Crazy Lawn Tractor 100HP Upgrades: Lights, Foot Controls & Big Test

[@DanKoning777]

Besides loving what you design and build, I also appreciate the fact that you're willing to show us the areas that need improving-and things like running out of gas. 🙄 👍 Good stuff *as always.*

[@WorkshopFromScratch]

Thank you 😁

[@jeffbarr951]

Yes I agree a high back bucket seat, small wind screen, and maybe a 3 arch roll cage ,like you see on tractor pullers.

[@matiasqueijas9880]

que increíble trabajo!!!...ya el vídeo anterior lo mire dos veces!!....lo único que le agregaría en un futuro sería un medidor del nivel de combustible no?. Saludos eres un genio!! exelente trabajo !👏👏

[@WorkshopFromScratch]

Gracias😁

[@justjackfromsc]

Love your videos. You build some bad ass stuff. Thanks. Only two things I would recommend on this build is a higher back on the seat and a small wind screen in front of the instruments. That things has got to have some serious throwback.

[@WorkshopFromScratch]

Thank you 😁

[@robertruetting1482]

BAD ASS... The shifter was a big upgrade... great build... you are the Man...

[@roypatterson9910]

Those lights you put in as headlights, those are fog lights, at least they sure look like it, they look like the fog lights I used to have in my car years ago.

[@dav1dsm1th]

"You're gonna need a bigger tank". Thanks for the videos.

[@WorkshopFromScratch]

And a fuel level indicator 😂 Thank you 😁

[@SmeetsDesign]

Creazy project, its nice that the engine is so nice intergrated in the chassis! Im also building something with the same engine, seeing this gets me motivated.😅

[@WorkshopFromScratch]

Thank you 😁 You create a great channel 😁 I'm going to start watching your videos 😁

[@SmeetsDesign]

@@WorkshopFromScratch Thanks!!!, I really apreciate this😀

[@DatDude-po5dq]

🙂 Awesome Upgrades!!! To you Master Piece!💯

[@mlsargent51]

I saw the thumbnail pic, and knew I want 1, and know I'll hurt myself on that thing! LOL I must have missed the build video for this thing. It looks awesome!

[@grzegorzolek9219]

Następny upgrade - wskaźnik poziomu paliwa😂

[@WorkshopFromScratch]

Hehe 😁 jak się skończyło paliwo to dopiero o tym pomyślałem 😂

[@kentuckytrapper780]

Well now you got me wanting one 😅...great build..

[@WorkshopFromScratch]

Thank you 😁

[@zacharywong483]

Terrific work, as always! Great video!

[@francesco_maggio]

Mamma mia che bello! Sempre stupendi i tuoi video. Secondo me la tua bravura supera ogni genere

[@WorkshopFromScratch]

Grazie 😄

[@anthonycooper1725]

Wider a arms ect will be good for stability mabey power steering nice build

[@Wheel_Horse]

Awesome machine! Need some electronic paddle shifters on the steering wheel though...

[@WorkshopFromScratch]

Thank you😁 Cool idea, I have to think about such a project with building a gear shifting system with paddles shifters on the steering wheel😃

[@tedbastwock3810]

Is this for a competition or something? This is probably your most epic build, watched the other video on this vehicle 3x as with most of your videos, love your channel so much. Great drone shot by the way! I think I love the place you live as much as I Iove your builds!

[@WorkshopFromScratch]

No, this is not a competition, I am building another quite big project and I didn't want to leave you without a video for a longer time:) Thank you for watching the channel, I live in Poland, Poland has a beautiful countryside but at this time of year it is quite gray and gloomy😀

[@Quebecer_Powerstroke]

Insane build sir ! You work really well. 👌

[@WorkshopFromScratch]

Thank you 😁

[@vinceianni4026]

Good job mister well done

[@WorkshopFromScratch]

Thank you 😁

[@Sovereign86]

Bro, you need a bigger *gas tank* man! Love the build!👍🏾👍🏾👍🏾

[@MrBirimbondo]

Dá pra se divertir muito ..!!! Show ! 😉

[@roypatterson9910]

On the foot mounts, you could have just put sandpaper that they sell for skateboards on it to stop your feet from slipping.

[@CustodiopatricioTrujillomarcha]

Amigo tu canal es genial buenas ideas y buenas construcciónes lo veo con un poco de envidia pero envidia sana 😅 el like siempre te lo ganas saludos desde Chile 🇨🇱🏜️

[@WorkshopFromScratch]

Gracias 😁

[@markprice961]

very nice work, sir.

[@WorkshopFromScratch]

Thank you 😁

[@davestahl572]

You can outrun anything, except the gas station, it seems. Nice!

[@nathkrupa3463]

Good work sir 😊

[@marcelbron6128]

I see a quad with some tractor covers....

[@madeforoutside]

What have you built? Please share.

[@mudbunny6388]

Now, maybe a rear hitch and a trailer for a quick trip to the market. Ya got to eat, ya know.

[@FrancoRoya]

Looks like you used contact cement for the foot rubber mats. You used a plate and clamps to put pressure on it but that is not best. Shoemakers use a much better method that is to just go to town on it with a hammer. In your case using a soft rubber mallet would be best. You could still do it even after it's been a while since you put it together. I recommend you do it as even if your feet put some decent pressure on the center, the edges will start to peel first.

[@WorkshopFromScratch]

I didn't know about this method, thank you very much for your valuable advice, tomorrow I will definitely try to use your method if the glue is not fully cured yet😃

[@FrancoRoya]

@@WorkshopFromScratch It's not about how long to wait before the two pieces are fully cured or not. If it is contact cement then, you'd have had to apply the glue to each piece and wait for a bit for them to "tack up" which is the point when it no longer stick to your finger to the point it wants to lift off the piece. And that is a cured as it's EVER gonna get, it will always be flexible, no matter how many decades pass. What's important, and the reason why it's called "Contact Cement" is to make sure that every square millimeter of the glued pieces are in contact with each other, that's why the smacking is needed.😉

[@IceBerg2k]

I wonder if you got your steering alignment right. it looks like he's pulling a bit to the left. Laser alignment in a car garage might have a positive effect on the overall handling.

[@WorkshopFromScratch]

Thank you 😁It took a lot of work to align the wheels, but I managed to get them right, just unscrew the steering wheel and adjust it until it's straight 😀

[@roypatterson9910]

To me, I would want to pull back on the shifter to shift up, and push forward to shift down. That's just the way I would like it, but you have to have it to the way you like it or it wouldn't feel right to you.

[@JonDeth]

Well, these are officially tractors vs a lawn mower so 100 Hp isn't exactly unusual, it's just all that speed is! lol My lawn tractor is bad ass and when you have one rather than a riding mower, it's not the least bit surprising that people will convert them the way you have. Mines much too fast for what it is already lol.

[@MrAussieHomeCooking]

Next thing would be a reverse gear 😂 👍, great fabrication work

[@WorkshopFromScratch]

Thank you 😁

[@pezz38]

Very cool Sir.

[@ronjon5386]

Awesome

[@trashonecoats5109]

You should try to experiment with pedal shifters

[@WorkshopFromScratch]

I thought about that too, but I don't know if it wouldn't make driving more difficult. I still need to practice a bit in this vehicle to change gears faster:)

[@srimulyono8309]

Amazing

[@09FLTRMM77]

MM77 Approved 👍🏼 👍🏼…………………………………………………………………………Totally useless……………………and it’s AWESOME !!!! 😂😂

[@WorkshopFromScratch]

Thank you 😁

[@roypatterson9910]

Where did you get those turn signals and tail light?

[@fajex]

Super.

[@fsipek5463]

Gdzie kupiłeś zawieszenie przód jeśli można spytać?

[@slawekgraczyk1484]

Mam go pcham go 😂

[@WorkshopFromScratch]

Hehe 😂

[@jericolopez8407]

Next build mini jeep with predator engine.

[@WorkshopFromScratch]

Maybe I'll do something similar someday, but I love motorcycle engines and I'd rather do it with an engine like this :)

[@SDS-1]

Vrooom 😁💕💕

[@JamesFox1]

ran out of gas and that long push back , omg

[@harkbelial]

V8 next one💪💪💪💪 let's go crazy!!!!

[@РоманГордеев-к3и]

Не вижу смысла в линзованых фарах, если они перекрыты рассеивателем🤦🤦🤦

[@simonburri8178]

Super gut 💪🤣👍🔧🔩

[@derikhed]

sentimental

[@robertpawlak]

Okolice Łowicza?

[@WorkshopFromScratch]

Do łowicza mam 80-90km :) Bliżej Warszawy 😁

[@robertpawlak]

@WorkshopFromScratch tereny znajome jakos, ja pochodze z okolic Kutna ;)

[@eduardorizo-id5cr]

how much do you want for it?

[@WorkshopFromScratch]

It is not for sale😃

[@DaveGasser]

Hey there i would love to have contact with you💪 i really want this tractor i would pay good money for it are you down?

[@WorkshopFromScratch]

I'm sorry but it's not for sale :)

[@Bill_from_Nantucket137]

This lawnmower vs the big block lawnmower

[@johnpreston9844]

J'aurai taraudé les pédaliers afin de ne pas avoir les boulons apparents.

[@alsoleo77]

I believe that for a 100hp tractor, I don't know the torque on the rear wheels... The rear axle doesn't seem very robust! How about a more reinforced axle?

[@IceBerg2k]

That axle is solid steel. 🦾

[@harkbelial]

This is for entertainment purposes only not mass production.

[@rubberduck4966]

A Differential is missing, too.

[@SuperBillyb1]

if 100 hp can perform like this don't put a 1000 in it

[@LovesM855A1]

It needs more power……

[@LostDryerSocks]

He's giving her all she's got.

[@rubberduck4966]

This is still NOT a Lawn Mower as its missing a essential Part: The mowing deck.

[@yamahabasher1]

Semantics.

[@rubberduck4966]

@@yamahabasher1 As this thing only has the Engine Hood and the Seat from an Lawn Mower this is just a GoCart with a way to fat engine and some minor relevant Mower Parts.

[@yamahabasher1]

@@rubberduck4966 dude. Lighten up. It's not that critical.

[@janwanrooij5365]

Cal your wife for gas ( sorry yam dutch)

[@WorkshopFromScratch]

I didn't have a phone and my wife was operating a drone far away from the car😅

[@TylerDurden0331]

Nie mogę pojąć bezsensowności takich projektów

[@grzegorzolek9219]

Nie podoba się? Tam są drzwi, zamknij je z drugiej strony