No Gas MIG Welding Machine (Flux Core) - PARKSIDE PFDS 120 A2 | Unboxing and Test

[@genevajoseco6928]

I will rate that work of yours is 99.99$ an hour.you did a great job.

[@v8ryderzautoclub113]

Love this video no talking just showing every step my kind of videos

[@taters-no4gj]

Hi, just wanted to say thank you for a simple but informative video. I haven't welded before so I looked at 'welding for beginners' etc, but they were useless. You took it out the box, wired it up and and gave a simple demonstration. As you know, real men don't need instructions! 🤣🤣. Thanks 👍🏻

[@MakeAndTest]

I am glad you like it. I will make a more detailed video on how to weld very soon

[@shellamaemanuta985]

+magkano milling machine

[@armandssulmeisters9724]

111​@@MakeAndTest

[@lilladokka]

We have used the kzbin.infoUgkxOTeIs0vv4_9B5hsmnLsk9r930uDQLu_Y for probably 30 hours with our camper and it’s been great! The noise level is really only noticeable when running the AC and other appliances like the microwave, hair dryer, or coffee pot. It’s not huge like other ones and it has wheels so even at 90lbs, I can move it!

[@johnnorth9355]

Never use an A/C flux core machine as they are very difficult - always buy a D/C one. Never use the flluxcore wire that comes with the machine for anything but practice - buy some good stuff for real jobs. Practice plenty before trying to do real welds - particularly on thin material. Enjoy.

[@johannmeiring4208]

👍👍 thx

[@cestvraimenthorrible3465]

Can you pls elaborate on this suggestion you made? I'm looking to buy this machine when available again. Is it A/C or D/C and what's the difference between them? Thanks

[@johnnorth9355]

@@cestvraimenthorrible3465 My first flux core machine was an A/C one and it is very difficult to use - I no longer use it. You will find videos of people using the with some success but they are normally very experienced or well practiced on the machines. Because the polarity reverses with the mains frequency of 50/60 Hz they cause a lot of splatter as well and burn through thin material. DC is a lot more friendly for the novice (as long as you set the polarity correctly for flux core) and is much easier to become proficient with. If the Parkside is DC then it should be fine. I love my DC welder which like the Parkside was very affordable.

[@cestvraimenthorrible3465]

@@johnnorth9355 DC is the way to go then! I will that in mind. Thank you for the insightful tip.

[@martinhauk1852]

My Harbor Freight welder was 125 amp, AC output. It was slightly better than a hot glue gun. I converted it to DC electrode negative (DCEN). It made a whole new machine out of it. I took on a rather large project with it. I mounted a hydraulic cylinder on my HF motorcycle lift. I had to fabricate and weld the mount for the cylinder. The welds had to withstand 9,000# of force to lift a 1,000# motorcycle. I've been using it for about 3 months and the welds are holding well. Harbor Freight sells a 125 amp welder that is DCEN for a little more money. I bought mine not knowing anything about welding. The one advantage mine has over the one that's already DCEN is that it will accept a 10# spool of wire and the one that comes DCEN will only take a 2# spool. If that isn't an issue for you, I'd recommend buying the one that's already DCEN.

[@necurrence1776]

Thanks for testing and sharing. Seems convenient for home use

[@solkiyer]

can you write, for each thickness of metal, how you set the welding machine?

[@notwocdivad]

I was thinking maybe the feed rate could have been slowed a trifle and the amps also turned down. But that was just my opinion! TOOLIOM 200 looks as good a bet and cheaper??

[@sreenathnair6872]

Is this good for car body repairs

[@jhon7674]

the welder i had same as above ,was good for one year about 40 hours i used it for a year after some thing in side stopes the wire from running ,, the motor 12v stoped . it was good when it lasted on well will not bye again choose different maker ..same one i had as above

[@johannmeiring4208]

Perfect for me, whats your hands on verdict ?

[@stephensmith1089]

Does anyone know a cheap self feed no gas welder to buy as there's that many for beginning 🤔

[@Creations-hj2kq]

can you use wire feed (mild steel) that does not have flux?

[@MakeAndTest]

No, this is only flux core machine

[@zinomaloum6639]

Hello my friend, I have a Renault 4 car. I want to repair its body and floor with mig welding without gas 130a. Is this welding strong and good or not. I want an answer from you

[@ehsanmorav]

it can only weld steal, but no other sorts, not sure if suitable for a car body

[@estass2789]

Bende var bu makinadan arabalarda güzel sonuçlar alıyorum ancak yinede gazlı kaynak almanı önerebilirim en az 250 amper olmalıdır

[@gsn155]

which wire to use for s.steel

[@NoMoreFnGames]

How did you do them thick welds

[@peter-gn8ey]

what were your dials set to for the 1mm steel and the 3mm steel?

[@laszlovona]

3mm you would want to set wire speed to 4-5, and start with heat (voltage) from D+ till you find the sweet spot while lowering it.. (aka lowest spatter and smoothest sound of arc) btw this method is common for all MIg/fcaw welding.. you usually set the wire speed first and then find the proper heat for it...start with high heat and lower.. for 1mm?? ehh.. that would be a bit difficult...no continuous bead for sure.. try wire speed 1.with heat A-B and try tacking.. (all what I said goes to a 0.8-0.9 wire)

[@ehsanmorav]

@@laszlovona There is only a single dial on the machine for specifying the metal thickness (0.8 to 3 mm). The feeding speed and amperage is automatically set by the machine.

[@laszlovona]

@@ehsanmorav you are talking about the new type. The OP asked about the old version seen in he video.

[@jamesward5721]

I can tell you first hand that this is a dreadful machine - I have one - however I also have the more expensive Parkside multi-process welder, which I use to run flux core & it is a little belter of a welder. Excellent machine, can't say enough good things about it. This ^^ however is absolute pish.

[@mikeches7992]

You should've show the settings for every thickness!!

[@jorge6491]

Cuánto vale

[@Coolmaaaaaan]

At what amps did you weld the first sheet metal?

[@newry123]

What 3 thickness of wire did you use, thanks

[@amitpunjani1426]

Isn't it good that it is not synergic? As we can reduce or increase wire feed and volts as required to get the desired results....

[@МагомедАбдулгапуров-т5г]

вы добрие люди ващего товара цена и адрес укажите

[@mustafagorgulu7455]

Hocam.bu.aleti.nasil.ala.bilrim.bana.bilgi.yazsan.tesekkur.ederim.

[@JoaoPaulo-bn8ti]

O q eu faço para compra uma máquina de solda dessa

[@antonisantonis655]

you can find this welding machine at a LIDL supermarket.

[@virgil5361]

That was one of the best review videos I have seen out here. Too bad Amazon does not sell that welder here in America.

[@J.Santos81]

The wire its the regular MIG (with gas) or its a special wire to do it without gas?

[@MakeAndTest]

Special (Flux core wire)

[@reycardenas6508]

En Perú donde lo consigo y cuál es su precio

[@sarkismahserejyan1309]

Hello how i can buy this machine do you have presantor in lebanon and whate is the price ?thenk you

[@mullakaman9893]

I am interested buying this machine Avutralia Melbourne thanks

[@AsadKhan-yz9be]

Move to europe mulla

[@mazambeliqbal3487]

Hi am new to this , what to ask can i use this on car bodywork??

[@MakeAndTest]

I wouldnt recommend. Metter to have a proper MIG welder

[@kgcem]

Make & Test... Qual é o site que você comprou está máquina?

[@victormiramontes6662]

LIDL

[@kgcem]

@@victormiramontes6662 olaaa 🤔🤔 Não entendi....

[@christiandesse5643]

Bonjour moi j ai un souci avec mon poste le moteur qui entraîne le Fil ne fonctionne plus naturellement plus garanti

[@MultiScience2]

how many watts does it consume?

[@НетБогаКромеАллаа-я8у]

Не знаю

[@f.a3202]

is this A/C or D/C welder

[@boakyeJohn-bu7ln]

Pls where can I get some

[@meeekstubbular]

Interesting ...I would have love words with it ...But seeing all these question in many languages, no words must be ok! I wonder If this one is close to the Mig 100 a friend bought at aldi

[@DanSmokie]

Great job and fantastic result there. Can i please kindly ask your voltage and speed knob settings from the first thinnest sheet to thickest metal sheet? I've got the same one and im really struggling with given instruction outside the box. Much appreciated!

[@MakeAndTest]

I cant remember for two years back sorry

[@jaquesNewimp]

Géniale félicitation grandiose pour les commentaires m’intentant on connais tout sur ce poste à souder 😂😂😂

[@francescocolussi6845]

Fornitore in zona dove?

[@waliwali7337]

How to get in KP swabi and what is the price

[@visibleman4604]

What is the price for this machine

[@OErämies]

100 e 😊

[@OErämies]

Joo 100e lidl 🇫🇮

[@acostin4004]

Are you in uk

[@Îltej]

How much the moprize i want to buy

[@MakeAndTest]

Google ot

[@johnrutherford8246]

The Parkside wire makes a lot of fumes you need to wear a respirator or use outside on a windy day

[@necurrence1776]

Yes the fumes are terrible I agree

[@kamruldhaka88]

I need mig welding machine 350 amp. How much price?

[@stotheh]

....so is that good or bad?

[@How_is_this_taken]

Its alright. The dude welding is trash tho

[@OmoitJames-rx6qn]

Please brother I would love to have this machine but how to reach me

[@Fre_fire_Qr]

Сколко этит сварка

[@RK-nl1hn]

Hi can it weld alimkmium and or stainlesssteel?

[@ehsanmorav]

I have searched plenty, and this machine cannot do that! Pity!

[@prashanthgowda2673]

Yes. It can weld SS

[@chaturbhaigothi3379]

मैआ ईसका रेट कीया हे कीतने घटे चला सकते कोमेट मे बताना ओर कहासे मसीन आऐगा

[@benedictlucas4530]

How can I buy this gas less machine please

[@jayoredein6511]

Lidls in England this week

[@TheUltimate65]

Litle more volt ,and less of spatters , and rhe finish been more glaze too, replement the gas cap fore selfsheld welding ,you see more better of welding

[@dporto2241]

Olá como vai .tudo bem .Sou Dorival . Por gentileza alguém pode me passar o preço .desta máquina .. Aguardo . Resposta Dorival

[@jose.rodriguesmaciel4378]

md7mjdjpGpM8

[@juliusdagcutan2000]

How to order?

[@henrycollins5097]

Where can I get to buy

[@jayoredein6511]

It’s in Lidls this week. Saw it this morning

[@stanislavzumarevic4422]

Kojea cena ovoga aparata Bez gasa

[@stanislavzumarevic4422]

Kojea cena aparata bez gasa

[@rachidmohamed1151]

Hello I am interested in buying this machine

[@zubairahmed9923]

What price?

[@jayanunnithan7395]

How much this machine Indian price..

[@albertopintorchapa]

Pintor bueno herramienta para lo chapista gracias por mostrar 😉

[@GAMERKK2765]

price

[@metalmek70]

La torcia non va usata come un elettrodo che si tira ,il filo continuo si spinge.

[@kurtknapp4864]

If it does not use gas, the process becomes FCAW not MIG.

[@newshreeparmanandandsons9338]

यह मशीन कहा उपलब्ध है

[@stanislavzumarevic4422]

Koliko kosta i kako mogu naruciti

[@miodragrandelovic5799]

imas u LIDL. takodje sam ih video polovne na sajtu KupujemProdajem

[@kessydieselengineers3205]

How much USD brother

[@lucianocorimayhua7512]

Done se encuentra la tiendas para poder adquirir esta maquina

[@meeekstubbular]

Amazing replies from all over the world! No se donde las tiendas son pero tengas que buscar con google. Me gusta practicar mi espanol - buena suerte con eso:)

[@michaelcastro2077]

Sound great machine strong

[@shaineriches4369]

Its proper spattery. Turn the wire speed down abit

[@IvanaSipovac]

Koliko kosta ovaj co2 aparat pozdrav

[@jdpaktaba1456]

Welding machine price

[@cenhickey981]

If you want to learn more about welding machine, please contact me. Dear

[@saddamdake9660]

Welding machine price..

[@AsadKhan-yz9be]

150pounds

[@ivan-lf5ut]

Para que sirve el gas en la Mig ?

[@b.p.rwebber8098]

Carbon or mixed carbon and argon known as argoshield. Also argon gas normally for duelshield welding thats fuwcore wire with gas.

[@hoangphuongmai2115]

May nay mua o dau z bn

[@hermesleonaguilar1683]

En colombia donde la puedo conseguir , y cuanto vale

[@lucasoliveiracoutinho917]

Como faço pra comprar

[@JohnSmith-ho8up]

Only get a Fronius 2200

[@MigilimoKakumye]

How much price

[@MakeAndTest]

Lidl

[@bricovideo.ovh_tiktok-v4s]

PARKSIDE PFDS 120 A2 👍🏻

[@metalman4141]

Thanks for that I’m just off to hospital with arc eye 😵‍💫

[@tafadzwakasere402]

😂😂 What happened brother

[@Frifeank]

Tienes q echarle el aerosol para CO2 para evitar tanta salpicadura.

[@francisciscoazocarmedina7782]

Precio donde la venden

[@satriawiawi9508]

Harganya brapa klaw yg 45o wat

[@AaftaabAnsari-yi4ic]

Kitne ka padhega

[@krishnadussa6520]

How much

[@RakeshKumar-zy5vr]

Price

[@rajunandhi8353]

How mach

[@jaysonbullecer8683]

how much sir

[@Psyrax64]

Push the weld man dont drag it if you don’t have to

[@joecrancher2008]

I believe you do have to drag with flux core, hence the saying if it has slag, drag

[@Then.72]

Doesn’t matter with flux core because that’s how the pipe work is done with the mig

[@ВадимКузнецов-з2й]

... где можно приобрести такой же сварочник и по какой цене 👍👏🥽?!!

[@ИлюшаИванов-ч1н]

лучше сварог купи Сварочный аппарат инверторного типа Сварог REAL SMART MIG 200 BLACK рукав должен быть сьёмным

[@Kwago1]

You know when you bought everything eles, then you come upon a very nice video like this. Ain't that a B***h!

[@hanif20231]

Great thank you

[@канал-с7е6и]

Свака сколка стоет

[@nrayanerhg53h]

Should I be wearing a welding mask when watching this?

[@billytopa]

No, just look closer!

[@Literature-ft8ru]

If you look at a white screen its not the same as looking into an arc flash. Your phone does not recreate the same level of light as a high amperage industrial welder

[@ams.jafarsathik9704]

Pries

[@omarceilima2260]

Queria saber do valor da máquina e como é o procedimento de pagamento

[@sebastiaomartins9785]

Quanto custa a máquina de solda

[@sebastiaomartins9785]

Quero saber o preço

[@sebastiaomartins9785]

Quanto custa

[@myakalalimbadri8407]

Sir i want how much price in Saudi Arabia

[@naturemedia6208]

Do you have electricity in saudi arabia?

[@reynaldoparena6823]

San b makakabili nyan at magkano

[@reviyanti4576]

Yg ini brapa harga nya bos

[@FishingwithRomanas]

This is LIDL brand Parkside welding apparatus

[@WilardoObnimaga]

Magkano po ang price?

[@rprao8609]

What is price

[@DavinderSingh-fm7zw]

What is the price in india

[@AsadKhan-yz9be]

150pounds uk