Mackie ProFX10v3 Audio Mixing Console | Setup & Review

In this video we show you how to setup the Mackie ProFX10v3 with the most common inputs/functionality that most users want to know about. We have specific videos about this mixer for live streaming setups, live sound, how to setup a mix minus, and other requested topics.
PLAYLIST FOR MACKIE PROFX10v3:
► • Mackie ProFX10v3
PRICING & SPECS FOR EQUIPMENT IN THIS VIDEO:
► Mackie ProFX10v3 Audio Mixing Console: currentprice.io/profx10v3
► Shure SM58 Microphone: currentprice.io/shure_sm58
► AKG C30-0B Condenser Microphone: currentprice.io/akg_c3000
► 1/8" to dual 1/4" Jack: currentprice.io/14_to_dual_18
► Apple Headphone To Lightning Adapter: currentprice.io/lightning_18in
► USB 2.0 to USB-C Cable: currentprice.io/usbc_usbb
► XLR Cable: currentprice.io/xlr_cable
► TRS Cable: currentprice.io/trs_cable
These are affiliate links and I may earn a commission from Amazon (and others) on qualifying purchases.
XLR CABLE BUYER's GUIDE: kettnercreative.com/buyers-gu...
PODCAST BUYER'S GUIDE: kettnercreative.com/buyers-gu...
LIVE STREAMING BUYER'S GUIDE: kettnercreative.com/buyers-gu...
MUSIC PRODUCTION BUYER's GUIDE: kettnercreative.com/buyers-gu...
CHAPTERS:
0:00 - Introduction
0:39 - Pricing & Specs
1:00 - Rear Of The Mixer
1:30 - Connect USB To Computer
2:00 - Stereo Outputs
2:19 - Resetting / Zero The Mixer
2:50 - Main Output Level
3:40 - Mute Buttons
4:30 - Studio Monitors & Headphones
5:10 - Microphone Inputs
5:53 - Insert (For Outboard Effects)
6:35 - Low Pass
6:44 - Input Gain Setup
8:08 - One Knob Compressor
9:05 - Low Cut
9:16 - 3 Band EQ
10:25 - FX Send & Effects Engine
11:04 - Panning
11:21 - Condenser Microphones
12:35 - Line Level Inputs
13:42 - USB Inputs
15:20 - Final Thoughts
VIDEOS FILMED WITH:
Camera: currentprice.io/sony_a7iii
Lens: currentprice.io/sigma_24_70
Microphone: currentprice.io/sony_lav
Studio Monitors: currentprice.io/hs5_monitor
Video Recorder: currentprice.io/ninja_v
Video Switcher For Live Stream: currentprice.io/atem_minipro
Key Light: currentprice.io/keylight
Fill Light: currentprice.io/keylight_air
Uplight: currentprice.io/astera_ax5
Truss: currentprice.io/truss_black
Editing Computer: currentprice.io/mac_mini
Editing Monitor: currentprice.io/lg_32in_4k
WE OPTIMIZE OUR KZbin CHANNEL WITH:
Tubebuddy: geni.us/Md6v
VidIQ: geni.us/dqUyD
Riverside FM Podcast Software: currentprice.io/riversidefm
GeniusLink: geni.us/vss0P
Website: kettnercreative.com
Instagram: / kettnercreative
Facebook: / kettnercreative
Threads: www.threads.net/@kettnercreative
Disclosure: If you purchase an item or service from an outbound link, we may receive a referral fee, which helps to support Kettner Creative.
All information is provided using our experience and research to the best of our ability. Links, videos, and other content are shared for information and discussion only.
Copyright: 2024 Kettner Creative Inc., All Rights Reserved.

[@kettnercreative]

We'd love to see a photo of your setup! Tag @kettnercreative on KZbin, TikTok, Instagram, Twitter, Facebook, etc..

[@gotonkar]

I bought a 6v3 today for simple desktop stuff and am wrapping my head around the blend and usb returns, as well as getting used to the pre-main-fader control usage for USB out. So I really appreciate the various videos you have for the ProFx line. Your production quality, expertise, and detail are easily worth the 'subscribe'.

[@MrTitusDenis]

Hi, your video presentations are impeccable and really helpful to make a decision to buy this mixer and also for reference on it is brought. As these mixers seem complicated for beginners, and help from an experienced hand such as yourself does have an impact. Most people, though, could afford such mixers don’t usually go for it, because they can’t fully understand the functions. And your videos make it clear. Thanks!

[@rogerbaird901]

Excellent and well presented video! I'm just waiting for my board to arrive and after reading countless negative comments about the lack of instructions I searched and found your video. Glad I did as it will save me countless hours of frustration and muddling around.

[@PeteDavies728]

I've spent the last 4 weeks thinking that I was going to buy the Yamaha MG10XUF, then tonight I found your videos on this beast, and now I've changed my mind completely. This is now the mixer I'm wanting, so thanks for helping with my dilemma. Superb videos by the way.

[@chuckbrock6794]

i bought the Yamaha and took it back lol!! didn't care for the sound at all

[@pahaho5197]

The yahmaha is so ass don’t even waste your time or money on it

[@lisafalls1527]

Excellent video! I appreciate how thorough and knowledgeable you are about the product. Just purchased the FX10 and I can assure you as a new user trying to navigate the setup this video was perfection! I just subscribed and will definitely be checking out more videos. Thank you.

[@jeffclark2293]

Just purchased one of these to use at an athletic venue with public address and music requirements from multiple sources. Your video was very helpful, for this mixer and in general. Thank you.

[@djgermain]

Brother, best explanation of this mixer on the entire web. Mackie should thank you... I thank you!

[@donnalogan]

Your videos are so well done. I appreciate your excellent teaching style, which seems to cater to newer users like me. Subbed👍🏼

[@kettnercreative]

Welcome aboard!

[@Wasaia]

I agree! New sub here as well.

[@jasonstallworth]

Dude, thank you for this video. I’ve been using this board for our live acoustic gigs but haven’t really dig into the features.

[@shameer685]

You explained this so much clearer than every other review I’ve seen on this mixer.

[@kettnercreative]

Glad you found it helpful!

[@jadenwracing8176]

@Josiah Clyde @Thomas Paxton wow you're an idiot. These accounts were made on the same day lmao, DONT BE FOOLED EVERYONE!!!

[@dorislb5334]

@@kettnercreative MACKIE PROFX10V3 I cannot make the phone working whitought the live sound , I just want the headphone working tanks - 2 days new

[@thefeet]

That is a great little mixer. Thank you for taking the time to feature this piece if gear! Been looking at the newer VLZ4 series in 2024 but , meh, im SOLD on this one. There's just something about the layout here i like! tyvm!

[@daviddiehl8523]

Okay, you've got me started on the right track, ( no pun intended), so off I go! Great video. You present the info in a clear, concise way making everything easy to understand alongside my printed documentation that I downloaded from Mackie. Thank you for including the links also! As I watch more of your videos and find that they continue to assist me, I'll gladly join the group at your more than reasonable rates! I've got all the instruments that I play,,,,, guitars, drums (acoustic & electronic), & piano/keyboard,..and the equipment,..amps, Mics, MackieProFx10 Mixer, cables, an 1800W PA and 3000W Alesis Strike 8, and even a 8ch DI box, (just in case). My biggest concern now is which DAW to use??!! I've got Cubase/WavePad loaded on a Dell that I've learned will handle an audio DAW setup. Hopefully now, your videos will get me going in the right direction to getting my music recorded correctly. I know I've got a long way to go and a lot of trial & error and that's what I'm striving to reduce!

[@nathanwarwick9680]

Your style of explanation is great. Super informative and easy to watch. Thanks for the info

[@kettnercreative]

Glad it was helpful!

[@alfonsovillasenor1805]

Love your style, Jordan. Very informative and easy to follow, especially for a rank amateur like me. Keep up the great work !!

[@pauldritsas6047]

Thank you so much for explaining a mixer setup in simplicity. Jordon you rock bro thank you again.

[@Sanderson890]

I find your videos super helpful, you say everything clearly, you show everything and you do it slowly in a way that even those who are completely new doesn't feel lost (I once watched a guy explayning mixer setup and he moved so fast - cable here, another there, turn this up, this down - that I didn't get anything from it). Your content is really top quality and you just earned a new sub. Keep up the great work.

[@kettnercreative]

Thank you very much. I really appreciate your comment.

[@Revned]

Excellent channel thank you for all the videos. Very clear and answer all my questions!

[@johnsguitarmusicanddemos]

I just ordered mine and I’m sure there’s going to be a learning curve to it but thanks for your videos, I feel like it’s not going to take very long.

[@mikepernicano503]

In detail video, much appreciated. I have the 12 channel V3 However, controls and such are the same just two more channels. Great video!!!

[@BruceBannerEVENHIGHER-kb3ko]

Another great video - love your channel I have the 12x3 and am loving it for live music online

[@kettnercreative]

That's awesome

[@Trai1b1aze]

Thanks for these videos. As someone not that familiar with mixer setups, these videos have been the best ones I have seen in terms of quality demonstration and explanation (after hours of searching and watching other videos on the internet). Have been trying to get a 2 PC streaming setup going and while I have the video feed sorted, the audio setup has been giving me problems (specifically getting game and mic sound from gaming PC to the streaming PC/OBS). Seems that a hardware mixer might be the best way to go without diving into the complications of a software solution like Voicemeter Banana. I was looking at getting the Yamaha MG10XU but your videos on the Mackie ProFX10v3 have convinced me that it might be a better option.Your other video (Yamaha MG10XU Streaming setup) showed that running a cable from the headphone out port on the gaming PC to 2x 1/4 ports in the mixer was the best way to capture the gaming PC sound (before sending it on to the streaming PC/OBS via usb). Am assuming most of the info in that video for the Yamaha mixer can be reused in setting up the Mackie mixer? Lastly, am just wondering what you think is the best way to set up microphone/s for a 2 PC streaming setup using the Mackie? (wanting the option to talk to team mates via Discord and talk separately to the stream if needed - have a range of microphone input options from gaming headsets to an ATR-2100x that does usb or xlr). Appreciate any advice you can give and thanks again for the great content.

[@kettnercreative]

Hi There, Yes, a streaming video using the Mackie is coming as well. There are a couple very distinct differences with how the blend knob/usb inputs are setup - but everything else is very similar. I'll keep this comment as a reference for when we create the Mackie version of the streaming video to try and address some of your questions.

[@Trai1b1aze]

@@kettnercreative Thanks, appreciate your work. Looking forward to the video.

[@djmarioentertainmentcomun7689]

gracias por las clases que das demasiado interesantes y muy entendibles bendiciones

[@poptoopera1075]

Very helpful video, nicely explained.

[@jaysonmhalikasantos]

i just bought mackieprofx10v3 i will follow your instruction and i hope i will be succesful to get the sounds i like as i am struggling for 2 days now seting it up now i will do the instruction

[@user-oz8uh4hs3d]

Thank you so much for this tutorial. Really helpful!

[@whollenbeck8]

I love this mixer so much. Thank you sir!

[@HUMZMIC1]

Awesome video and thanks for explaining that was very educational!!!

[@michaelbeattymusic1]

Thanks Man just ordered one......Appreciate your details

[@miguelgarcia-js1rh]

your video is so well done. I appreciate your excellent explanation tanks

[@jwiggs5011]

Now this is how you break something down! 👍🏾👍🏾

[@lasttwhisper]

thanks for the video buddy. i wrote that i was going with the yamaha but i went with this one because of the mute buttons and the yamaha vs mackie vs beighner video. so i went with this one on top of that the yamamha was sold out on amazon. :D so i came back here worried my mic was not working but that 48v Button the red light indictor , i didnt pressed. i pressed it and now its working :D thanks bro. also those that got this audio interface and it isnt showing up in your WINDOWS 10 drivers or your computer using the usb connection .. you have to download their DRIVERS and then it will show up on your obs studio.

[@MrDingUntalan]

I think I know what to get now since I watch this great video thanks so much sir I will go with the mackie pro. thanks

[@AnilKumar-zo2eu]

Thank you sir for your packaged information

[@NhanNguyen-qd3lb]

Thank you very much. I was just going to return my brand new Mackie until I see this video. Thank you

[@kettnercreative]

Glad I could help!

[@Lukas-oy1rj]

Excellent Video! Really helped in the understanding of the Mackie. I would love to see a video for the FX6v3, as an entry level console. Also - In my setup I have to crank the Gain almost all the way up to get any input from the mic. Do you have any suggestions here? I followed the video but no luck so far :(

[@mastersoundlive]

Thanks for the video. I’ve had the Pro FX12 for years and just got the Pro FX22v3. What I didn’t realize was that there’s no graphic equalizer sliders on the v3. I’m used to that on the old version and wondering if there’s no need or if I should tie in an equalizer. Old school here and like to really tune my live sound. Thanks!

[@Raidaikin]

You convinced me to swap out my Yamaha MX for this 😁

[@kettnercreative]

It's a pretty sweet mixer. Some nice upgrades/features for sure.

[@frubo_ssg]

Great review - thanks a lot!

[@kettnercreative]

Glad it was helpful!

[@1matzeplayer1]

Amazing Review!

[@kusholhumedeo7851]

Helpful video thank you.

[@jasongunn9961]

I just purchased the 10V3. Thanks for taking time to create such a clear and informative video! Many of us are hobbyists or new to audio and its such a great help having resources like these that you post that are easily understood and fun to watch.

[@sanjeevloomba3340]

Great explanation Jordan. I just bought one with a Focusrite Interface to connect with my Macbook but it seems from your video this additional interface is not needed am I right? Or can it help? Thanks

[@lesliejamesmcauley-dj8sg]

Thank you Jordon for all of your help.Are you Canadien too- Brookville,Ontario. A quick note: Today I spent almost 4 hours employing my Senses in trying to figure out what method or type of connection provides the BEST Stereo connection for the Cell Phone? I get to use a fancy word: EMPIRICAL. My analysis was definitely Emperical.The Winner: The Top right 'LINE IN 9/10 JACK' on the Pro FX 10v3.I promise you Im being honest.I tried multiple other connection possibilities.Fact- its not even close.The ISOPOD LINE LEVEL SUMMING BALANCER is,to be blunt...terrible(D rating).I tried the Behringer Ultra-Di D120 (Link) approach(C Rating)...I tried the 5/6 Pairing Approach(B Rating)....here are 2 best- coming in at 2nd place is the Bluetooth Stereo on my Pyle 4ch mixer(A rating)....but the Heavyweight champ is,with an A+ Rating the LIne In 9/10 with just the 1/8 connecting to mixer and Male USB C CONNECTING TO PHONE.

[@lesliejamesmcauley-dj8sg]

I think I just discovered the #1 Law in Audio Recording: it's not what he says or she says with all the Hyperbole. IT'S WHAT THE MANUAL SAYS!

[@hebrewuser]

Really helpful video. I have a 2007 Macbook --- can I safely assume that for recording purposes, the USB ports on my Mac will not be outdated for this mixer? I am currently using RCA to 1/8 TRS from my VLZ4 into my 1/8 input to my Macbook. Once plugged in, will the input choice automatically show up in my Sound settings window?

[@alphonz31]

Hi, thank you very much for your great videos! Are there any original Mackie-Asio-drivers? And if yes: how is the latency for example compared to a Focusrite audio interface? Thanks for some infomations...

[@chrisashworth7089]

Excellent demo....thanks. Just a couple of questions. How do the Mackie mic preamps compare to those on the Yamaha MG10XU?.....and have you done a vid on using the Mackie to multitrack with the Pro Tools software? Thanks again....I'm about to move from away from my Yamaha AW1600...

[@linhvunguyen3121]

I have this mixer and The video is really helpful (especially abt input set up) . Could you plz do a video abt how to set up for output to the speakers (including monitor speakers) for sound quality. Thanks

[@crm4742]

Awesome video! I’m using it to setup our mics for live streaming. One question? How do I monitor the live stream audio? If I add the USB 3/4 into the mixer the live stream video music comes through the main church speakers which is not desirable when the stream is running a countdown timer video for example? Thanks!

[@JT-of8gy]

Thank you so much for this video. I just bought this unit for my practice sessions mostly which I will be connecting my mic and keyboard to directly. I know this is a non powered mixer. In the event I want to connect my passive speakers, what is the cheapest solution for an amp to use to drive the passive speakers. Thank you for your time.

[@kettnercreative]

There are a lot of variables for combining the correct amp to the correct speaker and unfortunately we don't offer consulting on this type of thing. We recommend simply to purchase a powered speaker.

[@Goavagatore]

Very useful and well made video, thank you!!! why there is no left & right marking on channel 3 line inputs for stereo separation ? Does it mean it takes only one of those line inputs at a time ?

[@user-wf9wq9kq6u]

Thanks for the lovely and detailed review. Do you know if it’s possible to use it with an ipad daw and playback from the ipad to the main speakers whilst also recording into the ipad? thanks!

[@javierlagos5968]

Yo la compré y me ha gustado, que software puedo usar ?

[@AnilKumar-zo2eu]

Thank you so much sir for your packaged information . Sir where we will get the usb 1&2 fader control in this mixer.

[@djmickeyTV]

The one knob compression. When adjusted I'm not hearing much of a difference. Not sure if it's because the usb recording is not really affected or because it acts more like a limiter. There were areas where you spoke softer and the compression to me didn't really level off your voice. Can you advise on this? I'm really considering this mixer. Loving the mute buttons and control room volume but I need compression as well. Thanks

[@davegrg123]

Thanks for the video. So could I use the FX send to go to an outboard FX unit like a regular aux? Then just return to a stereo channel? Cheers

[@devianttimes483]

I bought the Mackie ProDX10v3 for my 2 pc Twitch Live stream setup (mostly to get away from voicemeeter) I know its probably a big ask but if you could do and in depth "how to setup 2 pc's with Mackie" I know myself and I'm sure a good bit of other ppl might find it very helpful. how to route the 2 pc's for alerts, game, music, discord and such. Either way, I love your videos and find them super useful. Liked and subbed! Cheers!

[@2hands4u]

Thank you for this video it helped me understand this mixer. Question: I'm using this mixer to lay down one track at a time of brass instruments (quartets,etc). I am not set up to record to computer and I will be using a Tascam 2488/neo for recording. Can I take the xlr outputs and connect them directly to Tascam inputs? Any other recommendations are welcomed.

[@kettnercreative]

You can do that, or you can use the USB output of the mixer.

[@ductran8128]

Thank you so much for the review. Could you please help to give more detail in the "insert"? For example, can I use it to hook up to an external EQ? if yes, could you please help to guide me the detail of how I can do it (in term of input/output to my EQ)? Thank you so much.

[@gentlemood]

Thanks for this video. I just got the Rockville ROCKMIX 10FX 10 Chan Mixer. The BT is a nice feature on there. But can it even compete with the Mackie ProFX10v3. Let me know what you think. I plan to return it sooner than later. I like how you explain things on this video. Thanks

[@garymask82]

have you managed to compare the Allen & heath zedi-10fx with the Mackie?

[@dr.sadiruldeensami1991]

Hello, Mr. Jordan does the mute button impact the USB output?

[@MrTitusDenis]

Just one question 🙋🏾‍♂️, when you switch on the 48v for the compressor microphone on input 2, will it not also affect the dynamic on input 1?

[@petercampion2758]

I have this Mackie Profx10v3 but im having a problem sending out my track audio into my streaming device. The viewers on my stream can hear my microphone but they cant hear the music which is coming from my PC/tablet and sent to the mixer. I would really appreciate if you will be able to help me figure out. Thank a lot

[@mikejoseph23]

I guess my main disconnect is what is the difference between USB 1/2 and USB 3/4 and how can I leverage the two? I have the mixer hooked up to my iMac and anything I play with only seems to impact the USB 1/2 channel. Toggling the Line in 9/10 and USB 3/4 button doesn't seem to have any impact for me. What conceptually am I missing? Thank you!

[@mariawood5784]

Another nice clear video. Thanks. So is there a master control to turn down/off the usb output to a computer?

[@kettnercreative]

Not on this particular mixer.

[@luckyguy313]

Hi...your videos are very clear and informative....nicely explained with minor details...i have connected this mixer to my samsung A34 but its not working...seems it does not recognize the mixer. I have tried recording with other apps but it was in vain...any idea how to make it work. Thanks

[@RsqSqr]

Can I select different effect for different inputs, together in a mix. Or only it serves one channel. Also how it is compared to onyx 8. Thankyou for detail explanation.

[@frankybla]

Great video, thanks. I've a ProFx12 but i assume you didn't explain the difference between the two jack's that are on input 3 and input 4 (LINE IN 3 & LINE IN 4). Is it possible to explain the difference between these tow jacks? Thanks.

[@bhajansonguitar335]

Thank you so much for the video. Your videos are in fact so nicely structured, really appreciate. I have question: if I'm sending the USB input (a background music) along with the microphone (some yoga instruction) back to the USB... Doesn't that lead to a loop? This is a situation when I'm conducting online yoga classes.

[@Upstatenate518]

You have to use 1/2, disable 3/4 and the loop will be gone :).

[@MarinaUganda]

One newbie question: Is it possible to use the laptop's mic line in to route in the mix out of the mixer (without an external audio interface)?

[@mrjefflive]

I have the ProFX12v3 and I have a little difference I noticed in setting mine up. The "Blend" knob needs to be all the way to "Input" to get the true reading [on the "Main Meters"] of what I am sending to the PC.

[@kettnercreative]

Interesting, thanks for the comment. I'll look into this further.

[@bhargavsundaram]

The intro was awesome. There wasnt a section on how we go live. Is there a video explaining this??

[@freddyroy339]

Is it possible to add FX via USB on top of the inbuilt FX to the mixer channels and stream it through the main mix? Or does the USB just support recording and unprocessed (plain audio from the mixer) audio monitoring?

[@masoodjamily]

Can you tell me what is the perfect powered speakers for this unit for a party of like 100 to 150 people

[@denisthibouthot4448]

Thanks for doing those videos, it’s great. My recording problem with the Mackie ProFX10V3: I use a click track but, it leaks through the track I’m recording, even if the mic is muted. Any thoughts. I used the Pro Tool One that is now discontinued with no tech support but, I currently use Nuendo and the same problem occurs. Thanks

[@frjr7402]

Does the 3.5mm aux port have mix/minus to make and record phone calls using a TRRS cord?

[@kevinwatts701]

Question… does pushing the phantom power button on this mixer send power to both mic jacks? Would that damage your dynamic mic in jack 1?

[@ughleegamer5598]

Dig the vid, thank you.

[@kettnercreative]

You’re welcome!

[@jeorgemolato5433]

HI. I have my allen and heath zedi 10fx. How to remove electric ground or shock?

[@joaquinduran5662]

HI! Do you recommend this mixer or the profx12v3 for live looping with ableton? Thanks very much for the review!

[@navypti]

Hey Jordan. Where can you plug in a foldback stage monitor on this board? Thanks.

[@austinbain4932]

I have 2 synths would the effects work with them as well ?

[@alantty]

Hi, would you know if a RODE Wireless Go mic would work on this mixer? Thank you.

[@lavendertuesday]

This. was. amazing. Thank you! I do have a question -- can you pair a phantom power condenser mic with a dynamic mic? Does it matter that there isn't a phantom power for specific channels? Thanks!

[@kettnercreative]

You definitely can. The vast majority of Dynamic Mics will not be effected at all. A very small minority of dynamic mics (unbalanced dynamic mics) will have obvious issues (buzzing) but are unlikely to be damaged by phantom power. Ribbon mics are the ones that have a very low tolerance for phantom power.

[@MarinaUganda]

One newbie question: Is it possible to use the laptop's mic line in to route in the mix out of the mixer (without an external audio interface)?

[@yencidvargas1267]

I have a question , I have a Sterling ST159 connected to my profxv10 just like I saw on your video , I turn the 48v but I can’t hear it on the Mac pro book speakers , what I’m doing wrong ? Help please .

[@ant_jello]

Hi, is it possible to use different FX on each channel?

[@youssefselkani]

Great review, can you please tell me how many digitals outputs it can send to my DAW? Thanks!

[@kettnercreative]

2

[@heliotavares8501]

Hi what is the way to connect this mixer to pioneer ddj 1000 ?

[@ThinkShift]

Hi Jordan, another amazing video, thank-you. Just wondering: can I use the Line IN 9/10 1/8" jack to connect my Android phone to feed Spotify music? In your video, you used the 5/6 1/4" line inputs to run your phone music in, but I'd like to use 9/10 instead. Would this work? Thanks again and keep well.

[@bizzihead4631]

Hi Lorne, I'm new to the Mackie mixers however you can connect your phone via the 1/8" jack as I have done for backing tracks.

[@georggvideos]

thank you!!!

[@ericzohar1345]

Thank you Can you control the level (intensity) of effect on this 10 channel ? (Not the volume of effect) Thank you

[@kaede_jing]

How do we connect lavalier mic to mixer?

[@Wesleyrodrigueswes]

When you plug that Mackie on the computer all the channels of the mixer becomes one single channel?

[@KenaYoseph]

How do i connect to dslr camera to record while singing

[@GKallay]

I have this mixer and am trying to figure out where I should place the microphone with a grand piano. Do you any videos that might pertain to this?

[@finertouch]

Thanks for this video. When you engage Phantom power, does it assign to a specific line? How do you control where it is applied? Won't it hurt lines that have other thing plugged in if they do no accept phantom power? Thanks.

[@kettnercreative]

It goes to all lines at the same time. It will not hurt any modern dynamic microphone. Your only risk is if you're using a Ribbon microphone which is extremely unlikely.

[@bokbogs17vlog83]

Hi can i know how to connect simple mixer to speaker usi aux thanks

[@SacredHeart808]

I have a question connecting that same mixer to a Bose L1 Pro32. I looked online if I should use mixer XLR out L/R to bose input XLR or TRS. The L1 is mono so I’m not sure if it matter where my out should go left or right of the mixer and should I put the pan to L or R or middle? I’m very new to analog mixer. Thanks.

[@OurWorldinChaos]

so does it connect straight up to your daw as an interface or is usb just for playing music kinda thing