком .

[@tim5-k9l]

Накручиваешь гайку на шпильку и правишь её положение молотком. Чё не пакистанец что ли? )

[@crookedhands7116]

@@tim5-k9l потом шпилька немного проворачивается и ты опять удивляешься что разболтовка не та))

[@zakhu4971]

hello from iraq with you well done

[@patrickw3783]

Greetings from the Netherlands

[@svendsvimmel]

aah. the old 2 kilo hammer.. works on everything from drill chucks to bearings...

[@travelling_stephen]

They are also known as a multi tool, one size does all. Eat your heart out Dewalt.

[@DavidHuber63]

Amazing craftsman, Thank you!

[@FrustratedBaboon]

7:30 did that guy just shake of splashed molten metal off himself? Wholly COW!!!!

[@Hamburg6789]

Các bạn nên đeo kính bảo hộ lao động khi làm việc sẽ tự tin hơn rất nhiều cho sức khoẻ của đôi mắt quý báu 😀💖✨🍀

[@GaryGold]

Well done guys - good job! Take care of yourself!

[@9traktor]

They`ve got work to do. Nice!

[@NikColyerMachineWorks]

great videos, but slow down with rotating the camera you're making me dizzy.

[@darkholyPL]

8:39 Good thing he had his safety flip-flops on.

[@navov7106]

Да там все бессмертные - металл из тигеля в тапках разливают с голыми ногами.Присадки горстями на глаз.Без намёка на вытяжки и СИЗы - лет через 5-10 этот главный металлург горячего цеха лёгкие выплюнет. Я думаю всё они понимают,от бедности и безысходности в таких условиях работают. Хорошо бы нам до такого не докатиться.

[@НашСемейников]

У нас бы экологи всех выеб..ли и высушили за такое производство .

[@СанёкФролов]

@@НашСемейников Ага ага ... ты был на нор никеле ?

[@valdemaar3000]

У них в подсобке еще две упаковки новых людей осталось, так что не страшно))

[@НашСемейников]

@@СанёкФролов На Норникеле другие условия , там хозяин друг плешивого . Наше руководство слишком мелкие вошки чтобы кому то мзду платить .

[@deriter5464]

@@НашСемейников загугли Кладбище кораблей в Читтагонге.

[@michaelb.42112]

"Yup, we're badasses. We work with molten steel ... barefoot."

[@yo.mama100]

Yeah or dumbasses that's also an acceptable statement

[@beer1for2break3fast4]

They can make anything they want except a good pair of work boots.

[@user-ib5mx8ro4k]

Makes you think what is really required for safety…shots, masks, osha?

[@Rusty_Nickle]

@@user-ib5mx8ro4k I blame OSHA for stupid people being alive.

[@mojoro23]

I like the work boots

[@nicolafabris6806]

..Incredible

[@kevinchamberlain7928]

These men have learned the secrets of big corporate industry! Extremely capable men, these are! I hope there's no management parasitizing their wages like they do in the West!

[@Rigge1988]

No PPE and child labor. I think the management take all their wages unlike here in the west. But here's to hoping.

[@a-fl-man640]

if you're going to do repetitious operations, make some tools that take the guesswork of positioning, drill jigs etc. and buy a tapping head. having the right tools pays for itself in the long run both in speed and productivity.

[@fernandoberumen762]

9i

[@anandamallick589]

,,,

[@jayminor9757]

Man power is cheap, tooling is expensive and difficult to obtain. What these folks accomplish with what they have is pretty impressive.

[@tonyloechte9994]

What Near enough was always good enough.

[@stevejones7580]

Like a Chuck key

[@donjeep6800]

i am impressed by the work. you can say all hand made. there is so many bad safety thing like no work books , safety glasses, loose clothing, and a bunch more . the government would shut them down.

[@robertoswalt319]

The sad thing for me is that there is no one there advocating for their safety. Their culture appears to be content with the concept that human safety is not as valuable as the ability to bring home some money for the family's existence.

[@donjeep6800]

@@robertoswalt319 true but the lose of your eyes, hands, legs, feet, will bring no income to there lives. ans i am sure that the company does not care about that

[@fenixag790]

Техника безопасности ни к черту, но кто их там считает ) а так вполне отработанная и эффективная для своего времени технология выпускающая годные изделия для своего назначения . Или кто то думает что ступицу для колеса прицепа в который может быть вообще ишак запряжен надо фрезеровать из титана на станках чпу ....

[@josealvarez9123]

Harnessed to a donkey?

[@otofix7844]

space technology.. amazing.. perfect work safety..

[@HeavyMETALoO6PA6OTKA]

Изобретён новый сплав - сталегун... чугуналь... не фекалеферум! )))

[@nigelparker5886]

I thought flip-flops were bad enough!!!...but seriously....barefoot! What? Different world!

[@davidsicca2352]

Funny to see, not a single calliper or a micrometer is used to fabricate the hubs. Why you need precision instruments if you have a good eye sight!!!

[@Stachel1968]

Work Like the First people

[@Sim2Drift]

This looks like my cnc shop I work at

[@Blacklab99]

I badly want to send that boy a decent chuck and key with some decent drills and taps. That job would be so much easier. I very much admire the skills of these people.

[@adybarker4733]

It might help if he didn't let the tools drop out the chuck and hit the table every time. These guys have zero skill, just parrot fashion, on the job training. They have no understanding of what they're actually trying to achieve.

[@rednwhitecooper]

@@adybarker4733 yep, you nailed it. Zero technical skill or knowledge just repetition.

[@jimfarmer7811]

After watching these videos I wonder if these people are incentivize to make the process as inefficient as possible. By not making improvements they are locking themselves into a life of poverty.

[@niceelectricals5107]

Supper wark

[@random-kc8gx]

It's not gona wobble at all!

[@tilemburngider]

thanks for the video 🙏

[@Mohhitto]

Если будет апокалипсис! Они выживут!

[@Shmayzer]

Нет я всё понимаю, и отливку и токарку всё условно говоря нормально... Но вот сверление... Ну не трудно же научиться свёрла затачивать. Не трудно ведь ключ найти для патрона зачем по нему колотить, зачем создавать лишние люфты? Ещё и рычаг надел на вертушку ну это вообще...

[@ЮрийПятницкий-ш8б]

Так сверло ж не лезет 😂