Magnetic Motor Using Magnetic Repulsion

[@ravenmad9225]

Misinformation,title should be "Man spins wheel".

[@wesleylong1830]

Electricity is generated with magnets and he’s testing different Pollari and configurations of how magnets could be set up in order to have a perpetual state of motion

[@VashtiWood]

@@wesleylong1830 so untrue. Title is free energy. There is nothing "free" in this model. First, energy is needed to "kickstart" the spin. Secondly, as was repeatedly demonstrated, additional every input is required to keep the spin going, otherwise it just rings down to a stop... 🤦

[@66Grudge]

Yawn

[@deepwinter77]

@@wesleylong1830 it's physically impossible to get perpetual motion from magnets, no matter how many what orientation or shielding, the energy out will be less then then energy put into the system. This has been tested thousands of times. Its never worked because there is no way for it to work. Its not even theoretically possible. So many people have been scammed by this claim over the years it's truly sad.

[@FreeMagneticEnergy2]

@@deepwinter77 - GOOLE: German magnet car motor.

[@7sonderling]

Nice work, no perpetual motion, useless.

[@Archin-dn4bp]

on my channel really working gravity engine

[@adisharr]

Congrats! You've made a wheel.

[@AtimatikArmy]

Ok, your point? Obviously didn't work. Oh yeah click bate, got it...

[@SubNano144]

Great work Daniel. It's very challenging to use conventionally shaped magnets for this purpose, as you can only control their position, and not their shape as you would be able to with custom fabricated magnets (which would require serious work). There is one kind of asymetrical magnet that can be purchased on the market though, and that is pyramid shaped magnets, which would be worth using for some of your experiments. There are also a few tricks that you can use to passively manipulate the magnetic field of conventional magnets more than simple asymmetrical alignment. By joining multiple different gauss magnets together at the right angles, using appropriate material between them which only partially conducts the field, you can move the bloc wall. Another option is surrounding the magnet with magnetic shielding, leaving enough space between the magnet and shielding on all sides so the magnetic field remains intact, and only having an opening in the shielding on one side, allowing the magnetic field to only escape from that opening. Keep up the amazing work. Your efforts are not going unnoticed to those who are paying attention, and it is very inspiring.

[@christianjon8064]

I bet you that AI could solve that problem and find the most efficient ways to design and align the magnets.

[@deepwinter77]

Encouraging working on building and making is great, but encouraging him to waste his time and money on free energy / perpetual motion isn't doing him any favours. He's clearly a smart kid but hasn't received the mathematical and physics education yet to know magnets as cool as they are, are not a source of free energy. This is a common misunderstanding of magnets, and many many people have wasted a lot of their own time and money discovering this.

[@SubNano144]

@@deepwinter77 Not sure why you are wasting your time watching his content, let alone bothering to leave comments here. You believe you know all there is worth knowing, and therefore lack the ability to gain any new information that conflicts with your existing beliefs. Just as nothing we could say to you or show you would convince you of anything, I assure you that you will not convince him or any of us of what you are saying. Some of us have already invested thousands of hours over years into studying these concepts, and understand more than you could ever imagine about these technologies and areas of research, so your weak arguments hold absolutely no weight from our perspective.

[@deepwinter77]

@@SubNano144 I'm very easily convinced just show me over unity. Measurements in complete and measurements out complete. Energy measurements not voltage or amps, total energy used and produced. I've seen all sorts of claims throwing around amazing numbers but they never seem to demonstrate energy used and energy produced. Surely for a world changing technology like this, that's the minimum to expect. Then we can get into power factor, inductive loads, real power or apparent but to begin with energy measurements. You think because you have years of time in this it can't be wrong? And you assume I am not educated. Any system I design and install works and I know what it's efficiency is going to be before hand, because I have done all the calculations. Its based on over 100 years of knowledge tested and tried. Yet all these online claims can't demonstrate anything or describe anything there's not even a plausible theory. The vast majority of them are just simply misunderstanding electricity.

[@SubNano144]

@@deepwinter77 Sorry but I know better than to waste my time trying to convince you of anything. There is a significant psychological barrier that has been created by the lifetime of indoctrination into limited scientific models, gaslighting and an internet flooded with fake scams that we have all been exposed to. Short of being shown an example of the technology in person, I believe the only way anyone who adheres to the scientific method can reach the point where they find any form of evidence which can be found on the internet compelling, is if they have followed their own journey to enlightenment and managed to break through the mental barrier on their own. I already knew that suppressed technologies existed even from a young age and never denied the possibility, but it still took me decades of studying uncommon knowledge in unrelated STEM fields before finally reaching the point where I could get past the psychological barrier myself, and only then could I even begin learning and understanding the reality of the relevant physics, and gain enough insight to be able to see through the noise. Up until this point, I've read hundreds of books and papers published by prolific researchers, and taken in many thousands of hours of video footage including talks, experiments, results and replications conducted by countless experts, hundreds of researchers and thousands of hobbyists. All this knowledge can be found by any motivated individual who is ready to understand it, but there's no point in trying to push it on anyone who hasn't already reached that point. And no, I don't assume you are not educated. The more education you have received, the worse you will have been indoctrinated to your own detriment. After years of being locked into simplified scientific models, you will have a much larger challenge to overcome than a young kid like Daniel, who's knowledge was never considerably biased away from that which has been kept out of mainstream education. I actually understand your mindset incredibly well, which is why I know better than to waste my time attempting to help you see what you are missing. The calculations you think tell the full story of electricity, are based on simplified models that exclude a variety of phenomenon that are essential to these areas of research, and the math that is needed predates the modern high level models you are attempting to fit to these concepts that you don't understand. It's actually been in Electrical Engineering textbooks since the 1800s, when past giants like Faraday, Tesla and Steinmetz studied and understood electricity more comprehensively than anyone over the last 100 years. Even according to mainstream physics, which doesn't adhere to simplified Electrical Engineering models, electricity is not a single field, but rather a hybrid field comprised of a Magnetic field and Dielectricity field. Maxwell's original equations include both components, but the Dielectric component was eliminated when Heaviside synthesized Maxwell's equations using vector calculus to make them practical for engineering purposes. Since Dielectricity is not factored into modern equations and there's no technology which can directly measure it, most engineers aren't even aware that it exists. Even those who learn the fundamental physics of the hybrid field of Electricity, assume that it can only exist together with the magnetic field within the same frame of time. Modern engineers are taught how to design well-balanced circuits that have mechanisms to dampen spikes and avoid the unwanted effects that are inherent to electricity, which would cause violent explosions and fires if left unchecked. Those unwanted effects are the Dielectricity energy interacting with conductors, which is the only condition under which it can be observed in conventional closed circuits. Good luck. I hope you are able to overcome your limited mindset within your lifetime.

[@eliastadele4357]

Why are you guys appreciate him to continue with false video you are killing the next generation guys

[@magnetmadmanmaths5819]

Dont know what you try do do here. Show us a magnet moror that do some work.

[@sethstubbs5631]

No such thing as free energy.😅 Basic physics

[@namasnamas3002]

Now put rod horizontaly and two plates with double magnets against this plate with loads of magnets,and let the magic begin

[@christianjon8064]

I feel like this could be somewhat dangerous if that thing actually does get spinning really fast by itself. He might need to be doing this inside some kind of chamber or something once this gets closer to success

[@fxeconomist]

Gotta be fake. I see like 4-5 cm between the stator and the rotor. The distance is ginormous for the magnets to have any influence. Remember the inverse square law.

[@geraldwinkler302]

So, what exactly is the effect shown here? You are inducing mechanical energy into the system with your hand and when it is used up by the heat of friction, (in the bearing, ait drag...), the system stops. What exactly do you need the magnets for?

[@jogoe2865]

He tried to rebuild one from the devices what can be found here on yt, what spins only with the magnets. I forgot, with what keywords you could search for it to find it. Well, it was worth a try i think, even its tricky to find the right spots, and most of this things are anyway fakes, just to sell some plans.

[@class2instructor32]

​@@jogoe2865 They are all fake.

[@dans-designs]

Nice video Daniel, not sure how this could be called free energy as the Rotor slows under due to the magnetic lockup inherent in this type of design.. Have you been able to get this to spin freely by itself? Thank you for your reply to my comment about my design I wanted you to have a look at.. It is still in the design phase and I am not one for the camera lol but I am happy to share the designs I do have in hopes you may be able to contribute to it?

[@jimwei4life]

It has the potential to generate free energy given the fact that it is attempting to spin, although it does not have magnetic shielding like the working ones. With shielding on the magnets to focus the magnetic force in one direction, I believe this could work. They are very busy though because they just opened their business for selling products and are just making a few prototypes on something and then moving on to the next thing.

[@deepwinter77]

Unfortunately none of his free energy systems are free energy systems. They don't work. Like everyone before him who ever tried this, putting an alternator on a motor produces less energy then it's input.

[@dans-designs]

@@deepwinter77 indeed, it has become clear to me after 20 years of experimenting with magnets that any "free energy" system can only be made by following the polarity of a magnet and flipping that accordingly.. like a mobius strip..

[@deepwinter77]

@@dans-designs Unfortunately that will not create free energy. Magnets are simply not a source of free energy, you will always need to input more energy to keep it spinning and this is all without a load the second you put a load on it the force to rotate increases. Listen to a generator when you turn a load in it will slow down or use more power/diesel.

[@dans-designs]

@@deepwinter77 I understand where you are coming from and with 5 years experience building permanent magnet motor/generators for a company called LMC I agree for the most part. To get a fully working Magnet powered generator we need to think completely differently about the whole system, not just rotating either a magnetic field or a copper winding but instead leveraging the motive force of attraction and repulsion in one system that uses both at the same time.. My research has proven that magnets do have the force required to generate power by themselves and the speed of oscillation is self governing based on the electrical consumption on the output end.. My research is nearly ready to share and i will be making it opensource once the current hurdles are overcome..

[@MMTube]

And it's getting more difficult when you put a load on it!

[@audegottoeaudegottoe363]

Have à wonderful New Year's !// thanks

[@SC.243k]

Great work

[@SINANOZYOLDAS]

Since 15 years, I have been dealing with angular energy electricity generation systems (R&D). My positive designs about angular continue. In this regard, my own financial means are insufficient, I had meetings with many businessmen, they accepted the financing of the project, but they gave up when it came to signing a protocol, that is, when it came to formalisation. If there is an entrepreneur who will take firm steps with me on this path, who is idealistic, has financial means and wants to make an official protocol, I would like to meet. 98% of the published videos are wrong and do not work. I know the mistake they all make.

[@runtime1976]

CAN'T SHOW IT RUNNING WITHOUT THE MUSIC... BECAUSE YOU WILL HEAR AN AIR COMPRESSOR.

[@patty1991]

Maybe.. It need a half flywheel to spin over the zero point.. Or with gravity and a wight ("blei" not magnetic) I experiment with it now too, but with a old long motor Coil from a dead vacuum cleaner that I found last night on the way to home and a ring magnet that I have! Aaaahh this crazy brainstorming KZbin free energy Videos 😂⚡👍😎

[@nareshbhadane2533]

Hey I want these magnets in India, how can I get them?

[@01worldguy01]

...OK .. what I see is NOT free energy motor ..YOU ARE TO MOTOR WHEN SPINNING THE WHEEL ...as soon as that energy is gone so is your wheel moving ..... OK .... I know I am not educated enough ...so please show me when it works on its own please ...thanks

[@elouenren]

Das ganze geht aber um einen Generator anzutreiben funktioniert es nicht denn ein Generator bremst aus Sie das Video mit einem KZbinr namens Norio

[@jensbuchholz5766]

👍👌

[@Elnufo]

you had ONE job.... and failed.

[@pythagorasnosceteipsum5373]

Hello, look for inventor Muammer Yildiz Magnet Motor. Working & much Power. Resonance is key

[@christianjon8064]

What if the spinning wheel was a lot heavier? To get it over the hump by storing the force as momentum?

[@joshturner9766]

It would cost more energy to get started thus same problems

[@YourSoundStudios]

It doesn't work. Stop wasting your time.

[@craftymulligar]

Least you tried.

[@lorenzojones7627]

Get that dough lez go

[@yasirvasquez7563]

Les recomiendo que vean a umberto baudo

[@OskarTBrand]

fail

[@deepwinter77]

You proved there is no free energy.

[@ШАРАВЕРТ]

Ты же не правильно сделал...

[@Plumharambe]

Everyone always says free energy doesnt exist but fail to recognize that gravity is an outside force you can take advantage of. Food for thought.

[@evancole6863]

Gravity is actually the resistance or push of an electrical or magnetic field on the dark energy field, which occupies the universe. The electrical field of matter is weaker in certain areas at a quantum level. And dark energy, like lighting, tries to find the path of the least resistance. When it finds the weaker resistance in the electrical field, it penetrates through it and the same process takes place again throughout matter. What causes matter to fall at different rates isn't due to the weight of the object. It's due to the medium that it passes through. 2023 and we know what gravity is.

[@CreaKids-qp7ox]

Hi I have tried to contact you by mail several times, can you please answer? thanks in advance

[@nareshbhadane2533]

Hey I want these magnets in India, how can I get them?

[@tubefish666]

Spare your money, because "free energy" motors NEVER work. That's basic physics.

[@nareshbhadane2533]

Hey I want these magnets in India, how can I get them?

[@jogoe2865]

You can get them from China easy. They are all manufactured there.