Monitor Connection to The Mackie profx12v2 Audio Mixer Via The AUX ( part 1 of 3 videos )

[@graysonkemp8870]

Very nice explanation and demonstration of how to work with the monitors once they’re plugged in

[@Ramanzify]

Great video. Just getting in small venue set-ups with the FX12 v2 and this will help immensely. Many thanks from NZ.

[@RichardDaniels]

Thank you :) I just couldn't figure out why I couldn't get the mic effects on my monitor at home while I test everything out. Of course it's cause I need the master mic volume up! Taken ages to work that out DOH! So cheers. Rich. Yorkshire, England.

[@lalon_noor]

Clear explanation with appropriate demonstration!! Thank you very much.

[@expertisland]

Thank you, & You are welcome!

[@rjmdrum]

Just the info i needed as i am using Mackie proFX12v3 for a school chorus concert and am using 2 Bose s1 pros for main speakers and need to send a singers out to one monitor for chorus kids. Assuming i need to do that through auxiliary send.. also running music into board as mp3 from ipad. Using an rode m5 condenser pair for overhead miking and one shure sm58 for main speaker … Thnx for posting

[@johnnyblevins3846]

Love Your videos can You do one using the Mackie pro fx 12 on how to hook up IEM monitors for a live situation? Thanks, Johnny

[@keithsawyer9694]

Exactly the info I needed! Thank you!

[@immattbailey]

Thank you for this ! I’ve got wireless IEM and used the mon send out hoping it was the same as aux because every other mixer set always says aux!

[@etechvideo8456]

Great Video thank you. Question: on certain mixers there is a solo button that enables you through your headphones to preview a channel before you send it live, does the Makie Profx12 has this capability?

[@davidlewis123]

Since there is one aux output, can you still plug up multiple monitors or only one?

[@steelblue1959]

My thought, too. And if yes, where do you plug them?

[@normandlabrecque4039]

Does this get answered anywhere? Who only uses 1 monitor?

[@uhoh007]

Why is Mon Send Mono? I get that most stage monitors are single speakers but in studio my monitors are stereo. It would nice to be able to go either way with Mackie fx

[@bevanocottone]

Super helpful! Thank you so much!

[@nelsonmachado9152]

Much appreciated! Cheers!

[@danoneyal]

Excellent video, explains very well. Is the monitor output a mono or stereo output?

[@Chancellor_Artist]

How would you hook it up for studio? The ProFX30 has control room not Mon Send and behind it has 2 more outputs

[@GtrMan863]

Do i need to use 1/4 balanced cables for the aux sends to my monitors?

[@marc6344]

Think both works, it says Bal/Unbalanced on the outputs.

[@Jeremy_Sims]

Question: Is it possible to use the fx slot as another aux send possibly? Maybe be dialing the fx on the mixer if I can and then it should be able to be another aux send technically right?

[@sinkwcali]

Good video, thanks for all the detail! wish people would give you more likes, given you have 7k views.

[@joeydillard3430]

So only 1 monitor can be used with this mixer???

[@thezogs95]

Does the monitor out sum everything into mono?

[@mastersoundlive]

Thanks. I have the Pro FX12. I don’t think I can but can I have two monitors with separate volume controls for stage? Vocal wants to hear himself more but bass player doesn’t want vocals.

[@expertisland]

If your not using the fx you could us the fx send as a second monitor

[@Charles-ui4rx]

OK What Cable should be used? XLR TRS or TS coming from the (AUX SEND) ?

[@Randall-A-Yates]

Where can I purchase one of those mixer Table-Top stands?

[@paulyghizzo]

i would like to know where to get that stand for that mackie fx12 v2

[@zarleymcalpine3131]

I'm a drummer,and want to use monitor/Aux for in ear (left ear)in my profx8 v2, to hear 3 vocals channels I have bass drum in first guitar channel, and want to close this off,would that be possible plugging mono jack into monitor/Aux channel then headphones into that,then closing off the green dial on first bass drum channel?thanks.

[@jefferydegraffenreid7472]

I'm a drummer to I have a pro fx12v2 mixer

[@praneethdhanushka207]

Dear Sir, I want to know how can I use Stage Snake Cable???? And from where to where it is going on stage? Please explain briefly!

[@RajuPatel-te7wg]

Very good

[@STARMOYOPRO123]

Can you do the REVIEW ON ALTO PROFESSIONAL ZMX 244 FX USB 🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏 Thank you

[@andreaskurn]

Can anyone tell me how to send the effect to AUX of this mackie pro mixer? The effect is doing good for the main out, but the aux doesn't deliver the effects.

[@jenbel1157]

Can we use these 5" monitors for small worship?

[@expertisland]

No you're going to need PA speakers.

[@agesonjohanesburg2915]

Thanks. You dont say what kind of cables you use to make monitor work. Also, what cables you used to make the channel play music etc. I think i know but would be more helpful. Thank you

[@pradeep.d9887]

👍Pradeep.D🔊🔊🔊🔊🎵

[@pradeep.d9887]

👍Pradeep.D🔊🎵

[@BallooII]

Can I use a passive speaker as a monitor

[@expertisland]

You can if you have an Amp for the speaker.

[@66blades66]

@@expertisland I have an amp and two passive monitors: how I have to connect them to the Mackie Profx12? When I connect the aux input of the amp to the monitor aux to the mixer the result is a mono channel, how can I use the monitor aux for the stereo signal? Thanks

[@tonyarky7868]

Thank you thank you!!!!

[@frankfarago2825]

So sorry, but I didn't understand anything here. You move the knob and the sliders, what is supposed to happen?

[@pradeep.d9887]

👍🔊

[@2367J]

Having trouble sending USB audio through to the monitors!

[@pradeep.d9887]

👍Pradeep.D🔊🔊🔊🔊🎵

[@pradeep.d9887]

👍🎵