Spool Holder for the Chinese Hand Crank Sewing Machine with Electrifying Gift

[@mikepower4113]

Hey Harrison. Another great video. Just made a couple of thread stands. One for the patcher and one for winding bobbins. Your videos actually got my machine running great. Thanks brother

[@MainelyAcresFarmBrooks]

That's awesome!!!

[@chuckfay5781]

The thread post size is 6 mm same size as the hand crank bolt.

[@fredprobst199]

At this time my patcher is on order, so in the meantime I have been watching your videos in preparation for its arrival. Very happy I ran across your site as you have provided a wealth of information needed to get it running properly. I would like to mention one thing in regard to the feeding of the thread. There is a difference between spools of thread and cones of thread, which cause problems when sewing. Spools of thread are designed for the thread to be pulled off from the side of the spool and are wound at the factory to do so. Cones of thread are designed for the thread to be pulled straight up from the cone and are wound differently when manufactured. By placing a cone on the top of the machine and pulling the thread off from the side of the cone, the thread twists, which in turn causes a lot of problems with tension settings and thread breaking or jamming. For years I had fought the jamming, tension problems when sewing until a sewing machine representative explained the difference. After that, I no longer complained about poor thread, bad leather, faulty tensioners, and etc. I hope this is of some help, and thanks for the great videos you've provided.

[@MainelyAcresFarmBrooks]

Thank you so much for that added info, super helpful!! That's why I love our subscribers!!

[@TheFishingHobby]

That is a really cool old sewing machine! I will be watching the electric conversion too, thanks for sharing!

[@MainelyAcresFarmBrooks]

Thank you for your comment and all your support!! I am about to putt this old man to bed, but before I do I am going to hit that play all button on your page and let run all night!!

[@TheFishingHobby]

Oh I appreciate that but I have my views covered, subs is all I'm lacking. I do similar things to you I think so I'm going to enjoy your channel. Be back for more later!

[@TheFishingHobby]

BTW, if you need a pulley made for that conversion let me know. I could probably help you out with that

[@MainelyAcresFarmBrooks]

Good to know!! I'll let you know if I get a lot of people interested.

[@fiver-hoo]

Nice to know that works so well. I'm actually sitting here pondering converting to foot powered.

[@MainelyAcresFarmBrooks]

If your interested in adding power to your machine check out this facebook group: facebook.com/groups/1646031288779869/

[@rwind656]

The spool holder is great. I am sure you could sell them if you put them on ebay or etsy. Might take time for people to find them. (I haven't looked for competing products. Have you thought about trying to sell them through Bantam or someone like that that already sales accessories?)

[@MainelyAcresFarmBrooks]

I made them for a while, but I sold out and haven't had the time to get that back up and running. Thanks for looking out!!

[@randolphchappel6098]

Which way is better: for thread to unwind off the spool as it rotates on that paddle-like gizmo or for it to come off the spool; through that looped wire directly above the stationary spool set beside the machine?

[@MainelyAcresFarmBrooks]

The thread stand that sits behind the machine

[@marcegrecco53]

Nice, look forward to seeing your modifications

[@MainelyAcresFarmBrooks]

Thanks Marc

[@geraldocuervo6640]

would like to know if you could please send me in the right direction what needle size and thread size do you use on your machine I'm going to be sewing thicker leather if you could help me out thank you for all your help and your videos

[@MainelyAcresFarmBrooks]

I have a video coming out soon addressing that question.

[@chrisapattee]

Sorry this is off subject, however, I was wondering if I could grind the jagged walking foot down smooth. I have tried filing it down, but it just isnt enough. I want NO tracks on my projects. Thanks man!

[@MainelyAcresFarmBrooks]

I wouldn't grind it completely smooth because those teeth advance the material forward. I would file or grind the edges off and then dip in a rubberized paint. You can also adjust the tension on the presser foot so it's not pressing into the leather so bad.

[@chrisapattee]

Haha, waaaaay too late. Thanks though.

[@MainelyAcresFarmBrooks]

I so sorry, I have been away for a while and I am trying to catch up on all my missed comments.

[@jesusmelendez3696]

Hi. Cobbler Chinese. Can use 160 /23. Needle....what kind. Needle you recommend for heavy leather. Like 8 oz. Or 7 .oz. please need help me. ..have good night.

[@MainelyAcresFarmBrooks]

Yes, you can use a size 23 needle, but make sure it's a HAX1 needle shank.

[@jesusmelendez3696]

@@MainelyAcresFarmBrooks any Brand you recommend. Thank you so much. Have good day.

[@MainelyAcresFarmBrooks]

I buy the universal tip needles from China, you can find them on eBay or Amazon.

[@carlosdavila1274]

nice let me know when there ready

[@MainelyAcresFarmBrooks]

I will do!! Thank you for your comment

[@TheDawg170]

let me know when there ready

[@MainelyAcresFarmBrooks]

I will do, I should have some time coming up soon to crank a few of these out. Thank you for your comment!!

[@MainelyAcresFarmBrooks]

I have the first batch completed!! Video coming very soon, thanks for hanging in there.

[@johnvail3177]

I would love one have my machine coming soon...

[@johnalex3023]

I ordered one. Along with needles from Bantam. Where do u get bobbins for it, and what size are they?

[@MainelyAcresFarmBrooks]

The extra bobbins I got from Bantam Saddle Tack, I am not sure the size.

[@johnalex3023]

Man, I didn’t see the bobbins on their website when I ordered the needles. I see them now though. I got my machine. I haven’t used it yet. I’ve been working up the nerve to take it all apart and do the sanding/finishing that everyone seems to be doing to it. I’m nervous about getting the timing right, when I put it back together. I’ve never sewn before.

[@annamaxflair]

Hi, got one of these stitchers enroute to me , figuring because of injury it won't be long before i'll be setting a motor to it. what types of motors could you suggest?

[@MainelyAcresFarmBrooks]

Servo motors are the best for these machines

[@emmanuelgheusneaud9530]

Where can I get the pulley made?

[@MainelyAcresFarmBrooks]

A local machine shop

[@MrPops880]

hello Sir I just got my machine and at this moment its not sewing :/ I have made all the adjustment as you have done but with no luck it keeps braking the top thread and mangling the bobbin thread , what is the thickest thread you have used on your machine? I'm using T270 #277.

[@MainelyAcresFarmBrooks]

The thickest thread I have used was a T-135, I think the T270 is way too thick for these machines.

[@MrPops880]

Ok great thanks.

[@MrPops880]

what is the AMPS on the motor that you are use Sir ?

[@MainelyAcresFarmBrooks]

I think it's .91 amps if I did the math right. The motor is 115 volt and 105 watts.

[@MrPops880]

Great thanks Sir.

[@vasconcouros.1663]

How many Wats of power does this engine have?

[@MainelyAcresFarmBrooks]

The motor is 115 Volts, AC/DC, 105 watts and the model number is 174667 E-RP.

[@vasconcouros.1663]

@@MainelyAcresFarmBrooks I am grateful for your attention! Purchasing one of these machines, and your observations about them were of great value to me. Have you ever used 1 mm (0.0393701 inch) thick thread? If so, which needle was used?

[@MainelyAcresFarmBrooks]

I normally use threads that are sized by T, like T 90, T 138 and so on. I am not sure what 1mm converts too in the T sizes.

[@norlinasmith9440]

sign me up great idea !

[@MainelyAcresFarmBrooks]

I have two left on our Etsy store if you're interested in purchasing one for your machine. Here is the link: www.etsy.com/listing/584811846/thread-spool-holder-for-your-chinese?ref=shop_home_active_8