Make a Holster - The Paladin - Have Gun Will Travel

[@LashKiddCosplay]

I love the videos you make! Whether it's leatherwork or firearm reviews, I love it! Also, if you're open to taking ideas for leather projects, and I don't know if you're familiar with Red Dead Redemption 2, but can you make Arthur Morgan's gun rig? Keep up the great work!

[@SmallCaliberArmsReview]

Just about every leather project I've done has been the result of a suggestion, I'm gathering quite a backlog too! I'm not real familiar with RDR but I will look into it. I know what RDR is, I just never have time to get into it. Thanks for the compliment and thank you very much for watching!

[@HowardWaggoner]

Grew up watching "Have Gun Will Travel" and to see someone take enough interest to recreate the holster brings a lot of joy to this old man. Thank you!

[@SmallCaliberArmsReview]

Glad you enjoyed it. Thanks for watching!

[@dwyanejetersr6470]

I was a faithful fan of "Have Gun Will Travel" Richard Boone sir.

[@SmallCaliberArmsReview]

I'm going to have to catch up someday. Thanks for watching!

[@sherlock1895]

My Dad and I watched Have Gun Will Travel all the time. Dad’s favorite and mine too. I would love to have a holster like the one you made. Absolutely beautiful. Kudos Sir. Cheers, Gary

[@SmallCaliberArmsReview]

I hope it triggers good memories. Thanks for the comment and thank you for watching too!

[@Dave-zb9dq]

For one person to take on the task. For his efforts he makes the gift of talents. Thanks for the post 📯 A+

[@SmallCaliberArmsReview]

Thank you!

[@christianemden7637]

It was just a joy to watch this exhibition of craftsmanship.

[@SmallCaliberArmsReview]

Wow! Thank you!

[@ozzylozada9653]

Thank you for a nostalgic look at the great craft that went into this show.

[@SmallCaliberArmsReview]

Thank you very much for watching!

[@nautifella]

Well done. A true tribute to the character. Paladin was a West Point Graduate, hence the _Black Knight_ theme. He was a major during the civil war, Calvary I think. I forget the reason he left the army, he did mention it in and early episode. He lived in San Francisco because that was the gem of the frontier at that time. The railroad and telegraphs all ended there so his client didn't have to look to hard to find him. I loved that show. I used to listen to the radio drama versions when I was young. It's one of the reasons I selected many of the jobs I've had over the years. I'm still protecting people and won't tolerate the vulnerable being mistreated.

[@SmallCaliberArmsReview]

I tried my best. Thanks for the comment, the information and all that you do!

[@kellyBorgman]

Cavalry not calvary. I have a problem with that.

[@ArizonaGhostriders]

Superb job, Richard!!! He travels on to where ever he must A chess knight of silver is his badge of trust. Clean Shaven, Clean Shaven, is Richard's face. He'll make holsters for the whole human race. Whole human race....

[@SmallCaliberArmsReview]

Lol, I have to uncover it every now and then! Thanks for the compliment Santee! What about a chess knight of pewter?

[@sasquatch885]

That came out beautiful! I’ve made a few knife sheaths. Nothing near that ambitious. I really appreciate your craftsmanship. I use to watch Have Gun Will Travel with my dad when I was a kid. Good memories. Thank you sir.

[@SmallCaliberArmsReview]

Thank you! I've had a little practice by the time I got to this holster.

[@earlperson741]

DAMMMMMMM NICE!!!!!..... YOU GOT PALADIN's HOLSTER ALL RIGHT! GREAT WORKMANSHIP...... MR. BOONE WOULD BE PROUD OF YOU.

[@SmallCaliberArmsReview]

Lol! Thank you, I really appreciate that!

[@earlperson741]

HOW MUCH FOR WOULD YOU CHARGE FOR PALADIN'S HOLSTER???

[@SmallCaliberArmsReview]

@@earlperson741 Unfortunately, I don't make holsters to sell at this time. Maybe when I retire in a few years.

[@mase7557]

@@earlperson741 Contact Mernickle Holsters, they make one. I have bought from them. Very high quality and beautiful workmanship.

[@bosautomotiveservice]

Thank you, was a great series, Richard Boone !

[@SmallCaliberArmsReview]

You're welcome! I agree. Some day, I need to catch up on the series. Thanks for watching!

[@Expart_Ziaur]

That’s a real beauty! Awesome job Richard

[@SmallCaliberArmsReview]

Thank you!

[@Bostonshawn508]

A Man Called Paladin, Frank C. Robertson's novelization of the season-six premiere "Genesis", gives Paladin's real name as Clay Alexander.

[@SmallCaliberArmsReview]

That's what others have said. Thanks for watching!

[@biggusdickus5986]

There was a joke at the time that his name was Will Travel as in Have Gun... Will Travel. 😅

[@billsummy2412]

You have out done yourself ......AGAIN pard ! 🤠👍👍

[@SmallCaliberArmsReview]

Thanks 👍I really appreciate that!

[@WendYTS44]

Yes! Finally a holster video, been waiting for a long time. Love these videos :)

[@SmallCaliberArmsReview]

Glad you like them! They're a lot of work and take a lot of time but they sure are fun! I really appreciate the comment!

[@beachbum8215]

I loved " Have Gun Will Travel" when I was a kid.

[@SmallCaliberArmsReview]

He was quite the suave fellow! Thanks for watching!

[@ronlafitte6864]

That’s a real beauty! You did a wonderful job. I think any sixgun -toting guy would be mighty proud to wear it. I’ll bet that sheet of leather wasn’t cheap!

[@SmallCaliberArmsReview]

Thank you!!! I don't think it was too crazy expensive. When you look at the number of projects you can get out of a sheet like that, the price doesn't seem so bad. Thanks for watching!

[@angelcapote1218]

Wow Richard very impressive 👏

[@SmallCaliberArmsReview]

Thank you kindly

[@bigmountain7561]

I love the rig that Gene Hackman used in The Quick and The Dead. It’s Awesome!! Great Videos Thank You 🙏

[@SmallCaliberArmsReview]

I'll have to find some good clear shots of it! Thanks for the comment and thanks for watching too!

[@useruser400]

This was a very interesting video. First of all, I loved that TV show! Secondly, I’m not a leather craftsman so seeing how this is done was fascinating to me. And the finished product…WOW! Extremely well done, Sir!!! You are a true master at your trade.

[@SmallCaliberArmsReview]

Thank you, very much! I have a few other holster videos, if you'd like to check them out! Thanks for the comment and thanks for watching too!

[@PrimoGIU]

Excellent, as usual! Your videos are educational for a learning rookie, and never boring.

[@SmallCaliberArmsReview]

Wow! Thank you!

[@jlbksinger]

Looks great Richard and you look younger.

[@SmallCaliberArmsReview]

Lol. When I was young, all I wanted to do was look older! Thanks for watching!

[@vikinghomecompanion]

I al so get my leather from Weavers. I try to drive over a couple of times a year. Like you I love being able to pick out my own hides. Most of what I do is hardened leather armor for medieval histic groups. But about 4 years ago now I started doing cowboy action shooting, so I have been branching out into making leather gear for that. Love your video.

[@SmallCaliberArmsReview]

I love the smell of the warehouse! Thanks for the comment and thanks for watching too!

[@vikinghomecompanion]

@@SmallCaliberArmsReview Totally agree. The smell of the warehouse is like heaven. You're welcome and thank you for the great vids. I have a few that I recorded. I have one in particular about Leather Tooling 101.

[@johnt.chambers4204]

Another nice build. I always enjoy watching these. You make it look so simple.

[@SmallCaliberArmsReview]

It's really not difficult if you take your time and think everything through. There are parts that require a really strong grip but it's always enjoyable to me. Thanks for watching!

[@tomstepanowicz6191]

Good job Richard

[@SmallCaliberArmsReview]

Thank you Tom!

[@tomstepanowicz6191]

@@SmallCaliberArmsReview you are welcome

[@Tugar-747]

Great video awesome work on holster, thanks sir.

[@SmallCaliberArmsReview]

Thank you! Thanks for watching too!

[@VinceBearinger]

That was a beautiful job couldn't get more professional I really enjoyed that video. Thank you I would love to have one of them belts with holster!

[@SmallCaliberArmsReview]

Glad you enjoyed it and thanks for the comment!

[@gvet47]

This TV series was probably the major influence on me as far as a gun owner. The majority of my handguns are single action revolvers. I don't know how many rounds I went through till I could draw and fire from the hip hitting cans off of a rail fence.

[@SmallCaliberArmsReview]

Practice, practice, practice! I need to do more. Thanks for watching!

[@georgescarlett2320]

Lookin' good there "Clay", ha! Gb

[@SmallCaliberArmsReview]

Thanks!

[@eprohoda]

greeetings! that's well done! have a good day, Small~👍

[@SmallCaliberArmsReview]

Thank you! You too!

[@bluescatreimer]

Wow that turned out fantastic! You put so much time and labor into that rig, it is truly a labor of love.

[@SmallCaliberArmsReview]

Thank you, I really appreciate that!

[@RIPPER334]

That turned out pretty dang nice!! And you shaved just for that Paladin look. 🤣

[@SmallCaliberArmsReview]

I do lots of crazy little things! Thanks for watching!

[@williamgregory6684]

Nice. Brought back some memories!!!

[@SmallCaliberArmsReview]

Hope they were good ones! Thanks for watching!

[@improvisedsurvival5967]

My pops buddy use to call me have gun will travel when I was a kid. 😂I just remembered that. That was like 35 years ago. Never really knew why he called me that.

[@SmallCaliberArmsReview]

You must have reminded him of Paladin.

[@improvisedsurvival5967]

@@SmallCaliberArmsReview maybe I was a good kid for the most part.

[@jeremiahbeck3292]

That's really amazing craftsmanship Richard great job on the holster looks beautiful!!! I am wouldn't mind seeing you make a Schofield holster

[@SmallCaliberArmsReview]

I'm planning on making Will Ghormely's, "Flames of Hell" rig one of these days! Thanks for the compliment and thanks for watching too!

[@garytodd5605]

Palidin was a great show. Loved it then, still love it.

[@SmallCaliberArmsReview]

I agree! Thanks for watching!

[@popsfitch7938]

Season 6 premiere shows Paladin’s real name on a close up on his card. It reveals his name as Clay Alexander. Love the work. Thank you. Sincerely, Pops Fitch Post Script: Remember “Smoke” ? LoL

[@SmallCaliberArmsReview]

Nice. I need to catch up on the series, I've got a LOT of catching up to do! Thanks for the comment and thanks for watching too!

[@smwalker668]

I'm as picky as anyone, but I'd wear that holster. Great job.

[@SmallCaliberArmsReview]

Thank you! I would like it to be indistinguishable from the original, but that's hard to do from screenshots of a show that was filmed so long ago. Everytime I make one, I compare it with the screenshots again and I say to myself; "Oh, there's something I did wrong". Thanks for the comment and thanks for watching!

[@randymartin2396]

Awesome belt good job

[@SmallCaliberArmsReview]

Thanks 👍

[@arthurvarady7258]

Really nice job, I have been making holsters and gun belts for some time and it is a big undertaking/ A lot of work and time consuming. I have had the same curve in some belts also with the shell placement and you really don’t notice when worn, in time it will settle in. And as far as the 3/4 slot toll I also bought the same one years ago and yes buy once cry once, had to get a better one LOL… very nice work you nailed the look.

[@SmallCaliberArmsReview]

Thank you! I've bought many cheap tools over the years, you'd think I'd learn! Thanks for watching!

[@snappers_antique_firearms]

Great job as always

[@SmallCaliberArmsReview]

I appreciate that!

[@cchtjsett1718]

Awesome just awesome, thanks for the video 👍

[@SmallCaliberArmsReview]

Glad you enjoyed it

[@paulblubaugh589]

can't believe you shaved for the part. I remember Have Gun - Will Travel well. Great reproduction.

[@SmallCaliberArmsReview]

Suffering for the craft! Lol It grows back, again and again and again.... Thanks for watching!

[@biggusdickus5986]

​@@SmallCaliberArmsReviewYou look 20 years younger without the beard.

[@kirkhalgren4933]

I really enjoyed watching this detailed video, and I have a long term fantasy of buying a pistol similar to Paladin's, making the gunbelt/holster and practicing to see how well I can match his (fictional) marksmanship. I lived for three years in my twenties in a back to the land commune with several other craftsmen/women, and leather work was one craft represented, so I am familiar with many of the operations you show, and I own some of the tools. Later, I worked as a Diesel truck mechanic and I agree completely with the philosophy of buy the best you can afford. Mostly I bought Craftsman, which are adequate, but in some cases I spent more for Snap-On, which do a better job in some cases, but are always a pleasure to hold in one's hand. When I added a set of deep well offset box end wrenches, I got Snap-On. They have a nice refinement, called flank drive, which is simply a radius on each of the six or twelve points, which enables use on slightly mangled nuts and bolt heads since the fit is looser, but they also give about 5-10% more leverage by bearing on a shorter diameter. Craftsman now has this refinement, but Snap-On has a smoother finish still. I assume the patent ran out. You did omit one detail, however, namely the loop on the front of the holster which can be hooked up over the hammer to prevent the gun falling out of the holster during the athletic moves we are Paladin perform. Boone, a relative of Daniel Boone, was already an experienced rider prior to being cast in this role and we see the genuine affection he shows the horses on the show..

[@SmallCaliberArmsReview]

I don't remember seeing a hammer thong in any of the episodes I watched but that doesn't mean it didn't exist. I like buying tools, I like using good ones even better. Give the Paladin holster a try, and thanks for watching!

[@jasonmoses6207]

I'm impressed that showing the holster "in-character" necessitated a shave -- Nice! I'd be very interested in seeing this saloon shed you often use. I'll look among your videos to see if you show it off somewhere.

[@SmallCaliberArmsReview]

I have a playlist that shows the building of it and a couple upgrades I did as well. kzbin.info/aero/PL9pOZVU960aBgKshlH70MA9KkqoVr6e8s

[@bigdikannonannon152]

Great work Sir! I am sure you know this but the original paladin holster was made by Arvo Ojala and had a sheet metal liner…Please keep the videos coming!

[@SmallCaliberArmsReview]

I did know who made it but I haven't seen anything that confirms it was made with a metal liner. I do know that Avro Ojala made fast draw rigs and most of them had some sort of metal liner in them. Thanks for watching!

[@bobchronister3429]

Great job.

[@SmallCaliberArmsReview]

Thanks!

[@Yakomoe]

Paladins gun and holster are on display at the Cowboy Museum in OKC. Tons of other too.

[@SmallCaliberArmsReview]

I've seen pictures of one that's supposed to be in the Cody Museum in Wyoming too. The pictures I saw of the one in the glass case with the information cards next to it, is not the one used in the opening of Have Gun Will Travel. I trust the pictures I see with it on the actor. Thanks for watching!

[@greghardy9476]

I believe Richard Boone gave the original (or one of them ) to Jock Mahoney.

[@robertk-qn6mg]

looking forward to more of your vids. Have you done any with exotic leather? What size leather should we keep on hand to make sure we can make one? You mentioned 11 oz. I just want to make sure I have them. I would like to get into firearms and archery too. Would love to squeeze some knife sheaths out too. Thank you. As far as the bend in the belt from the bullet wrap, maybe not wrapping so hard around the rounds or even taping the back maybe (obviously, you would have to tape around the openings)? Or like you said just or at least using a smaller strap to go through the holes?

[@SmallCaliberArmsReview]

I'll have a couple more holster projects in the near future. I have used some rattlesnake skin on a holster but I didn't film any of it, it was one of my very early ones. I like to keep 5-8oz leather around for holsters and a little 3-5oz for liners. The heavy stuff I usually use for welts. A total of around 10oz is a good weight for holsters and knife sheaths. That's my opinion anyway. One of my future projects will have laced bullet loops, that'll give me the opportunity to experiment some more. Thanks for watching!

[@robertk-qn6mg]

@SmallCaliberArmsReview this is twice you've responded to me within hrs of making my comments and questions... thank you

[@SmallCaliberArmsReview]

Except for the time I'm sleeping, I usually like to keep up on comments. You took the time to watch my video and make a comment, I should take the time to reply. I occasionally miss replies to comments though.

[@jeffallen3382]

I built myself a 4x8 table for my leather working this last spring. And it's still too small! It's amazing how fast it gets loaded up with stuff.

[@SmallCaliberArmsReview]

That's what I wanted to do but I would have to crawl over it in the room where I'm currently located. Thanks for watching!

[@ghimmy47]

Paladin's holster and belt was made by Arvo Ojala. It had a steel insert to hold shape. The grip was black painted.

[@SmallCaliberArmsReview]

Thanks for the info!

[@ghimmy47]

@@SmallCaliberArmsReview He made many of the Hollywood rigs the same way. Of course, the drop holster was pure Hollywood. In those days prop revolvers like these were Colts. Too early for Italians.

[@BrianStorey-j5n]

Excellent sir!

[@SmallCaliberArmsReview]

Glad you liked it!

[@antonioflores391]

Awesome build! That curve from the loops might straighten out if you wear it enough, wouldn’t worry bout it, it came out great!

[@SmallCaliberArmsReview]

I hope so. Leather is pretty forgiving. Thanks for watching!

[@SavageMcBeastdog]

Enjoyed sir.

[@SmallCaliberArmsReview]

Thank you for watching!

[@MakerBoyOldBoy]

To stand out from the herd of 40 to 60 western TV shows a series had to have some memorable identifying item - normally a unique rifle or handgun. Have Gun Will Travel had this holster and short music intro. Still striking today.

[@SmallCaliberArmsReview]

Some day, I hope to do the holster that Steve McQueen wore in Wanted: Dead or Alive. That's another memorable one! Thanks for the comment and thanks for watching too!

[@johnscarfe]

Looks great 😁

[@SmallCaliberArmsReview]

Thanks! 😁

[@GARY-ks3qc]

VERY NICE...Once had a holster made for my S & W 686.. 4 inch..it was O.K. but not up to your standard...Western Australia is tough on licensing [ club members only] and not in agreement to wearing in public...even with np hardware...cheers for a good video.

[@SmallCaliberArmsReview]

Thanks for the compliment! You should come to the states, at least before the liberals try to change it all! Lol. Thanks for watching!

[@rebelcowboyelvis8.16.77]

I'm currently watching your video on the Paladin holster and me and my wife are currently watching Have Gun Will Travel on Heroes & icons television channel

[@SmallCaliberArmsReview]

Awesome! I hope mine looks as good as his did in the show! Thanks for watching!

[@rebelcowboyelvis8.16.77]

@@SmallCaliberArmsReview yes it most certainly does you do immaculate leather work I truly enjoy watching all your videos

[@SmallCaliberArmsReview]

Thank you, I really appreciate that!@@rebelcowboyelvis8.16.77

[@garyfairbrother5532]

Nice work! You clean up pretty nice as Paladin…should have penciled on the stash though. lol. I can still sing the theme song but as a kid was always puzzled what “Wire Paladin” meant on the card. (Probably as confusing as faxing would be to todays kids)Thanks for the entertaining and informative video with a helping of nostalgia.

[@SmallCaliberArmsReview]

Believe it or not, I am sporting the pencil thin mustache! It's almost completely white and didn't quite show up when I converted it to B&W video! I should have used some of the wife's mascara! Thanks for the comment and thanks for watching too!

[@alanmccurdy5400]

Looks good!!

[@SmallCaliberArmsReview]

Thank you!

[@stevea6722]

I remember "Have Gun Will Travel" show, my dad always watched it and I would watch sometimes as well. I believe 44-40 was a rimfire cartridge not to be confused with the 44 WCF. That is probably why 44-40 ammo is limited run quantities.

[@SmallCaliberArmsReview]

44-40 was the name that Union Metallic Cartridge company gave the 44WCF, just because they didn't want to give credit to Winchester. They are both the same center fire cartridge. Thanks for watching!

[@99Racker]

Hey Old Dog, I actually like this method better than stitching for two reasons: 1) I would use a thinner leather to revise the arch you have to make it look better and 2) if you wear or brake out a loop, much easier to replace the strap loops (I also like the idea of more than a few number of rounds if you get involved in a Serious Social Event). Trust me, you can't have too much ammo in a SSE until it is over. You also have your choice of loads, five or six rounds in the cylinder. Five because it was safer back then. Good looking rig.

[@SmallCaliberArmsReview]

I'll admit it does look good and it's much easier than sewing each loop individually. I think my OCD is what gave me the issues with the number of loops. When it comes to ammo, more is definitely better! Thanks for the comment and thanks for watching too!

[@michaelproctor8100]

Paladin was the 19th century version of The Equalizer.

[@SmallCaliberArmsReview]

Yup! Thanks for watching!

[@danes8228]

I will second your buy once cry once sentiment. I did the exact same thing as you and got the cheap slot punch for a project and cussed it every step the way. On the next project with bullet loops, I got the Craftool punch and the difference was night and day. Much easier to work with.

[@SmallCaliberArmsReview]

I'm sure there are some things that it wouldn't make a difference on, but the slot punches probably aren't one of those. Thanks for watching!

[@leroycaudill96]

Good job real close .

[@SmallCaliberArmsReview]

Thank you!

[@attilasteines1157]

Very nice 👌 job

[@SmallCaliberArmsReview]

Thank you!

[@levijackson767]

What a faithfull recreation! Absolutly fantastic work! And that Paladin costume was spot on.

[@SmallCaliberArmsReview]

Thank you so much 😀 I try my best!

[@josephstabile9154]

Thanks much for the great presentation/demonstration! A theory as to why HGWT picked 28 for the number of cartridge loops: production, always concerned with the "look" of the custumes on screen, picked 28 loops as the proper aeshetic proportion for the width of Richard Boone's torso. I'm guessing his waist ran 32-34".

[@SmallCaliberArmsReview]

I have a little more room on my belt! Thanks for watching!

[@richardbutterfoss2353]

Thanks watched all the way! RWB ❤ 🎉

[@SmallCaliberArmsReview]

Awesome! Thank you!

[@thelonemoose4718]

GREAT video!! Thanks for doing this! I am planning on making at least one "Paladin" style holster after I retire next year so this video is both timely as well as very instructive! I do like the idea of lining the belt with suede! I also noticed that you hand-stitched every portion of the holster, rather than sewing it on a machine. Is that your preference? Please keep the videos coming, you've got a confirmed fan now! Bill

[@SmallCaliberArmsReview]

I hope you enjoy it as much as I do. You have to watch out when using suede. Suede is usually chrome tanned and will attack metal. It will corrode your firearm. They used to make a veg tanned suede but it's extremely hard to find these days, almost impossible. I do prefer hand stitching, plus it's a stronger stitch. I wouldn't mind using a machine for certain things, like really thick welt areas. I do have an older Pfaff machine that would do a lot of my stitching, but hand sewing leather can be relaxing sometimes. Thank you very much for watching, I hope to be doing some more holster work this Winter.

[@JakobElbaek]

Nice one!

[@SmallCaliberArmsReview]

Thanks!

[@dabouras]

What about the single shot derringer behind of the belt buckle?

[@SmallCaliberArmsReview]

I didn't know he carried one there. Thanks for watching!

[@dadadadave100]

Very nice

[@SmallCaliberArmsReview]

Thank you!

[@jason60chev]

You are doing great work. I just notice that the top of the Holster, from the TV opening, goes up to the recoil shield/loading gate. Yours is a little lower.

[@SmallCaliberArmsReview]

Yeah, someone just pointed that out to me the other day. I recon I'll have to make a new one! Thanks for watching!

[@jason60chev]

@@SmallCaliberArmsReview if you are going to do that, maybe you can try to curve the Knight a little for the curvature of the holster? You did mention that. Wish I could do work, like that. I barely have space enough to hand load. I did use that resin -ivory material for 1860 army conversion grips, but had a guy make them. Maybe I'll get the gun back, this year.

[@SmallCaliberArmsReview]

You just have to give it a shot and accept mistakes as a part of learning. You never know what you can do until you try.@@jason60chev

[@jason60chev]

@@SmallCaliberArmsReview Hard to do with no place to do any work.

[@SmallCaliberArmsReview]

My first few were on the kitchen table!@@jason60chev

[@twentypdrparrott694]

My brother and I got the toy set of this when we were kids.

[@SmallCaliberArmsReview]

Nice!

[@jacobheard3807]

You can use thinner to separate leather glued together and reglue the leather great job

[@SmallCaliberArmsReview]

It's hard to get it in between large pieces like that and I'm not too sure the thinner is good for the leather either. I just try my best to get them right the first time. Thanks for watching!

[@oldtimerden]

I think your videos are great. One thing about the bullet loops. As to the logic. When Mr. Boone did that show he was a strapping young man with a waist of about 32". Belts were made to hold as much ammo as possible. That's as many as his belt could hold. That's about all the logic anyone can find.

[@SmallCaliberArmsReview]

Probably so. So I should be able to fit a few more on mine! Lol. Thanks for watching!

[@audreyricci6383]

Richard Boone was 40 years old in 1957 when the series started. He was slim back then but got heavier as he got older.

[@SmallCaliberArmsReview]

I'm also getting a little thicker! Thanks for watching!@@audreyricci6383

[@galewollenberg786]

I made a HGWT holster a few years ago and never did make the chess piece to go on it, but would have made it out of sheet stock and shaped it with bendable clips so there is no worry of scratching the gun, and his name can be found on tv series history websites.

[@SmallCaliberArmsReview]

I lined this holster, so no worries of the pistol touching the studs on the back. Thanks for watching!

[@greghardy9476]

I got a set of leather embossing plates from Bunkhouse Tools and used silver leather paint to replicate it. The paint doesn’t work well over dyed leather though.

[@galewollenberg786]

@@greghardy9476 A palladin avon bottle lid is a thin aluminum shell that might work, I have one but havent split it with a razor saw yet to see iif it would work.

[@bobbowen65]

Brilliant. Any particular reason you didn't dye it before fitting the holster emblem and putting it together? But still, looks great...

[@SmallCaliberArmsReview]

I like to wet mold the holsters before I dye them. Even using an Alcohol/Oil based dye, water can make it bleed when it gets wet. Sealing it afterwards will fix the problem though.

[@bobbowen65]

Ok. I understand now, thanks @@SmallCaliberArmsReview

[@HamiltonOutdoors]

Awesome

[@SmallCaliberArmsReview]

Thank you!

[@brucebissell7626]

AWESOME JOB. GOD BLESS.

[@SmallCaliberArmsReview]

Thank you! You too!

[@rickjohnson6559]

That looks better than my 60 year old belt. Do you repair and refirbish old gun belts. Of course my wont fit me anymore but it fits my son fine. Its old. Leather is like new the bullet loops are cracking. Plus my super black hawk 9 inch barrel has about an inch and a half sticks out the bottom. Do you do private orders

[@SmallCaliberArmsReview]

Unfortunately, I do not. Maybe when I retire, I may take on some projects. Thanks for watching!

[@alancranford3398]

Great video. Recreating movie props is an art, especially when there are multiple editions of a single prop. Why 28 cartridge loops? Perhaps because of Richard Boone's waist size and the esthetics of a line of cartridges. What looks pretty on screen?

[@SmallCaliberArmsReview]

The absence of a logical reason drives me nuts sometimes! Lol. Thanks for the comment and thanks for watching too!

[@alancranford3398]

@@SmallCaliberArmsReview If I remember correctly, Paladin's Colt was in .45. There may also have been a hidden holster for his derringer and may gun belts doubled as money belts with gold and silver coins concealed in the lining. I think that the prop master for the Paladin television series faked those features because of the difficulty of keeping all features functioning. Paladin had six or seven seasons and leather wears out, making it necessary to replace belts and holsters. You had enough challenges making a gun belt with cartridge loops for the tapered 44-40 cartridges. My father made a gun belt and used a commercial holster for his Colt Police Positive that he inherited from his father, and he omitted the cartridge loops because they were just too much trouble to make look right--so he tooled the leather to make his gun belt pretty. Your Paladin gun belt rig is still a labor-intensive project requiring skills and the right tools. Now that you've made it, maintaining the leather is a permanent hobby. I volunteered at an air force museum for more than a decade and some of the artifacts on display were leather goods--UV light and oxygen take a toll on leather.

[@wildchild4163]

Still on tv just watched it . Saturday on MTV . 😊

[@SmallCaliberArmsReview]

I've caught a few episodes here and there, I like it. Thanks for watching!

[@gladysman24133]

I’ve been trying to find someone who makes a good western style holster but I haven’t found anyone yet and I’m a big fan of the cross draw style! And I’m not a fan of the conchos, I keep buying gun magazines for a good leather maker but I’m still looking?

[@SmallCaliberArmsReview]

There are many out there, but they're not cheap. Have you thought about trying it yourself?

[@gladysman24133]

@@SmallCaliberArmsReview I don’t care about the price I just want a nice holster! I met a guy who owned a western leather company it was Circle KB leather! And I was going to get The owner Bret Parker to do a leather holster for me but now he’s closed his shop permanently so I’m trying to find someone else! 😊

[@SmallCaliberArmsReview]

@@gladysman24133 do you know how to get in touch with him? You may be able to have him do a custom holster for you.

[@tubes5150]

I have a question that I hope you can answer . What is the purpose of the apron ?? Is there a purpose ?? I just received 2 holsters ( I’m trying to replicate the Brad Pitt Jesse James Gun and holster set ). Jesse ( in the movie ), uses 2 “ Slim Jim “ style holsters with NO Apron . I received 2 holsters that look like “ Slim Jim’s “ , but there is a long apron behind them both . I was thinking of trimming it to just leave a 3” belt loop . ( I wish I could send you pictures ). Now will that screw up the holsters ?? Or should I leave it alone ??? What purpose does that Apron serve ?? Thanks so much for your help 🤠

[@SmallCaliberArmsReview]

I'm not exactly sure what i's purpose is. A belt loop on the back of a holster is usually sufficient to hold the holster to the person, and a leg thong will hold it to the leg if it's needed. I like the looks of them and I guess they could offer a little protection between the actual holster and the clothing. I have made holsters both ways and they all seem to function just as they're supposed to. Ultimately, it's up to you! Thanks for watching!

[@tubes5150]

I really appreciate your input . I’m still trying to decide . Cause once I start cutting the apron part ?? There is no going back haha 😂

[@SmallCaliberArmsReview]

You can always just make another one instead of cutting the one you have.

[@tubes5150]

I hope to make my own one of these days . Just need the proper tools and I’ll be off and running . I was also wondering …….. I’m thinking of dying my holsters to match my belt ( ranger style with 18 .45 loops ). Here is another question : Should I dye the entire holster including the back of it ?? ( the rough out part ). Right now ( I wish I could send you pics ).. I have a brown belt but the holsters are more of a light light brown - almost tan . So I bought Fiebings Chocolate Brown . I’m hoping that will match the belt . If it’s too dark , I may have to dye the belt . We shall see 🙏🙏🙏🙏 I finally watched this video in its entirety. I love the ending !!!!!!!!! I enjoy doing some cosplay too . I’ve been planning on doing a few tributes to a few Movie cowboys like Brad Pitts Jesse James and Jeff Bridges Rooster Cogburn. It’s unfortunate that I just shaved my gray beard so I’m starting to let it grow again haha 😂. You look awesome brother !!!! Most of my KZbin videos consist of knife reviews . I’ve been collecting knives since the 80’s . Stop over some time . Enjoy doing this . I just subscribed to your channel too . Ok. So again … If I dye my holster , should I include the suede part ?? Enjoy your day bro 🤠

[@SmallCaliberArmsReview]

I just visited you home page and subbed. You have a lot of cool knives! The only problem with re-dyeing a holster is that there may be a topcoat on it that prevents the dye from penetrating the leather. When you say the "Suede part" are you talking about the rough side of the leather or actual suede? If you mean the rough side, I'd say yes. If you mean actual suede, I'd still say yes but be aware that the color could be drastically different. Suede is usually chrome tanned instead of vegetable tanned and it also tends to soak a LOT of dye. Matching colors with existing pieces can be pretty difficult because of age, wear, and fading. Black is the easiest color to match because it's, well, black. You can also email me at [e-mail], you can send me pictures there.

[@johnt.chambers4204]

Next time you might try using a dowel or something just a little smaller than the round and not pulling the loops so tight. You can always stretch the loops a bit if you need to after you are done. That's just a thought, don't know if it would make a difference or not.

[@SmallCaliberArmsReview]

I don't know if it would help either. I really like them sewn on the belt instead of laced through. Thanks for watching!

[@deezTX]

very nice sir

[@SmallCaliberArmsReview]

Thank you very much!

[@MichaelRobertson-i8f]

In John Wayne’s last movie many of the actors who were in his prior movies were included. Includes Richard Boone along with the other great actors of the Western era, you have to include the war films of that era were many of these men served in WW2 . John Wayne tried to enlist but was in couraged to make movies about the war. He regretted never being able to serve in the Armed Services but the movies he made lead to enlistments of thousands

[@SmallCaliberArmsReview]

So, in a way, he did serve. Thanks for the comment!

[@nathanyork9815]

In regards to the 3/4" slot punch... did you dig them out at the punch end, or remove the cap and run them through?

[@SmallCaliberArmsReview]

The cap end.

[@Stuingtion]

A really nice job! I also got a suggestion for a future project, that being Colonel Woodrow Dolarhyde's holster rig from Cowboys & Aliens.

[@SmallCaliberArmsReview]

So many holsters, so little time! I still want to do Harrison Ford's holster from Star Wars, one of these days! I'll look into it but who knows when I'll be able to get around to it. Thanks for watching!

[@Stuingtion]

@@SmallCaliberArmsReview works for me.

[@CSltz]

Can't take the time to read all the comments. I had the toy set for this. It came with the cards in a business size. I can remember taking it to the base hospital when I had to get my allergy shots. What a different time that was. I have no idea what ever happened to it. But sure would like to see one again.

[@SmallCaliberArmsReview]

Every now and then I see Western toy sets in antique shops. Depending on the condition, they can be pretty pricey! Thanks for watching!

[@lindaitken3321]

I think your decision to go with 30 bullet loops is right on. In season 1 episode 12 there is a scene in which I was able to stop the recording and count rounds starting from his right side. I was able to count 17 rounds going to just behind his left hip. In another scene he was seen from his left side going back to just about where I had to stop counting in the earlier scene and counted 13 rounds. So, within 2 or 3 rounds either way, the total loop count was 30.

[@SmallCaliberArmsReview]

As long as it's multiples of 6, I'm ok with it! Thanks for watching!

[@donschafer6256]

can you make a mares leg holster? also how did mcqueen holster his mares leg without an upper support shown. even a very close up look at the holster shows no upper support loop or strap

[@SmallCaliberArmsReview]

I hope to make one some day, when I can get my hands on a Mare's Leg. There is a hook at the top, that the saddle ring hangs on. Nothing fancy, but it's effective. Thanks for watching!

[@k4vms]

FYI a manual skiver that will handle 3.5” on Amazon is $65.00 just thought you’d like to know Really enjoy your channel Ricky from IBM

[@SmallCaliberArmsReview]

I recently purchased one! (shortly after making this video) I've tinkered around with it a couple times and it seems to work pretty good so far.

[@k4vms]

What is that machine on the counter behind you for ? Ricky from IBM

[@SmallCaliberArmsReview]

It's one of the cheapest CNC router available on Amazon. I've got a lot to learn before I do any "Serious" work with it. amzn.to/3ywYSdK

[@robertmichael6644]

My Dad and I also watched Paladin when I was a kid. Unbeknownst to me the memories that were being made. Every generation seems to have its version of those were the good ole days. Nice job on making the holster. What length as a rule do you make the leg ties?

[@SmallCaliberArmsReview]

Thank you! I just measure around my leg, or grab a piece of leather, run it through and cut it to fit.

[@bobstuckrath1805]

Well, EXCEPTIONALLY well done right up to perfection. The wrinkles will come in time but, you forgot the jet-black pencil-type mustache. I'd send you one but how do I make a mustache toupee? I shouldn't have brought it up anyway.

[@SmallCaliberArmsReview]

Believe it or not, I actually shaved all but the mustache before I filmed the ending. The combination of filming in black and white and all the gray hair made it hard to see. I guess I could have used a little "Just for men" to make it show up a little better! Thanks for the compliment and thanks for watching too!

[@bobstuckrath1805]

@@SmallCaliberArmsReview I certainly appreciate all of it! From your thoughtful and high-quality works of art to your inherent sense of humor. Keep it up, Sir!!

[@SmallCaliberArmsReview]

Thank you, these kinds of comments make it all worth while!

[@Tammy-un3ql]

Love it.👌👌👌👌👌👌

[@SmallCaliberArmsReview]

Thanks 😊