MAKING A SMALL CAM SOUND LIKE A MONSTER CAM. ITS ALL IN THE TUNE!

amzn.to/3OSrzHP
Turbo Smart Blow Off Valve
amzn.to/3R0GKBl
Cheap Valve Springs
amzn.to/3KobloB
Valve Spring Compressor
amzn.to/3DZeCIw
Brian Tooley Truck Norris Camshaft
amzn.to/3ut9MjE
Tools I work with.
Milwaukee 3/8 battery powered ratchet
amzn.to/3rcPdXh
Tekton 3/8 deep socket set
amzn.to/3ubIIWg
Disposable Gloves
amzn.to/3ocfMcW
Screw Driver Set
amzn.to/3ubZyoc
Camera 🎥
Sony ZV1
amzn.to/3s21kFF
Social Media
Instagram bo_builds_youtubechannel

[@clayyng]

Not gonna lie was not paying attention at first bc i was eating and i looked up and saw the black car in the background and ab spit my food out saying what the f&$k 😂😂😂

[@baby-sharkgto4902]

Lmao shit caught me way off guard too 😂😂😂

[@lucian8887]

How we just gonna gloss over the fact he got a is300 with 2 big ass twin turbos

[@Elcoboyz]

I just did a lm7 5.3 swap into my 72 el camino and im looking at purchasing hp tuners and start having some fun with it. Thanks for the informative videos man, keep it up!

[@mcfero1]

Do you have an Instagram. I’ve got the same setup. Just like to follow similar stuff. Check me out on Instagram @thelscamino

[@Nowayjose-z2r]

They do make flat tappet cams just for that chop sound. Large amount of overlap so good duration but low lift. The choppy comes from the values being open at the same time and as the video shows, low rpm. Because a roller can handle sharper ramping you can have a great as mentioned stage 3 and some 4 cams and balance a penny on it's side on the intake.

[@baby-sharkgto4902]

You missed the entire point of the video. He literally shows how people are simulating that sound with modern ECU tuning.

[@rickyj2013]

35 degrees at idle is wild. I have a 6.2 with a truck Norris and it seems to like about 14°

[@georgiaboy1579]

Good work Bo! The Vette was struggling. I need a procharger on my truck

[@DaSauce_59]

This is different for the newer GM engines. What parameters would you change for the LT engines?

[@8wireracing694]

Cool vid. 10' is cool can it go higher.

[@danecooper1914]

Great video! You’ve got that truck rollin!!

[@BoBuilds]

Thanks man! She runs pretty good for a big girl lol

[@danecooper1914]

For sure man!

[@treeroofgrass]

@1:57 I thought you said Chuck Norris cam 😂👍

[@goldsqaush3935]

Turbos do get rid of some of the exhaust noise until the higher rpm range

[@nashvilleoutlaw]

Idle spark control OFF for me for sure. I personally find that exaggerated monotone wap wap wap on a lot of video's obnoxious. Much prefer the more musical sound of potato potato potato with all the various higher and lower picks and ticks like in my old carb cars.

[@SuperAbsolute]

same this shit is just rice to me

[@JitThaRuler]

@@SuperAbsolute lmao a cam swap is ricer? Dumb asf 😂😂

[@baby-sharkgto4902]

@@JitThaRuler woosh. He isn’t saying a cam swap is rice…. He says adjusting the ecu to pretend you have a big cam is ricer… i can agree. It’s just that it is so common know that uneducated people think it’s just normal

[@tobydozier9030]

Are we not gonna talk about this twin turbo civic lol😳😳😳

[@Southrn_Maniacyago]

LS300

[@Slurm_Daddy92]

​@@Southrn_Maniacyagois300 lmfao 🤣

[@Southrn_Maniacyago]

@@Slurm_Daddy92 I don’t know a damn thing about jdm cars only domestic v8s

[@blindguysgarage]

Great vid sounds good

[@BoBuilds]

Thank you!

[@caleblevasseur2657]

So I have a truck Norris nsr cam 212/22x .498 lift and it’s supposed to work with factory stall. Now my question is, how would I go about tuning it to work with the factory stall and what areas should I play with? Granted I do want to have the true cam sound, just need to know what I need to do to make it work with my converter

[@hondaservicecenter]

What u gotta worry about is lift. So youll be alright

[@frankchapa4165]

.. nothing but noise, ....still ganna get gapped!! 🤣🤣

[@BoBuilds]

This guy lol

[@louisianaBoi225]

I wish you were in Dallas I need a tune

[@johnratliff8838]

Will this work on 1993 5.7 Chevy

[@permabulk1454]

Dog that twin turbo set up

[@melissamalone1530]

Bo I need to get my headers ordered and exhaust looking to buy the same as you bought but I wanted to ask if there was anything different u would have done if u did your setup again I was looking at buying a x pipe crossover but was up in the air about wether I should run a single 3 inch , dual 2.5 from x pipe back , or run dual 3 inch from x pipe back

[@colby431]

is it possible to do similar or the same with just underspeed control?

[@jacobvanhalteren7452]

pretty sure that's the right way to do it and gives a more natural sound. less computer timing adjustments

[@RealLife73]

Are you sacrificing power or economy when you tune for the chop?

[@jppoolcleaners]

Man sounds good! What pushrods are you running on this?

[@ericsych821]

Hi sir was wondering if I can chat with you sometime I have a 2013 suburban dod deleted and truck Norris cam and ls3 springs and I have tried 2 different tunners and it just hasn't worked out

[@isaacvillarreal4521]

Does it affect drive ability

[@jacobvanhalteren7452]

wouldn't you get more chop and a more natural sound by increasing the amount the rpm can fluctuate during idle? That way the computer isn't constantly throwing and pulling spark

[@christophermerz4787]

Lmao thay vetted sad faced when a extended cab walkin

[@karenashcraft8812]

its Rob. goos work bro. im doing the cam and heads on my truck this weekend. im gonna need a tune bro lmk

[@rossstephens6887]

Have my idle timing jumping from 7.5-28, nastyyy

[@JasonHarper-t3b]

Had any issues ?

[@29auto30]

Can you do this to a stock cam? Can you do this while the truck is running or do you have to reprogram it each time? THANKS!

[@jerry.stanford7916]

I was also wondering this

[@Jv505-tc]

Whats the tuning device you use bro?

[@melek6604]

❤️❤️🔥

[@BoBuilds]

🤙

[@john_mattz71]

Bro stayed with the vette💀

[@joshthieleman892]

I still need answers please get in contact with me I still can't find those options

[@redvette2466]

How do I lean out the fueling at idle so the chop is more crisp?

[@jacobvanhalteren7452]

fix your maf tables. Idle is open loop with O2s. also should be logging short term and long term idle fuel trims. Maf first then adjust idle until long and short term fuel trims a within 5%

[@redvette2466]

@jacob van halteren Thanks brother!

[@michaelsalinas8717]

Where in Texas you from needing my tuned

[@BoBuilds]

Houston

[@dean1627]

Where are you out off?I would pay you to tune my motor

[@BoBuilds]

Houston tx

[@BLUUCIFUR]

😁😁😁💯💯👍🏾👍🏾

[@popwall4297]

You can't hear what the trucks doing you keep talking