DJI Digital FPV Common Questions Answered & My Build Overview

  Рет қаралды 14,175

Mads Tech

Mads Tech

Күн бұрын

Пікірлер: 78
@MadRC
@MadRC 5 жыл бұрын
Hi Everyone, I hope the info in this video has been helpful to you, I would really appreciate it if you would subscribe to the channel. If you would also like to support me in what I do below is link to the DJI Digital FPV System on the DJI Store, this is an affiliate link and by using this you are helping me continue to run my channel and keep making videos like this. @t Thank you for watching and as I said please do Subscribe, Like and Share :) I have released an FCC hack for this, see my other video here @EEyY I also just want to confirm some things on this I did not go into detail on in the video around CE and FCC Modes. The System Range DJI State upto 4km in FCC Mode and 0.7km in CE Mode, Region setting is not user selectable and is set by DJI Assistant for FPV Series automatically when you connect the system, your location is detected based on your internet connection location. Can I change from FCC to CE after its been set ? Yes, If you move to a FCC location from CE simply turn on your Goggles and Air unit and allow them to connect and display video, connect the Air unit to DJI Assistant for FPV Series and it will detect if your internet connection location is in a FCC Country and it will change to FCC Mode automatically. How can I tell if I am in FCC or CE ? FCC Mode has 8 Available channels, CE Mode has 4. Can I use the new DJI FPV Goggles with DJI Drones ? No, the new goggles are only designed to be used with the new FPV Air System only. Can I Use DJI FPV Goggles with Analog ? Yes however there is no analog receiver in the goggles and you would have to connect to an external receiver to the goggles via AV in. Can I use my own RC with the DJI FPV System ? Yes you can use your own receiver and transmitter as long as they are on different frequency’s. Can I manually switch between Mode 1 and Mode 2 on my DJI FPV Remote Controller? Yes. However, it is not recommended. By detaching the remote controller and manually switching between Mode 1 and Mode 2, you will not be covered by DJI official warranty if the remote controller were to break.DJI offer two flight modes for you to choose from when purchasing the DJI FPV Remote Controller, Mode 1 and Mode 2. Is the DJI FPV Air Unit compatible with third-party cameras? No, Only the DJI FPV Camera is compatible with the system. What Flight controllers are compatible with the DJI FPV System ? Any controllers that supports SBus and UART with MSP on Betaflight, to use the new DJI HDL 7ms RC connection you need Betaflight 4.1.0 for HDL and telemetry via the MSP Protocol.
@DC-ti3ci
@DC-ti3ci 5 жыл бұрын
There's the Holybro F7 HDV flight controller that outputs 10v or 8v and the T-Motor F4 ... both made specially for the DJI HD FPV system. If I'm not wrong there's aother but can't rem which at the moment.
@paulsharp5473
@paulsharp5473 5 жыл бұрын
What’s with the hand?
@MadRC
@MadRC 5 жыл бұрын
I cant help it its attached to my body, I have a solution however I waiting for a new handle .
@jthepickle7
@jthepickle7 4 жыл бұрын
Sifm lahvoage sigm langigue Sign language.
@desertmtb5028
@desertmtb5028 5 жыл бұрын
Late coming in here. But I like your idea of the gps. I just pulled the trigger on a combo, so Ive been watching videos related to this subject to get ideas on my build. I might use thesame frame you used here too btw.
@Andre_larsen
@Andre_larsen 5 жыл бұрын
nice video! bought my DJI FPV system yesterday. And i am from Norway :)
@raykreisel
@raykreisel 5 жыл бұрын
Thanks for the great video. I am trying to fit the DJI system into the same frame. Can you please tell me how you did the camera mount?
@mattarnold8369
@mattarnold8369 4 жыл бұрын
Hi how did you center the camera in the end? Thanks
@caribbeanfpv2560
@caribbeanfpv2560 5 жыл бұрын
your reviews are EXCELLENT !!!! I have been flying DJI everyday for four weeks. WOW !! FYI everyday new frames and stacks etc are coming out for DJI system. Check out Holybro and Newbeedrone both have flt cont/esc stacks that plug /play into air unit no soldering !!!!
@MadRC
@MadRC 5 жыл бұрын
Thanks for the fantastic feedback. On frames it’s incredible the numbers coming right now.
@ashriches99
@ashriches99 4 жыл бұрын
Is it possible to use the fpv system with my Mavic 2 pro with smart controller?
@DucTaZenSurfer
@DucTaZenSurfer 4 жыл бұрын
Is this a good set up for a Long Range drone?
@ramonskepweng333
@ramonskepweng333 5 жыл бұрын
Can you use dji pro transmitter To that fpv
@MadRC
@MadRC 5 жыл бұрын
Do you mean the Mavic RC ? basically no only the specific DJI FPV RC works with the System.
@ludsat1
@ludsat1 4 жыл бұрын
can you send me a link to the gps addon you use ? and have you tested it?
@Branson.Bowler
@Branson.Bowler 5 жыл бұрын
What antennas have given the best results for range?
@ScottyLovey
@ScottyLovey 4 жыл бұрын
I understand you can use other transmitters but do you need to instal another receiver if not using the dji transmitter?
@MadRC
@MadRC 4 жыл бұрын
Yes
@checkeredflagfilms
@checkeredflagfilms 5 жыл бұрын
thanks for the informative clip. Is it possible to tap into the headset and output to a stand-alone monitor? How can that be accomplished and what monitor(s) might be compatible? Do you think DJI will come along with a firmware update to use the USB-C port to output a digital signal? Thanks...great channel!
@steimy
@steimy 5 жыл бұрын
Great video and nice solution to make use of the chameleon frame. How is your back end 3D print holding up during crashes? Have you designed or found a print for the camera mount?
@supyandani
@supyandani 3 жыл бұрын
I bought Goggles V2 and Caddex DJI Air Unit, I have activated it but when I try to connect according to this tutorial, I still can't connect the DJI Air Unit to Goggles V2, and the light on the DJI Air Unit is still red and won't connect, is there any other solution?
@MadRC
@MadRC 3 жыл бұрын
You will need to activate everything via Assistant 2 for FPV before you can use use
@hobbychanel5798
@hobbychanel5798 5 жыл бұрын
GOOD fpv
@Hellmuthsilva
@Hellmuthsilva 5 жыл бұрын
What motors are you using it? Size
@Blood005
@Blood005 5 жыл бұрын
Can you fly it and record/upload video footage?
@aerialartistry8899
@aerialartistry8899 5 жыл бұрын
Please help me out here with an answer to this question, I have a Taranis X9D+ with M9 Hall Sensor Gimbals & TBS crossfire and love the smoothness & range, but also want the best over all control link from DJI wit the complete package for FPV and DJI fpv controller for 100% single digital control link, so should I spend the money on the DJI controller or pass since I have the X9D+, .... Pro's & COn's..thank u
@MadRC
@MadRC 5 жыл бұрын
If you have crossfire I would stick with that for the best possible range or RC, the DJI remote is a great option for guys wanting to go all in but as your already well setup I would stay with that and just use DJI for video.
@RubensGalleraniFilho
@RubensGalleraniFilho 5 жыл бұрын
No fcc dji goggles racing edition?
@MadRC
@MadRC 5 жыл бұрын
I have been trying on this and still digging.
@RubensGalleraniFilho
@RubensGalleraniFilho 5 жыл бұрын
Hope you get us some good fcc stuff soon. Thanks on your effort.
@Hohmies86
@Hohmies86 5 жыл бұрын
I built a realacc 4 years ago and my youngest son threw it in the ditch before I ever got to use it and there it sat for a year, I’m thinking this might be a good first buy....
@Jamesn-js1zp
@Jamesn-js1zp 5 жыл бұрын
Will the flight controller work with a Matek Systems F405-WING, i.e. will the DJI OSD work on the F405 UARTS?
@MadRC
@MadRC 5 жыл бұрын
As long as it supports betaflight then yes.
@anthonysmith5979
@anthonysmith5979 5 жыл бұрын
Whats the IPD on the goggles? bought Fat Sharks and had to sell them as they didn't go wide enough. regards Tony Australia
@robrowbotham1814
@robrowbotham1814 5 жыл бұрын
Great informative video as always. One quick question......I already have the Goggles RE and Ocusync Air Unit setup, would there be any advantage if I also bought this system?
@kennethnguyen98
@kennethnguyen98 5 жыл бұрын
Do you know if your 3D printed part will fit on the Marmotte as well?
@MadRC
@MadRC 5 жыл бұрын
If it’s 22mm height then it should
@colinchloe5799
@colinchloe5799 5 жыл бұрын
Hello ! thank you for this video.. Just waiting for mine arriving soon ! can you tell what GPS do you use ? is there any choice for this kind of stuff for FPV . So useful on my Mavic ! thank you
@MadRC
@MadRC 5 жыл бұрын
Hi, Im using Matek GPS with out compass, TBH GPS Rescue is not great on BF but its a get out of jail card really.
@colinchloe5799
@colinchloe5799 5 жыл бұрын
Mad RC thank you!
@DC-ti3ci
@DC-ti3ci 5 жыл бұрын
Great vid and very thorough. In your comment below on using the GPS as a betaflight failsafe, I assume you mean GPS Rescue. How do you intend to get it to work without any OSD info? I use GPS Rescue on all my quads (about 15 - 3" to 7") and it only works if you have OSD to feed back data i.e. you need number of Sats locked, min Sats for GPS rescue, minimum distance to home, direction to home, distance to home, altitude, descend distance ... all without which GPS rescue is pretty much useless. Would be great if you have a solution because my DJI fpv Flymore combo is on the way! Thanks in advance! Oh, subbed btw!
@andriroyantara
@andriroyantara 5 жыл бұрын
I have tried gps rescue, but sadly its failed, the quad suddenly cut off power, perhaps the problem is not enough power to supply air unit that need power from my matek f722 std, i have however, order bec step down to overcome this situation, i'll let you know my result soon after i have installed bec, but for sure, there is none of the info that you need in the osd regarding how many satellite you have, or is it gps fix or not, so its come to only from wether you can arm your quad or not, i used that option to get gps fix before i can armed my quad
@DC-ti3ci
@DC-ti3ci 5 жыл бұрын
@@andriroyantara I use lua script to see number of satellites in my Taranis. But I've had same experience, when I switch to GPS rescue, the quad loses power and tumbles to the ground.
@neilfpv
@neilfpv 5 жыл бұрын
That's great to hear that I can still use our remote. I have a Jumper T16 controller. My flight controller is HyperLite F4 OSD. If that's the case, how much will be the estimated cost for me?
@ianozborne1555
@ianozborne1555 5 жыл бұрын
Neil Camara assuming you have the rest of the quad you’ll spend about 700 for goggles and an air unit. I’d recommend getting a crossfire tho it’s worth the extra 300
@jltv5443
@jltv5443 5 жыл бұрын
does gps show data on the dji fpv goggle? how does it work?
@MadRC
@MadRC 5 жыл бұрын
Currently no only battery voltage. GPS is simply for Betaflight Failsafe.
@jltv5443
@jltv5443 5 жыл бұрын
Mad RC i see thanks!
@mrtokyo1989
@mrtokyo1989 4 жыл бұрын
Thanks, lots of good info here. But there was a little too much movement with that hand, became dizzy :P
@MadRC
@MadRC 4 жыл бұрын
Sorry about that
@kool-k-kel
@kool-k-kel 5 жыл бұрын
best videos re : dji fpv so far, i notice a gps on the front , how are you using? im coming from an inav point of view, also do you think if i used inav with gps i could still utilise the rth functions... Thinking of putting an air unit in my 7 inch shredder frame, it features esc`s on the arms and im using probably 30mm standoffs fair bit o room in there. oh im based in Cardiff. You sound like your from this neck of the woods (area)! great channel , cheers!
@MadRC
@MadRC 5 жыл бұрын
Yea in betaflight GPS is only failsafe but Inav gives far more options. It’s a tight fit in any frame tbh.
@repaid1
@repaid1 5 жыл бұрын
Just checking in, Good info..have no use at present for DJI's offering as such...Just collecting knowledge for you know where :p
@maxm5523
@maxm5523 4 жыл бұрын
that hand!
@MadRC
@MadRC 4 жыл бұрын
Its everywhere
@Inigo748
@Inigo748 5 жыл бұрын
GepRC mk4 HD is another compatible frame.
@CHDGREATEST
@CHDGREATEST 5 жыл бұрын
Hi, are the prop still view by the camera if we use GEPRC Mark 4 frame? Thanks
@adroc9841
@adroc9841 5 жыл бұрын
Can you post the thingiverse link please?
@MadRC
@MadRC 5 жыл бұрын
Will do shortly I’m just uploading now.
@adroc9841
@adroc9841 5 жыл бұрын
@@MadRC thx
@MadRC
@MadRC 5 жыл бұрын
try this www.thingiverse.com/thing:3834484/
@paulkazjack
@paulkazjack 5 жыл бұрын
Mad RC, where do you fly?
@MadRC
@MadRC 5 жыл бұрын
Mostly South Wales.
@wavydavy4138
@wavydavy4138 5 жыл бұрын
bruce was on fire last night, think gary was defo demonitized.
@MadRC
@MadRC 5 жыл бұрын
Lol yea I try not to do that to him 😂.
@witoldrozak6171
@witoldrozak6171 5 жыл бұрын
Excellent video! Don't bother with the betaflight resources remapping video. Bardwell already has an excellent one.
@MadRC
@MadRC 5 жыл бұрын
Yea he literally just did a new one. I did it the old way and was a faf lol
@lgrip1688
@lgrip1688 5 жыл бұрын
So what Is the deal of these fc's compatible with betaflight without osd,, in your world it goes like this,, WHAT A PISSER,, IN MY WORLD IT GOES LIKE THIS,, WTF!!!!
@humbertocortes68
@humbertocortes68 5 жыл бұрын
Sorry... But nobody... Nobody ask... Why DJI dont put a f... Fan built inside of this googles... I live a 38_42 *C, and with hight humidity. U can answer???
@andriroyantara
@andriroyantara 5 жыл бұрын
Dji goggle do have a fan inside goggles
@humbertocortes68
@humbertocortes68 5 жыл бұрын
@@andriroyantara thanks
@mrb2917
@mrb2917 5 жыл бұрын
lol
@Moffino23
@Moffino23 5 жыл бұрын
To je ale debilni reklama .... to její ,,yes” mě dostává 😂
@ScottyLovey
@ScottyLovey 4 жыл бұрын
I understand you can use other transmitters but do you need to instal another receiver if not using the dji transmitter?
@MadRC
@MadRC 4 жыл бұрын
Yes.
DJI Digital FPV - My Overview, Thoughts + Menus & Settings
23:51
Rotor Riot Spec Kwad - HD1 Build with DJI FPV System
42:51
Rotor Riot
Рет қаралды 190 М.
Tuna 🍣 ​⁠@patrickzeinali ​⁠@ChefRush
00:48
albert_cancook
Рет қаралды 148 МЛН
My scorpion was taken away from me 😢
00:55
TyphoonFast 5
Рет қаралды 2,7 МЛН
DJI HD FPV Unanswered Questions Answered!
18:45
AndyRC
Рет қаралды 32 М.
DJI HD FPV Best Antenna Setups
17:16
AndyRC
Рет қаралды 85 М.
FPV Drones - Explained
16:00
TRONCAT FPV
Рет қаралды 8 М.
How to Build a Fixed Wing Drone? | Electronics Basics
15:15
FLIGHTORY
Рет қаралды 24 М.
Build Your Own DJI FPV Quadcopter - Part 1 - Initial Assembly
30:53
Joshua Bardwell
Рет қаралды 62 М.
DJI FPV Wiring Guide - How to connect to Betaflight
10:46
Drib 2
Рет қаралды 110 М.
Tuna 🍣 ​⁠@patrickzeinali ​⁠@ChefRush
00:48
albert_cancook
Рет қаралды 148 МЛН