Making a Sublimation Tumbler with Sublifun Tumbler Press

[@ruthanndeline6931]

As a beginner, I appreciate you sharing how the process is done as I advance on, I have done a few mugs but not played with layers. thanks so much for explaining this so efficiently.

[@MakingwithMarilyn]

You are very welcome! Thank you so much for watching and taking the time to leave such a wonderful comment!

[@marlashaw595]

I love that tumbler holder idea!!!

[@MakingwithMarilyn]

Thank you!!!

[@TheBestUni]

I love that press

[@MakingwithMarilyn]

Thanks Uni!!!

[@roslynmcelveen549]

I love the tumbler. Great wrapping technique.

[@MakingwithMarilyn]

Thanks so much!!!

[@leannecrawford6077]

I love how it turned out

[@MakingwithMarilyn]

Thanks so much!!!

[@UNBIASEDLLC]

Very beautiful Queen. Nice technique

[@MakingwithMarilyn]

Thank you!!!

[@UNBIASEDLLC]

The tape method is awesome.

[@jackiewoolard4359]

great review and such a cute design

[@MakingwithMarilyn]

Thank you!

[@sugafoot138]

Love it Marilyn. I too like your wrapping technique.

[@MakingwithMarilyn]

Thank you Angelia!!!

[@TYJ419]

Looks GREAT!! Have to check out how you made the design next. Tracey

[@MakingwithMarilyn]

Thanks Tracey!!!

[@suezeeq12]

Hi and thank you for the tutorial - you mention that you changed the pressure but can you tell me what you changed it to please? Thank you!

[@MakingwithMarilyn]

There's not a particular setting. You just tighten or loosen the knobs until you like how tight it is. The machine doesn't need to be super tight. You can actually leave tape imprints on your tumbler if you over-tighten it.

[@UNBIASEDLLC]

I love the design

[@deborahrouse8059]

I'm just starting out I love your videos. Would you tell me the heat setting and time please for this machine?

[@MakingwithMarilyn]

Without rewatching the video, I'm not sure what I used in the video, but I can share my current thoughts. Time and temp will vary with the type of blank you are using (stainless steel, glass, etc.). But with SS tumblers, I tend to use 385. My timing has evolved over time. A pretty typical time for me is 50 seconds, then rotate it 180 degrees and then another 50 seconds. I used to have two more 20 second times in my pressing, but have found it not necessary. Some machines will tell you to use 356 degrees, but I typically bump it up.

[@CorettaDangerfield]

I love the design. The tumbler turned out great!

[@MakingwithMarilyn]

Thank you Coretta!

[@thecraftedmind1735]

Looks great!

[@MakingwithMarilyn]

Thanks so much!!!

[@bernettajames8810]

Looks great! What settings do you have your printer on to make your color pop???

[@MakingwithMarilyn]

I always use presentation matte paper and high quality. Thanks for watching!

[@MakingwithMarilyn]

I also use the extra dry time setting.

[@jessiegibson9023]

Good video thanks looks good 👍

[@MakingwithMarilyn]

Thank you!

[@TheShugluv7777]

Really worked out GREAT!🤩😍Love the look🥰

[@MakingwithMarilyn]

Thank you!!!

[@nanowomansk]

If you want the print tight just stick it in the cold press & add the tape. Just position it where the paper seams are in the opening in the press.

[@MakingwithMarilyn]

I'll have to try that! Thank you!

[@jerridyke68]

Smart idea! Thank you for sharing. I too will try this.

[@ritaurbina8281]

When you have an overflap. How do you know which side to fold over or does it matter?

[@MakingwithMarilyn]

It doesn't really matter, as long as the white from the plain paper is trimmed off the design. Thanks so much for watching!!!

[@samanthalopez7307]

Do you have a video of your epson 15000 printing settings? I have the same heat press and printer but my tumblers comes out faded

[@MakingwithMarilyn]

I do not, but I use presentation paper matte with high quality printing. I don't do anything special other than that. When you press your sublimation images on other things, are the colors vibrant? Maybe it is your time/pressure/temperature?

[@gloriamanville8770]

Great tutorial. May I ask where you purchase the yellow scraper from. Thank you❤️

[@MakingwithMarilyn]

It came as a free bonus in a bundle pack of htv from HTV Ront.

[@TheUnleashedCrafter]

This is soo Cute it came out great and vibran I love it I have been using my cricut mug press to do my tumblers but I really like this press time to save some coins😍😍😍

[@MakingwithMarilyn]

Thank you Unleashed Crafter!

[@Jana-TheCraftyGambler]

Have you tried the pinch perfect! It’s a tool that help you really get a good, tight wrap on your tumbler. I have one but haven’t used it yet. All the the reviews I’ve seen on it are really good.

[@MakingwithMarilyn]

I haven't tried it, but I did hear of it on a KZbin channel I watch. I should read the reviews to see if think I would like to try it. If you try it, I would love to hear your thoughts! Thanks for watching!

[@jerridyke68]

Thank you for this video, so glad I found you @MakingwithMarilyn. Do you have an Amazon store, or can you tell me where you got the extra thick heat tape please?

[@MakingwithMarilyn]

Here is the tape that I use in the 20 mm width. Thanks for watching! amzn.to/3GtNILE

[@Bplays2u]

Pretty

[@MakingwithMarilyn]

Thank you! I appreciate it!

[@catherinemarin-rios4536]

I love what you created to rest your tumblers. Would you be able to share the sizes of th PVC pipes? Love your videos!

[@MakingwithMarilyn]

Thank you! Here is a link to the video where I made the tumbler holder. I bought one of the really skinny pool noodles so used fairly small pvc pipe. You could take a small cut from your pool noodle to Home Depot or wherever you buy your pvc pipe to make sure you get what works for your pool noodle. kzbin.info/www/bejne/g3nYmJR3n6uNf9k

[@sandralewis9036]

Love it

[@MakingwithMarilyn]

Thanks Sandra!

[@lolathepoet900]

How do I adjust my heat press for a 20oz tumbler? It won’t close all the way

[@MakingwithMarilyn]

If it doesn't close all the way when you tighten the pressure knobs, then you just have to rotate your tumbler and press again. I have several videos on showing this. Play around with your time and temp though to see what works best with your tumblers.

[@TheBestUni]

❤let’s goooo

[@debiz1023]

How do you find the coupon on amazon?

[@MakingwithMarilyn]

If a coupon is available there will be a little box by the price to check. I think the press was on sale last time I looked though without needing a coupon.

[@printedmemoriesbyclaudette5092]

Hi, Making with Marilyn, it looks good

[@MakingwithMarilyn]

Thank you Claudette!!!

[@CreationsbyKAyishaLLC]

Love It

[@MakingwithMarilyn]

Thank you Kenya!

[@kingdomtouchesbyajayrichrn6077]

Good stuff! 14:28

[@MakingwithMarilyn]

Thank you!!!

[@janethg9322]

Hi can you help me what's the best tumbler press from Amazon

[@MakingwithMarilyn]

I have tried multiple. The 3 that I have that I like the best are (these are all very much the same) listed below. I have tried 2 others that I did not think worked as nicely or functioned as easily. The main thing is to make sure they fit the size or sizes of tumblers you plan to make. Mocaru amzn.to/3KsZTLb Sublifun amzn.to/3ILHMz3 Craft Express amzn.to/3lUpiDw

[@janethg9322]

Thank you so much 💓

[@preciouspeaces]

TFS👍🏽

[@MakingwithMarilyn]

Thanks Nicole!

[@UNBIASEDLLC]

Hey Queen

[@MakingwithMarilyn]

Hey Unbiased!!!