Magnetic Drill Press DIY

[@chantalfarr7743]

This press has worked like a charm for my projects kzbin.infoUgkxajoEbapTfqWaadnqb04h6U576yxXp-FE . I didn't even secure it to my table top, mainly due to the fact that I was using a 15 lbs drill vise. It's not flimsy at all as to what others have claimed it to be. Make sure the locking nuts and levers are secured and there won't be any issues with light pressure and patience. I was able to drill through aluminum, plastic, and steel (steel took a while) with no problems at all. Yeah it took a little longer than a regular drill press, but I don't have the space OR the money for one.The instruction manual was worthless, but luckily assembling the press was intuitive. However, the manual would be good for ordering replacement parts if needed. There is a nice breakdown of the parts that are included in the kit. Before ordering, make sure it is compatible with your unit, it is clearly stated what models the press is compatible with.This was an excellent purchase for $40!!

[@rodolfod.9270]

Excelente trabajo !!! Buscaba una guía y me la diste. Haré el mío ahora. Desde Bolivia Gracias mil !!!

[@tobiasbobel6070]

Bis auf die etwas schwache Bohrmaschine gut geworden

[@samsworkshopdiary5748]

Danke! Ja die Bohrmaschine ist nicht so toll, eine stärker untersetzte wäre schön.

[@prakashdadiya1490]

Superb quality By the way you made its simple and quick 🙏🙏 I am very much impressed with job Can you provide us design measurements or pdf of the project 🙏 If possible let me know by replying 👍👍 Thanks

[@daviddaddy]

Ive seen many of these "diy mag drills" before, but yours really Stands out as the Best one! You did an amazing Job!!! I really really Love how you incorporated your Own little. Rack and pinion design. Its a Beautiful design! Bless you for Sharing and all your hard Work! Take care. P.s. new Subscriber because of this build.

[@samsworkshopdiary5748]

Thank You very much for your kindly words! 😊

[@daviddaddy]

@@samsworkshopdiary5748 you're very Welcome! Im actually watching your Doy tormek right now lol Good Content Bro!

[@eighteenth-pioneer]

Сделано конечно круто и профессионализма у него не отнять, но вот решения (ИМХО) довольно спорные. Столько возни с трансформатором от микроволновки, когда я думаю куда проще использовать магнит от двери для домофона. По мне так избыточна толщина метала на боковинах - мне кажется аппарат неподъемным получился и при горизонтальном сверлении доп вес =доп нагрузка на магнит. Но больше расстроило отсутствие шторки в зоне сверления. С учетом того что там установлен БП с корпусом в сеточку, то опилки , которые неизбежно будут туда попадать рано или поздно убьют БП. И тем не менее по факту у него такой инструмент теперь есть, а у меня, всего такого умного, нет :). Всё равно, Sam's Workshop Diary, спасибо за идею и подробную съемку процесса.

[@ВладимирСтруков-ъ5л]

и них на подъездах магниты не стоят ,наверное.дернуть не откуда.

[@timandrew4515]

Amazing! Great way to make a powerful magnet.

[@samsworkshopdiary5748]

Thank You! That wasn't my idea, I have seen that on other youtube videos.

[@CoinPickerUS]

Nicely done Sir! I have a Kawaski branded drill in that exact same color. Putting your version of a magnetic drill on my project list. Great inspiration.

[@samsworkshopdiary5748]

Thank You very much! For the low price the Kawasaki is a great machine.

[@raulboja8679]

whats the spec of the drill?

[@JackWilson327]

Nice job. Good ideas. Thanks for sharing.

[@thyranusrex2263]

Excelente trabalho, parabéns, ficou muito sólida e robusta, acho que vou fazer uma dessa pra mim, realmente gostei, desejo sucesso a voce.

[@samsworkshopdiary5748]

Thank You!

[@ilROSS]

Beautiful project!

[@samsworkshopdiary5748]

Thank You!

[@mrohny76]

wspaniała robota👍

[@samsworkshopdiary5748]

Thank You!

[@schuylergrace]

How did you wire up the two microwave transformers? I'm guessing you kept the primaries (the windings that would normally be connected to mains power), wired them in series, and connected them to your 12VDC 10A power supply. And were those transformers designed for 240VAC mains power? That was a very nice looking build, and I love that you just built the damn thing, instead of talking and talking the whole time.

[@samsworkshopdiary5748]

Thank You very much! I put the primaries parallel to the transformer so that each got the 12v. I previously roughly calculated how much current the winding could take and at 12v DC the current fits quite well. My transformers were designed for 240V AC I think for a 115V AC you need a lower DC voltage.

[@schuylergrace]

@@samsworkshopdiary5748 Thank you. That helps a lot!

[@FrancescoCarboni84]

Direi ottimo lavoro ...molto bravo🤩🤩👍🏼👍🏼👍🏼

[@samsworkshopdiary5748]

Thank You!

[@aviyov]

Well done! A real inspiration. Where did you get the rack and pinion?

[@mboxapps5530]

ficou muito bonito, o problema é que o atrito do metal com metal fará com que crie folgas ao longo do tempo de uso devido ao desgaste do aço, o ideal seria fazer com rolamentos ou buchas de nylon...

[@samsworkshopdiary5748]

Obrigado pelo seu comentário. O passeio não é ideal. Ele pode ser ajustado em uma direção, no entanto, apenas com as jogadas laterais eu tenho que viver.

[@frankfonseca4103]

amigo envieme las medidas de de altura ancho y los demas para hacer uno gracias

[@TonimAquarium]

Moin moin, sehr schönes Projekt💖 😮😮 dein Kanal hat ja zugelegt, Wahnsinn....sehr geil👍👍 (irgendwas mache ich falsch😂😂) Grüße Renzi

[@samsworkshopdiary5748]

Danke dir! Ja der Kanal ist gut gewachsen. Da gehört halt auch Glück dazu, zumindest wars bei mir so... 😁

[@jean-philippedaneluzzi3151]

Good evening, Very nice achievement, would it be possible to have the dimensions of length, thickness, dimension. thank you so much

[@samsworkshopdiary5748]

Thank You! Yes, I can send you pics with the dimensions. you can contact me at instagram or sent me an E-mail (adress on my channel site).

[@williamlanphar630]

Very nice.

[@StillOnSteel]

Great work. Love it!

[@samsworkshopdiary5748]

Thank You!

[@nastaguinannunes6344]

Ficou de primeira muito bom gostei bacana

[@samsworkshopdiary5748]

Thank You!

[@sabanhal1450]

super svaka cast

[@johnc6343]

this was great but idk how much we broke folk can save when adding up all the materials lol.

[@canalejavier]

Hermoso trabajo!!! le podrias haber agregado un regulador de RPM ....

[@spudatbattleaxe]

Yo estaba pensando lo mismo, y no sería tan difícil tampoco ya que hizo todo los cables por su propio. Creo que todavía puderia, si lo quería. Eso es lo único parte que yo cambiaría. Quiero construir uno y me gusta mucho este video!

[@frankfonseca4103]

amigo soy de venezuela envieme las medidas de las placas para hacer uno igual al suyo tremendo proyecto gracias

[@thrillbillyjp1]

So what the heck was magnet for

[@ziyadeyvazov2350]

Super

[@sargon1576]

А на хуя ты трансформатор второй восстанавливал если в итоге ты от него отпилил тот же отход что приварил до этого ...

[@vutrung5879]

👍👍👍❤❤❤

[@АлександрЧурилов-в8ы]

Зачем лобзиком резать такой метал?

[@aluizioga]

uau

[@hectortrivinos8594]

No puedo ver yuutu

[@frankfonseca4103]

amigo envieme las medidas de de altura ancho y los demas para hacer uno gracias