Custom 4Runner Drawer and Bed System

[@norsefalconer]

Fellow wood worker here. I really appreciate the craftsmanship. Wishing you as much success as you can handle.

[@ibaD3aTh]

I've been checking out lots of drawers systems for DIY purposes. After a year of watching videos, I can easily tell that you're designs are the best. Thank you for sharing.

[@thethoughtchapter]

My head is bursting with ideas after watching this 💡 the removable dividers are such a good idea!

[@aguyhisdog9485]

Hey! That 4Runner looks familiar! Thank you again for the awesome build, Brian! I'm really happy with the way it turned out and I have received a ton of compliments on it. Awesome work as always!

[@MaxSualkin]

Is the stove platform sturdy enough with two pots full of things on it?

[@aguyhisdog9485]

@@MaxSualkin Yes but I'll probably end up using it more as a food prep surface and use a separate table for the stove due to the propane canister needing a place to sit.

[@yankswap]

What did a build like that cost?

[@mauifive1311]

Nice work. How much was this build?

[@jimbojames2181]

gerard five please tell price !

[@bamargera0123]

That drawer slide support for the piano hinged cooking surface is very smart! I went over that exact problem in my brain hundreds of times when building my setup and I wish I came up with that idea. Great job!

[@edwardvillate2112]

You're ALWAYS a ⭐ STAR when it comes to BUILDING SOMETHING'S !!! THANKS 👍 👌 !!!

[@homeandmorefurniture2394]

Why would anyone give thumbs down.. that’s freaking awesome 👏

[@johndigiovanni]

That stove flip up is awesome. Great idea for that thin pullout support.

[@SeizeTheAdventureCo]

I keep coming back to this build because it’s perfect! Rad design man

[@matthewhill4295]

One of the best work space - making ideas ive seen. Love watching these videos

[@carelscompanys1]

I like your work really nice. I build stuff on the weekend here San Gabriel Valley for fun. One thing my wife grandpa who was a cabinet make showed me that really finishes of the cabinets use the router to bullnose/round over all the sharp edges/corners that little touch will really impresses the customers when they bump against them, they will thank you later.

[@fightmilk8613]

Bryan just installed his standard system in my gen 4 and I love it. Thanks dude!!!

[@ThisTall]

Man I’ve been pondering if I can replace my 1/2 ton short box with a gen4 4Runner to fit my cabinet installer tool kit. This is encouraging.

[@JoshuaSHogg]

Builds keep getting better and better

[@GottaHaveIt]

I started making this same type of build for my 4Runner. When I started work on it, I considered the ramifications if someone rear-ended me/my family in it. With so many distracted drivers today that’s a very real possibility. Even a moderate rear-ending could catapult that rigid structure into the backs of the front seat occupants. This may cause death or paralyzing. I couldn’t live with that risk myself. So, I modified my design to be collapsible in the event of a rear-ending accident by 2-3 feet. I’m surprised so many builds do not plan around this potential. Has no one else designed a collapsible version? Maybe I should make a video on my design that I’m building now.

[@CORNDODGER]

LOL PUT A FUCKING STEEL BUMPER ON IT

[@debbiedebbie9473]

I LOVE the pop up table cover for the drawers. And removable dividers ! 🎯 Brilliant.

[@egsmachine]

my favorite so far. good stuff

[@mariocooke5463]

very good. you are getting better and better. most practical design.

[@RoccoSilingo]

I REALLY REALLY need this in my life! Please don't forget about me when you are back to doing custom installs again! please!

[@fernandoanguiano3181]

Hey Brian how are you this is Fernando from Los Angeles California I just like to say I love you show you give me a Lotta good ideas I am building my my truck a lot of spaces for my tools I do construction and believe me I relate to this so simple and nice on all the the the furniture’s just congratulations man keep doing that thank you

[@bellanova435]

I definitely want to do this when I get my 4runner!!!

[@denahom]

Nice and modular, great use of space!

[@jimflanagan6029]

You did a great job, nice setup. The 4 Runner is next on my list , I’ll hit you up lol .

[@PetrS]

So minimalist setup and two great ideas I never saw before! 👍

[@johnhaberstro8165]

Idea overload... true craftsman! Cheers mate!!

[@mohammadajmalahmadi1764]

Top 👍👍👍👍👍the 3 and the 4 better. I appreciate the bigger Space underneath particularly by the back passenger door

[@jeffdeshong]

That’s a really good idea for the stove 👍🏻 good work

[@ceratonia04]

the table for the stove is a great ideea! well done

[@loverainodie]

Love the table top/extra platform. Details and movable slats on point

[@robgindc1]

More modular magic you've performed. Nice! Stay safe & well.

[@deanflet973]

Thanks for this Awesome video content. I have 4Runner I'm looking into adding almost the same setup but not that intricate as what you have built for this 4Runner.👊😎👍

[@alwindsouza633]

Your design is the best 👍🙏🙏

[@richardsnation4609]

Beautiful work!! I the custom ideas that you have. Totally what I've been looking for. Awesome!!!

[@explorethebush]

Man that’s quality and tidy work

[@gevorgnazaryan8720]

Well done. I am in the process of designing one just like this for my fj cruiser

[@claytongross5657]

This guy seems like a pretty cool guy, seems honest too. I wonder if he has any ideas for other suvs other than Toyota? I have a 2002 Mercedes ml500 suv and I already pulled the back seats. Its just a different area to work with because it steps down on the frame. So if you get a chance to look a one of suvs and have some ideas please let me know.

[@danmanx2]

Bro, you are sick with wood!!!

[@kevinjhonson5925]

That is such a good idea and the workmanship is so good. I think I’ll build one for the back of my CRV Just the size of my back area. It would save so much room for my work tools. Now mine will not look anything like that I most certainly do not have the skills to do it like this.

[@lonelyman6192]

nice design and building. thank you for sharing.

[@timbior]

Wow! nice clever build!

[@FraserImageTV]

Can you do one for a 2009-2013 Subaru Forester please and thank you !?!?! I’ll buy a blueprint too !!! Pretty please ! Love your builds !!

[@joyramospacilan900]

Beautifully done! Great work.

[@sandtracks]

Great work looks good, how about bolting the stove upside down to table than when you open the lid the stove comes with it an no more fiddling to get stove out?

[@SolidWoodWorx]

Could work ya

[@absurdfool]

an effective solution for the 4runner, cheerio

[@AnnieGill7]

Genius! Very special build!

[@colewalliser]

So sick dude!!

[@jorges2000]

Awesome set up. I would love something similar for my 17 Honda Pilot.

[@nohabloemojislosiento4930]

TRD pro 4runner? That is just pure flexing considering the TRD pro is 10k more for fox struts and the same performance as the TRD off-road. Lol. I love your builds though. You've got gen5 4runners down to a science, man.

[@Som3thingClever]

Wow awesome. I just stumbled onto this and I happen to be in Huntington Beach!

[@gomrko]

Well done. I like it, a lot. I may do something similar in my land cruiser. Could you put the drawers all the way forward to the front seats? I have that same stove. I think I would mount the stove permanently to a slide out shelf pretty much where you have it but a bit lower with room for a small bottle of propane. And maybe permanently fix the lid over the stove as another horizontal area close to the action.

[@SolidWoodWorx]

Yes you could do longer drawers, would just need to support them in a way more towards the front area.

[@michaelmichael3533]

How do you secure the platforms/drawers down? Trying to start a build soon and it’d be great if you maybe show how you go about securing/where depending on the vehicle.

[@HugoGarcia-mm2uy]

Great work again and again 👏

[@davemartin7227]

Amazing work as always! Nice job!

[@The_ElunduExpeditionProject]

Beautiful work buddy.

[@treemanchris]

Real nice work.

[@mictheflash]

Looks great 👍 you do brilliant work 😎

[@stevengatewood2725]

Very nice job.

[@chad4853]

This dude looks like a thor stuntman stand in actor. Rad drawers.

[@PatrickDanforth]

Great setup!

[@alfredobatista9818]

Nice job bro. I'm planning to make one for my Honda Oddessy

[@timgosney9949]

Best one yet!

[@johnrichards3666]

You're the best ... hands down.

[@jakemontoya9021]

Ok your builds are amazing! I def want to do something like this to my equinox

[@Espinal_424]

I commented on another video of yours and continuing on this one. See like in this video, you have one locking slide on the left and none locking on the right of each drawer.

[@SolidWoodWorx]

I replied to your comment

[@happycamper1687]

Beautiful job! Are you able to build one with half of the seats removed and the remaining ones in place?

[@SolidWoodWorx]

I have never done that.

[@mohammadajmalahmadi1764]

Sorry , would very much like to see if it works. Thanks for the post

[@lmac3229]

I love this!! Your work is very neat too. Any chance I can work with you and learn more woodworking skills while at it??? I want to do a build in my '17 Suburban. Have you done anything like this for a newer Suburban? I built a temp deck/bed for my last 2004 Suburban but now realizing I need to do more modifications to this newer rig before I can even start on a build.

[@jbrewcomesthrough]

How did you bolt the sleeping platform section to the 4runner? I don’t see any exposed bolt heads and it doesn’t go over the factory bolt holes for the rear seat

[@SolidWoodWorx]

We have a seat delete for sale on our website

[@hero2006]

I just subscribed. Excellent job. Thanks for sharing.

[@lovemind8466]

Have you ever done something to a Toyota Sequoia? Like I would love to add solar & LED & just about this same set up done to mine with a added camp kitchen to the back & Awning to the side..🤔..This would be amazing 👏

[@SolidWoodWorx]

I have built a drawer system but never electrical before.

[@aramatkinson]

This was amazing! Also love the window organisers, would love to know what brand they are?

[@jjoossee2000]

Very nice work. Are you ever going to make videos of the process?

[@SolidWoodWorx]

Hopefully

[@rachmuch5226]

good custom car for camping.

[@willkidd12]

How in the world do you install those coffee table hinges

[@kennyb214]

Any chance you could do a how to video on how to install those coffee table hinges

[@SolidWoodWorx]

I can try yes

[@خالدالمعلا-م5ل]

good job Is there a clip for how to implement it

[@iranpediusa]

Hi again buddy, could you please tell us what kind of paint you use on the wood because all the paint has smell specially inside the car and it’s always close . Thanks buddy

[@SolidWoodWorx]

No paint was used. Just a polyurethane clear coat.

[@iranpediusa]

@@SolidWoodWorx Thank you so much again 🙏🙏

[@beautifuldream108]

Good work.

[@ffield12]

Also might want to add drop down adjustable support legs once the rear drawers are pulled out

[@SolidWoodWorx]

The slides can hold up to 500lbs and are bolted to the vehicle

[@TommyKinsey1972]

really looks great

[@victorcianflone5093]

Great job.

[@CanadianCampPurr]

great ideas for sure!!!

[@J.Young808]

Hey an Overland Bound member

[@twodogsdave66]

Hi Brian, been watching your vids and you do really nice work. Would you show how exactly you build a drawer? Specifically, like how do you connect the sides together and to the bottom. Your drawers look super tight and was just wondering about your technique. Have a great day!

[@AAM70]

Good job

[@mr.bubbles8403]

I take it back this the build I would need. Driver side 2nd tow would still stay up passenger side would be bed. Behind 2nd row driver seat would be bottom slide on track/rail out for camp stove, top would be for the fridge. Drawers under bed and hinge like to access cargo area under bed that would be behind passenger seat. Driver side 2nd row seat area would serve as office etc... That's the idea I have.

[@ru4reel2014]

Hey mate nice project

[@ernievilla0]

Been catching up with your builds. Really cool and ingenious ideas! Are you able to share where you source your drawer slides from?

[@SolidWoodWorx]

You can find them for sale on my website here: solid-wood-worx.myshopify.com/collections/hardware/products/60-locking-drawer-slides?variant=32031026872375

[@linhtieu3922]

Love your work!!!!!

[@mrfixer987]

Wood you be able to pull a drawer and show how its mounted to the floor?

[@SolidWoodWorx]

I dont have this vehicle anymore but you can watch this video on how my dual drawer system gets mounted. kzbin.info/www/bejne/iKS1lJyvfK-Wi80

[@roadboogie]

Very inspiring your chanel! I d like to know about where and why to place that „coffee-mechanic“ exactly? i def will work with that in my van too. thx for sharing knowledge and concepts! stay well and happy thou.

[@SolidWoodWorx]

Sorry but i dont have any dimensions for that unfortunately.

[@massyz2968]

Nice job! Could you build that for others (customers)? I have 4Runner 4th generation

[@SolidWoodWorx]

Yes

[@moraheem8292]

How much does this cost just an estimate if you just want it to stop behind the back seat? Neat work 👍🏾

[@djcasper69]

that's what I need.

[@ecruz2987]

He I like it 👍 , how much is 2021 4Runner ?

[@SolidWoodWorx]

Can find more info on Solidwoodworx.com

[@ecruz2987]

Ok thank you.

[@katiedodge1273]

tbh i love brian

[@maycoramirez188]

I really like this ? bro what’s the price for this one I’m interested I live in San Francisco ca ?

[@SolidWoodWorx]

You can find all information on our website www.solidwoodworx.com

[@johnkassay7064]

I really like your design, and the quality looks good too! How do you attach the drawer slides to the drawers and cabinet sides? It looks like some sort of thru bolt??

[@SolidWoodWorx]

Yes a furniture bolt or sex bolt.they call it

[@erniegarcia4724]

This is a cool set up... I'm looking for this set up for my 3rd gen 1998 4RNR. How long does this take for you to do and install? And 💰💲😎

[@SolidWoodWorx]

Please email me for more info [e-mail]

[@biggun98056]

What kind of wood are you using I like the look of it thanks

[@SolidWoodWorx]

Luan