Making A Custom Carved Noodle Board - Using Our Noodle Boards Set

[@oldave100]

Transfer Process - www.youtube.com/watch?v=-Ig62... Noodle Board Set - makeawoodsign.com/products/no... Router Bit Depth Gauge - make-a-wood-sign.myshopify.co... Base Plates - makeawoodsign.com/collections... Router Bits - makeawoodsign.com/collections... Dewalt Router - amzn.to/3V6hM5C Milwaukee Router - amzn.to/3RIb02O DeWalt Disc Sander - amzn.to/3e4aUVL DeWalt Random Orbital Sander - amzn.to/3Cyo7PM Spray Primer - amzn.to/3RGcXwT Spray Clear Coat - amzn.to/3EgYS61 Our website for Sign Carving Supplies: www.makeawoodsign.com/shop/

[@sncpageable]

Exactly what I needed! Thank you! I’m glad I got to see this up close and personal. Beautiful!

[@oldave100]

Thanks Miss Carmen!

[@PopsCustomSignsLLC]

Nice noodle board! I'm sure the Queen loves it!!! And Sherlock seems to like it too.

[@oldave100]

Thanks buddy. Yeah Vicki and Sherlock both like it.

[@CourtneyDulany]

Thanks for carving text without a CNC! They are cool tools, but not everybody can afford them. Other than picking up a couple of router bits, I can use the tools in my garage shop to do this. You have another subscriber!!!!

[@oldave100]

Thanks so much, we really appreciate the sub and the kind words. Happy you found us and like what we do. If I can answer any specific questions for you just let me know. My direct email is [e-mail].

[@colbylittlepage5659]

Looks like the cat's pretty happy with it too.

[@oldave100]

Yep, Sherlock walks on it all the time

[@garyzellner9938]

Very appealing product... Love it !

[@oldave100]

Thank you Gary ❤

[@pamelaberry4520]

Looks beautiful.

[@oldave100]

Thank you Miss Pam ❤

[@SawdustmakerLori]

I love how that turned out and I'm sure Vicki and Sherlock were thrilled with it!!! Using the black Starbond really added a decorative touch to it. That was a great idea!

[@oldave100]

Thank you Miss Lori ❤

[@markduggan3451]

That looks great.

[@oldave100]

Thank you buddy ❤

[@billlarrabee9436]

Great idea, great work!

[@oldave100]

Thank you Bill ❤

[@vernonekstrom4320]

LOOKS GOOD

[@oldave100]

Thank you buddy ❤

[@bernadetteherriage2748]

That is SO beautiful! You guys are just amazing, what a gift you both have from God! Gotta keep Vicki happy 🤣 and love the song by Will Harrison, Headin Downtown…..I really like his music! Love and miss you guys, God bless! ❤️❤️❤️❤️

[@oldave100]

Thank you Miss Bernie ❤ Love and miss you guys too.

[@DesertBumWoodWorkn]

That's nice, I like the black ends it makes it stand out as well as the inside black superglue, my Wife has wanted on as well, coming soon. also if you have a pilot light for the burners be carful, fire and wood don't like each other

[@oldave100]

Thanks so much ❤ . Yeah no constant pilot light....

[@robertspina4503]

Looks great

[@oldave100]

Thank you Bob ❤

[@rickmadison7241]

Looked great...

[@oldave100]

Thank you Rick ❤

[@ronaldoestmann8507]

Nice board I love it.

[@oldave100]

Thank you Ron ❤

[@Pete.Ty1]

👍👍👍 Thanks lads.

[@oldave100]

Thank you Pete ❤

[@ronbeard8856]

Very nice work

[@oldave100]

Thanks, Ron!

[@traceydetwiler9552]

Great job came out great I stopped making them thinking of getting back on them

[@oldave100]

Glad you like it Tracey ❤

[@Aaronlewis8846]

That turned out really nice.!! Another great project by you guys!!

[@oldave100]

Thanks, Steven!!

[@danyodice1048]

Nice job EZ E...🤘🤘🤘

[@oldave100]

Thank you Dano...

[@k9kayaks]

I have a lot of friends that would love that sign they are definitely Cat Lovers Sign turned out great

[@oldave100]

Thank you Ben ❤, we were really happy with this one

[@midstaterustics4507]

Nice job guys, I have been contemplating starting to make these to take along to craft shows. Just might have to give it a shot some time.

[@oldave100]

Thank you Don ❤

[@greggordon6215]

Cool video and a great idea on expanding out to different projects (especially with making the templates for sale). I also loved the shout out you got from 731 woodworks yesterday on the router plates!

[@oldave100]

Thank you Greg ❤. Yeah it was so cool how Matt gave us a great promo. I love that guy.

[@gigiscustomwoodsigns5471]

Absolutely Love how y'alls turned out💖 These was big sellers for me but I didn't make my handles and back splash like y'all did, I just bought my handles but I definitely will be buying y'alls templates because I Absolutely Love this look expecially with the resin..Great Video💖

[@oldave100]

Hey GiGI, great to hear from you❤. Happy you liked this... We were all happy with how this turned out (especially Sherlock 😂) Thank you so much. Big Hugs from me and Vicki ❤❤❤

[@tomstone2322]

Nice work! I’ve made a few noodle boards but not like this. Really like I you incorporated what you do best

[@oldave100]

Thank you Tom ❤

[@Mrwolfpack85]

Just got asked to make a NB, but nobody does it with the carving. Except y’all of course! Couldn’t see doing this if it didn’t have some sort of design carved into it. I blame that on y’all! 😜. Any concern with the resin pooling up in the corners where the wood meets, or does it level out pretty good? Thanks as always, y’all are the best!

[@oldave100]

😂😂😂 as long as the board is level, it should flow just fine. You might have to mess with it a little bit but not too much

[@ademanse3922]

Brill

[@oldave100]

Thank you my friend ❤

[@robperron5511]

Awesome video ( as always ) ... the black was a great idea for the space.. any idea what you could sell those for in your area?

[@oldave100]

Haven't really researched that. I would think $150 ish....

[@rwardlaw1]

Great job! What determines the depth you carve out? Whats the deepest youve carved out in a sign?

[@oldave100]

It's a lot more about the width of the cut than the depth. Because most of our bits ar V groove, the deeper you cut, the wider the cut. We use our depth gauge which you can get here makeawoodsign.com/products/router-bit-depth-gauge?_pos=1&_psq=depth&_ss=e&_v=1.0 to determine how deep we're going. Generally, we try to stay right about 1/4" except for the carving liner which can only cut 1/8" at a time.

[@gaylewilliams7353]

Love this! What font(s) did you use? Thanks for another great video!

[@oldave100]

Thank you Miss Gayle ❤

[@its4electric]

Hey that Awesome what kind of resin did you use And did you use it to fill in the carving

[@oldave100]

Thank you James ❤ We used "Super Gloss" brand resin, love it. The black was just our normal black spray primer. Then a flood coat of resin.

[@garyzellner9938]

Did you apply epoxy to the side rails of this board as well as the base?, If so, how did you accomplish that?

[@oldave100]

Yes we did. Vicki and I just moved it around with our hands. See the 12:28 mark in the video. Thank you Gary ❤

[@jacobserrano1709]

😮😮😮😮😮😮👍🏾👍🏾👍🏾👍🏾👍🏾

[@oldave100]

Thank you buddy ❤

[@mikeledee8786]

What kind or type of wood did you use? I noticed what looked like rabbits on the ends. Thanks

[@oldave100]

This was Blue Pine shiplap from home depot. We didn't use any rabbits on this project

[@theguitarpicker]

Beautiful! How much would that sell for?

[@oldave100]

It depends on where you're at, how much carving you're doing, and what kind of wood. In our situation, probably about $125 ish

[@mlrgenuine1]

I've been asked by multiple people to make one of these, but I've yet to follow through. Any concern on the safety of these? Especially on a gas stove? I fear someone burning their house down.

[@oldave100]

I would not put it o a stove that has a constant pilot light. Our is gas but it's electric pilot start.

[@carltonharvey3818]

Just wondering why you do not use sanding shellac

[@oldave100]

If you mean sanding sealer, we find that just a couple coats of clear coat works just as well and it doesn't take as long to dry. Plus it's easier to find than the sanding sealer

[@carltonharvey3818]

@@oldave100 I am new to your channel and really appreciate your way of teaching. I do not make signs but I do inlays on keepsake boxes. I am trying a freehand router after watching a few of your videos. I am limited to available poly patterns and want to use some of my own. When you say “clear coat “. What are you using? Or what video should I look for? Thank you “@thehikingwoodeorker

[@oldave100]

Thanks so much for watching and the nice compliments. For fast clear coat we just use a spray lacquer. The one we use most often is Rustolium clear spray can. If I can answer any other questions for you please let me know, [e-mail]

[@vernonekstrom4320]

not often you wear gloves when carving, COLD

[@oldave100]

Yep, not my favorite time of year....

[@RonSnayberger]

What is a noodle board and what is it used for.

[@oldave100]

That's what I said too...

[@garyzellner9938]

I put noodles on them .... and I got the strangest look from everyone.... aparently no one else knows the answer either .. seemed obvious to me by the name ....I think I must be mistaken.

[@oldave100]

😂😂😂

[@TheWwbartman354]

What resin did you use?

[@oldave100]

We used "Super Gloss" brand, great stuff

[@RonSnayberger]

DAH. Maybe I should read a little farther and I would find the answer. Sorry

[@oldave100]

😂😂😂