If you find any unauthorized reproduction of the JSK-koubou video, please report it to me. Thank you. JSK-koubouビデオの無断複製を見つけた場合は、報告していただけると助かります。
@BJbear20015 жыл бұрын
14:47- thank you for sharing how much the project cost. That will help me plan for it. 15:15- I love the treble quality of the glass bowls and the deep quality of the accoustic wood boxes! Thank you for making both of these! I would like to do the same for my home some day! Congratulations on a great video and tutorial!
@jackielinde75685 жыл бұрын
For those who are wondering, the water bath for the piece is to keep the diamond bit lubricated and the glass cool. If you tried this without the water, the glass and bit would heat up, and the glass would shatter. Also make sure to go slow and only give enough pressure to keep the hole saw contacting the piece evenly. Also, only use bits rated for glass and ceramic. Home maintenance stores like Lowes, Home Depot, and Ace will carry these bits in their tile section.
@realcygnus Жыл бұрын
Actually Ebay was the ONLY place I've found cheap complete 10 or 12 pc(few mm to few cm+) kits. Home depot, Lowes nor even Harbor freight had more than 2 or 3(at most) rather small sizes, I'd guess for typical copper pipe/pex OD's, even "online". & the same went for even Amazon, though that was years ago now. But those diamond cup type are by far the best IMO.
@jackielinde7568 Жыл бұрын
@@realcygnus I had a set of the Kobalt (Lowe's Brand) Carbide tips. Used one to drill holes in glass pieces to hang them as wind chimes. Got to the holes in the cap, and the bit I used broke and took the glass cap with it. Chucked those bits. Have cylindrical bits now. Used them for drilling screw holes into tile for my stove. Worked great. Haven't used them on my glass projects yet.
@realcygnus Жыл бұрын
@@jackielinde7568 Yup, even carbide can do fine for stone & even on most softer ceramics, but porcelain & especially glass pretty much needs diamond. Those pointy diamond bits he showed are certainly OK, especially to reem with, though I've never seen big ones. Diamond dremel tools are nice too for certain tasks. I've cut stone, marble/granite, ceramic, porcelain & glass etc. for years, & a regular small circular diamond blade just like that on any wet saw but just for a 4" angle grinder & those cup type for drills were my main workhorses. If you need fairly large & nearly perfectly round holes, those cup type are the only practical(torchless?) way I know regarding glass. BTW, NEVER try to cut tempered glass ! I learned that the hard way, though I've since seen some vids pretty much proving its not even possible as per physics/chemistry.
@josepherwin87095 жыл бұрын
I love this design. It’s got a very high-tech look to it, and it sounds like it would be great for techno music. But I can’t not be in love with the deeper, richer, fuller sound of the wooden wave speakers from your previous build.
@thomaspigg3065 жыл бұрын
Both the wooden and the glass speakers sounded great. To me, the glass speakers sounded as though they gave a little more credence to the high end spectrum and the wooden speakers gave more to the low end. I would be thrilled to have a set of either. Excellent job young one, kudos to you!!!
@dftyfilms75225 жыл бұрын
one of the most relaxing and well proceeded tutorial ive ever watched
@justinecooper95755 жыл бұрын
I am as impressed by the creativity involved in coming up with the design as I am with the workmanship.
@FXV565 жыл бұрын
Relaxing music , profesional work , precision , great painting , quality speakers , gold plated connections Just Wow
@ionescupaul63055 жыл бұрын
cool one. one observation, the crimping of the terminals is done by putting the terminal with the opening "down" into the forming tool.
If both sets were paired with a subwoofer, I think the glass speakers would be better. They handle the high and mid level frequencies much better than the wooden ones, which are kinda muffled by the mediocre bass. You should make a nice crisp and punchy subwoofer next!
Great project! Maybe you will try to make a wooden horn, which will also come out from behind the speaker, bend down and bring the sound forward? It could be both a phase inverter and a stand. It can be made of two halves and glue them together. I think the low frequencies would have sounded better.
@jisakukobo5 жыл бұрын
Thanks for your comment I can understand what you say well. However. Production of glass speakers prioritized design.
@ABuran5 жыл бұрын
I meant to insert a wooden horn into a glass speaker. Maybe as a continuation of the project.
@thethoughtmaster5 жыл бұрын
The port will not make it perfect because glass is too hard and deflects low frequencies greater than high one's. Bass frequencies between 45 and 60 will increase, though only in the direction of the port.
@mikebennefield30545 жыл бұрын
love the warmth of the $3 speakers but the crispness of the glass ones
@gristlevonraben5 жыл бұрын
combine both! That way you have bass and twitters! very cool.
@sludgebrave37175 жыл бұрын
I like the sound of the rectangular shaped speaker body. But having a spherical shaped speaker body is an awesome project.
The horn speakers seem to have more bottom end but they also have a generously warm coloration in the midrange that may not suit your favorite music. The glass spheres seem to be more balanced, but bass-light.
@ibringthelastwords13584 жыл бұрын
Its so nice to upgrade this with rgb lights 💕💕💕
@user-bk8ue8ur9e5 жыл бұрын
オーディオオタクの人って音聞き分けられるのがすごいと思うわ
@mihusiyo45034 жыл бұрын
俺オーオタだけど加齢による劣化で聴き分け嫁さんに完敗。w 女性は年齢による劣化が少ないらしい。
@louischeung58615 жыл бұрын
great project. very impressed by your work
@CountYulith5 жыл бұрын
That wire stripper at 12:10 O_O I need dis!
@MrUltralove5 жыл бұрын
clean, simple and minimalistic working style and works. Congratulations.
Good job dude. But I think wood more good for bass
@mndlessdrwer5 жыл бұрын
Next project will have to be even crazier now. Maybe a concrete TL speaker made by casting with a foam insert dissolved out of the cured concrete with some acetone? That would definitely make for some of the most resonance free enclosures I could imagine without the need for constraining layer construction.
@clintondevereaux59313 жыл бұрын
I love the art here...amazing use of both technical and fabrication skills.
The bass does not resonate well on hard materials, it bounces off, for that reason you could put a redirection tube that points to the front, a high percentage of the frequencies between 45 and 60 will come out. Nice project though and they will sell to people who like the look.
Шикарная работа)) Но по звуку, мне больше понравились колонки из дерева (фанера?). А так - ОГОНЬ!! Творите и создавайте дальше)
@pmodd5 жыл бұрын
It would be interesting to hear, were you to fill the cavity with pillow stuffing. I imagine it would improve it considerably.
@chapzer66865 жыл бұрын
@Cross Hatch wtf
@DanLimbach Жыл бұрын
Nice video. The $3 modded speakers sound much better to me than the spheres. Better bass for sure.
@akura25 жыл бұрын
the $3 speaker definitely sounds fuller... but the glass speakers look AMAZING
@user-zf2ph9yw3o2 жыл бұрын
見た目だけじゃなく音もすばらしいですね。実物を聴いてみたいです。
@ScottieD3695 жыл бұрын
I Love the glass idea. Although I am not a fan of the frequency that glass resonates best at. While wood you can get a much lower sub level of frequencies.
@vasiliyivanishvili90255 жыл бұрын
cool glass speaker, but wooden speaker more natural!
@jisakukobo5 жыл бұрын
Thanks for your comment I agree. I also like the sound of trees. I made it with emphasis on design.
@123pantyhose5 жыл бұрын
Aluminum case is the best
@simonepg61945 жыл бұрын
the glass one in bass reflex, the other are transmission line (more performance, especially in the low)
@juststuff52165 жыл бұрын
@@simonepg6194 "more performance, especially in the low" Depends on the design, speaker parameters and the listening environment! There are some t-line designs I see on KZbin that I wouldn't bother with.
@jcweiz095 жыл бұрын
I like the sound of the fish bowl speakers because its on the warmer side and not boxy sounding.. :)
@MrTauron775 жыл бұрын
Az üveg hangszóróknak érdekes akusztikája van, de a fa hangszóróknak kicsit mintha laposabb lenne a hangja. De a üveg hangszórók nagyon szép munka amit nem sokan képesek megcsinálni. Minden elismerésem.
@StumpDrummer4 жыл бұрын
Awesome.. you have inspired me to make some bottle speakers and fish bowl speakers... I just hope they come out as good as yours do
@user-tz8uj6qo7c5 жыл бұрын
ガラスのスピーカーっていい音鳴りますよね。昔マックのボール状のガラスのスピーカーの音に感動ました。
@HLEB3705 жыл бұрын
Клас !!!! Им бы еще мягкую подсветку. Хочешь музыку слушай, хочешь как ночник включай , а можно и все вместе. А еще интересно ,как они звучат вместе с деревянными ?
@beberdaurado64175 жыл бұрын
The model of glass is very good song!!!!
@user-zt4gf1fk5k5 жыл бұрын
ガラスもいいな〜木もいいな〜
@lyedavide5 жыл бұрын
You should try the Marc Audio in the enclosure for the $5 drivers
@bryanmanalobullet22865 жыл бұрын
I think its more creative and beautiful if you put a dancing light inside the glass😍😍
@DouglaZandem5 жыл бұрын
At 3:58 , that drill stand look sick ! Is it your DIY project? Can you make a tutorial video on that?
@Maksim_Ramenskoe5 жыл бұрын
Динамики хорошие, а бас получается травмированным. А так проект мне понравился. Спасибо.
@user-fy2uy1yr7r5 жыл бұрын
Хайтечно, не стыдно на видное место поставить, но чуда не произошло, звук действительно резаный.
@thethoughtmaster5 жыл бұрын
One of the problems is the sound bouncing around inside because it has no flat sides. Not the best acoustics for an enclosure, looks nice though.
@user-nl7up5wt6p5 жыл бұрын
в деревянном корпусе лучше звук. даже через мои китайские наушники)))
@samsungsm-g900h75 жыл бұрын
Без каких либо расчётов фазика это хуета!
@user-fy2uy1yr7r5 жыл бұрын
Не видел ещё этого ролика ))) Спасибо! Исполнение отличное!
Once again, Japanese craft is proven to be top. Respect on your work but what next? Maybe speakers in marble for the low or non existent resonance? Love your work, thanks.
@michaelintile78363 жыл бұрын
Definitely a better and warmer bass in the wooden speakers (the folded horn).
@saschafunk16445 жыл бұрын
You can also install a Subwoofer in an toilet bassin. The glass speakers have an clearer sound.
@kaladar53775 жыл бұрын
The sound provided by wood box was nice bass.
@LoftechUK5 жыл бұрын
The wooden ones sound lovely 🎼🔊🔊🔉🔉🔉🔈🔈🔈
@Otho20233 жыл бұрын
Gran trabajo.! Aunque me gusto más el sonido del bafle de madera. Saludos cordiales!
@joshdk085 жыл бұрын
The wooden speakers have a very loose low end good for bass the glass speakers definitely have a tighter bass response and a shimmering high end and a good mid-range the wooden speakers almost sound like the mids are a little too high still great sound out of both speakers but i definitely think the glass speakers would be best suited all-around speaker
@luisestevesirvent29902 жыл бұрын
Buenos días desde España JSK-koubou: ¡Gracias por compartir tan impresionante diseño! ¡Internet es una hermosa herramienta!
@floritobentillo69415 жыл бұрын
Wooden speaker have more bass...great build,hope the speaker in the glass won't be falling off..and would it be more cool if its bluetooth..
@user-pt1ns5ep2r5 жыл бұрын
Сравнивать надо на одинаковых динамиках. Но дерево для акустики всегда предпочтительнее.
The stiffer a material the greater for high frequencies, wood has always been the best low budget material because it resonates bass better than hard stiff materials.
Awesome... but you should have put the bass reflex in after you put in the banana plugs and stuff... you would have had more room to work in... Nice job though
@clockmakerify4 жыл бұрын
For wooden speakers, the frequency spectrum is much wider.
@KingMinhvuong5 жыл бұрын
Very nice project. Keep it wook. Just Only question. Are you women?
@ChunkySteveo5 жыл бұрын
Gorgeous speakers. Your careful planning on cutting the glass was great to watch!
@myindiaisgreat22384 жыл бұрын
Excellent video
@FeeLtheHertZ5 жыл бұрын
Unrivaled craftsmanship - You should really be working for the likes of Apple, Bang & Olufsen, somebody.
@GLACIOUS134 жыл бұрын
Love your work as always but... ...is there some kind of structural reason that you don't rotate the reflex tubes and speaker mounts when you set them in place? Seems as if that would give a nice uniform circular finish to the epoxy. I've seen it (not rotated) before in previous projects (not just yours). This is the first time I've seen it in a transparent project though. Yes, I'm CDO (not OCD) I've the letters in the correct order!
@duttasanjiv5 жыл бұрын
ya sure I shall do it myself. Just need to find out a kitchen with those equipment's in my neighbourhood.
@colincrooky5 жыл бұрын
Excellent! Great video and very well presented with no commentary needed. Thank you!
Not as bad as a poke in the eye. It will sell for the novelty. He could easily get a bendy tube and make the bass come out the front. That is the reason why it sounds less bassy, it is pointing in the wrong direction.
@9r3495 жыл бұрын
これは本当に素晴らしい!
@jisakukobo5 жыл бұрын
ありがとうございます。 デザイン重視で作ってみました
@evanchung30255 жыл бұрын
不愧是日本人,做工細緻
@ZiaurRahmanyou5 жыл бұрын
after listening your audio I felt wooden speaker is far better than glass speaker .
@AEROWINS452 жыл бұрын
gracias por compartir, yo, escucho mejor las cajas de madera, las de cristal no suenan tan nitidas, un gran trabajo💯
@1noriko5 жыл бұрын
hi, love your builds and just subscribed. sorry but i think that you have to flip the terminals when you use the crimping tool, the pointy part should face the opening of the connectors to be able to fold them properly on the wire.
@agnaldoaraujo2817 Жыл бұрын
They are very beautiful ; but the wood sounds better ...
@eden19255 жыл бұрын
I'd use an acrylic fish bowl instead of the glass vase, I'd imagine that it'd be a lot easier.
@MrGorpm5 жыл бұрын
From what I can make out over youtube on my system (£5000) the glass speakers are less coloured by the enclosure but both are limited by the driver itself (obviously). Scaled up with good drivers I can imagine that spheres would make a very good sound.
@cross53745 жыл бұрын
専用の工具は、要るモノのホームセンターで売ってるのでコレは、良いアイデアだと思います。
@mihusiyo45034 жыл бұрын
ホールソーがもっと安いと良いんだけどね。(´・c_・`)
@kazuya7835 жыл бұрын
ガラスは中音域多めで木製は低音よりでどっちもいい味だしてる。
@fidelsasiang10025 жыл бұрын
The glass one is good for mid-high sound, the wood is best for low sound. Maybe trying to combine those two? Nice video tho