Mounting the Main Gearbox to the Fuselage of a ultralight helicopter. SUPPORT MY CHANNEL: www.paypal.com/donate/?hosted... This is Part 12 of the EXPERIMENTAL HELICOPTER BUILD SERIES. #buildseries
Пікірлер: 92
@Abu-BasiLL3 жыл бұрын
Unbelievable extreme precision in performance , I’m still following
@user-qv9cv3iw9t3 жыл бұрын
Отличные видеоролики.С большим интересом смотрю все Ok!
@JeffChoppah2 жыл бұрын
Just pressed my half's and noticed this gap between them... I had to come confirm from you, my counter reference guy 😁 🤝 now I can relax was damn worried... There is need to install some rubber like gasket to seal the gap otherwise the dust into the gearbox will be too much...
@juancarloscasabuono66513 жыл бұрын
I have pictures of 1983 sitting in the original Cicaré CH-4, nice build, congratulations.
@ultralighthelicopter3 жыл бұрын
Thanks juan carlos... Nice :-)
@daos33003 жыл бұрын
fantastic project! i assume you know how to fly it..? hehe.. would also be nice to see your shop and how it's laid out, some nice equipment in there.
@getuliocavalcante52153 жыл бұрын
Very cool , bravooooooooooooooooooooo
@abdoeshwehdi84893 жыл бұрын
thank you bro nice work
@Stubytube3 жыл бұрын
As always good video, there is already less and waiting for the blades and tail rotor.Felicitaciones
@rasbees3 жыл бұрын
Happily following you. from India.
@user-kx4st7hr3i3 жыл бұрын
بصراحه عندك ابداع جيد كلما اشاهد مقاطع الفديو اتمني في نفسي اني اوصل لمرحلة اصنع هيلوكبتر لاني احب الطيران عندي هواية للطيران كوني لدي 36 قفز مظلي حر
@fernandocardeno77853 жыл бұрын
Verry nice and great...i hope someday i know how to asseble homemade helecopter...
@diegot11313 жыл бұрын
Voy a disfrutar del video 👏👏
@user-kx4st7hr3i3 жыл бұрын
ممكن توضح لنا اكثر للحركات المكنيكية لهذا العمل الرائع بالنسبه للارتفاع والهبوط وللامام والخلف لليمين والشمال لانه هذا الذي يجعلني افكر فيه اكثر
@heriyadi91993 жыл бұрын
Thanks bro
@nikus7163 жыл бұрын
I promised myself that if I saw you flying your helicopter, I would also build a helicopter. Good luck and greetings from Poland :)
@ultralighthelicopter3 жыл бұрын
thanks nikus716 :-)
@christopher.ellah1232 жыл бұрын
Pls can u tell me the name of the engine and how to get it
@leemnav3 жыл бұрын
It's going well , nice work as always .
@ultralighthelicopter3 жыл бұрын
Thanks leemnav :-)
@jendralsontoloyo67063 жыл бұрын
I support you to complete this project, I love ultraligh helicopters, one day I want to have one
@ultralighthelicopter3 жыл бұрын
Thanks for your support :-)
@kakgamers40893 жыл бұрын
good👍😍from Cambodia
@1tobicat3 жыл бұрын
I just found your channel and could not be happier. Fantastic content! Are you a helicopter pilot? If not, please take us with you as you learn on simulator and any other training you do do in preparation for testing this beautiful machine. Cheers!
@ultralighthelicopter3 жыл бұрын
thanks 1tobicat.
@richardgrt47573 жыл бұрын
Bravo that's great work 👍👍👌
@ultralighthelicopter3 жыл бұрын
Thank you :-)
@TheMarciotec3 жыл бұрын
Fine work. I am always impressed by your level of dedication. Marcio, from Brazil.
@ultralighthelicopter3 жыл бұрын
Thank you Marcio :-)
@saisumanth21603 жыл бұрын
Waiting for take-off sir
@bosshogg553 жыл бұрын
Are you using a drone for the video shots? Which one?
@karlalton31703 жыл бұрын
Looking good so far mate ace job 😁😁🤘🤘
@ultralighthelicopter3 жыл бұрын
Thank you karl alton :-)
@GabrielAugusto-wk6zi3 жыл бұрын
Fine work, congratilations of BRASIL
@ultralighthelicopter3 жыл бұрын
Thank you Gabriel :-)
@seamuscashin26063 жыл бұрын
i hope those guys in africa building helis look at your work the will soon give up bravo
@pilotarix3 жыл бұрын
Very interesting project. I really admire your craftsmanship. That you make all these parts with only a limited amount of high end machinery is really impressive. I am also interested in homebuild helicopters but I can't even read technical drawings so I have to buy a kit with allready machined parts. Currently the Mosquito and the Helicycle are my favorite candidate. However, I will not start building until I finished my PPLH license. I found the plans for your machine on the internet. Interesting, the design seems to be from the early 2000. Do you know if there are flying machines out there. I mean really flying not just hovering in ground effect. Could not find anything on KZbin, do you know if there is a kind of "user group" somewhere? Thanks
@JoseManuel-ei6do3 жыл бұрын
Good job. Congratulations since Spain¡¡¡
@ultralighthelicopter3 жыл бұрын
Thanks you Sir :-)
@TuberEver3 жыл бұрын
super
@davidjackson21152 жыл бұрын
Fantastic. ST brackets top {bolted from underneath} looks like more metal could come off flat tags "tappering toward bolt shaft" rather then square to cut as much weight as possible etc.... . Get a big allen key & chop off bent end {to use for sockets} ....weld blob on one end of shaft "then square" blob to fit socket's and use this in cordless drill with sockets for bolts - to save wrist all that turning {looks painful to me}. Great project. Pitty you dont have your basic plans laid out in case others see improvements, eg Im sus of another video showing counter rotating blade regarding the belt to reverse one shaft { looks like the rubber doesnt have enough "gear hug" to make bloody sure it doesnt want to slip & thin belt guide disk} and also the bearings for that belt or that bearing shaft didnt look strong enough / support lacking? Your doing a beautiful job & Im thinking of doing something similar, but 2 washing machine motors for counter rotating {but its pie in the sky for now}.
@kanishkkashyap15083 жыл бұрын
Very patiently waiting for your helicopter slowly slowly! Good luck mate ✌️👍 Do you trust your screws? That they won't get undone due to vibrations and oscillations
@ultralighthelicopter3 жыл бұрын
Thank you Kanashk Kashyap, yes im aware to secure the bolts...
@Wolves2003 жыл бұрын
Good job man!
@ultralighthelicopter3 жыл бұрын
Thanks Dimitri :-)
@jalantrader3 жыл бұрын
I hope next video progress until finish and trying helicopter fly.
@interestinginnovations6192 жыл бұрын
What is that calculation for this gearbox?
@zairulgunawan16703 жыл бұрын
Finaly.. Nex video please... 😁😁😁
@RCSORIA3 жыл бұрын
Amaicing great job i build an ultralight too un my Chanel and its realy dificoult job be strong and good luck!!
@CANALDOYOUTUBERADIOJTB2 жыл бұрын
RÁDIO JTB SÃO PAULO O MUNDO DA MUSICA PASSA AQUI (EMPURRA QUE E SUCESSO) Idealizada pelo radialista, tecladista, guitarrista e cantor Joel Ribeiro, um apaixonado por música e rádio. Nasce a Rádio JTB com o propósito de levar até você o melhor da música nacional principalmente o segmento, forró, brega e sertanejo. Se ligue na JTB,
@FlyXenonRC3 жыл бұрын
Awesome video
@ultralighthelicopter3 жыл бұрын
Thank you :-)
@marcosventurapro3 жыл бұрын
👏👏👍🚁
@user-eu8ij8io5y3 жыл бұрын
Почти готов, осталось лопасти НВ слепить ☺️👍 алюминий марки Д-16т или АМГ-6А?🤔🤔🤔
@makedonski183 жыл бұрын
О, Русский)
@user-eu8ij8io5y3 жыл бұрын
@@makedonski18 не совсем русский 😀 Башкирин с русскою душой. Как в той песне я татарин я татарин человек простой, Внешне я солидный парень с РУССКОЮ душой 😀
@user-ry2ks5ij2b3 жыл бұрын
Мне вот тоже интересно..купит или сам изготовит?было бы интересно увидеть технологию производства.
@user-eu8ij8io5y3 жыл бұрын
@@user-ry2ks5ij2b вроде бы из алюминия сделать хочет 😊 Мне кажется лопасти автожира должны подходить 🤔 можно поставит гибридный компазитный бесшарнирный торсион.
@user-ry2ks5ij2b3 жыл бұрын
@@user-eu8ij8io5y посмотрим.
@laosokkol3 жыл бұрын
👍😊
@truckerray75332 жыл бұрын
nice job
@ultralighthelicopter2 жыл бұрын
Thanks as always Rodney :-)
@truckerray75332 жыл бұрын
@@ultralighthelicopter Youre welcome! So anxious for the complete build & 1st flight
@CMBProjects3 жыл бұрын
Good job!! You would like to see my homemade 1/5 49cc RC car!!
@ultralighthelicopter3 жыл бұрын
I Love :-)
@CMBProjects3 жыл бұрын
@@ultralighthelicopter huge thanks!! :D
@larrypulido91383 жыл бұрын
Excelente
@ultralighthelicopter3 жыл бұрын
Muchos gracias Larry
@harimeher67103 жыл бұрын
Indian 🇮🇳 🇮🇳 🇮🇳 🇮🇳 🇮🇳
@EventsX2ShibaInu3 жыл бұрын
First 💗💗💗💗
@jasonburks59112 жыл бұрын
would a 999cc engine work for the chopper
@tfogelson31393 жыл бұрын
Please do some research on Witness Holes and Torque Seal.
@adrianakelly69062 жыл бұрын
Muito bom
@ultralighthelicopter2 жыл бұрын
Thanks Adriana Kelly :-)
@orahul98223 жыл бұрын
Sir which material is used for rotor blades
@ultralighthelicopter3 жыл бұрын
O Rahul. Probably Aluminum and stainless steel
@locodefra3 жыл бұрын
Felicitaciones..espero impaciente que lo termine.yo también tengo los planos.algun dia lo haré.quiero ver cuando construye las palas(rotor blade)
@eliasaguilar31993 жыл бұрын
Donde los conseguiste ?
@worldrenownedentertainment2 жыл бұрын
plans?
@irfanahmedsahito73213 жыл бұрын
When. It. Competed sir
@kennyrocha26892 жыл бұрын
Hey hermano como te contacto?
@danielc93123 жыл бұрын
Maybe if you tried crowdfunding and got $1-$5 each from a few thousand viewers you could get a Rotax 582. I'd put $5 in. finding a high output and low weight engine is not going to be cheap regardless the option you end up going with. There really are not any cheap ways to get what you need. Even an older Rotax 503 is stupid expensive.
@keynesclinton44833 жыл бұрын
my I joined your team
@l9k7053 жыл бұрын
what is the name of the song at the end of the video? send me I'm from Brazil
@UtSlpilot3 жыл бұрын
Castle nuts and safety wire?
@ultralighthelicopter3 жыл бұрын
aircraftspruce.com
@UtSlpilot3 жыл бұрын
@@ultralighthelicopter Are you going to use castle nuts and safety wire on your helicopter? I’ve noticed you’ve used lock nuts on some critical parts as you have assembled where I would have expected castle nuts secured with safety wire.