Making a TRUNK ORGANIZER for tool storage | Woodworking

In this video I'm building a plywood TRUNK ORGANIZER to store my car tools. The car is a Dacia (Renault) Duster II (2021) 2WD (2 wheel drive) which unlike the 4WD has the spare tire underneath the car...
Dimensions are included in the video and can be used as a guide.
You can adapt the project to your own car and liking.
(!) Use measurements from your car (!)
Subtitles are available (click the "CC" button)
Music : "To the Sun and Back - TrackTribe"
Pop sound effect - Vilkas Sound, / @vilkas-sound
(woodwork, woodworking)
Car boot liner : POLGUM Car boot liner 130x122 - (1007C, EAN 5907584320980)

[@deserttrailscout]

This was awesome! Exactly what I was looking to do for my Jeep Compass Trailhawk for all my recovery gear! Thank you!

[@hoppskippity]

It amazes me how some people are so very skilled in their trade, and have mastered the video production equally. Fantastic work on all fronts! Inspiring.

[@stevenshobbywoodshop4628]

Thank you for the kind words, means a lot 🙏, glad you like the video. cheers

[@PackAddict]

Excellent video and build! As a builder, my favorite line was. "I managed to glue the sheet into position." but it also sounded like, "glue the shit into position." That is what I would have been saying at this point in the build! Again, excellent work, keep it up!

[@stevenshobbywoodshop4628]

Haha thanks, yes my English sounds like "sheet" too 😆, cheers

[@Gamer_Marcy_God]

ThNks for this. I made this for my car based off your video.

[@RoadRunnerMeep]

Great design I conteplated something like this, because it gives you the entire boot space but also allows you to carry your entire workshop when you're one of those people who likes their tools

[@deltafoxtrot2]

Well done, great attention to detail👍

[@stevenshobbywoodshop4628]

Thanks for the kind comment! Glad you like it

[@joedimaggio3146]

bloody genius mate

[@juliesievert7073]

You had me at "Manual nail gun"! Great build, super explanations, very clear video. You made a new fan/subscriber.

[@stevenshobbywoodshop4628]

Thanks for the comment Julie 👍 glad you like the video, cheers

[@WhataTry]

Great job will illustrated and well videotaped, thank you.🇮🇪☘️

[@fokanerantsieng4642]

Brilliant idea and thanks for sharing 👌🏽

[@jessemanmarcharris]

You've done a great build! So many ideas for my planned project.

[@BeeeHonest]

Brilliant!

[@powertrihy4874]

Fantastic great idea, I've a large tool selection as a chippy but only a small car at the moment this is a great idea thank you well done!

[@austinalexander238]

Wow, man. So cool!

[@ScoopyJoe]

This is amazing, I've been desperately trying to figure out how to build EXACTLY this for my CRV. I doubt I could ever get a finished product that looks as perfect as yours though.

[@stevenshobbywoodshop4628]

Thanks Joe, I'm sure you'll figure it out for your CRV, goodluck and have fun 👍

[@C18H19NaO5S]

Absolutely beautiful work!

[@stevenshobbywoodshop4628]

Thanks for the kind words 👍

[@viktorchao4191]

amazing work

[@antonesterhuizen2573]

Love your videos... Just a tip... if you take off the carpet you will add a 0.5 to 0.7 decibells... if you cut a small 45° angle lip in all the corners you will also add on the db's... and if you really want a few more, you can seal it with rezon... Keep on keeping on.. much love brother

[@IanGMcM]

Lovely job mate. Looks really neat and tidy. 👍

[@stevenshobbywoodshop4628]

Thanks mate 👍 glad you like the project, cheers

[@arslan512]

amazing.

[@danielseron6700]

Grandísimo trabajo, si señor 👏👌

[@stevenshobbywoodshop4628]

Muchas gracias! 👍

[@samuelgreenfield1754]

Amazing

[@robinjones5912]

Fabulous

[@TeeJayTheRippa]

Great job dude! Looks covert clean and tighty

[@stevenshobbywoodshop4628]

Thanks for the comment! Cheers 👍

[@handyjim]

brilliant

[@Reisof]

Çok güzel olmuş tebrikler

[@marke.1021]

Initially wasn't expecting much- After viewing is a very nice job. Good functionality and not hard to remove if for some reason need to. It has been a year, any modifications you might have wanted to change by chance? I really do like it as is.

[@stevenshobbywoodshop4628]

Hello Mark, I still have it installed in the car without any issues. The cable-ties aren't really needed, so that's something I've dropped. Last week we transported a washing machine (packaged) and I forgot to take it out, luckily the machine fitted barely but that might be the downside; You can get in a situation where a load might have fitted without the storage-bay. But I'm still very happy I made it, for me it works great. Thanks and have a nice day 👍

[@btd2516]

Best one I've seen so far!

[@stevenshobbywoodshop4628]

Thanks! 👍

[@jamescabrera3655]

Very Nice! Looking to do something similar in my car as well. Thank you for the detailed video!

[@stevenshobbywoodshop4628]

Thanks for the comment, have fun with your project 👍

[@brianhacker7346]

Thanks for the awesome video Steven. The solution is well presented and complete. I am working on a similar concept for my Jeep and this concept will fit my needs well.

[@stevenshobbywoodshop4628]

Thanks for the comment Brian, have fun with the Jeep project 👍

[@user-pu3hh3ct2r]

اشكرك من كل قلبي طيب علي تصلح لي سيدان

[@vidtdao]

Buen trabajo 👍

[@stevenshobbywoodshop4628]

gracias! 👍

[@mariusb9307]

super

[@jos_t_band3912]

Really 👍

[@user-kb1kn5gv3w]

The tools in the drawers must be secured, otherwise they will rattle and dangle

[@-joe90]

Excelent¡¡¡¡

[@hubertgaworek6487]

I love it and I have to do something simillar for my Duster

[@stevenshobbywoodshop4628]

Thanks for the comment and have fun building your project!

[@severussmith6326]

i wish if i could do that too , nevertheless ,i am gona have it custom made by showing the video to a professional wood worker , thanks buddy .

[@stevenshobbywoodshop4628]

Thanks for the comment, hope they can help you out with the project 👍 cheers

[@raafiqabrahams5170]

Great job, it look like you bought the vehicle with box already fitted

[@stevenshobbywoodshop4628]

Thanks, glad you like it👍

[@Fkidd702]

I would of got a black piano hinge or just painted it But hey that was a great video ! I don’t even own a car like that I own a truck and just recently made pull out drawers

[@stevenshobbywoodshop4628]

Yes a black one would have been nicer, I only found those brass hinges. Wish I had a truck too but our government declared war on them with extremely high taxes, won't ever be able to afford one now. Great to read you made a pull out project for yours. Cheers

[@deadeyessmiling]

This is a phenomenal build! Have you had any issues with the liner getting snagged along the hinge seams?

[@stevenshobbywoodshop4628]

Thanks, the liner doesn't get snagged along the hinge seam, but I left a gap there (about 4-5mm) so it can freely rotate/move. Cheers

[@talhamiah4319]

Where can I get the boot liner

[@stevenshobbywoodshop4628]

I got it from a site called 'Autodoc' (europe) cheers

[@mitixmitix4841]

Ciao, posso comprartene uno identico?

[@stevenshobbywoodshop4628]

(Tradotto) Ciao, sono solo un ragazzo per hobby, quindi non posso aiutarti in questo. Grazie per la comprensione.

[@TeeJayTheRippa]

Tidy*

[@daviddavidsonn3578]

aie mes oreilles 🤣🤣🤣

[@stevenshobbywoodshop4628]

Tu peux couper le son et activer les sous-titres si tu veux protéger vos oreilles 😆