Bead Roller Dies EXPLAINED!! How to Choose the Right One For Your Project - 10 DEMO’s Best & Worst

On this episode of Make It Kustom, I give you the full run down on all the different types of bead roller dies and demonstrate the best, the worst and my favourites. I explain tipping dies for straight and curved flanges, stepping dies, beading dies as well as radius and round over. I also show you one of my favourite techniques for a Diamond tuft/quilted look.
Shop merch and hammers here:
www.japhandskustoms.com/shop
If you're interested in donating to support our channel:
www.paypal.com/donate/?hosted...
Chapters
0:00 - Intro
3:09 - Tipping Dies for Straight Flanges (DEMO)
7:01 - Tipping Dies for Curved Flanges (DEMO)
9:48 - Tipping Wheel for Artistic Beadrolling
11:52 - The Basic Bead Roll (DEMO)
16:53 - Finishing Bead Roll Ends w/ Punch Tool (DEMO)
18:51 - Fave Eastwood Forming Dies for Basic Beadrolling (DEMO)
20:18 - Stepping Dies (DEMO)
26:44 - Fave Eastwood Stepping Dies (DEMO)
29:56 - Diamond Tuft / Quilted Pattern Techniques (DEMO)
36:27 - Round Over Dies (DEMO)
42:06 - Radius Step Roll (DEMO)
46:27 - Radius Step Roll on Flat Edge
47:40 - Outro
#MakeItKustom #japhandskustoms #kustom

[@fitzeesfabrications]

Love learning new things. The under sized lower bead is a very cool idea. More great info. Keep them coming.

[@stevemiller1212]

I have learned alot from you also Tony and wanted to say thanks for the awesome Canadian content.

[@jodycollins7326]

I’d like to see a collaboration video with Fitzee and Karl Fisher. I know you are on opposite sides of the country but it would be cool.

[@chuckkellogg2404]

Love your vids too. You and Karl are my go to guys on youtube!!!

[@olasod1]

Thanks for your videos. As Im from Sweden Lazze has been known since I was a teenager (55 today). Ive seen all his videos, but since I found your channel you are my ”go to”. I still grade Lazze and Ron as the best sheet metal guys out there but your videos gives me alot more. And you also seems like a great buy. Keep on doing what youre doing. Thanks from Skellefteå where we now have aprox -15 celsius and 10 cm of snow. 👍🏼🍻

[@markstearns2980]

An open end wrench of the appropriate size also works for finishing the ends of your beads. Lay the wrench flat at the end of the bead and smack it with a hammer. Works great without building special tools:-)

[@charleskish8606]

Karl Thanks for taking us to school. You are a very good and solid teacher with your grasp of the subject and your clarity of explanation. The camera work is right on and Christine knows exactly where the eyes need to be focused, Thank you for keeping us old farts in the front row of class. Merry Christmas to you and your families. Thanks again Charlie

[@MakeItKustom]

Thanks very much Charles! Merry Christmas!

[@danielbuckner2167]

Man, you are too kind for giving away the secret sauce on dies and keeping newbs from wasting their money. Too cool! I hope Santa brought you two some good health for your families and some good swap meet karma for parts buying!

[@MakeItKustom]

Ha ha Ha swap meet Karma is my favourite thing to receive!

[@geoffhaylock6848]

The hole punch to end the beads is a really nice idea. Thanks for sharing.

[@robdoggerful]

Time is my hurdle. But your stuff is great. Sometimes I have to watch as I'm experimenting my self.

[@chriskappes9170]

I pnce had a math teacher like karl when he explained it it just made sense when karl exains things it all makes sense thats why i watch all his videos thanks again im working on getting a bead roller now so this was very helpful

[@paulnewton943]

I often rewind and playback 4 or 5 times to try and catch the dies you are using. Great content as always matey thanks

[@1fknhpycmpr355]

Merry Christmas! Only thing that is seriously wrong with this video, is that you can give only one like for it. Keep up the good work!

[@MakeItKustom]

Merry Christmas thank you very much!

[@fawcusfitness]

Glad you mentioned KMS! As a Canadian I have been shopping there for over 20 years. Great content. Look forward to learning more. Subscribed!

[@bjlanders]

I have watched this entire video, front to back, twice.......once before motorizing a brand new 36" throat roller, and then again today, before trying it out for the first time. Inspiration, and refresher!

[@mreyes3591]

Been busy today I wanted to wish you and your wife a very Merry Christmas

[@glassblastcollision]

I took the die and turned it in the drill press and radiused the rollers edges with a flap wheel on a grinder so they don't dig in work amazing! I made my punch from a socket and extention.

[@joshm8661]

Always learning anytime i watch your videos and I'm not even a metal guy but still enjoy taking in the information you teach

[@darrinegleston6372]

Great video. Love the content. It is nice to see the various dies used and the associated contours and the tips on how to best use the dies.

[@Studebomber]

I can hardly wait to try some of the stuff you are teaching. Thanks Karl!

[@MrRoscoj]

Love the video. Thanks for sharing! I can’t wait for the build video on the bead roller

[@surreal_custom_cars]

An awesome use I've found for the steel flat bottom die is team it up with a top beading die and run over your lines with them first like a small English wheel and it pre-stretches the area and the reduces panel distortion and warping, have you tried louvre dies? I wonder if your gasket punch idea would work to clean the edges of them up too Great vid Karl

[@MakeItKustom]

Yeah that’s a really great idea! I have not tried louvre dies

[@wrongwaygarage]

A perfectly timed, excellent video, sir!!! Thank you so much! 👍🏻

[@jerseyshorefabricators7431]

Great info and liking the flaging dies. Awesome job as always.

[@randyrhine9896]

Thanks for the demonstration with each die! Much appreciated!

[@billmiller7138]

Thanks for taking the time to make these vids to share the info!

[@mikepelelo5657]

Very useful information. Thanks to you and Christina and have a Merry Christmas and a Happy New Year.

[@glenmiller3783]

Great demonstration, really looking forward to the video on building the bead roller

[@LooseGravel14]

You do the BEST videos. Thanks!

[@normanshepard5914]

You do a great job teaching how to do all this custom work!!!!

[@ronmiller682]

Loved the video, alot of information in this one. Thank you for sharing

[@rickdarr5323]

Thanks for the tips..... love the show! Time to KZbin to the east and watch Chad. Happy Holidays.

[@rasmuskruger3179]

Excellent tutorial, well explained and easy to follow. Good onya. Thx for the video

[@chandurasika]

A video i've been waiting for... thank you so much

[@scottwilliams997]

Awesome video Moved ahead on my learning curve. Please keep videos coming....

[@charliewhitlock6210]

Love your videos so much info makes me want to give it a try i think bead rolling looks so cool thanks Marry Christmas bro!!!!

[@kenhomeier8629]

Nice video. Great breakdown of dues and their application

[@pedroluken3177]

Great information! Thank you! Merry Christmas!

[@johnnylom9915]

Great Video as usual. Merry Christmas and hopefully a much better New Year to yourself and Christina

[@Ozarkprepper643]

👍 appreciate your time sharing knowledge. And the expense of your test panels did not go unnoticed. Nice editing your camera angles remain focused on the task at hand. Also appreciate that your music does not dominate your speech. It stays in the background where it should. 🤠🐂🏞️

[@user-yx5nd8fr2w]

Great video! Thank you for sharing this.

[@bubbayesir7647]

I’m looking forward to seeing you make a bead roller. Excellent video. Thx

[@black88coupe]

Unbelievable video. HUGE amount of info on this subject for a rookie like me. THANK YOU!

[@christopherbell5249]

Excellent demonstration, so informative and understandable, thank you.

[@mako757]

Boom! another amazing lesson thanks! Happy Holidays

[@stevemiller1212]

Another great video . Hats off to awesome Canadian content.

[@1979gmcummmins]

Awesome video! Thanks for doing these.

[@stevemiller5525]

Another great learning video! And a very Merry Christmas.

[@walterabraham5367]

Dude you rock. I learn a lot from your channel. Well done.

[@bigbird2100]

Great video 👍This is the way all teaching videos should be made thanks again!

[@davidfalconer1639]

Wow that was a good learning session. THANKS from Australia.

[@RGVJ21]

Great, now i NEED a bead roller. Another fantastic lesson, thanks again mate.

[@michaelsfabwork2985]

great video and info thank you very much. I learn a lot on your videos. Keep up the good work. Take care and stay safe.

[@davidcastanedajr.1268]

Thank you for sharing all of your talent and your trial and error experience so that we can have a less frustrating experience fabricating and purchasing new equipment. Stay Awesome Karl !!!

[@danawick9817]

That's pretty cool you certainly know your stuff that's why we watch you and learn from you. Merry Christmas

[@TBS_Machine]

Great rundown on the proper use of the bead roller dies Thanks and Merry Christmas !!

[@sdcaclint]

Hey I wanted to show some appreciation for what you two are putting out. I look forward to your videos. I hope you two have a great holiday season. Clint

[@Bigskyguy56]

Karl, Thanks for going over the difference in dies. As always , your clear, concise explanation makes the learning enjoyable . I appreciate you passing you expertise along to us. Merry Christmas & Happy New Year to You & Christina. Rick

[@johnmatthews2198]

Hiya great video, thanks very much for taking the time to share your knowledge with us. I hope you both have a great🎄 Christmas & a fantastic New Year 👍

[@manuelmiranda427]

Fantastic tutorial in bead rolling!

[@HarryDemler]

Very informative, thanks for all of the pointers, looking at buying a bead rollerand all of these tips were very helpfull

[@fredgillick3071]

Hey Karl, You would make one hell of a metal's teacher. You have a lot of knowledge and skills for a young man. I enjoy your channel and wish I was a young man again. To learn from you to work on projects again. Merry Christmas to you, your wife, family, friends and all your subscribers. Hopefully we all have a Healthy New Year.

[@MakeItKustom]

Thanks a lot Scott and merry Christmas and happy new year do you and yours

[@J_R_Shop]

Thanks for the die demo Karl! 👍👍👍

[@chloesodomire6505]

You rock. Just started with a Eastwood beadroller..lots to learn..you definitely enlightened me.

[@MrScrapart]

Great video Karl! Thanks for sharing, learning something new everyday! We all must Propagate the Knowledge. Rock on Brother!

[@papatomsgarage7611]

Great illustration, thank you!

[@misterfixit1952]

Thanks for the info. I have a HF bead roller that I bought for doing for furnace ductwork and this adds a whole new dimension of possibilities to the tool. Also, I have a lathe to make my own dies or modify existing ones.

[@cowfrank]

Just purchased the same shear. It is wonderful super smooth operation.

[@northernoz]

Great walk through. I have so few dies that I don’t use it that much but will now

[@biglakehotrods381]

No matter the tool, every person has a way of interpreting its use. Some pretty straight forward, some can be super creative. I’ll sure be following when you make that bead roller.

[@tinsmith4540]

Hi Karl, look at the last set in the beader, turn around and look at the belt line in your pickup, turn back around and look at the dies again.Could you not do two passes and make a wide, maybe tapering belt line for a door / cab corner with them?

[@MakeItKustom]

For sure! Bead rolling can achieve many shapes. Guys are even 3F printing dies for custom body lines

[@Georgiaguntraining]

Excellent, as usual. Thank you.

[@dhansen7235]

I watched the whole vid, the very last one was what i needed and it was the shortest, thats ok everything was informative and i learned.i hope you play with the last set more , thankx for that!

[@derrekjohnson2919]

Another great video. I agree with your favorite dies as those are pretty much my go to dies. I do use the urethane lower die more with my tipping die. I love Lazze as his videos are what got me interested in sheet metal manipulation.

[@rockypergin2216]

Very interesting! The differences and the pros and cons! Thank you

[@michaelguinn5736]

Morning Karl, wow, everytime I watch one of your videos I learn something, I like how you take the time to explain....be safe!! God Bless!!

[@ryanjameson2036]

Can’t wait for the bead roller build!

[@johnmathews3027]

Great video Thanks for sharing Merry Christmas to you both

[@earlwilson9081]

To you and your wife have a Merry Christmas and a Happy New Year I look towards watching more of your videos in the coming of the new year stay safe

[@0lddragracer426]

Thanks as usual Karl. A Merry Christmas to you and yours. I hope the coming New Year brings you great success.

[@gregorycatren3442]

Merry Christmas to you and your wife Karl. ,and wishing you all the best for 2022...

[@theunravelers3995]

Thank you very much for this video, will be purchasing those Eastwood dies soon

[@jamesbruno5896]

Great info! Merry Christmas guys!

[@SteveNielsenArt]

Great video. The past 6 years I've been using the Mittler Bros 36" with a variety of their dies to add more detail to my sculptures. It's nice seeing different brands and profiles compared. Also like your modifications you've done on the lathe to avoid track marks. Great tips and information for anyone at any level.

[@paraglidingprospector]

Great stuff! Thx for sharing your skills!

[@Karkmotuning]

Nice demo on your bead roller dies and how you use them. Not too long till I'll start making the floor for my rod, so this added to my inspiration. Thumbs up!

[@Thomas-ts2gl]

Thanks for the info... and Merry Christmas to you and your wife!

[@flatworm00]

Great tutorial. I learned a lot, thanks!

[@W.H.Slater-49Fordlightning]

Merry Christmas to you two. Love your content very informative I learn something new every time and I've been working with all different types of metals for quite a while.

[@WaynesGarage]

Hey mate love watching your channel as well. Now I hand make alot of penals and have learned that before you put your bead roll into you metal by stretching it in the English wheel with a higher radius lower wheel on your English wheel as when you put your bead roll it pushes the stretched metal down so it takes away alot of the wrapping of your penal. Cheers mate Wayne

[@michaelosborne513]

Great video on dies ,Merry Christmas may God bless you in the coming year

[@geoluttig1572]

Great job! saved us (that are new to using bead rollers) a ton trial and error leaning.

[@marty3469]

Great lessons with what dies can mix with others etc. I was thinking with my set that I could taper off where the tracking happens with my lathe. I never did cause I thought they were hardened steel... The possibilities are endless 👍👍

[@gseyank100]

This was a good educational video. Thanks.

[@adamengland2519]

Thank you again. I learned a lot from this.

[@YerluvinunclePete]

The camera work on these videos is awesome. Getting in at all the right angles makes this really stand out above most other instructional style videos.

[@YerluvinunclePete]

Dude puts out well thought out advice but being able to really see what he's talking about kicks it up several notches.

[@slapoutindixie7537]

Lots of newbi info … thanks !!!! Makes it a lot easier 👍🏻

[@IronHorseGarage]

Some great information and tips sir!!!

[@rossokeefe9268]

Jamie Jordan and lazze are unbelievable..yeah man get to that bead roller build..I plan on making one.

[@johnbernstein1127]

Always illuminating!

[@billd.akaevylaz754]

Great video. That Radius Step Roll die looks like it would be perfect for putting the body line in the bottom edge of Model A doors.

[@johnhunt6992]

Thanks Carl. Just starting to get serious about bead rolling, so perfect timing. Loving the content, and awesome new workshop fella.

[@cuarlosabatcardonagarro8951]

Buenas tardes seria tan amable de darme un numero de telefono para mejor comunicacion muchas gracias amigo

[@marnick27]

have a merry christmas and a great 2022 and success in the new chop