Mackie Mix8 - Aux send stage monitor mix

For more information regarding our mixers please check out our Knowledgebase documents located at the link below.
supportloudtec...
If you still need help please contact us directly.
Email - [e-mail]
Hours
Monday - Friday 8:00am - 4:00pm PST
Phone - 800-258-6883 ext. 1630
Technical Support
Mackie
www.mackie.com/...

[@barneslawntree4877]

Using this AUX Send for a mix minus setup, I only hear audio out of the left channel when listening to a recording. Is there a way to fix that so people on the live streams are not only hearing me in one ear?

[@alexsevilladj]

I think this kind of aux send is mono

[@matthewkinnard500]

I have the same model but mine is 12 channels and doesn’t have an aux send port is there any other output I can use except for main out and phones?

[@TheoVoidTV]

question. I have a set up where im using digitakt, digitone, microfreak, mic. Am I able to to cue channels in headphones before sending them out to main mix?

[@mackietv]

The Mix Series doesn't have a direct way to Cue to headphones. An alternative would be an 802VLZ4 mixer. This has the ability to use the mute switches to assign a channel to the Alt 3/4 mix. You can switch back and forth between monitoring the Main mix and the Alt 3/4 mix via the Control Room Source Switches. Any channel that is 'Muted' will go to Alt 3/4, and channel that is NOT 'Muted' will go to the main mix. For the most straightforward way, you can use any of our mixers that have 'Solo' switches on the channels.

[@user-tz9hz2iq4m]

Hi, user manual says (p11) "Aux sends are post-fader", so if I turn level knob on channel 1 to minus inf. and aux sned to some value in the middle, and aux master to the U how in this video, will I get any sound throug aux send jack? If so what does that "Aux sends are post-fader" means?

[@PognasMusic]

My exact question, and no answer in 2 years... Help someone?

[@darkmew64]

Post fader means post EQ. It means you're sending the audio signal at the exact level you've set it through aux send when set at unity.

[@AuntieMoMo05]

I just called and spoke with tech support. This video is 100% wrong. This demonstration should be for the pro series Totally useless video for this particular product.

[@gomey70]

It means the signal goes thru the level control (on most mixers, this is a fader not a knob) before going to the aux bus. If the level control (white knob) is at zero you wont get any signal going to the aux bus.

[@luisangelmadrigalporras6538]

Amigo puedes hacer este audio en idioma español gracias bendiciones

[@guille_toledo76]

No sound will come out of the main mix output?????

[@2468DDT]

The mains are for the front of house. Aux's are intended for monitors

[@pssonorizacao]

Gostaria de saber como faço para retirar minhas GR Ralações da dl16

[@arnelramirez1383]

Can I connect amplifier to aux send

[@mackietv]

Yes, you can connect the Aux Send to the Input of an amplifier.

[@jameslucas248]

MackieTV can you use a ts cable with the aux send as well? So is it bal/unbal like some of the other Mackie mixers?

[@AuntieMoMo05]

This video is TOTALLY WRONG!!!!! You HAVE to turn up the main knobs in order to hear anything. Please update this video.

[@2468DDT]

Aux's are a secondary sound source for monitors. It has its own volume control but same EQ. The mains are for the foh, not the aux

[@cubby6708]

@@2468DDThow would you connect a second monitor ?

[@gomey70]

The aux sends are post fader, so yeah you have to turn up the faders (level controls) to hear anything from the aux/fx.

[@KLRCAT]

Completely unhelpful. Is it pre or post fade?

[@2468DDT]

Pre fader

[@gomey70]

@@2468DDTNo, the aux/FX sends are post fader. Page 11 of the manual.