Making a Knife from a bearing .

#knifemaking
Making a Knife from a bearing .
Making handmade knives. Video on how to make a knife from an old bearing, which can be found on scrap metal. Forging, locksmith, steel heat treatment, handle making, Kydex scabbard, tests. I don't answer about the price under the video, write to the mail: [e-mail]
Thanks for watching! Like it, don't forget to subscribe if you enjoy watching.
Facebook- hm.ru/Kr22hV
If you like my videos you can support me at:www.patreon.co...

[@thomaspaul311]

Four things: I love the tanto design. I'm wild about micarta as a grip material and I love how you made it seem primitive like chipped flint. And I am absolutely thrilled how you showed how you make a kydex sheath. Liked.

[@fz-makingknives3663]

Thank you 😊

[@tabiQun]

Ok, this is one insanely good looking blade! But the sharpnes.. yyikes it's scarry. Saving this video. :)

[@fz-makingknives3663]

👍🍻

[@TonersR6]

*sees him cutting the antler, rope, and wood block* "Damn, that's a wicked sharp knife" *grabs car hood* "okay now you're just showing off" lol

[@johnycash978]

Lmao I was thinking to say that too xd someone else watched the folding bowie on cold steel's chanel

[@beardaxe920]

This was like... watching porn Crom ! That was amazing If i had to choose one knife for my entire life... this will be the one Thank you for your efort sir.

[@fz-makingknives3663]

Best comment. Thank you

[@mattthescreamer177]

Man I need a forging press. I'm amazed at how fast it moves metal

[@MFO46]

Very nice! A practical knife, with a practical sheath! Well done!

[@fz-makingknives3663]

Thanks 👍😊

[@Scogny]

@FZ making knives please can you make a video of the system you use to flatten the blades? in the video position 4,25 thanks

[@reckless5306]

When we were children, we used to think that when we were grown-up we would no longer be vulnerable. But to grow up is to accept vulnerability... To be alive is to be vulnerable.

[@TheMultisportGeek]

Very cool. The sharpness is obvious and very well demonstrated. You should have shaved with it.

[@jeffmueller9059]

what's the HRC value on this knife

[@fz-makingknives3663]

60HRC

[@snappinback5252]

the music is like I’m back in middle school trying to find a beat on KZbin to freestyle to.😂 but amazing knifes

[@fz-makingknives3663]

Thanks 👍😊

[@MaxMax-xu7wb]

Золотые руки! Подписка!

[@fz-makingknives3663]

Спасибо

[@chancemcgyver8172]

I've always said , it takes balls to make a knife out of bearings....... ....

[@fz-makingknives3663]

Thanks 👍

[@dapeters19751]

I want that knife!!! That is one ridiculously sharp piece of steel. Great work man!

[@lovejcdc]

Straight up awesome work! I am definitely a new subscriber. Great video for sure.

[@fz-makingknives3663]

Thanks. We will try for you ...

[@AlCatrraz]

Where did you get those from? THE BERING SEA?

[@RedRose4711]

Absolutely amazing work. The Tanto is my favourite and this one is faultless.

[@marcello3718]

Bellissimo coltello. Complimenti. Li vendi?

[@Karroo74]

Офігенний ніж! Майстру окрема подяка!

[@fz-makingknives3663]

Дякую 👍

[@kucigal8993]

👍👍👍

[@fz-makingknives3663]

👍

[@fiqicrg]

Joss mantap

[@richr7604]

Great job on a quality looking knife, I like the simplicity or the design and the work on the sheath. Thanks for sharing.

[@tamekiamathis6490]

I wouldn't have believe it if I didn't see you do this. This is amazing work you do

[@fz-makingknives3663]

Thanks 😊😊👍

[@spyketyphoon1347]

No music!!!!!

[@ДенисНовоженин-д1т]

Сталь шх 15? Работа изумительная. Клинок получился очень красивый и дизайн в целом тоже .

[@алексейфедорофф-в3ь]

Не первый раз вижу: сначала закалка, затем выведение контуров заготовки, что немного нелогично. Почему не наоборот?

[@PegLeg5280]

Das ist echte Schmiedekunst , ich möchte auch so ein Messer ! Einfach großartig !!!

[@fz-makingknives3663]

www.etsy.com/listing/942338656/tanto-knifecustom-kniveshandmade

[@shadowman4168]

It’s amazing man how could I get one

[@fz-makingknives3663]

[e-mail]

[@michelebenini8125]

Really top 👏🏻👍🏻

[@Jesusisking12011]

That's the one I want next. Absolutely perfect.

[@molnaromatic]

when i see antlers it reminds me Jay Neilson and he's crazy testings :D

[@fz-makingknives3663]

👍☺️

[@Kurogane_666]

I love the style, I wish that I had your hydraulic press I need to try to make one

[@borismilman92]

Лихо! Очень лихо!👍🏻 Браво!!!

[@fz-makingknives3663]

Спасибо.

[@jcamisa50]

WOW. !!!!!BEAUTIFUL WORKMENSHIP !!!!!

[@fz-makingknives3663]

Thanks 👍

[@percyvandermerwe185]

I really liked this video and have subsequently subscribed. Lot for me to learn from your channel. Thank you for sharing. Friendly regards from SA🇿🇦

[@fz-makingknives3663]

Thank you 😊

[@jaimeherrera5892]

WOW, hermoso cuchillo, saludos de Chile

[@fz-makingknives3663]

👋👍

[@sjvche7675]

Grinding after heat treat , risky, yes?

[@fz-makingknives3663]

No

[@martinruss2423]

It's nice but I'd be more impressed if he didn't own every single professional tool you'd need to accomplish the act

[@ETKSauron]

I want this knife so badly! Excellent work!

[@alexandrhrereksson3343]

👍👍👍👍👍

[@DavidLee-tg6ht]

Hello, if use powdered high speed steel to make a knife, will it be more difficult?

[@fz-makingknives3663]

Hello. It will be more difficult))) ...

[@mohammedmohamed7991]

Hi, how can I communicate with you

[@fz-makingknives3663]

[e-mail]

[@loboicjusz]

Świetna robota!!! Łożyska to niedoceniony materiał... Well done!!! Bearings are an underrated material...

[@fz-makingknives3663]

Dziękuję Ci

[@antoniojimenez3265]

Why do you quench before grinding? Is not better work with the steel in a softer way? Thanks.

[@fz-makingknives3663]

Grinder belts are designed for robots with hardened steel

[@Petrovich-nord]

Файний ніж, файний канал.

[@fz-makingknives3663]

Дякую)

[@leolima75]

Good job but not very smart to hold the blade with bare hands while drilling ... some day the drill bit might jam and spin the blade cuting off some finger or the whrist.

[@neilcastro836]

Bro how can I contact you if I want you to make a knife for me? Please send me your info, I will truly appreciate it.

[@gianluigimarino8264]

Other fantastic work.

[@fz-makingknives3663]

Thanks 👍

[@Nuka067]

Çok kaliteli işçilik. İzlerken keyif aldım. Teşekkürler

[@JaKKaL1977]

Замечательная работа. Но последнее испытание я бы выполнял в перчатках, в целях безопасности.

[@fz-makingknives3663]

👍

[@sakiskarakasidis]

Charles Bukowski 15.45 😜😜

[@aumetalmental8403]

I'll have that...👀✌️😎

[@fz-makingknives3663]

👍🍻

[@TopHighlighted]

If I wanna buy it.. How it will cost me man.. I wanna one plzz

[@fz-makingknives3663]

write to mail [e-mail]

[@DanielRodriguez-qm4mh]

THAT ONE ONE BEAUTIFUL KNIFE. ID LIKE ONE BUT JUST A LITTLE BIT LONGER IN THE HANDLE & BLADE. WOULD I BE ABLE TO HAVE ONE MADE BY YOU? THANKS

[@cskom1]

Very nice knife , it’s possible to buy ??? . What’s name this material for etui ???

[@fz-makingknives3663]

Thanks for the comments. The knife is sold. Soon we will have our own shop where you can buy knives ...

[@cskom1]

@@fz-makingknives3663 ok super but i want knife like this ??? . can you say the name material for etui ???

[@boduke1776]

Very nice I like the fact that when I watch you you Forge your tips

[@JuanWick2010]

Wow!!! How much for that 🤣?! I’ll take 2😂😂

[@SaudiFalcon6927]

Wonderful, if you sell your product, please leave me your email.

[@fz-makingknives3663]

[e-mail]

[@TrebleForTheBass]

Is he cutting a picture of joe Biden up??? If so I'm in love

[@Ellarwoodstudio]

It was great, anyone knows the material for the case?! What was it?!

[@budgiegames9703]

Awesome knife, wicked workshop, excellent video.

[@fz-makingknives3663]

Thank you very much.

[@techgirl517]

I absolutely love your works ❤️

[@fz-makingknives3663]

Thanks 👍

[@geraldblackburn4883]

you are using a belt sander at 4:00 and you keep dipping it, in what water ?

[@fz-makingknives3663]

Water

[@skygrey7237]

Making something from nothing. That’s the best part.

[@amirsalah6363]

All words in all languages ​​fail to describe the beauty and splendor of your work, its accuracy, and the beauty of the product at the end, which is invaluable and rises to a masterpiece.. ❤️❤️❤️❤️👍👍👍👍

[@mrgomb8302]

This is amazing job i love it

[@zasd210]

СУПЕР!

[@ugurylmaz7666]

👏👏👏👏👏👏👏

[@fz-makingknives3663]

👍

[@blacklocksmith.918]

Шикарная работа!!!Б Р А В О !!!

[@fz-makingknives3663]

Спасибо

[@JoeyAtilano]

pretty sweet knife!

[@fz-makingknives3663]

Thanks 👍

[@AkseL-yk9ds]

Лайк жирный. Автор вопрос к вам. Где берете материал для ножен? Заранее благодарен.....на канал подписался.

[@fz-makingknives3663]

Покупаем через интернет

[@AkseL-yk9ds]

@@fz-makingknives3663 Спасибо...а как он называется? (материал)

[@fz-makingknives3663]

Кайдэкс

[@AkseL-yk9ds]

@@fz-makingknives3663 Большое спасибо..буду покупать и пробовать делать.

[@fz-makingknives3663]

👍

[@VoVanDOBROUMOVSKIY]

👍👍👍👍💪🤝

[@fz-makingknives3663]

☺️👍

[@fernandojimenez2922]

Muy buen trabajo te felicito desde España

[@fz-makingknives3663]

Thanks 👍

[@timyrshwarz]

обожаю ножи с юношества но не уверен что видел более красивый и четкий нож чем этот,респект!

[@fz-makingknives3663]

Спасибо 👍

[@Muansangamsx]

You are good.

[@fz-makingknives3663]

Thanks 😊

[@Mathieu_CHRC]

Pure beauty

[@fz-makingknives3663]

👍

[@jampatenzintsang6796]

How can I buy this knife I like it very much

[@АлексКорн-й7с]

Круто! Круто! Круто! Крутоооо!!! Красотища)) Надёжного друга-помощника сотворил)) Молодчина, сил многих Тебе и процветания). Так держать!!! Скажи, в чём протравливаеш клинки?

[@fz-makingknives3663]

Спасибо. В хлорноежелезо.

[@АлексКорн-й7с]

@@fz-makingknives3663 БлагоДарю😉🤝🔥

[@circusninja]

This knife. This exact design is what I want when I have the cash.

[@makar1818.]

👍👍👍

[@fz-makingknives3663]

👍

[@danielivanov3463]

Exellent

[@fz-makingknives3663]

Thanks

[@LastBastian]

Nice! Felt like I was watching an old Cold Steel "proof" video there at the end

[@rajuahamad9684]

What type of camicak yoused told me please?

[@igorvelezgomez6858]

Increibol

[@fz-makingknives3663]

Thanks 👍

[@Appellation]

A very nice knife, and good demonstration of it's quality at the end. What sharpener do you use at 14:14?

[@fz-makingknives3663]

Greetings. Homemade sharpener, diamond stones.

[@Appellation]

@@fz-makingknives3663 Awesome - thank you for replying. :)

[@kevinjaylaurel619]

what did you use in coloring that knife

[@ChettosHdz]

Me interesa el producto Soy de México

[@Japanese-k5y]

Добрый день сколько будет стоить изготовление данного ножа

[@fz-makingknives3663]

www.etsy.com/listing/942338656/tanto-knife

[@TrebleForTheBass]

Anybody know where FZ is from?

[@stavrosskourou4133]

Πραγματηκα φοβερη δουλειά μπραβω σου! 🇨🇾🇬🇷

[@TrebleForTheBass]

Tanto with serrations is my favorite. Perfect all-purpose knife so this went right along with what I love

[@arleneandrade1025]

Knife top 10..LAKE 👍👍👍👍👍👍👍👍👍

[@geraldblackburn4883]

Music at 5:00 ?

[@mohdfauzanmohidin6902]

It would be nice to have this knife

[@romanomirolo4401]

Hello, beautiful creation .... what material did you use for the scabbard?

[@austinXonXfire]

I NEEEEEEEED ITTTTT

[@fz-makingknives3663]

www.etsy.com/listing/942338656/tanto-knifecustom-kniveshandmade?ref=shop_home_active_7&frs=1&cns=1

[@ananew2755]

Very2 good 🖒🖒🖒🖒👍👍👍👍👍👍👍👌👌👌👌

[@fz-makingknives3663]

Thanks 👍

[@jlcreations9990]

A work of art!

[@fz-makingknives3663]

Thanks 😌

[@milansinko6253]

Dobro opremljeni shoping centar !

[@mohammedmohamed7991]

Hi, how can I communicate with you