EVERY 3D Printer I've Used Tier List

  Рет қаралды 224,942

Major Hardware

Major Hardware

Күн бұрын

I was recently asked by someone I worked with what 3D printer they should get. This discussion got me thinking about every printer I have used over the years. Today I look back on all the printers I have used and rank them based on my experience and if I would or would not buy them again.

Пікірлер: 528
One Clear Winner - Bambu Labs A1 Mini Vs A1 Vs P1S Vs P1P Vs X1
12:40
One Clear Winner - Bambu Labs A1 Mini Vs A1 Vs P1S Vs P1P Vs X1
FauxHammer
Рет қаралды 288 М.
update on the ankermake m5c micro printfarm.
7:11
update on the ankermake m5c micro printfarm.
3d skrivar skoj
Рет қаралды 144
РОДИТЕЛИ НА ШКОЛЬНОМ ПРАЗДНИКЕ
01:00
РОДИТЕЛИ НА ШКОЛЬНОМ ПРАЗДНИКЕ
SIDELNIKOVVV
Рет қаралды 3,3 МЛН
Pencukuran bulu kiwi terlalu berlebihan! Tidak ada kulit, Bukan masalah! Siap dimakan! 😱🥝
00:16
Pencukuran bulu kiwi terlalu berlebihan! Tidak ada kulit, Bukan masalah! Siap dimakan! 😱🥝
SQUAD NYEMIL
Рет қаралды 15 МЛН
Помоги Nuggets Gegagedigedagedago удрать от бабульки Granny !
00:21
Помоги Nuggets Gegagedigedagedago удрать от бабульки Granny !
Фани Хани
Рет қаралды 1,4 МЛН
Incredible: Teacher builds airplane to teach kids behavior! #shorts
00:32
Incredible: Teacher builds airplane to teach kids behavior! #shorts
Fabiosa Stories
Рет қаралды 11 МЛН
The 3D Filament Tier List! Which Should YOU Use?
44:34
The 3D Filament Tier List! Which Should YOU Use?
Zack Freedman
Рет қаралды 826 М.
INSANE 33 3D Printers Reviewed in 9 Months!
36:12
INSANE 33 3D Printers Reviewed in 9 Months!
Loyal Moses
Рет қаралды 24 М.
Upgrading my 3D printer to print the toughest material: Nylon
19:20
Upgrading my 3D printer to print the toughest material: Nylon
TimTheEngineer
Рет қаралды 88 М.
FLSUN S1: What You Need to Know, an In-Depth Review
26:26
FLSUN S1: What You Need to Know, an In-Depth Review
Clough42
Рет қаралды 73 М.
Is Zero Waste possible with a BambuLab AMS 3D printer?
22:08
Is Zero Waste possible with a BambuLab AMS 3D printer?
3D Printing Professor
Рет қаралды 51 М.
I Regret Buying the Creality K1. Here’s Why.
15:44
I Regret Buying the Creality K1. Here’s Why.
The 3D Printing Zone
Рет қаралды 215 М.
Bambu Lab P1S 3D Printer - $500 Less Than X1 But Is It Worth It ?
25:48
Bambu Lab P1S 3D Printer - $500 Less Than X1 But Is It Worth It ?
Mads Tech
Рет қаралды 276 М.
Rethink how you use 3D printer infill!
18:26
Rethink how you use 3D printer infill!
Made with Layers (Thomas Sanladerer)
Рет қаралды 141 М.
The 5 Filament Types You Need to Know (And What They're Good For)
17:28
The 5 Filament Types You Need to Know (And What They're Good For)
The Next Layer
Рет қаралды 617 М.
My Long-Term Review of Each 3D Printer I Own
29:12
My Long-Term Review of Each 3D Printer I Own
The Next Layer
Рет қаралды 97 М.
РОДИТЕЛИ НА ШКОЛЬНОМ ПРАЗДНИКЕ
01:00
РОДИТЕЛИ НА ШКОЛЬНОМ ПРАЗДНИКЕ
SIDELNIKOVVV
Рет қаралды 3,3 МЛН