Making a new helical pinion gear using the old broken pinion gear as a model

[@matthiasewert3587]

It is important to throw the finish product on the dirty ground :D

[@gneuhaus8047]

Pakistani quality product, only genuine with the sand marks.

[@АндрейШтерн-г8э]

Боже мой! Ну наконец то я увидел штангельциркуль! Значит не все ещё у них потерянно!

[@bondarenkodf]

Wow! You can rarely see such unbelievable precision nowadays!!!

[@logiccreations9176]

Thanks

[@АлександрДемидов-н9ь]

Центровка заготовки на фрезере молотком на глаз ? Да и люфт заготовки на оправке такой что ой вэй !!! Я не большой спец , но по первой специальности техник технолог обработки металлов резанием (ОР501) . Еще вопрос : они эту сыромятину так ставить будут ? Да и сама сталь , если верить виду стружки хорошо если 45-я а не СТ-3 ... Про азотирование и цементирование , закалку ТВЧ я вообще не говорю . А эта шестерня в коробку идет.

[@94XJ]

That drill needs some serious sharpening. It never ceases to amaze me how cobbled together these machines are. You can see blobs of weld holding every single lever and bolt together. It's no wonder when the tooling is so dull you gotta use a cheater bar to drill a fairly small hole.

[@glen7463]

The abuse to the drill bit and lathe tip 😭

[@MinhChien-ml8gp]

Giải nhiệt bằng nước

[@Patik-v1q]

I feel the pain 😞

[@estebangarcia6300]

SOIS UNOS MAESTROS UN SALUDO DESDE ESPAÑA ❤ 🦋 🇪🇦

[@isaquechaves7114]

O incrível é que não tem muita tecnologia,mas sobra muita excelência na confecção das peças.

[@andrealito7006]

Getting it done!

[@KatoriKisa]

Это ритаул такой, любую деталь бросать на пол? Хорошо еще фрезы на полочках, а могли бы просто из кучи на полу выбирать)

[@kotnapromke]

Ну горячая она. А у него руки нежные.)

[@wellingtonvasconcelos4371]

Parabéns! trabalho magnífico.

[@mauriciowilson8829]

La pieza nueva... quedó descentrada. Se aprecia claramente por las marcas que dejó la fresa sobre la zona lisa. En un sector del cilindo liso... no hay marcas del desvaste de la fresa y al girarla sí. -- (Deduzco que éste ''tornero-fresador'' no tiene incentivos en su trabajo ni expectativas de mejorar su remuneración)

[@rolandolaureano2461]

Excelente trabajo 👏

[@dave-j-k]

No matter what it is, it always ends up on the floor ;)

[@logiccreations9176]

Thanks for watching

[@g.j.m.9197]

Así son las máquinas de precision de estos paises, precision al ojo y ajuste a martillazos. Asi hacen piezas para vehiculos y demás.

[@wrathmachine7609]

Next time try making smaller holes and just bore them out with boring bars, you get way cleaner and straight holes everytime compared to the often offset holes

[@logiccreations9176]

Thanks for watching

[@BobSmith-mc7uq]

Runout? Yes..we have good runout, thank you. Heat treat? Yes we have lots of heat here in Packiland.

[@MinhChien-ml8gp]

người thợ giỏi

[@dusterowner9978]

You know a lot of times we never see if the finish product works or not !!! Just sayin

[@tek4]

Do you think they would waste the good metal on a fake? Just saying I bet every one works.

[@moderngoatfarming7396]

گڈ ورک جناب 👌

[@chiandoaferramenta6956]

Top

[@logiccreations9176]

Thanks for watching

[@vichetdragoncars3186]

Well done

[@logiccreations9176]

Thanks for watching

[@dcarlo770]

sistema de trabalho destes caras são assustadoramente precario😱😱😱

[@rogerandlyndabeall3840]

Why do you guys insist on working on the floor- my back hurts just watching.

[@kashifasif142]

Bhai ap kdr sey hain ap ka koe contact wegra mile skta h

[@godofplumbing]

As anyone who has banged in the shower knows - water is a terrible lubricant...

[@tek4]

Kerosene... its fuel and lube. I use it too.

[@russellhamer8690]

I'm always amazed at the lack of face guards n footwear..a proper job tho eh.

[@logiccreations9176]

Thanks for watching

[@enriquegonzalez2802]

Respect. Master.

[@ловлюзайцев]

а где подача масла на деталь?фрезам конец будет....итд...хотя там и так всему конец....

[@WowAmazingRestoration786]

good job

[@logiccreations9176]

Thanks for watching

[@h-S-368]

Kaun si City Se video banate hain

[@richardtemby4358]

Is the word “ Precision “ in their language? I think not. Just sayin!!!

[@tek4]

Thats the wrong attitude. Its called tolerances. Even rocketships have them.

[@richardtemby4358]

@@tek4 You obviously know fuck all about gear generating, let alone metallurgy with regard to hardening, stress relieving and tempering, so I’d suggest you keep your clearances to “ staying clear” of such topics. Just sayin!!!

[@EasternSurvival]

Do you see any computerised machines there? No? So may be quit complaining.

[@richardtemby4358]

@@EasternSurvival Sounds to me like a bit of virtue signalling. If you don’t understand the difference between stating facts and complaining then may I suggest you shut the fuck up ???

[@joshschneider9766]

Why don't you put up some vids of you manually machining a helical gear with nothing but a busted sample then?

[@Omnihil777]

I mean the results are far from fin and I'm sure far from exact, but still fascinating what results in what time they achieve. It works. Still, the working conditions are horrendous.

[@shahidkhantoba]

🌹♥️GREAT GOOD LIKE

[@norazmankhalid9128]

Ok

[@Fabe666r]

А где термообработка?

[@DirtForester]

That toolpost. Ugh

[@tek4]

I bet mine is worse

[@shahidkhantoba]

🌹

[@chotuusian4127]

Good work

[@logiccreations9176]

Thanks for watching

[@SkillsRevolution]

Hi bro

[@noeljshah1]

This part needs heat treatment too?

[@tonytran4857]

Pakistan don't need it

[@shohagmiha6755]

বাংলা কথা বলা যাবে

[@rogerwilliams2902]

Worst lathework Ive ever witnessed , awful .

[@HeavyMETALoO6PA6OTKA]

Там хоть кто-нибудь работает с головой? Как не посмотришь - кругом сплошное распиз...ство. ))

[@tek4]

The mess shows the money being made. Cleaning cost time and these people don't have much

[@detudoumpouco.22]

Torneiro um pouco maluco

[@Bob-uw1zn]

Isn't cheaper just to buy a new one?

[@enriquegonzalez2802]

No Sir. They are not in USA, Germany, UK, etc.

[@tek4]

No. This is the cheapest and fastest way. Post most likely doesn't come by but once a month.

[@telenor5001]

nope coverting currency, the rate is astonishing high. even this piece is still arounf 10k+ in local currency equals to 1/3rd of low level staff salary!

[@ท็อปกมลแย้มเพียร]

พระเจ้าจะอยู่ในใจของคุณ

[@frankgonzalez6744]

I can see why the other one broke......same mechanic!!

[@ท็อปกมลแย้มเพียร]

พระเจ้าจะอัลเลาะห์

[@tek4]

Wrong.

[@ท็อปกมลแย้มเพียร]

@@tek4 พระเจ้า

[@frankgonzalez6744]

Of course it's wrong, the whole peice wobbles when milling, see video again and keep an eye in the hole that was bored......it wobbles!!

[@Camelfacekamala]

Good god.....at least they’re not making rifles

[@damojfowler]

So many wrongs in this video.

[@achirabdirzak8010]

What's wrong

[@rogerandlyndabeall3840]

I am sorry. your work is shocking. If out first month apprentices were as filthy and poor as this they would be sacked.

[@tek4]

If they were as inexpensive as this, the first years would be king

[@joshschneider9766]

If you tried to pay them what these poor post colonial saps get they'd murder you. Look in the mirror and ask yourself how many generations of people who say sacked instead of fired hugely benefitted from the history that created these conditions rather than being guilty of smug colonial attitudes.

[@viorelpopescu4990]

Meseriasii sint foarte buni Banuesc ca patronul e o pacoste un zgirie brinza Ce e acolo nu se cheama nici in gluma locuri de munca Acolo e batalion disciplinar De asta nu are ursu coada si maimuta............. Unde este minima ordine si curatenie ? Unde este echipamentul de protectie?

[@tek4]

There is no money for that stuff. But you can send it if you want. I have to other shops.

[@viorelpopescu4990]

@@tek4 ............... prietene scuze daca am suparat prin comentariul meu pe cineva Dupa cum ai inteles, eu m-am referit doar la lipsa de organizare si menegement a intregului atelier Prin urmare ,, no money '' nu scuza lipsa de organizare a atelierului si nici mizeria care se vede in imagini Eu personal vad lucrurile total diferit fata de voi Faptul ca sinteti un magazin va obliga cu atit mai mult sa fie ingrijit, curatenie ordine echipament corenspunzator personalul echipat corespunzator ,, la 4 ace '' asa vad eu un magazin care ma atrage sa i-i trec pragul Ce e acolo e total dezgustator si alunga clientii nu i-i cheama de aceia e ,, no money '' Scuze dar ce se vede acolo nu merita sa i-i treci pragu In primul rind dovedeste o lipsa totala de respect fata de clienti si lucratori deopotriva Ptru a avea pretentie ,, la money '' trebuie sa prezinti ceva ce merita ,, money '' Cu parere de rau prezentarea lasa de dorit Prima impresie acolo se ia, daca e mizerie si dezorganizare creaza automat dezgust, repulsie si evident ,, no clienti ''

[@metalhunter3301]

you makes from shit peases, a really nice tool...this men is the best!

[@ganesankuppusamy8343]

When I asked the Almighty for peace, The Almighty showed me the Earthians living among religious menace, When I asked the Almighty for strength, The Almighty gave me many problems to face. When I asked the Almighty for happiness, The Almighty showed me the sufferings of poor. When I asked the Almighty which religion to follow, The Almighty showed me madness of religious people. When I asked the Almighty for wealth, The Almighty showed me Politicians and god-men. When I asked the Almighty for favour, The Almighty showed me corruptive Earthians. Finally, the Almighty gave me nothing or anything, But the Almighty showed me the right way to live without religious menace.