Legend says that if you are early kyle pins your comment
@tokeypokey6 жыл бұрын
Honda CR125 Motard legend says he only rides 4 strokes
@802Garage6 жыл бұрын
Wow you won.
@carlj59696 жыл бұрын
Not today!
@nxt_sean11686 жыл бұрын
MURKIN RANZYZ it sounds like we have a angry bitch
@murkinranzyz99616 жыл бұрын
Naysean Traylor Devlin oh don't talk about your sister like that you know she give free rides like a free shuttle bus lol
@samljones6 жыл бұрын
Your teacher is such a chill guy 👌🏻
@abrahamnakayama58656 жыл бұрын
Sam Jones I wish my welding teacher was as chill
@MartinDrescher956 жыл бұрын
Teacher is a really nice dude
@Ishliss20126 жыл бұрын
Big shoutout to your teacher! Really cool of him to do that and show interest in what you are doing! Lot of them would tell you to kick rocks. He’s a good guy!
@MumbleVlogs6 жыл бұрын
Now that’s a legit weight plate
@Fordman75756 жыл бұрын
If it was me I would make up some more substantial mounting brackets/gussets for that plate that run down the outside of the frame rails, in addition to the traction bar mount. That is a very heavy chunk of plate. If that breaks off going down the highway it could kill someone. That is not something to "It'll be fine" on. You want it to be rock solid with no chance of failure.
@MrTheHillfolk6 жыл бұрын
Fordman7575 When we were kids we used to ride down the road in the bed of a pickup and pitch our old car tires and watch em blast off into the woods. Or roll for a stupidly long time. What awesome power, seeing a 60’ tree shake back and forth!
@duanebailey62536 жыл бұрын
It has over 4 brace points not including the bar weld. you will notice it start to crack or vibrate when it starts to let go shouldn't be an issue. If he wasn't gonna add the front gusset/bars I'd be sketched out as well.
@tokirak6 жыл бұрын
He should at least test it by standing a couple of guys on it to check the strength of the supports holding it up
@SleeperHonda6 жыл бұрын
Hell yeah dude. You're civic is now really feeling like the Main Character for your channel. You got some cool stuff on her. Represent man! The weight plate/traction bar setup is freakin serious!
@PRANKurFACE6 жыл бұрын
It's nice to see a car channel take on multiple projects and actually show progress! One day my garage is gonna look like that. Right now all i have is an evo x but for sure want more cars.
@802Garage6 жыл бұрын
PRANKurFACE I have too many cars, but I hope my garage will start looking more like that soon! We share a dream. :)
@123dowhat6 жыл бұрын
An evo is still good car to have if only have one
@bernardmorris1256 жыл бұрын
Your teacher seems chill. My favorite thing about this channel is all the people that surround you. You have an amazing group of people, Kyle. Never let them go.
@dontalkbackk6 жыл бұрын
You're very fortunate to have all these good people in your life.
@timothystrunk73236 жыл бұрын
When ur done welding it paint or clear coat it so it doesn't start rusting
@noname-yb5jt Жыл бұрын
Popped up in my feed after watching your podcast interview in your garage.
@austinrobertson70676 жыл бұрын
You should give your welding teacher a ride in the hatch
@electronbeing54736 жыл бұрын
way too white.
@austinrobertson70676 жыл бұрын
electron being lmfao 🤣
@ryansmifh6 жыл бұрын
electron being you’re obviously waaaaaaay too black.
@wildkev10102 жыл бұрын
That guy seems like a really great teacher. Loves what he does and it shows.
@ashleighpollard54746 жыл бұрын
What a great teacher you have there Kyle, he really seems like he’s a good guy.. hi from Australia 👍👍
@RuinedSpec6 жыл бұрын
i've seen people put the battery in the front for weight but never a 1/2" plate. Goddamn Kyle, you magnificent bastard!
@yaz1156 жыл бұрын
Literally the best channel on KZbin
@freezEware6 жыл бұрын
It actually is wtf
@brandonparrott8906 жыл бұрын
I Am Sekou your a bitch
@yungschpluh57886 жыл бұрын
Yaz same
@802Garage6 жыл бұрын
Yaz 💯
@Y.T-476 жыл бұрын
" Sorry Ktuned " 😂
@mountaincarjunkie33076 жыл бұрын
YoungTurnUp 47 kyle has always been a savage
@smbaker846 жыл бұрын
that's cool of your teachers man. seems to be proud of you legit. keep at it man.. love the channel!
@Kj-bg3iw6 жыл бұрын
The traction plate looks pretty slick man, killer can vlog with your teacher giving a hand cutting stuff up. It's gonna be sick seeing the bumper on now lookin fresh af.
@TinaRussell-on1pq6 жыл бұрын
Hay Kyle i have a vtec h22 that’s getting scraped if I do a conversion in a Honda carb set up wat would I need to take out of the prelude with the vtec?? Like loom and how far back or ???? Need advise thanx man.
@alfredthethird52026 жыл бұрын
He was correct. Your tig welding is on point 👌
@nickhayes63016 жыл бұрын
Great video man good job on the measurements and installation. You are definitely legendary in my eyes you, pfi, Emilio all of y’all are great ppl and know how to shred shit up much love man
@Nwaboosted6 жыл бұрын
That looks so good and has multiple functions, GREAT JOB KYLE.
@nikolamaodus3026 жыл бұрын
That hatch looks incredibly good well done kyle
@tyeb.38986 жыл бұрын
Seems like a super chill instructor, you got lucky. Some are really smug, cheers Kyle 🤙 p.s. you should do a merch drop to fund a new welding setup... just a thought.
@cHefvEto16 жыл бұрын
When you treat people nice and put great energy into the world, great things are returned to you and you receive blessings just like being able to go back to your school.
@CaptnBeeBop6 жыл бұрын
Never heard of a weight plate, pretty cool
@GaZaai6 жыл бұрын
Awesome work Kyle! That bumper fits perfect now 👍
@richardculbertson80276 жыл бұрын
Kyle please sort out playlists for the different builds on the channel as I'm having trouble finding all the SW20 k series build
@tokeypokey6 жыл бұрын
Richard Culbertson the problem is that the cars are split up 1 video might have 3 different projects
@danielbrown70776 жыл бұрын
I'm definitely not a honda person, but love what you guys do to those things and the work that goes into them. Keep it up!
@prakticlej86776 жыл бұрын
Dang the hatch is really becoming a full fledged race car good job Kyle keep surprising us .
@jeep20036 жыл бұрын
Looks good man i think its going to need those extra supports thats alot of weight hangin out there. I drilled a hole in the back of my welder with a gromet and made a mount for an external spool.
@automafiaracing6 жыл бұрын
that is one hella heavy shin killer... def doubles as a great splitter.
@WeTryMotorsports6 жыл бұрын
Your welding teacher is cool af to let you so that. I want one of those machines
@twissracing5306 жыл бұрын
Awesome job Kyle!!! Looks so sick!
@jackhofalot67056 жыл бұрын
hell yea dude that thing looks fantastic! cant wait to see if it helps out!
@JAM43826 жыл бұрын
You should jack it up and also run several beads or the entire length to the underside of the plate to the traction bar as well. Also with the amount of room you have with the bumper cover on and the amount of extra steel plate you have left over you could have your teacher cut several smaller plates (like 4-5” x 34”) You could then drill that main plate for 2 3/4” x 6” or bigger bolts and then weld them to the main plate and you’ll have a mounting point to stack additional plates on top of the main plate if you need more weight on the front of the car.
@SoloArtForm6 жыл бұрын
thats a teacher of yours ? awesome dude. we need more of those types.
@BassManBobBassCovers6 жыл бұрын
That came out siiiick!
@ashleylunan6 жыл бұрын
Love your build mate. Makes me want to build another h2b but turbo this time. Keep it coming dude
@tomatoknuckles6 жыл бұрын
Big thumbs up 👍 for your teacher doing that for you seems like such a cool dude👌
@xXPBNation396Xx6 жыл бұрын
The satisfaction is unreal 🤤
@treysparks25766 жыл бұрын
The weight plate looks sick! Also the mr2 would make a nasty time attack car ;)
@Coloradosweddingdj6 жыл бұрын
Clean, clean, clean!!!! Nice work!!
@bigz18666 жыл бұрын
Awesome teacher you have Kyle!
@joserotary96366 жыл бұрын
You go Kyle, get it done, lol.
@sieve56 жыл бұрын
What's up Kyle; love the subaru build!
@bayoubandits87106 жыл бұрын
I can't wait to see it shred
@Wabeeninc6 жыл бұрын
The Subaru clan disapproves of your actions
@steven-qk1sg6 жыл бұрын
i think that is the chillest teacher ever
@ricojohnson97146 жыл бұрын
why u opted to go 1/2" instead of a slightly thinner gauge? also how does it feel now with the plate installed in terms of traction?
@nathan-n14nismo126 жыл бұрын
Def gotta take Jeff for a run for cutting the plate. Top guy.
@alltheboost53636 жыл бұрын
More of the subi build. You guys need to build that motor and make it a monster.
@brandoncantrell33176 жыл бұрын
That fits perfect awesome job man thanks for the upload
@crutdawg6 жыл бұрын
I will never forget my wonder metals teacher in high school.RIP Bob Patterson. Kuddo's to great teachers to those of us who actually still make shit with our hands. (CNC, whatever the case, making something from nothing.) Good job Kyle! Hint: its teacher appreciation week btw***
@mrromo10006 жыл бұрын
That fitment is perfect bro!
@b00stedrust6 жыл бұрын
*WHATS GOING ON GUYS?* *Clicking intensifies*
@rw94956 жыл бұрын
Lol the jack screaming at 11:14
@GaryLordsWayMinistry6 жыл бұрын
Should of used a wire wheel for taking the paint off and check the torch bar to see if it is level and then parallel the weight plate onto the torch bar is square to the plate; and for safety in a crash the plate in front of the tires needed to be turned down so edge metal will not dig into the tires in a front end crash so you do not loose air pressure in a wreck and you can still have control a little better in the event of a crash.
@hondaboy75886 жыл бұрын
real nice job kyle!
@superpanapen49146 жыл бұрын
Kyle cover your turbo don want the same problem like the last time. Love the build keep going strong
@demonreamer126 жыл бұрын
I recommending adding some support to the front of that lip of the sheet metal to support it so it can’t flop up and down over uneven Surfaces or getting a harmonic vibration that can cause it to wiggle up and down and cause it to fail and rip at that bar you welded the plate to.
@Gunner63916 жыл бұрын
Congratulations on your graduation I know your builds are about to be off the hook now👍👍👍👍👍👍👍👍👍👍👍👍👍👍
@oshanechin-ep4de Жыл бұрын
2023 and I'm still watching
@K20rotrex6 жыл бұрын
Man like Jeff helping the Honda gang
@christopherchavira29486 жыл бұрын
Looks good you’re a smart dude love your videos. Keep them coming
@E30ShedSkid6 жыл бұрын
dont you wanna be able to remove it while leaving the traction bar? like add big tabs to bolt er up
@rw94956 жыл бұрын
Heavy metal at the beginning of the vlog, that's what I like to see!
@crstfr146 жыл бұрын
Teacher seems like a super cool guy. 👍
@louierocha96 жыл бұрын
Kyle is the true definition of built not bought
@jaimyvdriel6 жыл бұрын
Goes to study for exams, *New boostedboiz video*, watches instead of learning 😂
@kylealright2346 жыл бұрын
Shout out to all the Kyles out there 👌🏼
@RottenTomahoken6 жыл бұрын
I wish there was a place like this on the eastern shore of MD
@grantmitera29986 жыл бұрын
Just what a great guy that teacher is
@lowdnlow5spdgt6 жыл бұрын
What an awesome teacher.
@lordjoker3044486 жыл бұрын
These vids make my days worth living haha.
@capster156 жыл бұрын
Dude that came out perfect!!!
@SPTuning6 жыл бұрын
Looks great.
@carlab57696 жыл бұрын
Love the channel you gotta post more often bro 💪🏽💪🏽
@afaketwo6 жыл бұрын
Gotta love those 30 minute videos !
@melapelas84656 жыл бұрын
SP Tuning stay boosted PAPI come to Cali soon
@biggemage12346 жыл бұрын
Sorry for the total soonish question the tune you use when you start to grind on your traction bar what song is it Kyle been looking for some time now. Love all the work you show on your channel mate give me inspiration into my eventual project
@HarrodsGarage6 жыл бұрын
Nice one Kyle. Good work
@oatmeal91646 жыл бұрын
You need to take your teacher for a ride along, that would be gold for the channel
@petejones12321236 жыл бұрын
Jeff is the real MVP!!!! super clutch
@marquiseslater53376 жыл бұрын
I’m in love with tht idea was just thinking on how to put one on my Honda
@7eduardoep6 жыл бұрын
Damn that wieght plate looks really good. Good idea adding the support rods. Just in case you want to add anymore extra wieght.
@marcusappel77676 жыл бұрын
Loving the progress on all the cars and the channel!
@Klubyeezy6 жыл бұрын
Kyle deserves a milliom subs tbh
@Sloppyjalopy1236 жыл бұрын
Nice work, that turned out mint. Let us know if there's a noticeable difference, kinda curious. Congrats on the graduation.
@BikZom6 жыл бұрын
What a cool teacher
@yaz1156 жыл бұрын
Just realized you’re about to hit 400k holy shit!
@ryanem11956 жыл бұрын
Shoulda welded plates on the end of your chassis and tabs on your weight plate and tied it into the chassis but also removable with bolts. Just a thought!
@99mintaltezza26 жыл бұрын
Wow is that a college metal work room way different compared my schools 1
@Thiterest16 жыл бұрын
Community college, more specialised than a regular college.
@Zezims6 жыл бұрын
Your Man Mike Some community colleges will have even more special equipment depending on what industries are big in the region in order to help with jobs for grads.
@lou0410006 жыл бұрын
Thumb up for your teacher 👌🏼👍🏼
@TheRayneBlade6 жыл бұрын
Bro... All those grinder shavings right into your inter-cooler pipe...
@NoLyinEvry1sDyin4 жыл бұрын
You see the rag stuffed in there.. also not like it's running and sucking air. But hey I'm an idiot lol
@clearskyy6 жыл бұрын
that's sick dude, awesome
@cdk26786 жыл бұрын
Your teacher was pretty awesome for letting you cut your weight plate, let him take a ride in the hatch bro.🤘🤘🤘
@atxtrojans0026 жыл бұрын
Dope work man
@Sgt-Mahoney6 жыл бұрын
what a nice teacher! :)
@slingshot13046 жыл бұрын
The hatch looks meannnn without the front bumper!! lol
@playerinpink6 жыл бұрын
Give your welding teacher a ride in the hatch
@jamesmcivor3406 жыл бұрын
Congrats on passing your course ✋👌👍
@WeTryMotorsports6 жыл бұрын
Yo Kyle, that welder can fit an 11 lb spool of wire from Harbor Freight in the welder. So go ahead and do that
@ilikeboost47646 жыл бұрын
Tippo harbor freight wire sucks even worse than the welders.
@WeTryMotorsports6 жыл бұрын
Ilikeboost they're not actually that bad. Not amazing but they work pretty well. "Adaquate" as reviewed.
@ilikeboost47646 жыл бұрын
Tippo idk personally. I have been told that the best upgrade you can do to a hf welder is good wire.