Making easy vinyl stickers at home with a laser printer Sticker Business

[@AbnormalArtsDOTcom]

Hey there. I thought I'd give you a tip. When using a laser printer, you don't have to add lacquer or any other spray fixative or protectant layer to your printed images. Laser printers use toner, which is essentially a plastic colored powder that is heated with the laser toner, which melts the colored plastic powder (toner) onto your paper (or, in this case, vinyl). Laser toner is completely waterproof because it is not "ink". I was searching for somebody who had tried to print on vinyl with a laser printer because I knew it would save me some money to print my own designs with my laser printer, then cut the designs with my cricut. I'm glad I found your video. I wasn't sure if the heat from the laser printer would melt the vinyl or ruin the printer by melting the vinyl into the printer! YIKES! So, I'm glad it worked for you. So, this is a bonus for both of us. You don't have to spray those skickers. They will not bleed. The toner is just melted plastic, so it's kind of like adding another layer of plastic to your sheet plastic (vinyl). I hope this helps! By the way... great video. You took your time to help people, and adding each phase of the process is helpful to people.

[@redgeminipa]

It may depend on the "laser" printer/toner. I just tried printing on Oracal 651 using my Ricoh LED "laser" printer, and the image will easily scrape off with a fingernail.

[@ZeRockOfficial]

No offence but you have no clue what you are talking about. Laser printers are not a better buy and not cheaper……have you compared toner carts to a Epson eco tank ink jet? I don’t know why you are saying Laser toner is water proof and “ink” is not , that is false. Also “ink” is waterproof. If you are using non waterproof ink it is because you have no clue what you are doing and are using Dye ink and not pigment ink like you should……. Cheap crap inkjet printers have dye ink. People that know the business use pigment ink which is based on the price of the printer you gotta spend around $800-$1000 for a good pigment ink ink jet printer. I’ve put my t-shirts printed with “ink” threw threw a wash test….. Went threw 25 times…… Strange how you say ink is not waterproof but sure enough no special treatment just print to wash 25 times and it’s still all there…… Stickers I print no special treatment just plain vinyl and or glue backed paper I have left in a glass of water overnight…….no colour bleed. Can you define your definition of waterproof please? PS: I use a Epson Eco tank ET-5170 Inkjet to print stickers,t-shirts,bags,hoodies,pants,work uniforms,ect…….no issues with water.

[@ZeRockOfficial]

@@oldstoic3154 I do it all with heat transfer. My shirts pass the 5 wash test and then it passed the knife test, where I literally take a steak knife and try and scrape it off…..doesn’t come off……. This @abnormalarts has done next to no research and has no clue what they are talking about and is giving people store ly bad advice, laser printers you should avoid like the plague seriously that are all trash every single one of them literally. Biggest money sinks around.

[@ZeRockOfficial]

@@oldstoic3154 also pardon my spelling I’m in the middle of a order printing shirts typing fast 😂

[@AbnormalArtsDOTcom]

@@ZeRockOfficial For the record, I never said that "ink" is not waterproof. I simply said that toner is waterproof.

[@bachokeduniya8782]

I’m a plumber and wanted some stickers for my toolbox but couldn’t find any that I liked. Thought I’ll make some of my own and found your video, what an absolute great video 👌👌👌👌 thanks 😊

[@mapletrea]

It didn’t hit me that you could buy the vinyl rolls and cut them down yourself for so much cheaper! This was a very enlightening video and was indeed very helpful! 😊

[@mhairigilmour7980]

By far one of the best ‘how to’ videos out there! Fantastic! Thank you!!

[@alfonsocorona1008]

Thanks for the video! How funny, a lad from Pasadena California watching a lad from the UK wearing a Pasadena California shirt! lol

[@Akirashenka]

Another great video - thanks! It's good to see you again.

[@oilyragsgarage7200]

Thankyou so much, I just did this to create some small decals for my tractor. Saw a comment below about not needing to add any clear lacquer. In my opinion I think a few coats is a good idea, especially if the decals are being exposed to the outside elements.

[@reviewthat]

Glad it helped

[@carymartz8762]

Congratulations! you are the first person to create a file called "Lawnmower Stickers".

[@reviewthat]

Thanks 👍

[@machouston6448]

Hi Martin, Great Tutorial, forever the professional

[@susanglaus4312]

Love the video. Very informative. I never thought of laser printing onto vinyl and will definitely give that a go!

[@reviewthat]

Make sure you set the printer onto transparency setting.

[@EunequeW]

I’m so glad I found this video! I have the same exact printer and this worked perfectly!!!

[@reviewthat]

Glad I could help!

[@michaelosullivan8288]

Your such a good fella with respect of showing everyone how you do some.of nice stickers printing turn out best to n jobs and your the man of heart and don't know what people gonna do without you and cheers for videos thumbs up to you

[@reviewthat]

Thanks 👍

[@mixinmagic5995]

Great to see you back Martin. Never thought of using reg marks on vinyl. Nice idea of using sticker vinyl with lacquer. Cheers.

[@reviewthat]

It works well. Never thought of it before but it occurred to me it might work.

[@Lizziefij]

This tutorial is exactly what I've been looking for!

[@jaynjen]

Wow have same printer, never even thought printing direct to vinyl. Curious know effect on different colors other then white (use this technique to make us of scraps). Thanks for tip. Cheers

[@loveunlimited777]

Legend! Thanks for sharing your insight and skills. 🙌

[@reviewthat]

My pleasure!

[@chrluc]

Wow, really miss your old videos, good to have you back!

[@reviewthat]

Thanks bud

[@thejetshowlive]

Great tutorial, totally appreciate it! Greetings from Pasadena Ca.!!

[@barneykennett9282]

Cheers Martin, clear and concise explanation... 👍

[@100roberthenry]

great video, i just need black toner on clear vinyl...(with transpraency settings to not melt in my mono black only laser printer) ..what is the gsm of this vinyl, will it go through a laser printer with no issues, im looking at the ''Ritrama L - Transparent (305mm 5m) from mdp supplies.. .cheers mate, keep up the good work. thanks.

[@georgeyjung350]

Nice vid mate lots of useful info keep them up matey Al be watching, defo changed my mind for printers cheers mate

[@Rockstars-Gig-Memorabilia]

Thanks for this inspiring video. Love that cutter!!

[@reviewthat]

Thanks for watching!

[@kctsp6631]

Happy New Year, nice to see you back making videos. I like this video, I'm going to have to try this. Thank you for sharing.

[@majkimajk81]

It's good to see you back brother. Happy New Year!

[@ROLYTHETAXI]

Martin. You’ve actually thought me allot over the last few years and thank to you I’ve made lots of money selling merchandise for our dog rescue. If I but the HP M252DW like yours is it 100% going to print on sign vinyl. I bought a new BROTHER printer but their printers won’t print on vinyl so I’ve sent it back to supplier. Thanks again for all you knowledge and online training.

[@reviewthat]

Yes as you can see in my video I print on vinyl but make sure you set the paper type to Colour laser Transparancy in the printer preferences or it will not print properly and make a mess.

[@ROLYTHETAXI]

Home Print thanks again Martin. I appreciate the help.

[@ROLYTHETAXI]

Printing vinyl stickers is great, thanks again Martin

[@creativy7225]

Awesome video, thank you so much, one of the best at instruction and demonstrating!

[@reviewthat]

Glad it was helpful!

[@veloplays7805]

Welcome back. I hope you keep uploading video's because i really like your channel. Best wishes frome Germany

[@petefroud5308]

Great job Martin .

[@CheapCheerful]

Great video mate.

[@invertedreality887]

legend mate, thanks for taking the time to share

[@carterscreations5791]

Welcome back Martin. Love your new surroundings. Great vid!

[@reviewthat]

Thanks bud.

[@jamiescountryliving]

Wow!! Thank you. Could you do this using an ink jet printer?

[@reviewthat]

Yes you can!

[@jamiescountryliving]

@@reviewthat thank you😀

[@G6-gaming]

Guys hit the like button this guys made a fantastic video 👍🏻

[@stujham]

Just found your channel and subscribed, confident, pragmatic and no fuss. Given me some ideas on refurbing some damaged vintage audio fascia's, namely a vintage synthesiser. Keep it up and stay fit fella!

[@reviewthat]

Awesome! Thank you!

[@Mypenleaks]

Excellent video. Cheers

[@reviewthat]

Thank you! Cheers!

[@RichardCrummy]

Great to see you back and doing vids again :)

[@konstantinatsatsi8201]

Thanks for the info. Super helpful!! Can you please tell me the model of the cutting machine you use or if you have a similar (small like yours) to propose?

[@reviewthat]

I use a Silhouette Cameo

[@KolyaNadj]

Nice video man. This is what YT is for.

[@richardsmith9798]

Hi Martin..really happy you are back doing these type of videos..I do miss the t-shirt and cup videos...This is a cracking idea .I am going to mdp at the end of the week to pick up some of the Ritrama L range in white and transparent ..getting this as it has a high temp tolerance All the best for the new year Rick

[@reviewthat]

That's right Rick, the high temp is ideal for laser printers.

[@TheDemolitionman123]

Hi Martin, great video. I cannot believe the amount of effort and time you have put into your videos and the skill of getting accross all that counts to people like me. Truly inspiring. Can I just ask, is your training DVD/Video still available? If so, how and where can I buy it?

[@reviewthat]

You can get the training online in the link www.udemy.com/course/how-to-start-a-t-shirt-transfer-printing-business-from-home/

[@yasinsaglam4158]

Thanks for your work and video very much. Should it better or not using glossy transparent vinyl?

[@reviewthat]

No need

[@Oeg925]

Great informative video.. thank you Martin

[@reviewthat]

Glad you enjoyed it

[@marie7178]

Hi Martin! I just stumbled upon this video and I have to say you are fantastic! I never knew this would be possible and I was already saving to buy a Roland. But this is definitely more cost efficient. I do have a question when you print is there a certain setting setup for printing? Or do you just print it like normal? Thanks!

[@reviewthat]

I use the laser transarancy profile when printing onto the vinyls in the printing options for the type of material.

[@barrythornton9947]

Thanks for the video . Been trying it without success, and also on printable vinyl for laser type paper. Can i ask what paper settings you used on the printer .... i think the problem is somewhere there , as most lasers would not have a vinyl option and would reccomend not using it due to the heat.

[@reviewthat]

You need to use Transparency settings so the vinyl doesn't melt in the printer.

[@barrythornton9947]

@@reviewthat thanks for replying ... will try that .

[@chrispickering8812]

Damn dude I wish we weren't thousands of miles apart.id buy everything I need to do this.im constantly pressure washing my equipment and blowing the decals off.this is awesome wish you were close I'd aggrivate the crap out of you till I learned.LOL!!!

[@brotherernest5993]

This will not have a very long lasting life. My recommendation if using laser printer stickers is to cover it with lamination prior to cutting in your Silhouette. I use a solvent based printer for my car decals and or I’ll use my Oki laser Printer and cover the print with thin lamination. I have huge 13 X 19 inch decals on my car that have lasted years before I started using Eco Solvent printers.

[@reviewthat]

Yes I will be showing that in a later video, This was a test that allows me to make vinyls without a solvent printer as you well know.

[@motorpimps6881]

Does an OKI also have a setting for transparency? OKI is cheaper than HP and i'm on a beginners budget.

[@tonyfrewin4822]

Great video. Thanks for sharing.

[@reviewthat]

Thanks for watching!

[@chrisjohnson4386]

Great video. So informative.

[@ROLYTHETAXI]

Martin please can you send us a link for the cartridges for the printer, I’m going to buy the printer if you recommend it, we do all our own stuff for Bulldog Rescue and we’re going to start a bumper stickers line x Roly xx

[@reviewthat]

I just search Ebay bud. they come up quite often.

[@Jpcars636]

Great video Martin

[@reviewthat]

Thanks 👍

[@Jpcars636]

your welcome mate

[@Jpcars636]

Home Print what printer would you recommend and plotter I only want to do air brush stencils for car panels and stickers for cars. And bikes any advice would be excellent cheers

[@paddlesworthrcpark8215]

Great vid what type of printer would be best for printing on vinyl car sticker lazer or ink jet or sublimation thanks trying to make sticker sheets for my model cars and that paper sticker they call vinyl is no good

[@reviewthat]

Lazer would be best for vinyl. Don't listen to the shops, they say uoi can't print on these vinyls but as you see, You can.

[@nightjarflying]

Hi Martin. We're getting into vinyl stickers to make counters for board wargames [a commercial enterprise] & this video has already saved us money - pricing up the wrong kit & materials for the job before now! Do you have a Patreon or similar - send you a few quid? QUESTION: Which is the best cutting tool for the Cameo for small square vinyl stickers [say 19mm x 19mm with rounded corners]? Thank you very much.

[@reviewthat]

Hi bud. Not sure about the best cutting tool as I only use the standard one and that works fine. Glad I saved you money bud.

[@clairelkhan]

Just for info... You don't need to coat it with the lacquer if you're printing with a laser printer because toner is waterproof, you need to coat it if you use inkjet though...

[@reviewthat]

the lacquer provides UV protection or the print will fade in sunlight, that's why you lacquer.

[@marinrezaie]

hi, thanks for sharing your knowledge. could you please put the link to buying vinyl sticker? or wright the name of company? is it Oracal, Detape or Ritrama? is it gloss or matt? Thanks

[@bryanvanmaalsen2697]

Really awesome to have you back Martin!! Great video again. Didn't know vinyl can run through a laser printer. Can you show us a test with vinyl for tshirts and how it turns out when pressed with heat press. Looking forward to more new videos 👍🏾👍🏾. Cheers Bryan

[@reviewthat]

I don't print t shirts any more Bri, sorry.

[@Will-ul9oc]

You can get Vinyal that can be lazer printed and I have used some for window stickers in the past. If I remember it was clear laser printable Vinyal. But I have never used Laser Printable Vinyal for clothing although I am sure you can obtain it. You do need to be careful when printing on Vinyal with a Laser dont do what I first did and use normal printable Vinyal because you will just melt it in the printer and need a new drum and toner.

[@ginnertube]

What a lad! Cheers mate!

[@hendrarosa]

Brilliant video! I couldn't find any HP m252dw printers around my region, are there any other models or brands that you would highly recommend to replace the HP M252dw printer?

[@streetwarrior8853]

Holy freak, Love this video never knew this is possible.

[@Khryptic]

Interesting video man cheers its give me some ideas

[@VanessaTimCorwood]

Hi Martin, how do they hold up out in the sun? Do you find that UV light makes them fade, or how quickly do they fade? Im in Australia and wanting to make weatherproof and UV proof stickers..

[@reviewthat]

You'd have to check the ink you use to see if its UV protected.

[@bhadddar]

Hey, Just a quick one. I believe the end result had the stick side on the back right? What if i want to have the sticky size on the print side itself so o can stick it from inside my home windows and car windows? Regards

[@reviewthat]

that would not be possible with this vinyl

[@mn-lw5qv]

Be careful because vinyl can potentially melt going through the laser printer and ruin the machine. I’ve done it myself hahah also had a close call with another laser printer doing the same thing. I am super into what you’re doing - keep up the good work

[@reviewthat]

Thanks bud

[@carlilafond5943]

Hi m n, I would just like to know whether there is a way to know beforehand whether your laser printer will have an issue with the high temperatures melting the vinyl? Or is it just simply risky to do this and better to get a cheap inkjet printer rather for this purpose?

[@_desertwalker_]

Gday, I have an okipro8432wt and I printed staright onto white vinyl. It scratches off very easily so you have to apply a laminate of sorts else it's all over red rover.

[@Door26-mi3fz]

@@_desertwalker_ you would need to get a vinyl for laser printers they are available. The reason why it’s scratching off is your paper setting. You would need to go to a heavier paper setting in order for the toner to fuse properly onto the vinyl. So heavier paper setting and use a approved vinyl for laser printers.

[@OccupyBlackMedia]

wow..I had to check your upload date when you said cs3... I learned on ps6...

[@marcw205]

Great video

[@tonimoreton3136]

Hi Martin got to say I love your videos i do mugs tees etc because of you lol:) I saw this video a few weeks ago and went out brought me the printer (hp M252dw) at the time I (only had ink and sub) So my problem is Its smudging once I put in my vinyl in :( but great on paper. I managed to do one sticker without smudging which went print and cut on my silhouette cameo3. Any help with this would be great Toni.

[@reviewthat]

Yes Toni, When printing onto the vinyl, you need to go into the printer settings and change the paper type to "Colour Laser Transparancy" and then it won't stick and smudge bud. Cheers Martin

[@tonimoreton3136]

@@reviewthat Hi Martin Just done it great no smudges Thank you for your help, Your videos really inspire us to do projects and thank you sharing your knowledge once again. Toni

[@ytcanada]

Thanks from Canada, great video and a very clever idea! Just out of curiosity whats the shelf life for these stickers out in the field?

[@reviewthat]

I've used them on a lawnmower sitting outside for 2 years with no fade.

[@ytcanada]

@@reviewthat Very impressive, Kudos to you for giving a shot, what exact brand of vinyl are you using?

[@barrythornton9947]

I can see it works , and looks like just what I need , but what sort of life would you get outdoors ? The sticker on a lawnmower will take some weathering ... similar for a bumper sticker. Im not talking about the vinyl, thats outdoor vinyl , but the toner from the printer .

[@reviewthat]

Its the lacquer that provides the weatherproofing and UV protection so use a good lacquer bud.

[@richardroebuck1915]

Where do you buy the replacement toner cartridges from? I assume they are third party and not HP, given the price??? Thanks :-)

[@reviewthat]

I just get them from Ebay.

[@mikeper4572]

to print vinyl on a laser printer do you need to use the spray on it

[@Divyaayaa]

wow hey thanks for the tips totally helpful.

[@gregger6868]

What a nice guy, thank you!

[@1plus1equals69]

Really nice video! Is it strange that I hear Korg from Thor?

[@glynharding8109]

I enjoy your videos. Really easy to follow too. How have the lawnmower stickers lasted after 9 months?

[@reviewthat]

Still fine

[@WorldwideStreaming]

will this work with an inkjet printer

[@reviewthat]

Not tried it.

[@2handsomeforlaw]

Great tutorial, many thanks!

[@reviewthat]

You're welcome!

[@SasamiRari]

do you do stickers? I am trying to find SOMEONE to help with my stickers. I use an EcoTank for printing my stickers and ive tried using a Canon as well. ALL of them seem to fade or become "runny" if they are outside for longer than a week...I have even tried using clear coat spray AND even used clear vinyl (oracle), but it all did the same thing. I've noticed a good number of these "bumper stickers" or stickers you can buy at your local corner store/gas station seem to be made using some kind of "textured sticker paper" that feels like a smooth truck bed liner...but the backing on the paper says Oracle as well, but i cannot figure out what kidn of paper it is. Any suggestions anyone?

[@TeamBissevov]

Whats the name of the vinyl from MDP supplies?

[@reviewthat]

Its the DE Tape 5-7 year one.

[@createmorestuff]

Just looked on MDP supplies and there are a few confusing choices?? do you have a link to the product please ( printable laser jet vinyl )

[@reviewthat]

They won't tell you they have a printable Laser vinyl. I use their DeTape 650 Series Polymeric Gloss Vinyl. Make sure you change the printer settings to printing to Transparancey's or the printer will melt the vinyl.

[@simonnewsham8536]

Thanks Martin. Where do you buy the replacement toner cartridges?

[@reviewthat]

I get them from Ebay.

[@tonymarley1]

Hi Martin, can I ask, did you use any special setting on the laser printer.? like print with lower heat setting so the vinyl doesn't melt? Thanks in advance. great videos by the way!

[@reviewthat]

You need to use Transparency settings so the vinyl doesn't melt in the printer.

[@coogarc670]

Welcome back Martin Happy New Year is it possible you can leave a link for the vinyl please

[@deakdeagen938]

Forgive the question as I'm sure I am showing my ignorance but how do you get them to stick on the lawnmower engine cover? Is there adhesive on the back or how is it done?

[@reviewthat]

Yes, it is sticker vinyl bud.

[@stepzy3]

Great idea . Thank you so much :)

[@Matteyc1343]

Are the finished stickers also scratch-resistant?

[@jamiekazemi5132]

Really good video, thanks for posting. Can you help out with what rolls of vinyl you bought for your laser printer? I've been on MDP's website and phoned them and they told me about the A4 laser vinyl sheets. I want to buy rolls as they will be far more cost-effective, I'm just not sure which one is suitable? I hope someone can help? Cheers

[@viliusvilkas]

He used detape 440 white gloss

[@viliusvilkas]

Btw detape440 heat resistance is 80deg celsius. So better go for detape650 which have resistance 105deg celsius

[@TheTerryWood]

I cannot find a transparency setting on my laser printer. Can it still be done

[@reviewthat]

Not really, it will melt the laminate

[@mandymarten9932]

Hey! This was super helpful!!!! But i have a question.... what happens if you dont spray the sealant on the fresh ink on vinyl??? Will it smudge off? how resilient is it? Im using stickers for indoor use so.... just wondering how it would last without a final layer... THANK YOU!!!!!!!!!!!!!!!

[@reviewthat]

You could give it a try, It just gives them extra protection.

[@pwntbyjj]

Awesome video. I have a question, is it print prone to being scratched? And how waterproof are they? Thanks.

[@reviewthat]

As waterproof as the lacquer you use.

[@motorpimps6881]

Have you ever had it melt or stick to the drum? What does the transparency setting do?, reduce the heat? I'm so tempted to buy a laser printer because inkjet is costing me so much.

[@reviewthat]

Yes I have, that's why you use the transparency setting as it is cooler.

[@motorpimps6881]

@@reviewthat Thank you so much for helping, you are so correct as MDP did only suggest the expensive laser vinyl and also said I would not be able to laminate by hand. Do you know if a transparency setting is standard for lazer printers?

[@RealCheeseOnly]

Fantastic. Thank you

[@paultheseer]

Hey great video I’ve got this printer and have had huge issues with compatible cartridges .. I read you said you got them from eBay but could you please share the seller or the brand as theres so many on there and I’ve wasted a lot of money on duds

[@reviewthat]

I can't remember the suppliers, sorry.

[@Rockstars-Gig-Memorabilia]

Did you by chance have the right printer for this or did you have to experiment? My Samsung is way too hot, just melts my vinyl?

[@reviewthat]

Put your paper settings on Transparancy and it won't melt the vinyl.

[@andycousins5016]

Spot on pal is it only white vinyl u can used and can u use dye based ink to print them with ta

[@reviewthat]

I would suggest dye based ink from an inkjet printer would not really work in this case Andy. You would need special inkjet printable transfer papers and they are dear. That's why, I like this method on standard sticker vinyl.

[@leestevens2305]

Hi Martin loving the video mate, just a quick one I've tried looking for that vinyl you use on MDP but can only find a4 and no rolls sheets any ideas, please? edit sorry ive just seen below lol

[@isobelshasha2095]

Have you encountered any issues with the laser printer melting the sticker paper and causing maintenance issues? Do you ever print large volumes of stickers?

[@reviewthat]

Not when you use the transparency setting. If you leave the printer on standard settings, it will smudge the ink.

[@philippalloyd3682]

Hi, just a quick question. Do you use the same sticker vinyl for the likes of tshirts or is that something completely different?

[@CarlosRamirez-jv9wv]

I'm looking for the same question and I learned is two different papers, for the t-shirt is heat transfer vinyl and the stickers is printable vinyl for sticker like car stikers. Are different time of stikers papers you can buy like water proof paper stikers, glossy papers and mate paper stikers. Hope I answer you question because I had same question. Look online for PRINTABLE VINYL PAPER.

[@reviewthat]

No, this is standard window sticker vinyl.

[@paul50pb]

Hi I am looking small football emblems of about 10mm, is there anyway you can do these if you do not have the stickers like you put into ur scanner

[@reviewthat]

Sorry bud, I no longer print.

[@subandvinyldreamers3063]

I bought the vinyl you looked to on MDP. Is it only laser printers that work? I can't use inkjet?

[@reviewthat]

I've not tried it on inkjet

[@jameskelly4621]

Great video as always. Can’t identify your vinyl on the MDP website, any chance of an product ID. Keep on teaching pal.

[@reviewthat]

I use the De Tape 5-7 year vinyl

[@paulyh4531]

Good video Martin , this video seems sharper than normal is it higher res or diff camera ? Good you renamed this channel you prob get more hits on it. Shame about the live streams really enjoyed them but as you say you prob bring them back at some point. I was thinking of getting portrait 2 cutter as don't need anything bigger than A4 . Cheers all the best to the family. 👍

[@reviewthat]

Yes the Portrait will do the job. This is my Gopro hero 7 black Paul.

[@paulyh4531]

@@reviewthat well it looked very sharp must been the lights in the spot on place 😉👍