Assembling The Engine For the 1000Hp Mr2 Build!

[@Apgreimelgoogle]

You guys gotta put the K series boat on a shirt written "Is your boat oKay?" LOL

[@aaron5222]

Why not the car like that video? Stupid idea

[@Apgreimelgoogle]

@mashi DO DUDE WTF LOL

[@TBasianeyes]

Dude, get new timing guide rails, chains and tensioner! Don't cheap out now on something so simple but essential.

[@justinharris3429]

I don't think they really understands that the cam chain sees 1000hp too but just not at the load the drive-train does. Cam chains are already a part of maintenance at those power levels definitely not smart to go used.

[@zackm6850]

I really hope he changes them. those are plastic and a steel chain rides against them. judging by there color they probably have some kind of grooves worn into them.

[@rogerfernandez3131]

TBasianeyes I’m no big power engine builder or anything but even I know to not reuse timing chains I really hope it’s just to get it going ASAP because I’m sure we’ll see a video later saying it’s already broke if not!!! lol not talking shit I love pfi and boostedboiz but come on man !!!

[@RG-go2oz]

It’s stupid man. Put good quality parts and shitty little things

[@effincasuals8877]

It's what they do...half ass

[@FourRingsAuto]

Been good to see Todd hanging around more again. Seems a very knowledgeable guy.

[@ImportRacer4Life]

Four Rings Auto where has he been?

[@FourRingsAuto]

@@ImportRacer4Life dunno. Think he left Working for PFI around the time they lost the old shop. Not sure on the timeline. But he just disappeared. Early boostedboiz videos he seemed to be Brents right hand man. Now Jamie is.

[@ImportRacer4Life]

Four Rings Auto yeah I did notice he seemed to vanish right around that time too. Glad to see he’s back though

[@Down.Range.]

The copper o ring placement definitely had my attention. Interesting.

[@EdwardAlcala]

I said the same thing, I’ve only seen it done once on a 12v cummings. But I guess it’s a common thing to do when you push a lot of boost into those diesels.

[@bradbarton744]

@@EdwardAlcala ive seen it done in my fathers old engine shop. the best technique was one wire in a figure 8. this is cit into the block and will not fail towards combustion chamber

[@codywit8491]

aaron olsen yeah same here thats a cheap quick way to throw a lil more boost on her

[@EdwardAlcala]

brad barton never seen the figure 8 way, gotta check that out for myself now

[@EdwardAlcala]

Cody G I barely found this out, the more you know!

[@KCMJ69]

I always file the ends on opposing angles. So they actually overlap, creating a much better seal. Guess im the only one that does that.Works for me though, so far havent blown a gasket even with over 100 psi. Lots of other carnage though LOL.

[@miatafan]

Casey Jobes good tip, what angle to the bore do you file the angle?

[@KCMJ69]

@@miatafan Just a 45. but it still works to close the gap. Better than butting them up. So far, its worked well.

[@Chargin2004GT]

Pedro is a man of many talents!

[@joshmross-bailey2855]

Pedro is the man helping everyone out all the time.

[@tnuc748]

''We're scavenging all kinds of things from that motor... That James blew up.'' He's never living that down ahaha! Good thing he's funny ''40 lbs of boost 40 degrees of timing'' 🤣👌

[@eddydevillelowks9499]

Good shit bro i remember that video his face was preiceless he was serious AF !!Savage james

[@isthismyfault]

That's the 1 to 1 tune. 1 deg of timing per 1 lb boost.

[@darkblaze176]

I think Pedro just became PFI's Body man Lol

[@LS__812]

@@MCl0VING damn bro. Obviously with your attitude you're not down with PFI

[@MrAlcmj]

Would be sick to set up the wash bay as a paint booth for Pedro

[@TakeNoShift]

@@LS__812 What did they say? I think they deleted their comment.

[@slyknowledged]

fuck yeah!!!!

[@Nickinatorz]

@@MrAlcmj Yeah agree with this man. He would be such a great asset to PFI

[@danteconradie]

from South Africa staying up till a BOOSTED BOIZ upload for the win.... almost 1 am

[@uzairsalie2984]

Same 🌎

[@sickel.7018]

Same greets From Germany 🇩🇪

[@scootabrothaa]

same for Poland

[@rynodeweerdt6729]

Likewise boet!

[@nicholas5623]

it's 8:15 here in Ontario Canada

[@EJ2BSeries]

Did u foregt some slilicone on cam bridge? Between two bolts (10mm socket).

[@mattcory619]

watching that first copper ring touch up perfectly against the other side was so satisfying to watch for some reason..

[@JB-mk4ry]

It's so awesome to see so many people in one shop doing their own things, yet helping each other out. Been a boosted boiz sub for a bit, found PFI a few months ago, and recently subbed to Shane. All awesome people. Keep up the good work!

[@ivtec845]

Please dont put a used junkyard oil chain on there lol

[@cgtigrad]

Pedro is such a humble badass!!

[@dougcohen3364]

Your content is the best. Woke up at 3am an there's not new content so I'm gonna watch this again :) thanks for making a 20 minute video instead of skimping an just going with 10 minutes every video like most other people

[@RoarS89]

Goofy is such a humble guy, engine bay looks clean af though! :D Good progress on the engine though, really looking forward for the sequential install video as well.

[@kylelove927]

Daaamn Shane! That engine bay is lookin good bro!!🔥🔥🔥

[@Ltbookum]

The different bolt sizes on the cams gears is a typical example of that fine Honda engineering and THE reason why i love the brand. Fine Japanese quality developed alongside engineers which (I can only assume) have actual field experience. Small details like that can be found all throughout there products and is a breath of fresh air amongst so many brands that don't. Even premium ones like BMW or VAG. Go from Honda straight to any Italian brand and you'll be having nightmares for days..

[@Little_Foxx]

It's good seeing Todd again! Haven't seen him much since the new shop

[@MRTuning704]

Now we can see the right k swaped mr2 on 1320

[@deerwithnoeyes1417]

M&R Tuning lol what the Aussie version not good enough for you ?

[@bernardmorris125]

Deer WithNoEyes just felt a lil upside down, you know?

[@MJTAUTOMOTIVE]

M&R Tuning, I don't think Kyle's mr2 will ever be as fast as the one from Australia. Would be good though.

[@williamhoffman1225]

Mark Thomas it’s statements and thought from people like you that doubt a person and that person then make dreams and passions burn wild and you shut your mouth!

[@hoffbald]

@@williamhoffman1225he should shut his mouth doubting kyle, but he damn well should egg him on to make the mr2 an absolute beast, we all should!

[@betavirus11]

thanks for the step by step shots. love watching you guys put shit together and take the time to film it.

[@brandonmolina3153]

Make the exhaust coming out between the taillights

[@MoonlightingBadger]

That'd be sweet ,but I'm guessing it'll be the classic boostedboiz hood exit

[@MoonlightingBadger]

That'd be sweet, but I'm guessing it'll be the classic boostedboiz hood exit

[@TakeNoShift]

@@MoonlightingBadger its so true that you had to say it twice

[@pilot554]

More like trunk exit cuz engine is in the back xd

[@TakeNoShift]

@@pilot554 i mean... its still the hood.

[@BlondiesGarage]

Great job guys! I’m a huge fan, and love watching your videos for ideas to improve my channel 😎

[@TAG247]

Blondie’s Garage nice lowkey plug

[@joserotary9636]

That boat is going to be sweet, and that mr2 is going to be sick.💯👍👍👍

[@therobb5738]

Ive been working on V8's and race cars since I was a kid, its been my life, but it is absolutely fascinating to watch you guys turn 4 bangers into several-hundred-HP screamers. Innovation and ingenuity, Boiz, y'all got it.

[@gabrieldelmoral551]

So, what do you think about engines with half the displacement and half the cylinders making more power than V8s?

[@jay_0890]

Hell yeah brother!! Never have I been so happy to be stuck in Dallas Texas traffic 😂😂

[@hotwrenchauto9223]

I was editing the video of my motor build and had to stop to watch this. I cannot wait to see what this car does!

[@EdwardAlcala]

I’ve seen the copper o ring done on diesels, cool stuff

[@cdun6969]

Real talk it’s good to see Tod around some again

[@nickfrechette19]

That jet boat is gunna riiiiip!

[@blaznmax8877]

The key way is so sick it's the way to go for that high up high rpm

[@Famouskidtito15]

Ayy motor is coming out amazing bro ... Keep at it 😎💯💯

[@JustAwesome2020]

Awesome video love seeing it come together 👌🏼

[@defaultxray6518]

Learned how to assemble my k20z1 just from watching these guys thanks boosted boiz!!!

[@richardaffonso]

The kid does a great job. Two thumbs up from Boston.

[@bryanglenn123]

I Love It! Come home from work to a new Boosted Boiz Video!! This day Can't Get Any Better... Unless PFI uploads one also??

[@robwalsh1167]

The timelapse at 4:33 was strangely satisfying to watch

[@jermainstarr4640]

Pedro is a certified boosted boi man of many talents big ups Pedro and all y'all from Bristol U.K

[@DaBundle]

Kyle gonna get it done to be pressure to the 8s sec MR2

[@Jasta315]

"We're scavenging all kinds of things from that motor that JAMES blew up!" Not salty at all LMAO 😂

[@terrancebarrett727]

Every guy at PFI is a True Gentleman Of Speed!

[@derekbader130]

I can't wait to hear that engine running! It's going to be nutz with the whole set up!

[@wheeliedad90]

The MR2 is going to be crazy! Can’t wait to see it in the car already!

[@caninparks4928]

Todd and Sean seem like such cool dudes. I'm envious of the wealth of knowledge that those two have

[@FourRingsAuto]

Brent has been lucky to employ both over time.

[@lexus_offroad_adventures]

So hyped for this video 😩😩

[@fishfoodbiscuit]

Man them guys at pfi are another level of skilled!

[@Ejiokpa16]

There is something beautiful about a new engine going together. 🔥

[@BlackTop_MafiaRP]

thank the car gods for notifications! finally another boostedboiz video!!

[@MILANOKIS]

Glad to see Todd in more of the vids!

[@dinxsy8069]

Great content as always, i'm a serious fanboy of S-Bodies yet appreciate you've kept the content to Honda platform just how the channel kicked off.

[@mikesweet5848]

Engine bay looking fire. Awesome to see Pedro helped out after talking shit about it haha.

[@jeffomalley100]

Lmao Brent is such a little big kid lol. He cracks me up every time lmbo. His laugh always brings joy to any room that he is in. Ive heard Cleetus say it before to that Brent alway brings joy to a room lol. He's such a good dude and always so nice to everyone. This is why he is the best tuner legit good luck ever finding any other tuners that are anywhere near as cool ad Brent is on top of being one of the best tuners out there.. there's a lot of tuners out there that are only out for themselves to make a quick buck and are not willing at all to help the customers most of them if you have a single drop of oil drip from your car it's a wrap they kick you off the dyno and still charge you the full price it's ridiculous. I can understand being upset if you spilled a bunch of something all over the place but come on.

[@nick_nt7574]

cannot wait for Tom's boat running!

[@mranderson6840]

Editing on point.

[@TonyWestDIY]

1st time I heard about u can't touch the studs with bared hands and 1st time I see the installation of the copper o rings. Good stuff Boiz annnnnd that jet boat tho 😍

[@SolivagantJourney]

Why not put all new timing component in a motor that you are spending so much time and money on?

[@FourRingsAuto]

Especially chain and tensioner

[@SolivagantJourney]

@@FourRingsAuto don't forget guides they're important too lol can be brittle and blow apart

[@swazi5]

Fawwwk it

[@ericgunderson5242]

Feeling a little nostalgia with the hux performance shirt bro, brings me back a few days

[@vernm6189]

I will always put new Chains in for the Cam and oil drive, if you want big power, it's the same for motorcycles or car engines. I didn't see you lightly use copper head gasket spray? On the Cam Towers I use Blue lock tight on the inner 10 cap bolts.

[@griplimit]

It's not recommended to use copper spray on headgaskets with that black coating already on them.

[@briantrip5022]

So one 1000hp isnt enough you needed two !! This is why I love this channel !!!!

[@britishpitbikerider1783]

Tom always looks high af bro 😂 #boosted420boiz 😎

[@dylanzrim1011]

And good guy Pedro, the bloke just giving up his time to fuck around with cars

[@MiGujack3]

Damn, I hope I can have that much fun as these guys do someday in my life.

[@brootpk]

*THIS IS THE BUILD IV’E BEEN WAITING FOR*

[@svrider2006s]

I’ve never messed with Honda motors but after watching you guys do it so many times I feel I could do it with my eyes closed now.

[@paultaylor9939]

Great content good bunch of guys that’s what it takes cheers from the uk

[@Steven_McCrae]

Brent’s laugh is infectious 🤣😂🤣👍🏼

[@Miggylocz]

Pedro coming through!!!! 🇲🇽🇲🇽🇲🇽🇲🇽🇲🇽

[@johnmichealsburnett8888]

Hell Yeah that's Awesome the MR2 is comin together an Tom's badass Rad boat is gonna be runnin tomorrow 👍👍 🤜🤛😎🔰🔰🔰💪

[@alexwilcox9559]

cant wait for you guys to hit 1 million subs :)

[@detroitredwing919]

That's sick ,I've never seen a copper O ring before LONG TIME ALL THE TIME"👍funny sh*t😂

[@johnr154]

Dopeness! It’s coming together

[@robinlabra8051]

Really enjoying these videos, keep up the good work Boostedboiz!

[@popanda3652]

Awww 9:20 the start of a fantastic addiction lol

[@popanda3652]

Ok i thought she was like a customers 12 yo daughter, but now i cant tell if shes 12 or like a really short 20 year old. Im starting to think shes not just a customers daughter. I will continue my investigation

[@alego9469]

Always making my night, boostboiz 😍

[@bradbarton744]

ive seen the oring a block done in my fathers old engine shop. the best technique was one wire in a figure 8. this is cit into the block and will not fail towards combustion chamber

[@BriannaDow21]

Best channel on the lubetube..... this and old cleeter and Brent about all I watch....

[@rickyvargas8661]

Good shit bro !! Glad to see the mr2 coming along 💯💯💯💪🏾💪🏾

[@charlesyoung6622]

How about cam to rocker clearance? Not familiar with the K-series that much. Are there shims, shimless buckets, adjustment screws to set the clearance?

[@StephenHarristnt]

Hi, great work. Can you possibly put a full build list for all the parts used and part #s etc.? Would be appreciated.

[@madmanwheelies6157]

im.following you since 600hp civic from years ago now you upgraded so much.loving the videoos much respect

[@blueballs5150]

I don’t know if you already did one but if not could you do a difference between the Honda engines video, pros and cons. And if we are trying to do our first build what should we be looking for? What is easiest to work on? What engine can you make the most freedom juice for the least amount of money? I’m trying to do my first build but other than getting the car first I don’t know where to start and which engine is preferable. Thanks

[@TrIcKyGiOmI]

Gonna be crazy 🔥

[@antoniomorgado5304]

hope to see that MR2 hitting the dyno! Thanks for this cool stuff from your portuguese subscriber!

[@amalfi460]

Did you put assembly lube on the camshaft lobes too or is it not needed on overhead cams? I have only done single cam small block V8’s so was wondering if it is different

[@kidturbo9331]

Can’t wait to see the mr2 back out

[@addicted2fuel]

The mr2 is gonna be nasty when its done. And you better hurry up cause i heard kyle at 1320 video say he wants to build one too but all that means is you will have more competition to kill. Cant wait to see you make the first hit on this car

[@lexus_offroad_adventures]

Would love to see this thing eventually lining up with Ruby.

[@benchasinghorizons9428]

Rubys getting smoked.

[@MoonlightingBadger]

That'd be good race right there once the mr2 is dialed in

[@benchasinghorizons9428]

An mr2 with 1000hp would smoke Leroy let alone ruby.......

[@darthbolloful]

@@benchasinghorizons9428 HAHAHAHAHA, you're forgetting something though Cleetus is a way better driver

[@benchasinghorizons9428]

@@darthbolloful agreed totally... good coment

[@4godadddygo]

Love this build probably my favorite in this shop

[@carlj5969]

Would the jet boat need a baffle in the oil pan like hondaru since the motor it sitting longways?

[@UltFrizz]

I take it the bores weren't torque plate honed to 100ft/lb with orings fitted?

[@Sauerbrew777]

So pumped for this! This is my dream build!

[@ConLLee]

i wonder how toyota and subaru feel about these builds lmao

[@M_POWER_TDS]

Awsome😀 Greatings from Poland😎🤗

[@chopper1168]

Can’t wait to see it make some power

[@Michigan_LT1]

Ahh yes watching this and rebuilding my h22a4. This is the life

[@kaidoabraxas3099]

Pedro is a god 🔥🔥

[@andytommykeddy3224]

When your sick af and Boosted Boiz uploads a banger! 👌🏼

[@nemesis394]

That boat though. Top notch

[@w900kw2]

Thanks pedro for helping goofy clean that thing up, my god man I was starting to have night mares