"Metal Shaping 101: How To Use a Hammer & Dolly For DENT REPAIR!!

[@jamessellards2900]

Can't believe I just watched 47 minutes of a guy hitting a fender with a hammer, but man am I glad I did. Those tips and tricks are so valuable. Thanks again.

[@stanleytolle416]

I really love it when you show how to fix metal damage with tools an average Joe/Jane can obtain.

[@kellywilliams5086]

Okay, I’m impressed. That doesn’t happen too often on here. The way you explain without rambling on and then into talking about your mothers uncle twice removed that nobody wants to hear about is not notch. You sir have earned another sub…

[@stevesloan6775]

If sharing is caring, you win the internet for how much amazing knowledge you share. 🤜🏼🤛🏼😎🇦🇺🍀🍀🍀

[@everwolf7727]

I really, really love the background music used here. No rush, just calmly explaining the process Such a nice vibe!

[@MakeItKustom]

Glad you liked it!

[@michaelhayes9335]

Lost my Dad a few years ago. He was an old school metal finish lead repair body man. Watching your videos reminds me of home.

[@martinmessersmith2900]

Not only are you fixing stuff, you are explaining how to do it, and even going into the details of all the little tricks and indicators. Your skills are amazing - very impressive and a joy to watch and learn.

[@3v4nm33]

Literally just bought my first hammer and dolly set, then your notification came up, I'm subscribed.

[@MakeItKustom]

Right on man thanks for subscribing!

[@jasonmaes6021]

Definitely a good place to learn because he explains all his techniques in detail and the results of his methods are obvious.

[@steveaguinaga3821]

Yup. Good learning and motivation. 👍

[@lazyhoundracing9621]

Great video with no family drama and nobody crying and stomping out of the shop. The way you describe the process is very helpful. Thank you for your time.

[@MakeItKustom]

You’re most welcome! Ha ha I don’t get it when that type of content is necessary.

[@richardsink9198]

We have all seen the Dog whisperer. Now We see The metal Whisperer. Always great content and never ceases to amaze! I love it!

[@mikeuhlmann6825]

You Sir are a master teacher. I`ve had a hammer & dolly set 35 years ago. Couldn`t get anything done with it and scrapped it. Your videos made me order a second set and gave me hope. Thank you!

[@rdspeedfab]

Multiple camera angles, new cameras, good editing… love it you guys. Keep it up!

[@biryaniofbodyhair]

this is the actual show I always wanted to see on discovery as a kid! I used to watch all this dramatic bullshit for maybe if you were lucky 1 minute of info, whereas this is gold from pillar to post...so good man! much thanks to you and the crew

[@MakeItKustom]

Right on! Thanks for that ! That was me as a kid too 👊

[@biryaniofbodyhair]

@@MakeItKustom awesome man! 👊

[@Vangabonders]

Dude, that is so relatable lol

[@ZenRacingForza]

I can thank you enough for teaching me soooooooo much. It’s the simple things like prying against vise grips that seems so simple but overlooked too many times by myself. Looking back that little trick would have saved me tons of time. CHEERS BROTHER - RESPECT

[@Downstairsish]

I just repaired my neighbours Sprinter van... he took it to three bodyshops and they all put down for new wing, bumper and headlamp. Cheapest quote was £3'500. I repaired everything and charged him £800 and it all came out perfect. I'm an old school panebeater. nobody is properly trained these days and its always replace instead of repair.. Great video Karl, you show perfectly what can be done... I think things are going to change, goodbye throwaway society.. I will update you soon on my 41 Cadillac Coupe. best wishes from the UK

[@MakeItKustom]

That’s a really nice thing you did for your neighbor!

[@matthieucorbeilwalsh]

One of my favorite videos. Really liked the format (borderline ASMR, background music) and the simplicity of the tools used. Detailed explanations as usual. Love it ! This lifeless after market fender now has a story stamped into it. Thank you for sharing this with us.

[@MakeItKustom]

My pleasure man! I’m pretty stoked that the fender is saved and a hammer and Dolly video is born lol

[@lt1nut]

ASMR and imparting knowledge are two extremely different things, having them compete against each other, simultaneously, is *NEVER* a good thing. It is easy to accidentally *abuse* the viewer when combining the individual "power(s)" of audio and visual. Video is so much more than the sum of it two main inputs, THAT is what makes it possible to be utterly compelling to produce AND consume. When the art and science skills are combined "magic takes place"; use it responsibly and judiciously for it resides at both ends of the good-bad spectrum. *Background music/noise/sound matters!!!*

[@lancemclean9273]

A little time and a positive attitude saved a scavenger hunt for another fender . Excellent

[@geneschaffer4123]

Just want to tell you Karl & Christina something that I noticed is that your channel’s quality improves continuously which keeps me watching. Thanks you guys cause obviously you read and listen to your subscribers and you, caring , really stands out.

[@raymondw7875]

Real world stuff right there. It's not all flashy new parts that cost more than most people can afford. I truly appreciate how down to Earth you keep things.

[@billyself2743]

Great job I’m 70 years old and your never to old to learn more every day thanks a lot love your video’s

[@davesmith8936]

Oh Karl. I've been there. I'll bet your were just furious with yourself for damaging a NEW and irreplaceable part like that fender. But talk about making lemonade out of lemons! That was one of your best videos yet! You are a REALLY good instructor and I learned SO much. Thank you for showing us how to fix something like that. You are doing GREAT work sharing your knowledge. And please do the video you alluded to on how to make that fixed dolly stand and one's own dollies!

[@stephenlewis3350]

Hey Karl, you are not only highly skilled but are a natural teacher. Thanks for another very enjoyable and instructive video.

[@flyweldfabricate]

Love how you have the tools to do it faster but teach how to do it with hand tools

[@Studebomber]

The more you watch the more you absorb. Thanks for giving basic techniques anyone can learn. It really helps having someone who knows what they are doing demonstrate. Keep up the great work Karl!

[@MakeItKustom]

Thanks a lot Brian!

[@theunravelers3995]

You videos have been so beneficial in aiding me on my 55 Chevy build. My co worker is highly skilled like yourself, and has been helping learn to hammer and dolly. But having your videos to fall back on and having real time examples are invaluable. Thanks Carl!

[@deankay4434]

You what you got, make the rest, never pass a garage/yard sale. I like it! The combo shrinking stump with some nylon (They are sold as cutting boards). My favorite was at the end when clamped in, “Looks better than I thought and fits” out loud but the inner voice we can’t hear was Karl “After I ran over it and dropped a frame on it”. I shop owner teaching me in the 70’s said, “If you are not making a mistake, you are not doing much! DK, retired ASE M

[@longsspeed]

Out of all your hammering videos this one made me understand it the most. Thank you

[@larryreece1403]

Great Practical video! Brought back a lot of good memories fixing stuff just because you can't get what you need! Anyone who has never done hammer on hammer work is either not a guy who does any work, or a liar! Really enjoyed this one!

[@MakeItKustom]

Right on! Glad you enjoyed this one!

[@KFitzG35competitor]

Body shops in my area don't repair dents anymore, they only replace. Nice to see someone still does this type of work.

[@78fenderPbass]

You look like you're enjoying yourself which tells me you're doing your life's work. Sharing valuable knowledge and having a good time. Life is good. Thank you.

[@ericthered976]

So enjoyable watching your craftsmanship and attention to detail. I don't even do metal work but can't wait for your next video. You seem so young to have such a breadth of knowledge and your teaching approach is great. Thanks

[@1Montys]

I came across your videos by accident and have spent the past few days watching them with enjoyment, your work is amazing and very informative, you are very talented and i look forward to watching more of them when i get the chance, yesterday i made myself a slapping hammer from a piece of flat bar, and today i made a dolly from an off cut chunk of steel for my collection which was motivation i got from you, also the camera work is excellent. Thanks a lot.

[@jasonbose3507]

AMAZING INSTRUCTOR SKILLS!!! Keep up the good work that you do, the fans love it!!!

[@MakeItKustom]

Thanks Jason!

[@JerryWick]

Ive tried watching a few videos on proper hammer and dolly usage, and this on by far is one of the best ive found. Im a novice at it and when you get the hang of it spending some quality time tapping low spots out of a panel sure is relaxing and rewarding work. I like the home made slap hammer, will have to find a thrift store file and make one myself. Great work!

[@charlesturgeon2101]

nice job love the filming you really deserves more recognition for all the teaching you doing and the passion that we all sharing in our project

[@MakeItKustom]

Thanks man I appreciate it!

[@Rick-O-Shay60]

Yes sometimes having a stationary dolly to rest the work piece onto while massaging it back to form is a tremendous help when you could use a third hand. Thanks Karl, always interesting, and informative videos while fun to watch.

[@billd.akaevylaz754]

Best video since the 40 Willys hood video that got me hooked on your channel! I love watching dented panels get put back in shape.

[@DriftingDragon74]

I'm an auto mechanic with 30+ years experience and by no means am I a body repair guy. I have an inductive heater for siezed nuts and bolts. It works absolutely amazing. My point is that you can buy all types of attachments for this tool and one attachment I bought is a panel heating pad. I have used it to heat dents, dings, and creases and then hammer them out with various hammer and wooden hammers I've made over the years. Now I have never truly been concerned with paint finish or any real technical issues but heating the metal with that inductive heater has really stepped my abilities up. It actually makes the outcome look like I know what I'm doing. I'm just curious if you or anybody here in the comments has any experience using one, and if not I do suggest trying one as it has worked for me a complete novice.

[@kmac4124]

wow , dude you opened my eyes ...i could actually understand what you were saying....dude you are a good teacher !!! thank you !!!

[@johnmcclain3887]

Your camera work is excellent, the person is quite good at aiming at the details, and your explanation as you work is quite valuable, I've watched it done many times, doing other work, and have learned quite a bit from both the video and the narrative explaining your thought process. You have great patience, and your selection of music is quite soothing, and in keeping with the work. I really enjoy seeing the metal "bend to your will" and take its proper form.

[@jimgordon3274]

This is why I watch this channel, Informative and a full explanation that covers what's next in the process. Look forward to the next one

[@praetorious]

This simple video has been great, It's my favourite on den repair. I think it's more instructive than the Willy's hood, in that the damage is small/less complex, so easier to grasp> The best part is you explain what you are doing with the hammer and dolly, and show us what to look for, and what to listen for with each blow of the hammer, and different types of damage. Brilliant, more please!

[@rockypergin2216]

Now it looks much better! Having the knowledge of how to attack a damaged panel sometimes can be so satisfying! What to do first sometimes is the hardest choice!

[@MrLangleylad]

Nice work Karl , throughout this video I was thinking wow Kristina has taken her filming and production to the next level !!! Surprise surprise

[@MakeItKustom]

Haha it’s a bit different format

[@vintagerustmotors411]

Thank professor, another valuable lesson! Seriously thanks for taking the time to show us how it’s done. The filming and editing did look great too. Can’t wait for the dolly stand video. Cheers!

[@WebWheeler]

I feel like i'm watching the Bob Ross of metalworking right now (does Canada know Bob Ross?) "Here's another happy little dent... we're just going to give him a little massage with our hammer and dolly." You make it look simple with your step by step explanation but you take a step back and it's actually a work of art. Incredible work with the metalworking and the video!

[@bradmaas6875]

Brought back an old memory, my dad had a '68 Datsun 510, he got rear ended. I got into the trunk and pushed it out with my knees. Using an assortment of household tools, claw hammer, sledgehammer, splitting wedges, screwdrivers. No Bondo, certainly not perfect, but he was happy as hell to have his trunk back.

[@peterpowell4821]

Appreciate the noticeably absence of time-lapse on this video. Please consider using less time-lapse on other videos. I know that it's necessary sometimes in order to condense the video time but I find too much to be quite annoying. Thanks for taking the time to describe the thought process with which you approach each area of damage. Great job Karl 👍

[@MakeItKustom]

Thanks for the feedback Peter! I’ll try and have more real time footage

[@MrKidsparky]

Slow is how this sorta thing is done which should clearly be the point being able to learn from this video.. if you want to appease persons with no attention span maybe make another condensed version but I thoroughly am stoked to see the grind so as to know what I might get into and what it takes to make it quality.. otherwise like you’re saying.. aftermarket .. this also isn’t a fast or sped up process to begin with …. Which is why I appreciate that you took your time to show us how to do it properly with real time and theory versus a jacked up TikTok video with edm that left my head spinning and still knowing nothing .. I’ve watched most all your videos .. thanks for the educational manner you’re taking that one can actually learn a skill.. skills take practice .. practice takes time

[@juniorsicko1813]

Powell is best to shut it pal, your quite annoying throwing that on the comments.. keep that shit to yourself, video is great!

[@Breadonez]

Watch it in slow speed on KZbin

[@fishhuntadventure]

Once you see the idea, I don’t see the point of watching 20 minutes of realtime hammering or 30 minutes on an English wheel. At that point the only learning to be had can only come by grabbing a sheet and working it through with your own hands on your own tools. I already watch most of these at 1.5x so using up more time in a video would be an unwelcome waste of time for me. I think there’s a reasonable balance a lot of the time- making long drawn out segments out of repetitive hammering will achieve nothing with about equal benefits to watching an hour-long video of paint drying, orbital sanding of a stack of pine boards, or clouds passing overhead. The production is what it is; I’m not asking for shorter videos; I’m not his only viewer. But I surely don’t want longer videos filled with mundane tasks. Besides- and I haven’t looked- I’m sure there are plenty of videos out there of clouds passing overhead. @MakeItCustom

[@bluesman6955]

Thank you for making an excellent video. I appreciate that the music did not detract from the content of the video. I wish more you tubers would follow your lead!!!

[@jtdyalEngineer]

another great video! Absolutely fantastic camera work and editing. This may be the most rewatchable episode because of the content. A lot of us fear getting started on something like this. Again you make it very approachable thank you.

[@MakeItKustom]

You’re so welcome thanks for the feedback! This would be a great video to save to keep in your back pocket when you need it cheers John!

[@jsshayes1]

I recommend "The Key to Metal Bumping" book. It really helped me to understand how to work out dents.

[@brettbresnan7078]

A video on making a stationary dolly and the accessories would be great. Your videos give me enough insight to have a go. Thanks

[@drummer0864]

Thanks a lot. I know how this works is watch closely and go practice a whole bunch. Everybody seems to have their own approach and style on how to accomplish what you just did. Tried this several times, but never came out as good as yours did

[@mattewiegand9896]

Thanks for keeping the skill out there Karl. I think we all appreciate you sharing it with us.

[@lloydbutleri5951]

Rr I’m B

[@MakeItKustom]

Thanks for watching! I love sharing this stuff.

[@simonhall8109]

Really enjoy seeing a tradesman at work very interesting and entertaining Thanks Guy’s

[@lukesmith3778]

Absolutely spot on video from start to finish - just can't fault it. Great job and thanks for all the tips!

[@MakeItKustom]

Thanks Luke much appreciated!

[@davidcrouse2625]

Regarding hitting a hammer with a hammer... While it's good advice for occasional hammer users or novices not to hit a hammer with another, you are a professional and understand the dynamics of what you are doing. You understand the physical properties of the metal that hammers are made of and compensate for the possibility of shattering by using a soft face hammer. This is called INNOVATING! I personally would do the same thing. The cross peen hammer is the perfect force director for what you're doing. Keep innovating!

[@MakeItKustom]

You definitely get it David! Once you’ve worked with tools long enough you definitely know what they can and cannot do. Cheers and thanks for your support!

[@jrodpadilla22]

Recently, found this channel and I love the content. Thanks Karl for putting out real content that is useful to people. Very useful information for me!

[@trentonx137]

Not even half way through this tutorial and I've already learned lots of useful information. Thanks a ton and keep being cool man.

[@t.e.1189]

Hello Karl, I want to thank you for the few videos of yours that I have watched. They answered several questions I had for doing body work I've had for a long time. They are very educational and you are a good teacher. And what I really appreciate is there is no loud annoying obnoxious music blaring away while you are talking. In fact, I really liked the music and the low volume you kept it. I think this is a first for me. I come to KZbin to learn and so many youtubers just don't get it. If you quickly turn off your audience by being obnoxious you have lost your audience and it really doesn't matter how much one knows, if they alienate the listener they haven't successfully taught them anything. My first love is working with wood, but I have an interest in any thing that involves using ones hands. I have a high regard for those who have fine tuned their craft and love learning from them, even if I may never use what I learn. Thank you so much for sharing your knowledge in a way that is enjoyable to receive.

[@r1lark]

Karl, GREAT GREAT video for us novices that are just learning to use body hammers and dollys. I like how you didn't use any of your fancy tools to do these repairs, just basic hammers and dollys. Also liked how you showed us how you improvise, like you said, use what works. I picked up a lot of good info. One thing I recognize after watching this video is that I'm using body hammers with too much of a crown when doing dolly on hammering (plannishing). I like how you showed that very small damage can cause the oil canning effect. Would love to see a video on shrinking to repair an oil canned panel hint, hint :-)

[@JaredBoduch]

When it comes to teaching, you and @fitzee are killing it! Thanks for the education.

[@123ABC-Machine-Basics]

Carl you are truly a gifted Artisan ! Thank you for making videos to share your knowledge!

[@rickmarquart3277]

So satisfying watching Karl work his magic! 😎👍🏼🇺🇸🇺🇸🇺🇸

[@SeanIUOE150]

Great content, information and explanation of the work process from start to finish. The humility and skill you have are what make your channel phenomenal! Keep up the good work!

[@markschaff9503]

Best tutorials on KZbin, hands down! Thank you for taking the time to teach these priceless skills

[@andrewmacdonald4833]

Thanks for this...patience and an expert eye help a lot. I've got a mangled fender from a 11T Ford that needs a heap of tlc...so this will help a lot.

[@fernandosaavedra3448]

so grateful for such quality instructions on this video !!!

[@bruceclingerman2772]

Hey , We All have several ", Vice Grip Pliers & the best thing I do to them is to weld a "Lock Washer" on the adjustment screw! Usually I use a 5/8". P.S. it also is great to hang them on your Welding Table!

[@1fknhpycmpr355]

This video reminds me of the book i bought from ebay yrs ago.The key to metal bumping, first edition of that was printed in early 50's and they are still selling it. All the info you can get out of that book is gold and its a same thing with this video. Keep up the good work!

[@MakeItKustom]

You know I ordered that book and it never came lol I definitely need to buy it again I’m sure there’s some great tips in there

[@pescelino6627]

Good to see that van back in the videos!

[@karlscribner7436]

Nice video liked the soft subtle music track. I found in a short stint I did working in a body shop that many of the new high strength steel fenders are super flexible and almost scary so but when bolted up in place in the car structure are quite rigid and secure. Also often a great difference sometimes between a oem panel vs aftermarket in fit in place.

[@MakeItKustom]

Yeah there is a lot of difference depending on who made the panel and what steel they used. Varying thickness and strength make it challenging

[@jamiesawyer5102]

Wow, what an awesome informational video. I can't believe how light you are tapping and getting results. Thank you for sharing your knowledge.

[@fonhollohan2908]

Very good video Karl, I'm sure this can help a lot of folks develop the confidence to attempt to work on panels themselves, excellent video Karl.

[@Brian-uy2tj]

This was good video, full of practical instruction on how to work out a variety dents and creases. I enjoyed it very much, Thanks for posting it.

[@TheJosesantiago123]

Japhand is the man. Thank you Professor.

[@ПоследнийИван]

Hello✋. Thanks for the video. We have a night, and I'm watching instead of sleeping.🤦‍♂️😁 Sincerely from Russia🤝

[@noelmcgarry456]

Thanks for letting us in on the tricks of the trade were to start and patience is the a big part (something I lack) Noel

[@leslieedgardlindop7202]

Hi l done 65 years body paint and mechanical and l always use a guide coat on repairs and on primer filler .lf you want to do the job the right way .and l never did an apprenticeship but l learned 3 trades that way you don't have to rely on any body ..cheers les from Adelaide south Australia

[@daveeddy2402]

I'm trying to learn something new everyday.... That crease at 27:30... I would have looked at that and banged it in from the outside and you did exactly the opposite. I had no idea.

[@frankmamone1909]

Always a pleasure watching your work especially when you use hand tools

[@Jpcars636]

I done the same thing you did fair play for not leaving it out love your channel proper as it happens

[@romanzaretsky652]

Lateral tension may help a lot in this cases we pdr tech using lateral tansion a lot to realese tansion and push metal out Great job

[@wraith_imagined4904]

That's great work Karl! I'm so glad I found your channel. You've shown how much can be done to bring back old (and new, lol) sheet metal. You've inspired me and I can't wait to practice on my own projects.

[@Concise619]

Your great at this stuff dude! ive been working my 73 nova front passenger fender this and last weekend trying to remove rust and very similar dings that your doing here to this fender. Thank you for sharing your knowledge its really helpful

[@jawracing911]

Such a good video, in terms of technical repair, but also the footage, with an additional camera person 👍🏼👍🏼

[@dc85337]

Very clever of you! Create a KZbin Vid of a damaged fender showcasing your metal working skill! 😁 Very nicely done!

[@BillKristjanson]

I did notice the camera work, especially on the tight shots. I like it!

[@jacohauptfleisch935]

Great video - loved it! Thank you for a detailed video on not fast forwarding parts. back to basics. Something we all need

[@RGVJ21]

Another great lesson, thanx. And the music was very sooothing. Nice work.

[@kopkingjames]

Another great video, I have learnt so much from you from welding to panel beating. Thanks

[@jpvill4th]

The rolled edge that you are trying to get back to original can be done with a piece of aluminum more rounded than your hammer or a piece of hardwood that has been heated. Shape the wood and then heat the area of the wood with a propane torch. It may char a bit but it will get harder. I have used these shaped pieces of wood to .act as miniature dollys. They can be great for getting out very small low spots.

[@dirtyford633]

I have a cheap set of cold chisels that I like to keep around to grind into different shapes for inside corners like that. I love the format of this video. Keep up the amazing work.

[@MakeItKustom]

Yeah I love how you can make a tool from almost anything! Thank you very much man cheers!

[@landongodspeed8466]

Honestly it's refreshing to know you've done that too!

[@qivarebil2149]

Great work, Karl! You had to do some guess work on the way, but You guessed right! And that comes from the talent and experience You so clearly demonstrated in this video. Thanks for sharing! 👍

[@MakeItKustom]

Thanks so much man! It’s almost like a puzzle that you have to solve and I enjoy it

[@T0tenkampf]

great explanation of on and off dolly work, I have heard the terms but was never able to visualize the technique

[@throngcleaver]

Oh good! I'm glad it wasn't Kristina or Karl that decided to put music to your video. Whew! 😋 Great stuff, Karl! You do vantastic work.

[@TgWags69]

You should grab a masonry hammer to use for a dolly in that upper flange. The long curved end is perfect to reach up into that corner without impinging on the crown of the fender

[@koolkar55]

Made yourself a bit of work there Karl. Great repair by a master of metal (You). As always Mate love your work. Billy J.... Queensland, Australia.

[@MakeItKustom]

Ha ha thanks Billy ! I was pretty sad when it happened lol. Good thing it’s not made of wood

[@mattedwards4164]

Thank you so much for demystifying and sharing information related to metal fabrication. Really enjoying your channel.