Make Random Plow fit any ATV UTV ...... Fabricating Custom Snow Plow Mounts Yamaha Rhino SXS

Making DIRT CHEAP plow fit my side by side
Wireless Winch controllers for most winches: amzn.to/3u0Nt3N
2000lb Winch under $100: amzn.to/3XuJc6p
Synthetic Winch rope: amzn.to/3u3hIHf
Carbide Metal Cutting Chop Saw: amzn.to/3Vhcx2I
After Thoughts about the Video: Sorry no snow yet to test it out BUT these also work pretty well with loose dirt, leaves, and zombies. Used snow plows are dirt cheap as generally they are seen as one machine fit. I picked this up for $25 because it sat on classifieds all winter and no one had the correct machine/application for it. I use the exact technique for mounting ATV plows to riding mowers/tractors.
SUPPORT THE CHANNEL or support the SHOP DOG's treat addiction:
Buy Ginger a new bone: www.paypal.com/donate/?hosted...
sixtyfiveford
sixtyfiveford/
Random Words: Honda Pioneer 1000 Polaris General Talon SXS Can Am Defender Maverick Outlander Renegade Commander x3 Wolverine Rhino Viking YXZ1000 x2 Rzr Razor Ranger

[@bruceaskin9645]

When putting bolts through tube , especially where strength is required , I drill slightly larger holes and weld some smaller pipe into the holes. This no only makes the holes crush proof and wear proof, but prevents water getting inside the pipe and rusting it out.

[@N.Cognito]

Hey Martha, that crazy guy down the street is plowing the street with out snow again.

[@robertmailhos8159]

She is like what are you doing under that machine daddy 😂

[@snocrushr]

My plow and my snowblower mount to the rear hitch of the quad on the back and to double hinge mounted to the front bumper. No crawling underneath the quad to hook it up and comes completely off so no brackets hanging down. quick and easy mounting and dismounting.

[@M.TTT.]

reminds me of old sears tractors

[@sixtyfiveford]

That was one of the designs I considered. Definitely a strong mounting point.

[@tblbaby]

Nice workout on that blade. You've got great abilities to go along with a great creative mind. I'm happy you make videos so we can be exposed to it.

[@handyhippie6548]

i made a snowplow for an old riding mower from a 1/3 section of a 55gal. blue plastic barrel, 5 milk jugs full of water wired to the back for down pressure and an old bed frame. it worked really well, and the snow didn't stick to the plastic blade. it did wear out pretty quick because i didn't use a steel scraper at the bottom of the blade, but it only cost some time since i got the barrel, jugs and bed frame for free. i used the deck lift lever to lift the blade, and pivoted the plow frame from bits of bed frame bolted to the mower frame hanging down behind the transaxle. the only money i spent was when i used a 3" hole saw to cut holes in the sidewall of the rear tires and filled them with bag concrete for extra traction. two 60lb. bags of post mix were less that 3 bucks each. i should've run sharpened 3/8" bolts through the tread to have ice spikes, but didn't think of it until after i filled the tires. hindsight don'cha know.

[@sixtyfiveford]

That's awesome. Some 3/8 spikes would be nice!

[@fraydnot]

Always something going on at your house. Thanks for the upload.

[@yodasbff3395]

Nice snowplow 👍, just what I need since my driveway is 800 feet long, fortunately only about 150 feet are on a steep hill, the rest is flat. I'll bet Ginger loves plowing snow with you.

[@sixtyfiveford]

The snowblower for Ginger is an endless game of catch with the flying snow.

[@RinoaL]

Even though I never really liked UTVs, my mind does a 180* when you put a plow on it. Looks really really useful. hahaha

[@JOEZEP54]

Nice fabrication . Stay safe, Joe Z

[@SmoothOperator150]

You did a fine job making that work! It’s nice to have all the right tools at your disposal 😉👍🏼

[@thornwarbler]

Belt and braces engineering that's the way to go. It's great how you do things like this in you garage not in some sterile pristine workshop with shiny brand new gear. Just like we do in our home shops. Nice work mate.

[@sixtyfiveford]

Thanks

[@davidmiller6010]

Awesome as always. Really like the the pink welding helmet. 100% OSHA approved I'm sure. How about on a future video, you rig up one of your souped-up snowblowers on a lift/mount on a rider?

[@carlmiller1034]

Awesome fabrication Moe. I am always impressed by the projects you tackle. I really enjoy the problem solving and how you show any issues you encounter along the way (and then what you do to fix them). Hope your ankle wasn't too badly hurt by the plow. Hope you and your family had a great Thanksgiving. As always, thanks for sharing!

[@sixtyfiveford]

Thanks Carl. I wasn't hurt bad but just enough to smarten me up.

[@haneyoakie14]

Hello Kitty makes an awesome helmet. Your thought process on how to engineer the project is appreciated. Anyone could have done a cheap shortcut; you took time to do it right. Thank you for great content. I hope your ankle is ok.

[@sixtyfiveford]

Hey thanks.

[@grosseileracingteam]

Hey Moe. I'm sure that's water cooled, so a heater core in a box with a blower would be great in an enclosed cab. Don't know how many times I've wished for a rig like that when the wind is really blowing. Gets pretty cold here in Michigan. Nice job on the A- dapter kit. That power angle will be nice too.

[@commoncents456]

Don't they call that a bobcat 🤣🤣

[@sixtyfiveford]

I've debated rigging up a quick heater and enclosure but time has gotten away from me this winter.

[@rodneybrand8521]

Excellent fabrication as usual..now all you need is snow..lol..would like to see more of you and Ginger at play..she is so smart..see you on the next one Cheers friend 🥂🥂🥂🇺🇸🇺🇸🇺🇸

[@mrdddeeezzzweldor5039]

I didn't know that the Evolution saw had an 'un-cut' mode built in?! Gotta watch you every minute!!! And who doesn't truly desire to have a Hello Kitty welding hood - guaranteed to help you stand out in the shop!

[@sixtyfiveford]

Lol. Just having fun.

[@Darryl603]

Cool video! Hilarious insert with the welding helmet!! lol

[@sixtyfiveford]

Safety first

[@greasemonkeymechanic1]

i really need to do something like this for my snow blower bracket, ended up welding it to my existing plow mount on my 4 wheeler but definitely needs to be easily removable unlike the plow mount i have now. thanks for the inspiration will have to get to it next year though since we are getting hammered with snow all week.

[@hansshieh6506]

Love how you are able to re-purpose stuff that most people throw away into useful tools that people would buy! Another great video!

[@KenSilvers]

adjourn for the evening, and reconvene in the morning.

[@poolmotorrepairguyFL]

Jay the Florida pool pump motor repair guy. When Service Calls Longwood approved ! that was good info 2 know /see👨‍🔧good job !! sixtyfiveford🥶

[@dg98adams]

U-bolts might make install/removal easier to connect plan brackets to the frame… but workable solution

[@levizimmerman34]

I'd like to personally thank you for the electric dryer heater video my garage is staying nice and usable this year without the loss of my fingers haha

[@sixtyfiveford]

Great to hear!

[@matstang1491]

Haven't used my plow for 3 years....utah hardly gets snow anymore!! Nice fab work Moe!

[@sixtyfiveford]

They push dirt pretty well.

[@lewiemcneely9143]

Now for some snow and to get Ginger to run the blower and after the ball too! God Bless Yall!

[@2LateIWon]

Good call on not just welding 2 tabs. It would be easier to do but it would get stuck on everything. Not only that you know they would be bent or broken off the next time you needed it

[@sixtyfiveford]

Very true. I didn't think about that. They would for sure be bent the next time I tried to reattach the plow.

[@Fatamus]

Love the pink helmet trick. 🤣😂🤣 🍺👀Look beer !

[@sixtyfiveford]

Safety first

[@Fatamus]

@@sixtyfiveford of course, of course I agree. There are only two reasons to wear safety glasses unless of course your monocular. 😁👍

[@libertarian1637]

The winch for angling the plow is a great idea that I must say I’ve never seen before.

[@sixtyfiveford]

It seams to work very well.

[@C-M-E]

Man, another reminder that I still have to build a tow-behind plow/box scraper after the garden tractor its going on is finally running. Not having a workshop with a roof sucks balls when it rains for the three days you slotted out to do the job... Think I'm going scraping for a water heater or maybe get lucky and find an expired acetylene tank to plasma the blade out of. Not without irony, all of this is to finally get the pad graded so I can build the workshop. It never ends!

[@sixtyfiveford]

Nice ideas. Water heater steel is a decent thickness and could be layered for more strength.

[@jhershy1381]

Great timing. Good design. I just got a good running 1998 yamaha 4 wheeler with a plow thats not mounted right. Ill be redoing it here for this winter in ohio

[@jameskim62]

Never ending work.... when you are skillful !!!!!!

[@walterrobbins4470]

That’s a cute welding hood

[@M.TTT.]

11:22 I was waiting to see if you'd run into this - I adapted a Bolens snowplow to my Simplicity tractor and had to cut mine like this as well. It affects how hard the corners of the blade cut into the surface you're plowing as well.

[@alsouthern7190]

Well, if i had much snow i would build one like that but i don't. Ginger is awesome

[@chox2001]

Nice build it’s going to be a useful tool.

[@ZippoVarga]

Nice one Moe! May have to revisit the plow frame to get the geometry just right while getting it to raise high enough, but we've all been there! Cheers my Friend! Zip~

[@sixtyfiveford]

I did move the little angle adjust winch forward a few inches so I could get a little more height. I think I'm around 7" which is usable.

[@transmitterguy478]

Excellent idea for a blade angle motor, I'm putting one on my Rhino snow plow.

[@sixtyfiveford]

It works very well

[@TheShadeTreeFixitMan]

Nicely done!

[@M.TTT.]

I need to add the angle change winch to my blade, great to have

[@sixtyfiveford]

It works very well.

[@bidders77]

top work as always, love your dog....such a dude!!!

[@sixtyfiveford]

Hey thanks

[@wantblackwolf]

I'm going to do this with my old atv plow but I'm putting it on my heavy duty Cub Cadet mower. The mower came with the house but I hate it as a mower so I still use my Walmart mower. It's heavy so I thought with tire chains it would be good for plowing. It's got the floor forward/reverse no gears so it should be fast.

[@Tubeagrutis]

Great vid, Moe! I didn't know you have a pink welding hood? Looks awesome! 💥💯👏

[@sixtyfiveford]

Thanks. Safety first

[@RZRDunesandSnow]

Enjoyed the video!

[@JeepITguy]

Very cool The neighborhood will love you come time to clear the road.

[@2LateIWon]

Love the pink welding helmet lol

[@sixtyfiveford]

Safety first

[@middleway1885]

Boop! Thanks for all the yummy episodes~! Lots of educational stuff!

[@sixtyfiveford]

Hey thanks

[@Fatamus]

🤦‍WHY ... Didn't I think of that? great job.😁👍

[@ww321]

You had me laughing where you photoshopped the welding helmet in. Safety Sallies.

[@sixtyfiveford]

SAFETY FIRST.

[@Fatamus]

Well the snow is on its way. 🤐

[@JackdeDuCoeur]

Nice

[@oscara.8176]

Nice helmet ;)

[@trollforge]

I think it was easier adapting a plow from a full size pickup to an S10/ Ford Ranger...

[@standbanger2]

Just a thought, would you be able to put bigger wheels/tyres on to lift it a little more & maybe snow chains would give you say another inch maybe?

[@sixtyfiveford]

Good thoughts

[@Flowing23]

👍👍

[@FJ80Coop]

I'm so lazy that I'd have built a belly plate with 2 ears that utilized the factory holes at that crossmember further rearwards behind the plows mounting ears and used longer bolts... But we all roll differently so...

[@FJ80Coop]

Then again I'd never live anywhere where I'd need a snowplow because A) I hate cold and B) I'm too lazy to wanna hafta snowplow and shovel cold wet stuff in the cold... 😁

[@jheetman]

Did you fab those cable tensioners on the angle cable yourself or or they available to buy?

[@sixtyfiveford]

I bought the entire plow as is

[@eamonnmckeown6770]

Watch it not snow all winter. lol. I'm kidding of course. Living in the mid-Atlantic we don't see too much of the white stuff. I think Utah is a little different.

[@sixtyfiveford]

I know, right.

[@macfisher4004]

Just a little disappointed the plow did not launch tennis balls.... Posting for a friend.

[@sixtyfiveford]

Now you got me thinking

[@redneckbryon]

Just need some snow, hopefully not like Buffalo.

[@sixtyfiveford]

Now that's some snow

[@TerrydeAlaska]

I wish I were your neighbor...

[@D4x4Bronc]

pretty cool when in doubt cut and reweld. Sorry to poop on your battery group swap idea. I just love group 65s.

[@sixtyfiveford]

The 65s are great. I generally just use what I have on hand.

[@not2fast4u2c]

Am I the First 😄 I like the features that blade has

[@OrinFinch]

Sacrifice him for good fortune

[@Fatamus]

Chains and couple hundred pounds in the back might help too.😁👍 Call me Mr. obvious 🤣😂🤣

[@CheaddakerT.Snodgrass]

Now you just need to enclose the cab, add a heater, a rotating light on top, a roll-down window, a pack of cigarettes rolled into your sleeve, a USB port, a salt spreader and then you're good. Nice job though.

[@sixtyfiveford]

Nice!

[@chenmengqing2457]

Our brand would like to invite you to test our products for free, how can we get in touch with you?😄

[@sixtyfiveford]

You can contact me through instagram or facebook.

[@tcapo514]

Give a man a welder and he can fix the world⚡⚡⚡⚡🌎

[@joshpoole6056]

Haha hello kitty had me spitting fluids 🤣

[@sixtyfiveford]

Safety first

[@josephanthonypuccio4704]

I love your videos…you are great at what you do…. But G-damn honestly do your neighbors hate your guts??? If I was your neighbor I would….. get a new place on your own acreage is what I’m thinking… good stuff though… keep it up!!