Making a Self Clamping Circular Saw Guide - Kendinden Yapışkanlı Kesim Kılavuzu

  Рет қаралды 1,107,231

Gökmen ALTUNTAŞ

Gökmen ALTUNTAŞ

Күн бұрын

Пікірлер: 436
@douggief1367
@douggief1367 3 жыл бұрын
Great work. Plus here's a couple of tips from a (now old and) very experienced wood worker. 1. Add a 90 degree cross piece underneath and at the beginning of your track board. Always quicker. 2. Leave your track board sticking out the other side of your fence for clamping (hand spring clamps are enough) as well as a 45 degree guide (cutting with saw at 45 degrees). 3. Trim the abrasive paper a little further, even micro granules will dull your blade. I've added these refinements after decades of using this kind of system. Also, an 8 foot version for large panel board can be helpful too. I've usually kept both in the workshop.
@uncleoky
@uncleoky 3 жыл бұрын
Thank you.
@seagorman
@seagorman 5 жыл бұрын
The simplest design I've seen yet works great, great idea to use a sandpaper backing to provide grip, well done.
@TheRealGrandadNo1
@TheRealGrandadNo1 3 жыл бұрын
For goodness sake, use a push stick when using that circular saw! It takes a small lapse of concentration or a moments slip to lose fingers/thumb (@27secs). I have been working in wood for well over sixty years and the most precious and valuable item in the workshop is yourself. Keep safe and thank you for posting.
@JustinShaedo
@JustinShaedo 3 жыл бұрын
@@Richardz I thought so to, but as per the original comment at 0:27 he runs his hand through the table saw when making the jig.
@Itnecap
@Itnecap 5 жыл бұрын
You left me speechless man! That is a super effective tool with no effort and you made it in less than 1:30 minute !! If you will come to Italy I'll offer you a coffee
@minfan3992
@minfan3992 5 жыл бұрын
i just built one. Never so easy for me to using a circular saw. Before I was scared to use it and afraid to cut my finger and never can made it straight cut. Now I did. Thank u so much for this design easy and simple. As female, I love it.
@kevinintheusa8984
@kevinintheusa8984 5 жыл бұрын
Great idea and I made mine today. Instead of sandpaper, I put small drops of clear silicone on the bottom and it works great. I also bring two spring clamps with me. I plan to keep it in my truck to use to break down plywood I buy at Lowes in the parking lot. Cool idea.
@ЕвгенийСамойленко-л9щ
@ЕвгенийСамойленко-л9щ 6 жыл бұрын
Очень понравился столик 4 в 1ом. Из всех просмотренных на ютуб самый простой и доступный в изготовлении.
@turtlehafunny
@turtlehafunny 4 жыл бұрын
The simplicity is genius 😂👍🏽
@doug2616
@doug2616 2 жыл бұрын
Best and simplest one I’ve seen so far. Thanks
@gordonyoud5975
@gordonyoud5975 5 жыл бұрын
It's amazing how stupidly simple ideas there are to make work easier. :-))
@walshMI
@walshMI 6 жыл бұрын
Brilliant! As Muadibe mentioned, "Simple is always the most practical". I'm going to make one this weekend. Thank you for sharing this idea!
@russman1958
@russman1958 3 жыл бұрын
That’s pretty darn clever! I think I would still use just a spring pinch clamp on the ends to keep it from moving though. To be safe.
@user-hv6ov3pm3f
@user-hv6ov3pm3f 5 жыл бұрын
I got a piece of wood flooring with the rubber backing on it, been saving for I don't know what. Will see if it works tomorrow. Nice idea, thanks for your time.
@Diegoguatamericonsul
@Diegoguatamericonsul 6 жыл бұрын
Me abriste la mente... ahora si me dan ganas de aprender a trabajar la madera luego de ver tus vídeos. Sos un genio
@gmtoomey
@gmtoomey 6 жыл бұрын
This guy is the Einstein of DIY.
@fredberger3155
@fredberger3155 2 жыл бұрын
That's a very interesting idea with the sandpaper; I'll have to try it. I have used a variation of this for 40 years. I use 1/4" fir plywood for the base (no need to go thicker), and a narrow strip of the same 1/4" ply for the guide. I never clamp the guide; because the good side of the wood is face down for a clean cut, I use two 3/4" nails to secure the guide, which when done I loosen, leaving the small nails in the guide for next time. Works very well.
@conradpaul6100
@conradpaul6100 Жыл бұрын
Hi,thanks for the comment.dabblign with making my own guide for my Makita circular saw as well.probpem with this is I'm concerned the 100grit sandpaper might scuff the material I am working on....what's your thoughts?
@Matt_Alaric
@Matt_Alaric Жыл бұрын
@@conradpaul6100 I thought that too. Maybe some higher grit automotive sandpaper might be better? 300+ grit?
@ashwinpatel7512
@ashwinpatel7512 6 жыл бұрын
I have seen lots of DIY saw guides but this is simplest and easiest of them.
@anamoraes6768
@anamoraes6768 6 жыл бұрын
I like you because you do simple tools to help us. Thanks a lot for share with us.🙏🙏🙏🙏🙏
@DrewJacobson61
@DrewJacobson61 5 жыл бұрын
Amazing simplicity in this!!! Love watching you work!!
@PeteBeardsley
@PeteBeardsley 6 жыл бұрын
That is quite simply genius! Simple but brilliant. Thanks for sharing the tip.
@SimonBarnsley
@SimonBarnsley 4 жыл бұрын
What a brilliant and simple idea. Thank you.
@rogerlehoux683
@rogerlehoux683 5 жыл бұрын
Ah, nothing like the ol K.I.S.S. principles without all the "bells and whistles" (and B.S.)! Nice job!
@Hippopotomonstrosesquipedaliop
@Hippopotomonstrosesquipedaliop 4 жыл бұрын
The sandpaper on the bottom is an awesome idea.
@marcelrey9533
@marcelrey9533 4 жыл бұрын
When I saw the window in the suggestion margin, I thought - oh no, not another one! I was WRONG! Simple and effective , great idea and uncomplicated video. Thanks for both. 👍🏼🤓
@jig1056
@jig1056 6 жыл бұрын
That is so simple yet so useful and something a person with my skill level can make.. Thanks for the great idea
@ГеоргийТрубников-е4ж
@ГеоргийТрубников-е4ж 6 жыл бұрын
Превосходно! Быстро! И конструктивно!
@jestork1
@jestork1 6 жыл бұрын
Call me paranoid, but I would still clamp it. Especially on more expensive wood. Love the idea and I can use it for other things. Thanks
@tinycuisine6544
@tinycuisine6544 Жыл бұрын
It's nice and inspiring how far you've come, seeing where you are today and where you started. Congratulations.
@bertkutoob
@bertkutoob 6 жыл бұрын
Another "now why didn't I think of that?" moment.👍👍👍👍👍
@kaiuwe0815
@kaiuwe0815 6 жыл бұрын
Just nice. I have Never thought about Sand Papier 👍👍👍👍😉
@Linchin555
@Linchin555 3 жыл бұрын
Haha, finally I find it fast and easy to make it, GREAT
@zinatsang8052
@zinatsang8052 4 жыл бұрын
Simple and easy are the best! Thank your for sharing.
@cheribrooks2108
@cheribrooks2108 2 жыл бұрын
Ty for making a video that doesn't over complicate. Exactly what I was looking for!
@cust888
@cust888 4 жыл бұрын
I would use the rubber mesh that you can buy at Home Depot and other places. It's more secure and will not cause any damage. And it comes in various colors.
@Mike588
@Mike588 4 жыл бұрын
Very good idea for a framer, quick, simple cheap and don't have to mess around with a chalk line.
@AerialLensVideo
@AerialLensVideo 6 жыл бұрын
The BEST ideas are usually the SIMPLE ones - WELL DONE! Subscribed. Sadece güzel açık bir huş ağacı kullanmakla kalmayacak, aynı zamanda kontrplağın su geçirmez bir yapıştırıcıya sahip olmasını sağlayacağım, çünkü bazı yerler çok nemli bir havadır.
@jarosawderybowski3506
@jarosawderybowski3506 5 жыл бұрын
Great idea !!! Outstanding work. Thank you for sharing.
@KennethNicholson1972
@KennethNicholson1972 6 жыл бұрын
Simple yet genius! Great idea buddy.
@LifestyleLogger
@LifestyleLogger Жыл бұрын
Fantastically simple 👌 thank you
@Toni-oy5gu
@Toni-oy5gu Жыл бұрын
Excellent jig! Keep it simple....... Thank you.
@manolinmxful
@manolinmxful 6 жыл бұрын
De los mejores de youtube. Simples, sencillos, pero muy funcionales sus creaciones.
@live2encourage
@live2encourage 3 жыл бұрын
Simple, practical. Good job and thanks for the idea.
@uncledope77
@uncledope77 6 жыл бұрын
This is really good for rough work. Not so much for finish or fine work. I really like this device. I'll make a couple of them with different grits.
@Davepool_TF-69
@Davepool_TF-69 3 жыл бұрын
Everyone stop making circular saw guide videos... this is the best of the best.
@soosaisteven3984
@soosaisteven3984 6 жыл бұрын
Anti-slip circular saw guide would have been more descriptive. Anyway it's a great idea.
@davidbrotherson933
@davidbrotherson933 Жыл бұрын
Absolutely brilliant!.. so easy. Glad I saw this before spending ages making one of the other, fancier designs :-))
@pauloaccorsijunioraccorsi4931
@pauloaccorsijunioraccorsi4931 4 жыл бұрын
The most simple. The best Idea!!!!!!
@raiderwarrior2725
@raiderwarrior2725 Жыл бұрын
Thank you. I’m going to make my own instead of buying.
@raycarter4030
@raycarter4030 Жыл бұрын
best and simplest hack for this problem i’ve seen.
@jeffwallace5261
@jeffwallace5261 3 жыл бұрын
Great idea!! I could use a guide at times, but the cost verses the use was tough. I will jump on your idea and make myself one. Thanks for the video.
@SamThomasss
@SamThomasss 9 ай бұрын
Very good idea... I will surely make one... Self clamping with Sandpaper
@WoodWorkerenginbircan
@WoodWorkerenginbircan 5 жыл бұрын
Ustam merhaba. Çok pratik ve kullanışlı bir klavuz olmuş. Ellerine sağlık.
5 жыл бұрын
Teşekkürler Engin Bey
@Hitngan
@Hitngan 3 жыл бұрын
Excellent. The big brands won't like it though.
@izoyt
@izoyt 3 жыл бұрын
they will probably copy it, as usual..
@1zanglang
@1zanglang 2 жыл бұрын
Since a Makita track guide costs as much as the circular saw, it is obvious they don't like it. I always wonder how the hell a strip of extruded aluminium with two silicone straps glued on it, would justify the price?
@koiruljuliant
@koiruljuliant 6 жыл бұрын
Great idea,nice
@humor62
@humor62 Жыл бұрын
I'm making that, thank you, right to the point!
@zajdlos4652
@zajdlos4652 3 жыл бұрын
In my country this would be called stupidly simple😁 great work mate your head is working unbelievably straight forward👍👍
@loopedmess
@loopedmess 5 жыл бұрын
Skateboard grip tape would be easier to get. Basically sand paper but more durable
@raulnicolasarmas7774
@raulnicolasarmas7774 6 жыл бұрын
Отлично, мои поздравления за работу и ваши учения, привет из Аргентины.
@davebuts1921
@davebuts1921 6 жыл бұрын
So simple but great, thanks going to build one.
@FUUNNIIEEE
@FUUNNIIEEE 3 жыл бұрын
I like this idea. It’s simple yet effective. And cheap.
@oAlize
@oAlize 6 жыл бұрын
Оригинально! А я заказал лезер, чтобы линию направления рисовал, а надо-то было всего лишь фанерку отпилить. Отличная идея сделать направляющую, автор молодец!
@Leo-66994
@Leo-66994 5 жыл бұрын
No entiendo el idioma pero el video, es muy claro, y la guía facil, de hacer. Muy práctico. Felicitaciones a su autor ! Saludos desde Colombia
@cackleberryfarm4598
@cackleberryfarm4598 Жыл бұрын
Best, and simplest one, I've seen yet!!
@mark261166
@mark261166 6 жыл бұрын
Simple is always the most practical.
@blinkie7
@blinkie7 Жыл бұрын
Thanks for not dragging this out. Good, short video.
@aaudain1
@aaudain1 6 жыл бұрын
Awesome tip, thanks for sharing
@richis9070
@richis9070 2 жыл бұрын
Very simple and efficient. We'll done my friend
@titodejesus6238
@titodejesus6238 4 жыл бұрын
Excellent and the simplest way to explain it!
@szakhem
@szakhem 3 жыл бұрын
Brilliant in its simplicity!
@jacindroid9534
@jacindroid9534 6 жыл бұрын
Other easy and practical project. Tomorrow I'll make mine. Thanks
@tecnovlogger
@tecnovlogger 6 жыл бұрын
Very good video, simple and direct
@ahmedlemzardi4119
@ahmedlemzardi4119 6 жыл бұрын
very simple good idea Allah bless u
@1955din
@1955din 6 жыл бұрын
Спасибо. Хорошая идея по использования наждачной бумаги.
@thetwogardens6048
@thetwogardens6048 3 жыл бұрын
I give this Idea a 8.5 / 10
@dawsie
@dawsie 6 жыл бұрын
Lol I will have to modify mine after seeing this, great idea 😹🤗
@thinkaboutthis572
@thinkaboutthis572 4 жыл бұрын
Simplicity at is finest.
@ianvicedomini2648
@ianvicedomini2648 5 жыл бұрын
Outstanding work. I'm lost for words
@GeorgeCooper_LoneWolf
@GeorgeCooper_LoneWolf 6 жыл бұрын
Love the idea of using sandpaper as a gripper.. Nice one
@아이세상-s8c
@아이세상-s8c 6 жыл бұрын
Wow! That's Great Idea.
@valeriacastellano5312
@valeriacastellano5312 6 жыл бұрын
I am going to make one of this for me. Great projet!!! Excelent idea.
@messygreasyhand5465
@messygreasyhand5465 6 жыл бұрын
True diy Great job man.
@mustafaserdarozturk862
@mustafaserdarozturk862 3 жыл бұрын
Simple and attractive, Thanks.
@johnvodopija
@johnvodopija 5 жыл бұрын
Super simple but a great design. Thank you for sharing 👍
@lamentonordestino
@lamentonordestino 5 жыл бұрын
Simple and useful. Best regards!
@deanoh6414
@deanoh6414 3 жыл бұрын
And for those of you that don't want to put scratches in the piece you retain... replace the sandpaper with neoprene strip from ebay.
@1zanglang
@1zanglang 2 жыл бұрын
Or rubber mat.
@ernestosreis
@ernestosreis 6 жыл бұрын
Excellent idea! Thanks!
@narindershergill9236
@narindershergill9236 4 жыл бұрын
Very clever man God bless you.
@jjampong
@jjampong 4 жыл бұрын
Amazingly simple and effective!
@fabiomerlin8820
@fabiomerlin8820 Ай бұрын
Simple and effective.
@fabiojkbali
@fabiojkbali 2 жыл бұрын
The best of the best !! (Less is more)
@yavuzgurer55
@yavuzgurer55 6 жыл бұрын
Elinize sağlık. Pratik ve güzel bir uygulama. Benim için çok yararlı oldu.
@vnle
@vnle 5 жыл бұрын
Thank you. Great idea !! You made my day.
@claudiozuniga9268
@claudiozuniga9268 6 жыл бұрын
Excelente, me gustó mucho... Es simple, fácil de hacer y sobre todo eficiente.
@Traitorman..Proverbs26.11
@Traitorman..Proverbs26.11 5 жыл бұрын
Don’t use sand paper. Use a bicycle inner tube cut in strips. Glue two or three strips lengthwise on the bottom of the guide.
@user-tt6nc6mo7k
@user-tt6nc6mo7k 5 жыл бұрын
Agreed the sandpaper would scratch the surface you are working on. Any sort of thin rubber material to line the base with would be better imo.
@mtmtodd
@mtmtodd 5 жыл бұрын
Man! Why didn't I think of that? Great job.
@sharit7970
@sharit7970 2 жыл бұрын
WHAAAAAT??? AWESOME!! Thanks for sharing!!
@youpaing8102
@youpaing8102 2 жыл бұрын
Thanks for upload, I have same circular saw and I'll do it for myself.
@hssn124815030
@hssn124815030 3 жыл бұрын
Amazing and very simple
@mikeharvey9811
@mikeharvey9811 5 жыл бұрын
Lovely, how simple I wish I had thought of this !
@paulwharton1850
@paulwharton1850 6 жыл бұрын
So the real secret is in the sandpaper........ingenious !
🟢 Homemade Track Saw - DIY Guide Rail for Circular Saw
12:09
GRINwood
Рет қаралды 8 МЛН
Каха и лужа  #непосредственнокаха
00:15
Car Bubble vs Lamborghini
00:33
Stokes Twins
Рет қаралды 36 МЛН
Wait for it 😂
00:19
ILYA BORZOV
Рет қаралды 11 МЛН
World’s strongest WOMAN vs regular GIRLS
00:56
A4
Рет қаралды 25 МЛН
circular saw guide track jig for precise cutting [woodworking]
9:35
J-woodworking목공일기
Рет қаралды 725 М.
Make Perfect Repeatable Cuts with any Type of Circular Saw.
14:05
DIY:Simple circular saw guide
8:14
JSK Projects
Рет қаралды 2,2 МЛН
Make This Circular Saw Track Saw Guide....With a Circular Saw!
8:52
Out of the Woodwork
Рет қаралды 713 М.
7 Amazing Jigs for Circular Saws / Hacks
31:54
JSK Projects
Рет қаралды 5 МЛН
A Circular Saw Sliding Guide Was Made By a Young Girl
13:38
Jung DIY
Рет қаралды 746 М.
Millions of people don't know about this homemade tool
10:10
ASIA WELDER
Рет қаралды 4,4 МЛН
DiY Circular Saw Guide out of Laminate II Homemade Track Saw
7:00
Crafty Dude Diy’s
Рет қаралды 1 МЛН
Tools are expensive. Do THIS instead
17:57
MWA Woodworks
Рет қаралды 292 М.
Каха и лужа  #непосредственнокаха
00:15