Making a feather from a silverplated butter knife

This is the process I use when making my butter knife feather pendants.
Welcome to Flatware CreationSS KZbin channel!!
My hope is that the videos that I make are able to help others, and inspire your imagination. I enjoy the process of creating and problem solving. I am self and KZbin trained in making silverware jewelry and sterling jewelery.
► Please check our affiliate links at the bottom of this post. We have put together a list of the tools that we use and similar items from Amazon. We do get a small commission from the sales. And that goes back into our projects and the shop.
If this is your first time watching one of our videos. Please hit the subscribe button and click the bell 🔔 so you can see when our newest videos come out. Also give us a big thumbs up if you liked the video. We appreciate all of the subscribers and comments and thank you for so much for watching.
✧Tools I Use (Amazon Affiliate Links)✧
If you find a Dead link please let me know.
► Professional 30000RPM Manicure Drill - amzn.to/3jUhdcI
► 30pcs Diamond Bur Bits - amzn.to/3bc0Y6T
► Frankford Arsenal Rotary Tumbler - amzn.to/2NxsGD6
► 5 Lb 1/8" Stainless Steel Tumbling Media Shot Jewelers Mix 3 Shapes - amzn.to/2ZpBWvq
► 1 Lb 1/8" Stainless Steel Tumbling Media Shot Jewelers Mix 3 Shapes - amzn.to/3qxsC4Y
► Harris Products Group 4 oz. Lead-Free Solder - amzn.to/37jX4Ym
​► Butane Torch with Fuel Gauge - amzn.to/3rXLMRv
► 1/16 Inch Cobalt Drill Bits 10pk - amzn.to/3djQdSA
► 3 in 1 Professional Jeweler's Saw Set Saw Set - amzn.to/3apX4s3
► Dual Headed Rubber and Nylon Faced Hammer 10 Inch Mallet - amzn.to/2N9FMX6
► Little Wrapper Looping Pliers, 5/7/10 MM - amzn.to/2OFaIip
► Wrapper-Looper Large Pliers - amzn.to/3diYczB
► Bundle: Cross Lock Fiber Grip Soldering Tweezers Set - amzn.to/3djWKwL
► 2 LB Dead Blow Hammer - amzn.to/3s205Vw
► 1 in. x 30 in. Belt Sander with 5 in. Sanding Disc - amzn.to/3bdPxeW
► 1" x 30" 80 Grit Sanding Belt 5pcs - amzn.to/3anMyS4
► Heavy Duty Arbor Press, 1 Ton Capacity - amzn.to/3qqR5bZ
► Solderite Soldering Board, Hard, 6 Inch by 6 Inch - amzn.to/3ucNfFR
► Aquiflux Self Pickling Flux 8 Oz - amzn.to/3qtFkS1
► 42pcs 1 Inch Radial Bristle Disc Kit - amzn.to/2ZkVi4S
► Compressed Charcoal Soldering Block - amzn.to/2NvOjUn
► Titanium Soldering Pick Set, Set of 3 - amzn.to/2OG1CC1
► 5" Heavy Duty Bench Vise Anvil - amzn.to/2Zkkwk0
► Central Machinery 8" Bench Grinder/Buffer - amzn.to/2ZpHd6h
►Diamond Cutting Wheels - amzn.to/2YJfKPZ
►
►
►
►
►
SOCIAL MEDIA CONNECTIONS
➔ / flatwarecreationss
➔ Facebook.com/FlatwareCreationSS
➔ / flatwarecreationss
➔ www.ticktok/@f...
AFFILIATE DISCLOSURE:
This video and description may contain affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. I won't put anything here that I haven't verified and/or personally used myself.

[@Keith-rk4td]

Nice work station! Everything can be done sitting down! 👍🤠👍

[@FlatwareCreationSS]

@@Keith-rk4td yeah my back can’t take standing some days. Actually a lot of days lol. So I made everything close and at a workable height.

[@Charles-oo8bq]

These if bent would make nice rings or bracelets. Great video

[@FlatwareCreationSS]

Yes they would. I have made bracelets with them. As a ring I would go smaller on the cuts so they don’t catch on everything. Thank you for watching and commenting. 😊

[@maribethzinkle2600]

I came for this unique idea. I stayed for the puns! 😂 "pun, pun pun, pun, PUN." Lol good stuff

[@FlatwareCreationSS]

😂😂😂😂

[@dnjones3685]

Cool . Thank you

[@FlatwareCreationSS]

Thank you for watching and your comment! 😃

[@rauldiaz9252]

that is real kool

[@FlatwareCreationSS]

They are a lot of fun to make!

[@tiffannystipe9626]

These are beautiful! Thank you for sharing with us!

[@FlatwareCreationSS]

Thanks so much 😊

[@annajones5081]

Thanks!

[@FlatwareCreationSS]

Thank you for watching and commenting I really appreciate it. 😊

[@FlatwareCreationSS]

I just noticed the $1 super thanks!! Thank you so much!! That my first one I am truly grateful Thank you 😊

[@paulconnell2385]

Really like your artist take on basic things (knives n forks etc.). Can you tell me why you tumble, and what's in tumbler?

[@FlatwareCreationSS]

The tumbling helps takeoff any little edges and at the same time it also cleans the piece. In my tumbler I use Dawn dish soap and 5 pounds of stainless steel shot. There are three different shapes of the shot. Often times called jewelers mix.

[@madswellejus]

Tx for sharing… please be more carefull when sharing ideas like this. Nice work!

[@FlatwareCreationSS]

Thank you I will.

[@hughtempleton8640]

Fantastic video. Thanks for sharing ❤

[@FlatwareCreationSS]

Thank you for watching. 😊

[@rauldiaz9252]

i also like the feather very intresting

[@FlatwareCreationSS]

They are a lot of fun to make. And the different versions that I’ve seen, there are so many possibilities.

[@JackieWildTG]

I have also made these for a long time but never thought of using the diamond wheel. Awesome work, thank you for a clear instruction video.

[@FlatwareCreationSS]

Jackie Wild Thank you for watching 😊

[@gregroth4696]

Sweet! I’ve been working on metal feathers. Love you ideas! Thanks man!

[@FlatwareCreationSS]

Thank you for watching! I’m glad that my videos are helping people create and try new things. Thanks for commenting. 😊

[@dianetapper2900]

Love the feathers! You made it look so easy, I definitely want to try that. Thanks for the video! I can’t wait to see the dragonfly you are going to make. I’m having fun looking through all,your videos, I see this one was made 3 years ago!

[@FlatwareCreationSS]

Thank you 😊 I’m researching the dragonfly’s now. For the 2500 subscriber giveaway.

[@pharmycat10]

Great video, thank you Jeremy and Seraphina!

[@FlatwareCreationSS]

Thank you 😊

[@highanddryful]

Fantazmagorick! Beautiful work:)

[@FlatwareCreationSS]

Thank you 😊 They we’re fun to make

[@melaniep9244]

Looks great. Thanks for sharing Jeremy and Seraphina!

[@FlatwareCreationSS]

Thank you 😊

[@jeansinclair1266]

Awesome!!!

[@FlatwareCreationSS]

They were fun to make.

[@ochssk]

I am loving the John 6:12

[@FlatwareCreationSS]

When I read it I knew that I had to put it in the shop. 👍😊

[@JeannineWhite-rl5tq]

Would love to see what embellishments you add when finished.

[@FlatwareCreationSS]

I normally will add some turquoise beads with a charm that hangs down from the jump ring.

[@SnapCracklePip]

Your really good bro....not a fan of flatwareables but fan of you

[@FlatwareCreationSS]

Scott Bowers thank you and thanks for watching.

[@usernamemykel]

Could you do the same with cutlery of stainless steel?

[@FlatwareCreationSS]

Yeah you can. I would use a hacksaw to cut the separations and a diamond wheel to score the lines.

[@stampwithcarol]

Great tutorial. Thanks

[@TheDivalady22]

Love your set up for your sander! Also love your tutorials thank you. Gonna make a feather tomorrow.

[@FlatwareCreationSS]

Thank you 😊

[@hepburn118]

Stunning work mate, I had to look up John 6:12 as well, very clever. It seems to fit nicely with your recycling ethos. What do you think about the idea of going through the exercise of turning the knife blade end into the feather look; and then trying to roll it up into a ring? Do you think it would be comfortable? Not too wide? I mean, in large part, it depends on the individual knife. Do you think the idea is sound though? I've seen it done with the handles of spoons, I just like the idea of trying it with a knofe blade feather and thought I would ask you.

[@FlatwareCreationSS]

Yeah i have made feather rings. Just make sure to round the cuts. Thank you for watching and commenting.

[@frans3474]

Put your water cup in a wool ‘cosy’ to keep it warmer longer. Or make a bespoke warmer

[@FlatwareCreationSS]

Thank you I’ll remember that.

[@strebis6]

Actually I’m surprised not to see any cuts on your hands very creative though.

[@FlatwareCreationSS]

Weathered Memories lol I’ve only cut my self with my jewelers saw so far.

[@LMM42424]

What was it you put on the drill before drilling the knife?

[@FlatwareCreationSS]

It was beeswax. I use it as a lubricant for the drill bit.

[@JaneThomas58]

Best flatware idea i've seen yet. what type of "blade" are you using to make the separations in the feather? Great work.

[@FlatwareCreationSS]

I’m using a 1 inch diamond cutting wheel

[@JaneThomas58]

Love these!

[@deborahbergen493]

O BTW the feather looks amazing. I wonder what else you do with them after being finished 😊

[@FlatwareCreationSS]

I’ve made bracelets, rings, barrettes. Your imagination is endless. 😊

[@stevenellis9801]

Can you please tell me what the solutions are and measurements. Thanks so much. Another great video.

[@FlatwareCreationSS]

Steven Ellis I just cut the handles off and that is whatever length the blade is and then I draw a centerline and then take my bandsaw make two or three cuts. And then I make a couple a deep grooves with the diamond bit and then I do the rest are soft cuts with the time in bit.

[@3bhhcollective585]

Awesome info & beautiful work. I’m not sure if I missed it but what kind of drill press are you using? I love the size of it

[@FlatwareCreationSS]

It’s an 8” central machinery drill press. It’s set at its slowest setting. Thank you for watching!

[@luciperaza4295]

Thanks @@FlatwareCreationSS

[@qwagmyre]

Great video, thank you for sharing your process. Was curious what the manufacture of the smaller dremel tool?

[@FlatwareCreationSS]

qwagmyre I got it off of eBay here is the item number that I could find for the kit that I got. 324023681532 And this is the hand piece that I use I like it a lot better. 302402262191 With the descriptions you can search for them and maybe find better prices.

[@qwagmyre]

Thank you for your help!

[@deborahbergen493]

I was watching intently, but I have a lot of marks all over my feather. I’m using a Foredom solely since my Dremel disappeared ! I’m just learning how to use my Flex Shaft. What’s the best way to clean it up ? I’m not sure which to use from my bits and such that I received with my Flex Shaft. Thanks for any help from you wonderful creative souls. 💜Deborah 🆑

[@FlatwareCreationSS]

To clean up all of the scratches and everything to make it smooth. You could use a wire wheel to takeoff the edges. I’m not certain what came with your flex shaft you could also use a Dremel drum sander really lightly.

[@sharonmillan6427]

What did you use to create lines for feathers..did not see a link at bottom..thanks

[@FlatwareCreationSS]

Thank you for your question. I used a diamond cutting wheel to make the lines. I will see if I can add a link in the description.

[@sharonmillan6427]

@@FlatwareCreationSS thanks..got one at Lowe's..and wow!!

[@FlatwareCreationSS]

@@sharonmillan6427 That's great!!

[@lulu6629]

great job , was just wondering what are the solutions you have in the glasses I didn't quite catch it . thank you

[@FlatwareCreationSS]

lynne pitchford I’m very sorry I missed your question. The yellow one has liver of sulfur and the clear one has baking soda as the neutralizer.

[@jacquelinedavisdavis8072]

I can’t find a blade for my bandsaw that cuts hard metal. I need a 62”.

[@FlatwareCreationSS]

Are you trying to cut stainless silverware? If you’re cutting silver plated you can use a Bi-metal cutting blade.

[@FlatwareCreationSS]

Here’s a search that I did quick on eBay. 14+ TPI (teeth per inch) in Bi metal has worked for me. I did just get a new blade that has more teeth for metal. I just barely push and let the blade do the do the cutting. Also I test the handles with a magnet. I’ve had handles that were magnetic and completely dull my blade.

[@vrw1964]

What is in your water solution?

[@FlatwareCreationSS]

It’s 2 drops of liver of sulfur and hot water. You should also have a solution of baking soda to rinse also.

[@user-hq6qr9rn2j]

Makeingaflowoatingheartfromsilverflatware

[@user-hq6qr9rn2j]

Makeingafloatingheartwithsilverflatware

[@FlatwareCreationSS]

Thank you 😊

[@Txnkid76]

Where do you get your band saw blades and what TPI?

[@FlatwareCreationSS]

I get them from eBay this is the one that I’m using now. FOXBC 1425mm 56-1/8" X 1/2" X .020" 24T Bi-Metal Band Saw Blades - 1PCS $16

[@Txnkid76]

@@FlatwareCreationSS Thank You! 🙏

[@Txnkid76]

I still cannot find a buffing wheel for my buffer. 😩

[@FlatwareCreationSS]

@@Txnkid76 I originally started with the ones that come in a two pack, a yellow, and a white one from Lowe’s. I would check reogrand.com for them also.

[@lisajohnson7637]

What about putting it in the tumbler?

[@FlatwareCreationSS]

Lisa Johnson I always rinse them off and then run through the tumbler.

[@freedomacreshomestead3723]

Those are nice! What do you make with the handles?

[@FlatwareCreationSS]

Sometimes pendants, bookmarks, chime parts, I’ve made them into fish for chimes. There’s a lot to do with them.

[@donnaguidry9246]

How can I get one of them with chain they are beautiful

[@donnaguidry9246]

Really Love your work would really like to buy one.

[@FlatwareCreationSS]

Thank you so much. 😊 Currently I’m away from my shop for a while. My wife is having chemo in NYC. But I can open my Etsy shop when I get home and I’m able to send you one. Or I can recommend someone for you.

[@donnaguidry9246]

@@FlatwareCreationSS I'm SOoooo sorry I didn't see your message I'm sorry about your wife my prayers are with Y'ALL GOD BLESS Y'ALL you make BEAUTIFUL STUFF..❤️😇

[@JaneThomas58]

Hi Jeremy, is there anything that would cut the grooves besides a band saw? My husband sold his when we relocated.

[@FlatwareCreationSS]

You can use a hacksaw or a jewelers saw. Thank you for watching 😊

[@robinyates6244]

You might look into making a jigsaw table :)

[@Aelawen]

What kind of motor were you using for your rotary tool when removing the burs from drilling and rounding the top of the piece?

[@FlatwareCreationSS]

Atom it’s called a thin nail drill on eBay. Here’s the current item number I can find. 324023681532 and I like this hand piece 352678859990 Thank you for watching. If you haven’t yet please subscribe 👍

[@Aelawen]

Nevermind, I read more through your comments and saw that the question has already been answered. This is a very unique solution. I would have never thought to look for something like this. I have a dremel 4000 with a foot pedal and a stand/drill press that work great for me bit were probably 3X the cost of yours. I also have a HyperTough rotary tool as a backup that cost less than $30 and o have to say that these things give dremel a rin for their money at less than a quarter of the cost and they come with more accessories. If anybody is looking for a great affordable rotary tool definitely check out HyperTough. I believe it is sold by Walmart but I got mine online..

[@FlatwareCreationSS]

I had the nail drill from doing my wife’s nails lol. It uses a 3/32 shank

[@maxthomas6974]

Where can you get liver sulker at? and how much do you use per glass of water?

[@FlatwareCreationSS]

I found it on Amazon. amzn.to/3mQgP1i The instructions come with it. I normally use a drop of it. Or I’ll paint it on and then dip and rinse in hot water.

[@sandyekstrand3879]

Why are you not holding it with clamp, pliers, something. You make me cringe thinking your fingers are going to be "carved" any second. But great idea and beautiful work

[@FlatwareCreationSS]

Thank you 😊 It looks close but I do have some distance between my fingers and the bit. The biggest thing I have to worry about is the heat. The harder you press to get the deeper groups the harder the piece gets. I’ve only ever slid off onto my finger once and it was just like a little burn not cutting or anything like that. Thank you for watching 😊

[@tamaraadams9317]

Thanks for sharing! May I ask, what medium do you use for your tumbler? I only have a vibratory type tumbler and haven’t tumbled anything except for some rough stones.

[@FlatwareCreationSS]

I use stainless steel shot there’s three different sizes there’s BBs around Saturn looking ones LOL and ones that are just cut off pieces

[@deborahbergen493]

Thanks!

[@deborahgleason7578]

Great tutorial! Thanks

[@FlatwareCreationSS]

Thank you 😊