Making a bead breaker tool - Safe way to break a tire bead and wont damage your wheel.

Making a bead breaker tool that fits on any rim. This is the easyest way to break a tire bead without damaging your rim.
Cum se construieste o presa pentru dejantat anvelope de tractor. tel: [phone]

[@MrFehmin]

Works and looks great doing it

[@screwsnutsandbolts]

Good job 👍

[@DorelBorlea]

Thanks!

[@screwsnutsandbolts]

@@DorelBorlea You're welcome ! :)

[@vamshivamshi7545]

It's very nice

[@topsgeneralautomechanicdie8422]

Good job sir, shout out..

[@umarsaddiq614cod6]

very good

[@DIYFixMan]

nice

[@Bintikers]

Nice 👍

[@ahmetkopar4042]

Thanks for the video, a useful visual I am writing from Turkey. What is the exact dimensions I want to do?

[@PotaoItapira]

How could I measure the parts? I'm from Brazil... thank’s!!!

[@DorelBorlea]

Hi! Bead breaker tool dimensions: 15 cm the bolt with square thread and normal thread. Nut with square thread 2 cm, 10 cm inner tube, 12 cm outer tube. The other parts are approximate dimensions.

[@sayyedsahilsayyedsahil593]

बोहोत अछा है

[@dnyaneshwarpawar3399]

सर जी आपका धन्यवाद 🙏🙏

[@homer1033]

Hi could you sell the spiralled section with the collar as i don't have a lathe and would love to make one of these pls.

[@rktayar8878]

How much is this bed breaker and where to get it, how to get it

[@catalinandrei4458]

Bravo e genial ce ai facut !

[@DorelBorlea]

Multumesc. Este o unealta foarte folositoare. Ajuta foarte mult la dejantarea unui cauciuc lipit de janta.

[@catalinandrei4458]

Cat ar costa una !

[@DorelBorlea]

@@catalinandrei4458 Eu fac o presa din aceasta cu 300 lei

[@jesusarmandogomezbarrios8736]

Medidas de todo lo que se ocupa para Acer lo

[@paulwoort3420]

Is there any chance of purchasing one good stuff

[@DorelBorlea]

Unfortunately, I cannot send such presses abroad. I build and sell them only in my country.

[@user-rz8bl9ec9q]

Hello, I am glad to see a video like this. I saw that your tire repair tool is very practical for me. I would like to buy such a tool. I am in Italy, how can I buy such a tool. Hope to get it Your help.

[@DorelBorlea]

Hi. I'm not sure where you can buy a tool like this. I built mine. I think you can find it on Amazon.

[@user-rz8bl9ec9q]

@@DorelBorlea Do you have a link to Amazon? Can you send it to me?

[@DorelBorlea]

@@user-rz8bl9ec9q search on google about bead breaker tool.

[@user-rz8bl9ec9q]

@@DorelBorlea Thank you very much, I found it,

[@DorelBorlea]

@@user-rz8bl9ec9q ok

[@antonionilsondiasmaico2110]

tem como manda as medidas de tudo

[@paulwoort3420]

Hello thanks for ur prop reply, what about instructions on making one. I strip cars 🚗 and do scrap I get a lot of cars with tyres on rim ur tool would be really handy, look forward to ur reply. Cheers

[@DorelBorlea]

You have to be creative. To build this tool you dont need any instructions. If you watch carefully , you will understand how I built this tool.

[@BATMEX44]

@Kareem Derek worked.! THANKS YOU DESERVE A BEER..!

[@maximilianwang8628]

hi, my friends seems in fond of your tools and who is interested of purchasing the tool set, please advise if they are for sale and if they can be shipped to Taiwan, thank you.

[@DorelBorlea]

Hi! This is a video where you can find information on how to build a bead breaker tool. I do not sale this tools.

[@paulwoort3420]

👍👍

[@JishanKhan-ps9wy]

Ham app sa khridna chai bna bnaiya to kha milaga

[@kostasf1132]

can you please tell me the size of each iron u used?? tell me the full list of sizes u used for this tool

[@DorelBorlea]

There are many parts that need to be measured. I made the outer square 13 cm long, the inner square 10 cm long. The final height of the bead breaker tool is 15 cm.

[@ivalter24]

Отличный вариант бортировщика.👍👍👍

[@valdenirvicente4221]

Como poço comprar

[@adickp3729]

Bg itu alat nya beli apa buat sendiri ya bg

[@vamshivamshi7545]

How much the price

[@r.psahawar1103]

Bhai iska price kya hai

[@adickp3729]

Saya dari indonesia di mna di jual alat ini

[@eng.hardayalparihar7478]

Beed breker ki rate kya h

[@butterfinger1171]

I guess everbody has an industrial lathe in there garage

[@DorelBorlea]

Anyone who needs an industrial lathe buys one. They are old machines but quite cheap.

[@migueldejesusdasilva9750]

Mostra o medida dás pessas

[@Shreedadajityres]

Sir mujhe ye chahiye

[@farukhsk7231]

यह कितने का मिलेगा और और का अर्डर का कल भेजेगी क्या

[@santoshgurikar6846]

How much price

[@mohitsinghsisodiathakur2417]

Kese milega

[@proverman]

Where do you get the course threaded bolts, what are they called.

[@DorelBorlea]

Hi! I've made them on lathe.

[@ZAPATTUBE]

It is called "Acme Thread" and you can get rod already threaded at a machine shop.

[@SunnyKumar-fc6wi]

Ye khaa milega

[@machi8332]

Can you please send me measurements

[@DorelBorlea]

Hello. I have no exact measurements.

[@wilbertgerardofuentespizar5737]

Porfa necesito las medidas e cada parte para hacerla aca en Costa Rica ,o dnd se vende aquí

[@DorelBorlea]

¿Por qué necesita todas las piezas medidas? Use su imaginación. Intente hacer algo similar y funcionará. No es necesario seguir determinadas medidas. Puedes hacerlo más pequeño o más grande. De todos modos, hay demasiadas cosas que medir. Intente construir esta herramienta, no tiene que verse exactamente así. Éxito.

[@wilbertgerardofuentespizar5737]

Gracias así sera

[@DorelBorlea]

@@wilbertgerardofuentespizar5737 ok ;)

[@MariaHernandez-xt8fq]

@@wilbertgerardofuentespizar5737 si le funsiono la erramien sila iso o no

[@wilbertgerardofuentespizar5737]

@@MariaHernandez-xt8fq necesito las medidas para hacerla igual esa esta excelente

[@bhubneshkumar748]

Kaha milega

[@breezybmetal8646]

Nice video- you need a new vise

[@ibsmohas11]

Am from ghana how can i get that?

[@DorelBorlea]

You have to build it.

[@katalinilles786]

am nevoioe o presa

[@MohanRaj-sw3br]

Price Yevvalavu bro

[@chuckmiller9469]

Cool I feel like dancing

[@ramiro78380]

good job but you confuse everything when you fab all at once you need to do one every time

[@DorelBorlea]

Thanks. Indeed this video is a bit confusing because I worked at 3 bead breaker tools at once.

[@amoldivate6163]

Price Sir

[@migueldejesusdasilva9750]

Cuale a medidas

[@antonionilsondiasmaico2110]

quanto metro de ferro

[@amoldivate6163]

Price

[@balog7909]

Hello bhai meri lei bhi banana hai bid barik

[@gulfamkhan7513]

Product online online milegi

[@tanajivalekar6985]

Hame chahiye bhej doge kya

[@alexsimionca4082]

De unde sunteți?

[@DorelBorlea]

Arad

[@emanoil86]

misto copie! ai ciordito de la americani!?

[@DorelBorlea]

Nu am ciordit-o , doar m-am inspirat de la americani.

[@emanoil86]

@@DorelBorlea prin a ciordi nu vroiam sa te jicnesc, a fost o gluma. Si eu am facut acea presa de dejantat in urma cu vreo 2 ani si este foarte utila

[@DorelBorlea]

Am inteles. ;) Este foarte utila o astfel de presa, daca ai rabdare si iti place sa mesteresti prin atelier eu zic ca se merita sa iti constuiesti una.

[@vamshivamshi7545]

I want 1 pice

[@pouniyaboyrj0569]

Sir home delivery is possible.

[@DorelBorlea]

You have to try to build it. I do not sale this product.

[@pouniyaboyrj0569]

@@DorelBorlea Get this item home delivered. How much money will it cost?

[@DorelBorlea]

@@pouniyaboyrj0569 I don't know.

[@jrstuts527]

Kitne mai milega

[@babulalkeer5061]

हेलो भाई साहब यह जुगाड़ मेरे को भी चाहिए आप भेज सकते हो क्या कितने में पड़ेगा बता दें

[@dharmendrasingh8151]

Machine kitne me beach rahobho

[@sannykumar7432]

kha milega Bhai

[@atoztyrerepair6555]

Mere ko Lena ha ji

[@edvaldosilva4996]

Boa tarde eu moro no Maranhão sou borracheiro conte essa máquina aí que você tava fazendo pelo Facebook não viu é no KZbin e manda o seu telefone para mim por favor para nós negociar eu quero comprar uma dessa aí para mim vou ter uma boa tarde de pneu

[@tajpaltajpal9336]

यह कहां पर मिलेगा मुझे भी चाहिए

[@technicalhardwark4119]

Tayer दुकान पर ऎसी समान बिकना चाहिए पर मिलता नहीं है इनका कारीगरी बहुत अच्छा है

[@DorelBorlea]

मुझे खुशी है कि आपको यह उत्पाद पसंद आया। दुर्भाग्य से यह विपणन के लिए नहीं बनाया गया है। ;)

[@mdzakir688]

Sar no mily ga

[@gulabchandsaini9666]

bhai is video ka mo.no.do please jisne ye bnaya h jldi se

[@DorelBorlea]

mujhe kshama karen, lekin mujhe samajh mein nahin aaya ki aapaka kya matalab hai. agar aap angrejee mein likh sakate the

[@armanali5389]

Haw money selling price 1pi

[@DEEPAKKUMAR-pw1if]

Yee kaha milega contact 📞 do yrrr

[@balog7909]

Aap ka nubar bejna

[@kumarbonky6018]

Mb no de

[@shona5512]

What a blatant rip off of SixtyFiveFords bead breaker.

[@rabindarkumarmehta1324]

Kitna price ha lana ha mobile number dhega

[@eng.hardayalparihar7478]

Aapke mo.no. kya h

[@dssonivloger405]

आपके फोन नं मिल सकते हैं क्या मुझे चाहिए यह बीड ब्रेकर

[@DorelBorlea]

नमस्ते। दुर्भाग्य से, मैं बिक्री के लिए नहीं बनाता। यदि आप कड़ी मेहनत करेंगे तो आप स्वयं ही यह उपकरण बनाने में सफल हो जायेंगे। ;)

[@dssonivloger405]

@@DorelBorlea मेने बना लिया सिर्फ 500 रु का खर्च आया और एक दम सही से काम करता है दो दिन पहले ही बनाया

[@guspompa3283]

Super bad video to fast and not education at all don't do that no mor

[@DorelBorlea]

In this video I showed how I built a bead breaker tool. The original lenght of this video was around 2 hours. Nobody watches such a video for 2 hours.

[@rajeshwargavali6343]

@@DorelBorlea best कहा बिकत मिलेगा

[@siddhusatpute5741]

आपका नंबर भेज दो

[@nelsonlanes2612]

Una porqueria

[@DorelBorlea]

¿Por qué piensas eso?

[@mrcoz1764]

All that steel and welding to make something that can be done in 2 mins,,,,,,take the tire off the car,,,,,,put a small block of wood next to the rim,,,,put the tire under the rotor/drum,,,,,and lower the car,,,,,bingo bead broken

[@DorelBorlea]

Your method works fine for truck tires. If you do the same with a tractor tire you are the best. ;)

[@oby-1607]

Can't always use the car or tractor or atv to apply pressure to break the bead. Make the tool and it will be there waiting forever unless you lend it out and forget who borrowed it.

[@ridgerunner106]

Nope, I've had 10,000 pound truck jacked up off ground to break some beads, and had to let it sit 30 minutes before it broke. Hard to cut off with grinder an not cut rim. I will build one for me. plus you can get a tube out of a tractor rear without taking the rim off tractor. Do that in your two minutes.

[@fredhinck8847]

Dumb ass comment. The tire can be removed without taking it off the vehicle, like a tractor rear wheel.

[@paulbrandt1832]

Yea what a douche

[@tonydize3944]

What's the purpose of this video its not like we van build one like at home if i had the tools I won't need a video on how to

[@DorelBorlea]

I think that such a video is useful for some and for others it is a waste of time.

[@rktayar8878]

How much is this bed breaker and where to get it, how to get it