Making a 4 Stroke Engine. Episode 2 - Gear & Valve

[@MakerB]

Episode 3 : Crankshaft and Camshaft kzbin.info/www/bejne/aqGsgaWomNyAZqc Episode 4 : Engine Block and Cylinder Head kzbin.info/www/bejne/nHaxiqiZfJZ4j8U Episode 5 : Carburetor, Flywheel kzbin.info/www/bejne/bWXWh5qihahsodE Episode 6 : Final Assembly and First Run kzbin.info/www/bejne/n6TYnKaErtZ_oJo Episode 1 : Piston and Connecting Rod kzbin.info/www/bejne/jpvPh5p4jsqbZsU Episode 2 : Gear & Valve kzbin.info/www/bejne/bIikeKadmaeZipI

[@hendroprasetyo9814]

That's what I love. No music, just some of assembly noise.

[@stratocaster1greg]

I have been making sprockets for chain drive toy steam trucks. Using my Atlas shaper its a long process. I use a Southbend Indexing Center and manually crank it around for the next tooth. I also ground the form tool. I am amazed how fast you made those gears and your little lathe indexed itself for each cut. Thats a big accomplishment making gears. Hats off to you young man. The world needs more like you. God Bless Us All.

[@webdes03]

There's something so soothing and relaxing about watching these. Amazing work, and the attention to detail is 10/10.

[@MakerB]

Glad you liked it!!!

[@baguettefish]

The attention to detail isn't 10/10 but 100/10

[@amsaveni8065]

You are the one who is not forcing to subscribe. Makes very accurate,even small gears. Thank you so much 😊

[@Machtri343]

These are soooo freaking cool to watch. Just the level of meticulous accuracy required and the super pleasing payoff is just so fascinating

[@MrAlex3461]

Machtri look up “Brunel and the dawn of precision”

[@jho3623]

Ill be 190yrs old before i grasp this kind of patience. Amazing work.

[@hifiteen49]

you don't need a lot of patience, you can just grab a magazine while it's doing it's thing. As long as you stay near for safety and glance over every now and then you're good.

[@Samford404]

I wish I could see daily videos on your channel, the are so peaceful and nice to watch.

[@pjhalchemy]

Really nice chips! Almost perfect cutting! Enjoyed this very much. Looking forward to more and the final!

[@MakerB]

Glad you enjoyed it!!

[@corlucassen1064]

Beautiful video showing beautiful produced products.

[@hifiteen49]

I gotta say; This is amazing. Thanks for existing.

[@nocnylis5904]

It is chilling af!! please more!

[@thisolesignguy2733]

Man I love to watch you work, the tolerances are just so precise they have to be +/- .0001 or better. It's just an extreme pleasure. Please keep making more!

[@MakerB]

Glad you liked it!!!

[@alvarop5464]

WoW, this video is very relaxing

[@Welcometofacsistube]

As a professional machinist, you do great work

[@musamazhit7653]

hello from Germany!! Your videos are awesome

[@machab2810]

Awesome project!

[@brucebello9892]

Love your videos, thank you!

[@MakerB]

Glad you liked it!!

[@rebmcr]

Her: Come over Me: I'm busy milling metal parts Her: My parents aren't home Me: 1:05

[@andrenovelliromansl]

Hahahahah

[@easymedia7988]

🤣

[@devonfretwell3351]

So funny🙄

[@mrbeats8991]

💀💀😂

[@alexanderbanman9288]

I'm enjoying these.

[@exocat4164]

I find it interesting that he decided to have the valve guides and the valve seats combined in one piece. There's nothing wrong with it, it's just kinda neat

[@housdrmoon]

very delicate work!!

[@Templarfreak]

as a pretty big mechanical noob, holy shit. i did not know you can just _cut a gear_ like that, i always assumed they had to be molded or cut in a more slow-and-old-fashioned way (like, cut out a tooth, _then_ rotate, then cut out the next, _then_ rotate, etc). that actually kinda blew my mind how that just _works_

[@maianbaaii]

can't wait thw whole ep..✌️😁👍

[@xile6]

Like i know the machine does 95% if the work. but you till have to tell it what to do and plan out all the dimension. great job. thumbs up

[@fabricio512]

That's my type of ASMR haha

[@craigjones2015]

I can't wait to see it run

[@BXBvlog]

👍👍

[@Bickybo]

An awesome skill!

[@DumbCarGuy]

Maker B should put a counter on his on/off switch. I bet the number would be staggering.

[@humancattoy7767]

I think you just made Westley Treat weep with envy.

[@JohnSmith-ey6zs]

I'm loving that lathe chuck that you can seamlessly interchange as a workholding vise with all your other machinery. What the hell is that setup?

[@wow-hn5qc]

숨은 고인물 이셨군요...

[@kendrijosebarbershop6218]

Que gran trabajo me encanta ver estos video algún día quisiera tener mi taller así con todas sus cosas para hacer cosas así

[@misterhash9329]

Already subscribed and waiting for the next video :)

[@coilmotorworks]

Great videos! I hope this inspires someone to try out this great hobby!

[@radosawbrzezinski4161]

Well it did, im setting up workshop Do you know where i can get plans for an engine?

[@coilmotorworks]

@@radosawbrzezinski4161 Do a search for Bob Shores on ebay. There are some reasonably priced casting kits with plans. Bob Shores was a great man who produced some fantastic engines and kits so anyone could build them.

[@janwiedemeijer]

Fascinating!!!

[@MuhammadDaudkhanTV100]

Excellent working good experience

[@derekgee4223]

Great video , thanks for sharing. Would like to know what equipment you are using

[@ohken2619]

I am very interested in the process of making and the role of machine tools!

[@bimacz]

Gresy video ! Thx ! I love it❤️

[@zihwaza]

빨리 다음거 주세요!!

[@soolsamchon]

어허이 ㅋㅋㅋ 드뎌 여기 오셨군여 ~

[@jimmy2times]

What milling and lathe machines are you using?

[@YooProjects]

Amazing project! Thx 🍻👍🤩

[@satrialindu322]

Hi my from indonesia,I Like You Video

[@thetruejay20]

Impressive

[@MyxamopMike]

Could you show us a picture or explain how you mounted the tool post to the sherline lathe, I have their lathe but i cant figure out how to mount the tool post.

[@David-yo5ws]

It's gearing up to be a great engine. ;-)

[@rayhanpattuary1870]

bro plz make this type of content It will grow ur channel very fast

[@muralirao5481]

Please make part 3

[@asicerik]

I love watching these videos. Makes me want to go out and buy a lathe! One question, I don't see you taking any measurements. Are those all off camera? Or are you using the lathe dials? Thanks

[@alexrogers9086]

Probably a bit of both

[@risingsunflagsamemeaningas7472]

It's hard to make without a measuring instrument. (Vernier Calipers, micrometers) Precision tolerance is mandatory

[@f250freak6]

I wanna see this little engine an action

[@who_is_john_galt]

I didn't understand where the mixture is gonna come in from that valve housing... Are you going to mill an opening on the side of it later?

[@camaroboy383]

I was thinking the same thing initially, but if I had to guess, he will secure the seats/guides into the cylinder head, then machine the ports after assembly...

[@jagooding]

What rotary axis / indexer are you using for milling the teeth?

[@crisp4085]

Where do you get your round bar its soo hard to find in australia

[@rock3tcatU233]

I'm jealous of lathe people, working a lathe seems so satisfying compared to a mill.

[@suliemanalfuhaid1447]

What keeps the valve from leaking

[@tonyrigg9182]

Can i ask what lathe you are using please ?

[@firearmsstudent]

Will there be plans available? I have some bigger machines and a 2x or 3x would be neat to build.

[@ปั๊บซี่น๊ะค๊ะ]

ดีมากเลยครับ ผมชอบมาก ทำต่อไปนะครับ

[@thetraitor3852]

It looks absolutely amazing. I am looking forward to see future parts. Just curious, why didn't you use piston rings in the previous video?

[@keenices1972]

Maybe he would use them later.

[@David-yo5ws]

@Eddie Hitler Thanks, had a little noesy. 👀

[@playlistkurniawan2318]

What lathe machine do you use?

[@Epicalogical]

Great video. What is the machine called that is used to cut the gears?

[@elburropeligroso4689]

It's an electric rotary table/indexing head. Manual indexing heads are fairly common and have a specific numbers holes on a plate that correspond to the number of teeth you might be looking to cut on a gear. Look up Chris and his channel, ClickSpring. He has a video on manual indexing/dividing.

[@Epicalogical]

@@elburropeligroso4689 Thank you, I will check out that channel

[@elburropeligroso4689]

@@Epicalogical Here is an indexing/dividing head. www.grizzly.com/products/grizzly-dividing-head-bs-1/g1054

[@jacojansevanrensburg6588]

Awesome video. Can you please tell me the name of the lathe

[@krishnasubramanyam8629]

Pray tell us this.... are these cuttings and drills involve a precision computer program? if so, please share the details.

[@zugly1999]

what kind of gear tooth profile are you using? The size of the cutter looks like its a cycloidal cutter that's used in watchmaking, but i assume you're using the normal involute tooth profile.

[@BXBvlog]

👍👍

[@ivx.chronos2131]

What brand name is the lathe ur using😮

[@CShellby]

Have you ever make any engines before? I also love your videos! Good work!!

[@curtiswilcock5628]

Is this a full size mill or like a bench top mill

[@halfnelson6115]

Are those clock making tools? I've never seen lathes or mills like that before.

[@marceloho1984]

Yep. But in almost the cases, os easier and cheapier to buy tools and parts.

[@kevinstaddon8517]

Looks like Sherline

[@harrybeta]

Hi what’s your lathe&mill model is?

[@robertl5440]

Parabéns, peças perfeitas, maquinário magnífico.

[@anubisu1024]

I was so surprised when I saw the spinning part turned. I didn't know that mechanism even exists.

[@ramaaramaa]

Taig Micro lathe

[@bolb012]

Which lathe are you using

[@adyminiatur3404]

Where is the module knife?

[@ctrain226]

Cant wait to see this thing rip

[@KM6VV]

What gear cutter was used?

[@theavatar9375]

What's the type of your lathe machine sir?

[@David-yo5ws]

Just under the video is Maker B comments and there is a 'click' on saying"show more", click on that and it shows links to all the machinery.

[@jayeewayee3854]

So what lathe is this?

[@andrenovelliromansl]

Another great Episode! Counting down minutes to the next one. Amazing job with the lathe. Pls can you share your lathe model and brand?

[@Bazzdiver]

Take a look in the description ;)

[@andrenovelliromansl]

@@Bazzdiver thank you! I usually watch youtube videos on the tv so, I almost never see the description. Thanks for the tip! Amazing tools!!!

[@mechanicalengineeringboile4389]

Nice video

[@RC_Club]

hi ! please share the plans of the engine !

[@테크킹의복잡한세상읽]

Gold Hands....진짜 최고 금손.....ㄷㄷㄷ

[@mrbluetick2]

Are there Cad files or prints for this ?

[@pierrelcq3226]

C'est possible d'en faire un à plusieurs cylindre ?

[@pierrickreveillere3768]

Tout est possible, mais bon courage !

[@pierrelcq3226]

@@pierrickreveillere3768 après j'ai une question, c'est encore plus délicat qu'un moteur 4t à essence miniature, mais créer un micro moteur diesel c'est possible ? Le plus réaliste possible que les vrai ( pas comme les micro diesel avec la vis à serrer au dessus )

[@pierrickreveillere3768]

@@pierrelcq3226 je suis pas du tout spécialiste, mais il me semble que pour un diesel il faut un fort tôt de compression dans le cylindre pour faire augmenter la température suffisamment pour produire l'explosion. Je suis pas sûr qu'en miniaturisant toutes les pièces le moteur tienne bien longtemps.

[@pierrelcq3226]

@@pierrickreveillere3768 vous avez raison c'est bien ce qu'il me semblait... Merci !

[@soleman9133]

please details your cnc machine

[@1908ME1]

Hi, what DP did you use for the gears.

[@BXBvlog]

👍👍

[@robinsharma7777]

What is length

[@kentuckytrapper780]

What kind of lathe is that? It's very precise.

[@BXBvlog]

👍👍

[@muralimanohar8952]

@Maker B When will all the videos be out?

[@hyperrunner4589]

What is the name of cutting gear tool

[@JustDux]

Can you please tell models of your milling machine and lathe

[@David-yo5ws]

Just under the video is Maker B comments and there is a 'click' on saying"show more", click on that and it shows links to all the machinery.

[@samirsamir7779]

I love your videos , I subscribe , please what is the yellow metal used in the video and where to buy it ? thanks

[@BXBvlog]

👍👍

[@DD_yura]

天下のミツトヨじゃーん(工高生感)

[@karanapupravallika3570]

Ur videos are awesome and more interesting.😁.. Any one out there, i am mechanical engineering student could you suggest some you tube channels similar to this channel that might help me to gain more knowledge ... #from INDIA🇮🇳.

[@BXBvlog]

👍👍

[@moloymitra4164]

When is the part 3 coming???

[@ardaplbyk]

Good job ;)

[@julek43]

Gotta click the bell

[@nishithpshetty]

can u give me the plans of this engine plsssss.

[@zaferaksoy2775]

I like your works. I'm curious about the machines you use. I would be glad if you share your brand and model with me. I also want to buy these machines. practical and useful machines.

[@pierrickreveillere3768]

His tools are all in the info box below the video ;)

[@brielov]

I need more