STAINED GLASS RING SAW! Finally exploring the Taurus Ring Saw 3! (Making maple leaves!)

  Рет қаралды 36,048

Makenzie Hallie

Makenzie Hallie

Күн бұрын

Пікірлер: 258
@lucymoore3104
@lucymoore3104 4 жыл бұрын
Hi - none of the new models have the water mark - bit frustrating but two fingers deep seemed to work for me x (loving your video by the way )
@MakenzieHallie
@MakenzieHallie 4 жыл бұрын
oh jeez!! How come?! and the manufacturer said its roughly one gallon or half way up the blue pulley, so at least it's easy enough to still identify!
@lucymoore3104
@lucymoore3104 4 жыл бұрын
@@MakenzieHallie no idea but defo read it somewhere - seems a bit nuts to take away such a simple thing from the design but my god they are fun toys to play with aren't they!!
@MakenzieHallie
@MakenzieHallie 4 жыл бұрын
honestly!! That makes no sense, seems so backwards and not helpful lol!! Maybe machines werent burning out quick enough for them to make $ 😂😂
@paulstacey7814
@paulstacey7814 4 жыл бұрын
They saw to fill it to the middle of the lowest blue wheel (just got mine)
@robertmcgivern565
@robertmcgivern565 3 жыл бұрын
I'm guessing if the band is fully underwater at the bottom of the cycle, then it's good ? Dunno, but it looks already like, I Want One !
@ellagregory818
@ellagregory818 2 ай бұрын
I need to try one on my ringsaw
@SuperBrowndog1
@SuperBrowndog1 4 жыл бұрын
I love, love, love your videos. You are a great teacher. The maple leaves 🍁 came out beautifully. Thanks.
@MakenzieHallie
@MakenzieHallie 4 жыл бұрын
Thank you!!
@karendixon4266
@karendixon4266 2 жыл бұрын
Just gorgeous maple leaves, I love them. You can also use thin cooper wire for veins and then wrap around stem,
@sylviaprudhomme5417
@sylviaprudhomme5417 2 жыл бұрын
Enjoyed every minute. Great job
@torirane2075
@torirane2075 2 жыл бұрын
You are GREAT at explaining all kinds of things!
@MakenzieHallie
@MakenzieHallie 2 жыл бұрын
Thank you Tori!
@emachine310
@emachine310 3 жыл бұрын
Very nice work. Each and everyday im more happy that i found your channel.
@MakenzieHallie
@MakenzieHallie 3 жыл бұрын
I appreciate you!
@lisamiller6794
@lisamiller6794 3 жыл бұрын
It’s all in the instructions and dvd about the water line level . Easy peasy 😀
@kathydesjourdy4607
@kathydesjourdy4607 4 жыл бұрын
Good morning Makenzie, I have been using the ring saw for 20 years. Great help when cutting small intricate spaces. Great job explaining
@MakenzieHallie
@MakenzieHallie 4 жыл бұрын
Good morning Kathy!!! I wish I could have had your help and knowledge to even better explain!! It was so much fun, I cant wait to start really using it now!!
@sakthiveldot9109
@sakthiveldot9109 3 жыл бұрын
Great video.
@sherrillherrington3617
@sherrillherrington3617 3 жыл бұрын
Mackenzie -by far have learned the most useful tips from your videos as well as overall enjoyed your down to earth and honest explanations. Thanks SO much for sharing your knowledge and experience. 🙌🏼
@MakenzieHallie
@MakenzieHallie 3 жыл бұрын
I'm so glad my channel has been helpful! Thank you for watching!!
@joevangorder6050
@joevangorder6050 3 жыл бұрын
Love that store! Your videos are great learning so much from you! Keep it up!
@kaylahelgeson8897
@kaylahelgeson8897 4 жыл бұрын
I've never even heard of this ring saw before your video. EYE OPENING - Thank You!!! Can't wait to pick one up.
@MakenzieHallie
@MakenzieHallie 4 жыл бұрын
So glad you learned about something new! Thank you for watching!
@deannaleyva5110
@deannaleyva5110 4 жыл бұрын
I just want to express my appreciation for you! You’re simply the best to watch to spark every ounce of inspiration! Adore you and your work!!
@MakenzieHallie
@MakenzieHallie 4 жыл бұрын
Thank you so much!!! I appreciate your support and for watching!!! So glad you feel inspired!
@Rottingboards
@Rottingboards Жыл бұрын
Thanks so much. This is just what I was looking for to cut out leaves for a big window project.
@MakenzieHallie
@MakenzieHallie Жыл бұрын
Happy to help!
@dryerlint17
@dryerlint17 4 жыл бұрын
That saw opens up a lot of possibilities.
@MakenzieHallie
@MakenzieHallie 4 жыл бұрын
It absolutely does!!
@-ray-h
@-ray-h 3 жыл бұрын
That Taurus Ring Saw is wicked crazy... That saw will make cutting those tight curves & angles a piece of cake... I definitely have to get me one of them...! I too could feel your excitement watching that blade go through that glass... Just an amazing invention...! Amazon has them for $394.00 and the blades for $26.00 bucks... Thanks for the awesome demo...!!!
@williamtrice1492
@williamtrice1492 Жыл бұрын
Can this machine cut plates and cups? Love your videos!
@MakenzieHallie
@MakenzieHallie Жыл бұрын
Glass, porcelain or what? & thank you!
@toroidwinder2089
@toroidwinder2089 3 жыл бұрын
.Have the taurus 3 setup in my work area. Really great unit. It just consumes glass. when working a design, it's great to just be able to step over to the ring saw to cut glass. The blade it comes with really cuts glass fast....Although it produces rough edges. I end up cleaning the edges with the 1/4 diamond cutter.
@MakenzieHallie
@MakenzieHallie 3 жыл бұрын
Definitely! I love the ring saw so much!
@anniedugan9397
@anniedugan9397 3 жыл бұрын
You are so gifted. Beautiful crystal balls and very helpful stencil tutorial. I live on the Cape and aside from Hobby Lobby (UGH), there is no place closed for supplies. I like your mixed media demos. TY
@MakenzieHallie
@MakenzieHallie 3 жыл бұрын
Thank you so much Annie! Definitely sounds like you'll have to make a trip closer out my way to get a good glass shop. Even though my fav is an hour away, I would drive 5 hours to get to her if I had to!! Its worth the trip if you can make a little vaca of it!
@saramarie3185
@saramarie3185 3 жыл бұрын
You're SO talented!!!!
@MakenzieHallie
@MakenzieHallie 3 жыл бұрын
🥺🥺 thank you!!!
@XxkittystarrXx
@XxkittystarrXx 4 жыл бұрын
Well I know what I’m asking Santa for this year! I’m a newbie but I’ve been hearing about this ring saw and now to see it in action, holy cow I need it! Absolutely satisfying! Great work!
@MakenzieHallie
@MakenzieHallie 4 жыл бұрын
😂 absolutely! It's a game changer!! So fun!! Thank you for watching!!!
@jennyhoman195
@jennyhoman195 4 жыл бұрын
Santa needs to make 2!!
@marthapotter8283
@marthapotter8283 3 жыл бұрын
Found you by chance but have now subscribed. I love my Taurus ring saw too! Greetings from Canada 🇨🇦
@MakenzieHallie
@MakenzieHallie 3 жыл бұрын
Awesome!! Thank you for watching!
@waynemcphail7825
@waynemcphail7825 3 жыл бұрын
Great video!
@jokappel2430
@jokappel2430 2 жыл бұрын
I bought my T3 about 14 year’s ago and I still love it, the first thing I did was cut maple leaves that I sold on the bay. Mine just had a mark on the inside for the water mark so I used a sharpie and just drew a line.
@KatharineMiele
@KatharineMiele 4 жыл бұрын
Ughhh. That is such dream saw!
@MakenzieHallie
@MakenzieHallie 4 жыл бұрын
Right!!!!?? I was so excited to have it, its fantastic!!! Thank you for watching!!!
@annaivanov6137
@annaivanov6137 4 жыл бұрын
Amazing!!! The way it glides through the glass - it reminds me of a sawing machine - the ease of it! Wow!
@MakenzieHallie
@MakenzieHallie 4 жыл бұрын
It is absolutely magical! So fun!
@anneellicestrong2107
@anneellicestrong2107 3 жыл бұрын
Thank you! Going to try my friends saw to cut my 5 pointed star. Wish me luck
@MakenzieHallie
@MakenzieHallie 3 жыл бұрын
Good luck Annelice!!! You can do itttt!!!!
@anniedugan9397
@anniedugan9397 3 жыл бұрын
I may have to take you up on the referral to the place where you buy your glass. After all, for me, choosing the glass is what motivates me to create. I like to pick the glass first and then decide how to use it.
@MakenzieHallie
@MakenzieHallie 3 жыл бұрын
Exactly. Being able to physically see the exact sheet I'm purchasing is a must.
@oulewappeur76
@oulewappeur76 3 жыл бұрын
Wow. Epic machine!! I love how much I learn from you. Love yr channel. Thanks so much . 🌙🖤
@MakenzieHallie
@MakenzieHallie 3 жыл бұрын
So glad your enjoying it!! Thank you for watching!!!
@tamcarrara6388
@tamcarrara6388 3 жыл бұрын
Makenzie your videos are awesome! Thank you so much for doing this!
@MakenzieHallie
@MakenzieHallie 3 жыл бұрын
Thank you for watching!
@scottish-tom
@scottish-tom 4 жыл бұрын
Ah that machine is awesome, can't wait to see what you manage to create with its help :) the maple leaves are great!
@MakenzieHallie
@MakenzieHallie 4 жыл бұрын
Hell yea dude its awesome!!!
@roxannebertolino1362
@roxannebertolino1362 4 жыл бұрын
Look inside mine is inside for water line
@MakenzieHallie
@MakenzieHallie 4 жыл бұрын
I wish! They actually stopped marking all new models completely! 🖤
@roxannebertolino1362
@roxannebertolino1362 4 жыл бұрын
Ring saw
@MakenzieHallie
@MakenzieHallie 4 жыл бұрын
yes, the ring saw.
@accordingtobush4250
@accordingtobush4250 4 жыл бұрын
HOLY COW! What a machine! So I just had to go back to my glass shop today and grab some orange for a project of mine and I just saw this same doohickey! Wowzers, guess I know what to save up for! I'm so lucky to live literally 10 minutes down on the same street from the glass shop(not to brag 😉)! I even drew out my own stencil design, without a reference💪, for this project. I'll be making some items to help raise funds for some glass artists on the west coast that lost their shops and homes. 🙏
@MakenzieHallie
@MakenzieHallie 4 жыл бұрын
Isnt it insane!!! so fun, you'll love it! & That's awesome!!! That's the best way to do it in my opinion! keeps us all unique! Thank you for watching!!
@sarahhall5920
@sarahhall5920 3 жыл бұрын
Beautiful!!
@MakenzieHallie
@MakenzieHallie 3 жыл бұрын
Thank you Sarah!
@brettjackson5527
@brettjackson5527 4 жыл бұрын
Just found your channel, great video. I have been doing stained glass for 3 years now and have seen this saw but never in action. This is such a cool tool and really opens up endless design possibilities.
@MakenzieHallie
@MakenzieHallie 4 жыл бұрын
Indeed it does!!! Its so much fun!!! Thank you for watching!!
@ronanthem
@ronanthem 4 жыл бұрын
Your enthusiasm is infectious! I get excited for you, while watching you. It's easy to see that love what you do. BTW (if you care about terminology) the thickness of the blade + material removed is called the "kerf" of the blade. I love your videos!
@MakenzieHallie
@MakenzieHallie 4 жыл бұрын
I absolutely do love my job! And I had no idea it was called that! Cool!!! Noted! Thank you for watching!!
@mandyunger3878
@mandyunger3878 4 жыл бұрын
This looks better then the stain grain grinder .
@MakenzieHallie
@MakenzieHallie 4 жыл бұрын
Unfortunately it's not a grinder replacement. It's a machine to cut out those rare very difficult angles and shapes. Not for everyday, everyday glass piece grinding! But it is amazing for its purpose!
@charleyf.3758
@charleyf.3758 Жыл бұрын
Yes no more with the water line but the instruction book mentioned to fill the pan to halfway of the lowest bearing. As soon as I've done this I put a line on my pan.
@rachaelnikkola8257
@rachaelnikkola8257 4 жыл бұрын
This video makes me so excited to think about ordering this! Love your tutorial! Super happy!
@heartfuldesigns4you
@heartfuldesigns4you 4 жыл бұрын
So good! 🍁❤🧡💛
@MakenzieHallie
@MakenzieHallie 4 жыл бұрын
Thank you so much!!
@queenazeena
@queenazeena 4 жыл бұрын
That's freaking awesome girl
@MakenzieHallie
@MakenzieHallie 4 жыл бұрын
Thank you! & thanks for watching!
@michelleford9951
@michelleford9951 3 жыл бұрын
So pretty
@MakenzieHallie
@MakenzieHallie 3 жыл бұрын
Thank you!!
@maryisdahl6031
@maryisdahl6031 4 жыл бұрын
That was so fun watching you cut that out, I could have really used this on my last project!
@MakenzieHallie
@MakenzieHallie 4 жыл бұрын
It is so satisfying!! Definitely great to have for those random insane cuts! Thank you so much for watching!
@lahy7346
@lahy7346 4 жыл бұрын
This is a great video. I'm not familiar with the ring saw at all and have been making stained glass for a very long time. You explain everything so well. Very informative. Again, great video!
@MakenzieHallie
@MakenzieHallie 4 жыл бұрын
Oh that's awesome! I'm so glad you found something new then!! Thank you for watching!!
@unapologeticallyme8513
@unapologeticallyme8513 3 жыл бұрын
I love using our band saw for glass we did fairy wings and dragon wings with it you could make the wings so much more frilly and dainty!
@madambutterfly5343
@madambutterfly5343 2 жыл бұрын
Wow!
@buffalogal496
@buffalogal496 4 жыл бұрын
Been waiting for this video! I bought the same saw and was super intimidated and haven't opened it yet either. You've got me excited!! Thanks for sharing your experience 🍁
@MakenzieHallie
@MakenzieHallie 4 жыл бұрын
aw yay! I'm sorry it took me so long to get up, just so much I want to film! As soon as you push the glass up against it, your gunna be like "oh, I'm totally fine. I got this." Its so easy and fun!!!
@hollytibbetts2003
@hollytibbetts2003 4 жыл бұрын
No kidding! I watched the video of you purchasing the ring saw, however long ago and I was just as excited as you were for this video! Love your passion and way of teaching- plz never stop inspiring us🤗
@MakenzieHallie
@MakenzieHallie 4 жыл бұрын
Aw thank you so much, I appreciate your support!!! Thank you for continuing to watch and comment!!!!
@arseneouellet9038
@arseneouellet9038 Ай бұрын
Thanks for the, video. What kind of marker should we use , that would sustain the water splash but could also be washed away easily once the glass has been cut?
@MakenzieHallie
@MakenzieHallie Ай бұрын
Thank you for watching! I just useSharpiee! If any is left by the time it's completely done, the rest usually comes off in that final piece scrubby wash or ill use acetone/ rubbing alcohol. 🖤
@akinequeen6569
@akinequeen6569 3 жыл бұрын
Hermosoooooooo!!!
@MakenzieHallie
@MakenzieHallie 3 жыл бұрын
🖤🖤
@toroidwinder2089
@toroidwinder2089 3 жыл бұрын
My current project has many cuts that are inner small radius. I've been using the 1/4 inch grinder bit, but that is a PITA. After watching this, I just ordered one of these puppies.
@viproo6302
@viproo6302 4 жыл бұрын
BraVo Makenzie, nice maple leaf pieces, good cutting video. I've looked at this model and several others. I like the ability to cut in any direction because the saw blade is diamond coated all around the blade. Like you say, "Push, Pull, Sideways... pretty cool machine. Def a critical glass tool. Thanks again for the time you take to make nice vids and very creative glass pieces.
@MakenzieHallie
@MakenzieHallie 4 жыл бұрын
It is! Its absolutely a game changer!!! Thank you for watching!!!!
@dawnchesbro4189
@dawnchesbro4189 4 жыл бұрын
New subscriber here! I am just starting to dip my toe into stained glass and I wanted to let you know how helpful and informative your videos have been. Your bringing up techniques I haven’t heard of and laying it out clearly so even a noob like me can follow what you’re doing. I do enjoy the glass haul videos since it gives me great inspiration! And I like seeing another artist’s design, compared to my instructor’s personal design as well as my own design! Thank you!
@MakenzieHallie
@MakenzieHallie 4 жыл бұрын
Awesome!!!! Welcome & welcome to the stained glass community!! I'm so glad your finding them helpful and easy to follow!!! Its always nice to get many perspectives, I'm glad your here! Thank you so much for watching!!
@jaredlargen5273
@jaredlargen5273 4 жыл бұрын
Thanks about the breakdown of this product. I have curious about this and thinking about getting it.
@MakenzieHallie
@MakenzieHallie 4 жыл бұрын
Absolutely! I was so curious too! Thank you for watching!!!
@jaredlargen5273
@jaredlargen5273 4 жыл бұрын
Also, I guess if you wanted pieces to fit together all you would need to do is add on the bit width to the perimeter of your template.
@MakenzieHallie
@MakenzieHallie 4 жыл бұрын
yes you absolutely could!! However that would that would be an absolute nightmare & it's not meant for cutting all your glass! It would put alot of strain on the grinder/blade, very quickly! And for 500 bucks, I'm gunna use this thing like my life relies on never buying another 😂
@jaredlargen5273
@jaredlargen5273 4 жыл бұрын
@@MakenzieHallie Ah! thanks for the extra insight.
@MakenzieHallie
@MakenzieHallie 4 жыл бұрын
Absolutely! I think I should have put more emphasis on this machine being the rare occasion thing!
@joshlyngreever1352
@joshlyngreever1352 3 жыл бұрын
Can you tell us about the Matt you are working on and what flux you use?
@seanlee74
@seanlee74 4 жыл бұрын
New sub, they look awesome. Very autumnal. Great work.
@MakenzieHallie
@MakenzieHallie 4 жыл бұрын
So glad to have you! Thank you so much and thank you for watching!!!
@Artsrock36
@Artsrock36 4 жыл бұрын
Oh my gosh! You just answered my question. Which was can I put tape on tape. AWESOME! Thanks.
@deannak1841
@deannak1841 2 жыл бұрын
I'd call that a blade not a bit... It's basically a mini band saw with a water table, but yes it's AWESOME!!! I'm happy for you
@californiagumbo8702
@californiagumbo8702 4 жыл бұрын
Cool!
@emilym.miller5472
@emilym.miller5472 2 жыл бұрын
How do you dispose the water in your rinse bucket safely? TY, LOVE your channel.
@jacobdavid498
@jacobdavid498 4 жыл бұрын
Nice one
@MakenzieHallie
@MakenzieHallie 4 жыл бұрын
Thanks for watching!
@kellyrancourt
@kellyrancourt 11 ай бұрын
I must ask how did you manage to foil the maple leaf. I got a Taurus ring saw and I just cut some shapes with zigzags similar to your maple leaf, and I am wondering how I’m going to foil this. 😫
@garypugh5008
@garypugh5008 3 жыл бұрын
What kind of markers are you using to draw you pattern onto the glass. When I am using mine, there is so much water that the marker lines wash off with the water.
@MakenzieHallie
@MakenzieHallie 3 жыл бұрын
I use a sharpie! But I do get this question alot, so I looked into it. Anything oil based will help keep the lines on longer. So a chapstick, Vaseline, etc. I will say it does make for a messy experience, and difficult cleaning. If your ok really going in on cleaning the grease away after, I would say it is worth it if the lines just aren't staying long enough.
@Artsrock36
@Artsrock36 4 жыл бұрын
Hey girl thank you so much for saw part info👏🏻👏🏻 your the best! I tried searching on Amazon an found nothing. This must be an issue for others as well because it's currently unavailable. Thanks for your kindness.
@MakenzieHallie
@MakenzieHallie 4 жыл бұрын
Unfortunately it is, Corona has affected many things when it comes to shopping, supplies being a big portion of it!
@tturtle21
@tturtle21 Жыл бұрын
What do you use to draw on your pattern? I use sharpie when using my regular grinder but the amount of water is washing off my pattern before I can get it cut. 😢
@MakenzieHallie
@MakenzieHallie Жыл бұрын
I use Sharpie! If you're having issues with the washing away, you can use anything oil based. Even go right over your lines with a spare chapstick you have or Vaseline. But BEWARE, you will absolutely be doing a much more thorough clean getting all those oils completely cleaned off your glass before you foil. But it will absolutely keep your lines put. They also make special products for it, which i will be showing on my channel soon! (All right on amazon. 😉🖤)
@dianehutchins9206
@dianehutchins9206 3 жыл бұрын
Hi McKenzie! I watch your videos all the time. Very informative! Can you tell me where you get your glass? I live in Wisconsin and I can’t find any places around here that sell nice sheets of glass like yours.
@MakenzieHallie
@MakenzieHallie 3 жыл бұрын
I have videos that show where I would look, IF I did shop online. Which I don't unfortunately, all my shopping for glass vids feature my fav shops near me! 🖤
@ellagregory818
@ellagregory818 Жыл бұрын
If you have a ring saw , do you think there is still a need for a regular grinder also ?
@MakenzieHallie
@MakenzieHallie Жыл бұрын
Oh absolutely. You need a grinder before a ring saw. A ring saw is strictly for the cuts you cannot physically make otherwise. Its not meant for everyday, long term running for grinding edges of glass. It takes a chunk with it. It just also clearly happens to grind the edges at the same time. Two totally different machines for two totally different purposes. ♡
@tonyamoreton522
@tonyamoreton522 2 жыл бұрын
Is there not a water mark line - usually a long thin bump - that shows water depth? Or does it say in the manual exactly how much water to put in? 4 cups, 8 cups?
@EllisRanchWeddingPar
@EllisRanchWeddingPar 3 жыл бұрын
What do you use to draw your pattern on the glass. I used permanent magic maker and when the water hit it, the maker came off.
@rachaelnikkola8257
@rachaelnikkola8257 4 жыл бұрын
Regarding rinsing grinded pieces, I rinse in a bucket with warm water. Should I be dumping the bucket water outside, versus into the household sink?
@MakenzieHallie
@MakenzieHallie 4 жыл бұрын
Absolutely, don't want to dump glass shards down the sink!
@shermancraig9136
@shermancraig9136 3 жыл бұрын
What pen did you you to mark the maple leaf?? The ring saw with water washed away the marks. Thanks
@MakenzieHallie
@MakenzieHallie 3 жыл бұрын
I use a sharpie, and it's always worked, no issues for me! If your having trouble keeping the ink on, i tried chapstick and it absolutely helps but is messy to clean off. Many people have asked what I use, idk if my sharpies are just bullet proof or what lol, but If you want to see me testing it out, I did it in my coffin sign video. I have also heard anything oil based will work like Vaseline, etc. But I haven't tested them out so can't say for sure. Again the chapstick worked, but isn't worth the hassle of cleaning it off good enough to have a safe and strong foil application. I'd say a clean surface with a good sharpie should work just fine!
@shermancraig9136
@shermancraig9136 3 жыл бұрын
@@MakenzieHallie I realize that I did not add the little red stickers to the saw. Maybe they will cut the water from the work piece. Thanks again, Sherm
@MakenzieHallie
@MakenzieHallie 3 жыл бұрын
🤞🤞 no matter what some of the stencil will wash away. Just try and work quick, and use chapstick for the more intricate cut. I hope those stickers help!!!
@deborahstevenson9447
@deborahstevenson9447 2 жыл бұрын
Is it better to do your vein overlay before doing the edges in foil?
@toroidwinder2089
@toroidwinder2089 3 жыл бұрын
Just got my taurus 3 in. I have to say, you were correct on the CD. While tongue in cheek, the guy with the bow tie is creepy in a weird peewee herman kind of way.. I look forward to taking this thing for a spin. OH, just found a supplier 15 minutes from work....there will be many a lunch spent going there. John
@MakenzieHallie
@MakenzieHallie 3 жыл бұрын
No way!!! I would be there all the time, luckyyyy!!!! And right? LOL, the DVD is.....charming yet creepy. Love it. Lol!!
@toroidwinder2089
@toroidwinder2089 3 жыл бұрын
@@MakenzieHallie Having a glass of wine (well, two) to toast my successful glass source find, I will not run the taurus tonight..I do enjoy counting to five and having two eyes to see. However, tomorrow morning is a different story. He also had 6 foot long zinc came pieces, another find. I am putting a 29 inch diameter window piece together, so longer came is better as I hate seams.. Tomorrow I start making a custom jig for bending the came to that diameter. Milling and the lathe will be involved. Sometimes I feel like Tim Taylor. The funny thing is, the store owner told me about another store run by one of his former students, it is 1/4 mile from my house....my fear is I will be signing over my paychecks to her. Gonna play with the foiler I received today as well. While I do very much enjoy and learn from your videos, they do tend to cost me a lot of money.. Oh, just saw your part 4 office setup.. I cringed seeing you stand on that stool..the safety people at work would have had you flogged, tarred, and feathered for that...be safe... Cheers, John
@tonyamoreton522
@tonyamoreton522 2 жыл бұрын
Blade is the correct term. Bits are things that have a chunk that fits into a holder and you use the end for things like drilling holes. Saws that use round or loops to cut use blades. In order to fit pieces back together perfectly, just like woodworking with a bandsaw (or quilting for that matter), you simply add the width of the blade to the outside of your template and cut that. Hope that helps.
@MsAvatarCat
@MsAvatarCat 5 ай бұрын
Just add water until you see water is coming out at the top of the ring, right above where you’re cutting. Works for me. I’ve had my Torus ring saw for about 15 years.
@MsAvatarCat
@MsAvatarCat 5 ай бұрын
Also don’t force the glass into the ring. That wears the diamonds out faster. Gently guide the glass and allow it to grind it. It’s a slow process.
@jmikronis7376
@jmikronis7376 4 жыл бұрын
@Makenzie Hallie, it’s called a band saw because the cutting tool is made in the form of a band (circle) of steel. I figured I would answer your question, I’m not trying to be a smarty pants. Coming from the Electronics Repair Industry, I see the totally enclosed motor as a weakness in this system, which I would have to investigate if there were any option of installing anything to help cool it. Maybe there are other models which offer venting for it. Now, as a total newbie in the stained glass cutting craft, I “just learned” of this method of cutting it. I’ve got a flex shaft motor and Diamond (powder) grinding bit. It’s the addition of a distilled water supply that’s important due to the cloud of silica dust arising from cutting action, to make.
@MakenzieHallie
@MakenzieHallie 4 жыл бұрын
The big water basin that it sits in, is what cools it! Thank you for watching!
@URBANFARMBOYS
@URBANFARMBOYS 4 жыл бұрын
Amazing video! A question about your glass “mud”. You say not to send it down the regular drain. Where DO you dispose of it? I’m imagining between buckets and grinders etc you’d have a large volume of water with a much smaller amount of the glass mud in it. So I can’t see pouring all that into the garbage. I’m in an apartment now but moving into my new house soon. I could definitely designate a spot in the yard for that as the house is on a lot of land, but I also wouldn’t want my dogs to get into it!!! 😱
@MakenzieHallie
@MakenzieHallie 4 жыл бұрын
So you need to scrape the glass mud out after the water settles, put that into a small plastic bin with a lid and dump the water in the woods as it will have small glass particles in it inevitably! Don't overthink it. Glass mud in a bin, dirty water in the woods.
@aliiiiibaby
@aliiiiibaby 4 жыл бұрын
Hey when you did the veins, did you do a bead?
@davidmiller7065
@davidmiller7065 3 жыл бұрын
Like your demo of the saw... Trying to get past the cost output so that I am willing to buy it since I am strictly a hobbies and cannot recoup investment
@MakenzieHallie
@MakenzieHallie 3 жыл бұрын
Thank you!! It is absolutely not a cheap item, and it's such a rare case use that it's something to really think about for sure!!
@anarchyfarms
@anarchyfarms Жыл бұрын
Mine doesn't either 😢 just opened it up and now I'm scrambling to figure it out
@MakenzieHallie
@MakenzieHallie Жыл бұрын
Dont panic, its easy to fill up now that we kno what to do. So idk why, but they removed the line from all of them. So the manufacturer said its roughly one gallon or half way up the blue pulley. ♡♡☆☆ ♡♡
@anarchyfarms
@anarchyfarms Жыл бұрын
@@MakenzieHallie ty think I'm gonna give it a try 🖤
@MakenzieHallie
@MakenzieHallie Жыл бұрын
You can do it. Just fillbit halfway up that pully and youll be all set. ♡
@anarchyfarms
@anarchyfarms Жыл бұрын
So I been playing w/it what's the best way to keep your cut lines w/all the water?
@handmade-g5m
@handmade-g5m Жыл бұрын
Hi, what do you think of lead free solder? Great vid😊
@AndreaStevens2012
@AndreaStevens2012 4 жыл бұрын
Cool tool! Thanks for sharing! I did not see you sand or smooth the edges before you foiled; did you do that behind the scenes or was it not necessary? TIA! Oh, do you have a vid on how you attach a hanging mechanism, i.e. rings?
@MakenzieHallie
@MakenzieHallie 4 жыл бұрын
Not necessary because this machine does grind your edges! And yes I do, on my soldering videos or any of my actual making stained glass videos! Thank you for watching!
@lindaballard3250
@lindaballard3250 4 жыл бұрын
Where do you buy your glass? I love all your videos learned a lot from them.
@MakenzieHallie
@MakenzieHallie 4 жыл бұрын
I have shopping videos on my channel that show the store in Massachusetts! 🖤 toy town
@monikajones2614
@monikajones2614 4 жыл бұрын
Mine never had a water line either!
@MakenzieHallie
@MakenzieHallie 4 жыл бұрын
So annoying right!? Apparently they stopped marking them all, just fill it half way up that bottom most blue pulley!
@momo95687
@momo95687 3 жыл бұрын
What’s your opinion on the accessory pack? Nice extra or unnecessary??
@violetamatyas4112
@violetamatyas4112 2 жыл бұрын
Wow
@lena990
@lena990 4 жыл бұрын
Do you have to patina If you use silver back tape and silver solder? I don’t really know how important patina is or the use. Also there are different colors of patina, so do you match the color with the back of the tape?
@MakenzieHallie
@MakenzieHallie 4 жыл бұрын
You dont ever have to patina! Patina is for look only! I like black solder, so I patina alot of my work black! There is also copper patina, bronze, but it's all preference! But yes, if you want to patina or not, it should match the foil if the foil will be visible, for aesthetic reasons!
@sandyskobla3314
@sandyskobla3314 3 жыл бұрын
If you have a Ring saw do you need your grinder ?
@MakenzieHallie
@MakenzieHallie 3 жыл бұрын
Yes, absolutely still need that basic grinder. This is for the rare occasion very difficult, or no break pattern. Meant to simply cut out hard angles, not grind. It just so happens to do it by grinding, if that makes sense!
@sandyskobla3314
@sandyskobla3314 3 жыл бұрын
@@MakenzieHallie Thanks ..😊
@SharonsPix
@SharonsPix 3 жыл бұрын
Mine doesn’t have a water line either. So…1 gallon or 2 fingers deep? Fingers are different sizes!
@MakenzieHallie
@MakenzieHallie 3 жыл бұрын
Unfortunately they removed the water line from the design. I just stick with the manufacturer suggestions that I read here. That bottom pulley is our guide. 🤷‍♀️
@iamlennii6791
@iamlennii6791 3 жыл бұрын
I fuse glass, and I have an issue with glass snapping. I wonder if it's because the glass I use is thinner as your glass looks thicker. What is the thickness of your glass, please?
@MakenzieHallie
@MakenzieHallie 3 жыл бұрын
All glass is different thicknesses! cold or fusible. Most "common" being about 3mm. Also all glass breaks differently, according to that, texture and temperature made.
@monikajones2614
@monikajones2614 4 жыл бұрын
Thank you - I did ask where to fill it on Facebook. Thought your video was very good. How did you manage to keep the outline of the leaves without it washing off half way through? I use Vaseline. Cheers from Wales
@MakenzieHallie
@MakenzieHallie 4 жыл бұрын
Thank you so much! And I just use sharpie! Works fantastic but comes right off when you need it to!
@alphaeba2233
@alphaeba2233 3 жыл бұрын
Hey Girl - just got the Taurus ring saw and loved your intro vid on how to use it. I'm planning on using it for cutting jewelry out of China plates and I realize that will put more strain on the motor/saws. Just curious how long your's lasted for cutting stained glass...? XO
@MakenzieHallie
@MakenzieHallie 3 жыл бұрын
Hey there! Well that's tough. I have the gryphon zephyr too as well as two blades for each. So I've never really "gone through" a blade. I also use mine as intended for those random rare cuts so it's not a super often occurrence. What I'm getting at is I don't know I'm the best person to answer that yet. Lmfao. But from my experience, the blades hold up for a long time as long as it's takin care of!! Sorry I don't have a better answer lol!!!
@Angela-hx4th
@Angela-hx4th 4 жыл бұрын
Hi Makenzie, can you tell me what type of flux you use?
@MakenzieHallie
@MakenzieHallie 4 жыл бұрын
I use novacan liquid flux!
@teresabrewster5744
@teresabrewster5744 4 жыл бұрын
I’ve been shopping for a grinder, do you think this would act like a replacement for a grinder. Basically, if you could only invest in 1 tool would it be a grinder or the ring saw?
@MakenzieHallie
@MakenzieHallie 4 жыл бұрын
Absolutely not! This is not a grinder, it cuts shapes, you need a grinder for all edges!
@mellisa9459
@mellisa9459 4 жыл бұрын
I put it in a box or cut a tote to keep the water and glass sand contained
@susangreen3370
@susangreen3370 2 жыл бұрын
Are you using the standard blade or the slim blade..just bought one of these yesterday. So excited to use it.
@bonnienieman3414
@bonnienieman3414 3 жыл бұрын
Kudos to you! You did an awesome job especially for the first time! What did you use to make the marks stay on the glass ? My marks wash off almost immediately, I have used Chapstick over a marker, white paint pens and even tried Vaseline, only to lose my mark part way thru the cuts !What's your secret>
@Yvonne.Englert_Art
@Yvonne.Englert_Art 3 жыл бұрын
are you using this saw now for your art or do you still work with the normal glas cutter?
@MakenzieHallie
@MakenzieHallie 3 жыл бұрын
This is not a replacement/doesn't do what a glass cutter does. This is for the occasional cuts you cannot possibly make any other way.
@Yvonne.Englert_Art
@Yvonne.Englert_Art 3 жыл бұрын
@@MakenzieHallie ah okay :) thank you for your quick answer . Greetings from germany
@MakenzieHallie
@MakenzieHallie 3 жыл бұрын
Welcome!!! Love Germany, my husband got stationed in baumholder for a couple years!
@Artsrock36
@Artsrock36 4 жыл бұрын
Just got this saw and I'm wondering do I still need to grind pieces after cutting with it?
@jmikronis7376
@jmikronis7376 4 жыл бұрын
I would think not. Wow!
@MICHELLEEVANS33
@MICHELLEEVANS33 Жыл бұрын
Love❤
@Crabtakular
@Crabtakular 4 жыл бұрын
So, it's been a few months. How's that blade?
@MakenzieHallie
@MakenzieHallie 4 жыл бұрын
Both blades are still great!!
Best Results Using A Taurus 3 Ring Saw V269
20:33
Gomm Stained Glass
Рет қаралды 10 М.
VIP ACCESS
00:47
Natan por Aí
Рет қаралды 30 МЛН
Что-что Мурсдей говорит? 💭 #симбочка #симба #мурсдей
00:19
Stanley №78 restoration
18:51
GR Woodworking
Рет қаралды 9 М.
Gryphon Ring Saw Tips - For the mosaic or stained glass artist
6:59
What it ACTUALLY costs to START STAINED GLASS!?
28:25
Makenzie Hallie
Рет қаралды 11 М.
Leaded Glass Vertical Lollypop Spinner!!
1:18:27
Bill Stone's Stained Glass Creations
Рет қаралды 3 М.
Gryphon Ring Saw For Stained Glass and Mosaics
18:13
Treasury Road
Рет қаралды 2,5 М.
Stained Glass Basics (How To Copper Foil A Beginner Panel)
26:33
MrStainedGlass
Рет қаралды 93 М.
TAURUS RING SAW 3 Blade changing- THE EASY WAY!
15:57
Makenzie Hallie
Рет қаралды 9 М.
TESTING THE CUTTERS MATE MINI EXTRA! Stained glass cutting tools!
21:33
VIP ACCESS
00:47
Natan por Aí
Рет қаралды 30 МЛН