Shield Speaker Cable with Mogami W3082. kzbin.info/www/bejne/mp-ul6yrnrxshZY
@dantwomey3 жыл бұрын
I tried these and ithey very well may be the end of commercial cables for me. This guy is telling the truth. Exceptional cables!
@dantwomey3 жыл бұрын
@Car Guy daddyo They sounded the same as some very expensive cables I have. That was the surprise.
@Scrufboy2 жыл бұрын
WOW! The sleeve on the ends... Stunning. I found another video, and made these in 9 foot runs. I have these in my bedroom setup.
@adriankelly_edinburgh Жыл бұрын
I made a 3.5m pair of cables for the front speakers in my home cinema system over the weekend using Canare 4S11 following this guide. The new cables replaced some relatively cheap bi-amp cables I'd had for several years so I made them up with 4 banana plugs at each end. The difference in sound quality is amazing - it's the closest I've heard to hifi sound from an AV amp and the cables aren't even run in yet. I'll definitely be making up a couple of sets of RCA cables using info from your other guides, so thanks!
@marekpienczewski8805 Жыл бұрын
hi Adrian is This cable version OFC ?
@robertnitsche84103 жыл бұрын
I was inspired by your Mogami diy speaker cable video to make my own speaker cables to replace Audioquest Rocket 88 cables. I realized i couldn't afford the Mogami at $5 a ft. and had heard good things about the Canare 4S11. I believe it was only $1.49 a ft. I followed your instructions, and they turned out great. Big sound improvement over the Audioquest cables I paid $350 for. Thanks!
@82ivaylo3 жыл бұрын
So you like Canare 4s11 more than Audioquest Rocket 88?
@robertongjunco4121 Жыл бұрын
Hello Robert. Is the canare 4s11 better than the rocket 88s?
@robertnitsche8410 Жыл бұрын
@@robertongjunco4121 I do like the 4s11 better than the Rocket 88. The 88's seem a little harsh and sibilant compared to the 4s11, which is still detailed and warm.
@robertongjunco4121 Жыл бұрын
@@robertnitsche8410 Thanks for your reply. I am now very curious. I have the rocket 88s . Imaging and the highs are quite to my liking but lacking a little bit of bass.
@marjanbjelajac511911 ай бұрын
Problem with little harsh and sibilant you can fix with correct IC or USB cable.
@SONOFMYPARENTS2 жыл бұрын
Hey man. I just want to thank you for your valuable advices. I made the Canare version of speaker cables after seeing this video. I am overwhelmed of the improvement. Hands down one of the biggest upgrades i have ever made. I run Focal Aria 948 with them. (Rega Planar+AT VM740ML,REGA MM MK3, Primaluna Prologue Premium Preamp and Ayon Audio 300b with s32b valves). I had QED XT40 till now( i wasnt a "cable believer"). The new cabels really transfomed the sound. I have now more of everything. The sound is really crisp, more revealing with exetremly tight deep low end. It is crazy that a cable swap can do this. Thank you again and i wish you all the good!
@Tharbamar2 жыл бұрын
I’m glad to hear it, happy listening and holidays!
@youtubegarbage78762 жыл бұрын
cables are cables... it is placebo.
@gershomww Жыл бұрын
Good morning, I just wanted to check in and say thanks for all the information and inspiration: I made these cables for my VERY beginner hifi setup(ProJect Debut Carbon Evo turntable into a Fosi Audio Phono Box X2 preamp, Integra DTR 30.5 avr & Integra ADM 2.1 amp running Klipsch 4.5 towers) and was stunned at the improvement...plus they look fantastic. The only thing I did differently was wear gloves when handling the bare conductors to keep skin oils off the copper. I'll be making power cables next.
@mikerieck3063 жыл бұрын
I followed your cable construction using the 12 gauge Mogami cable. They came out great and work great....very beefy cables.
@Velvet_Torpedo3 жыл бұрын
watched all your DIY cable videos a couple of times lately. find them instructive, entertaining and relaxing all at the same time.
@Tharbamar3 жыл бұрын
Thank you very much!
@ralphrosario13 жыл бұрын
This would be idea as a lot of people in the Chuchero world are looking for direction in this area and you have a lot of knowledge on these subjects
@1968krug3 жыл бұрын
I received the Canare cables a guy built for me. I’m so happy I can’t tell you. I decided to compliment my new cables with the same jumper cables linking my binding posts. I really wasn’t sure my vintage mid fi system was capable. I was considering upgrading my system, not any more! So much more sonic joy it’s unbelievable. The Canare 4s11 have blown me away. VERY Happy.
@Tharbamar3 жыл бұрын
Enjoy!
@muzlev00013 жыл бұрын
I have been using analysis plus 9 on my system for 10 years. After he turned green, he found a replacement. Stumbled upon Canare 4s11. Canare 4s11 sounds better. now it works on my system.
@falvegas5113 ай бұрын
We Played a Quality High Def Classical Recording BD-ROM -- Once with My Friends $240 (Purchased) Mains Cables Installed -- and then with My Home-Made $22 Speaker Cables Installed. We were Both familiar with the Classical Recording, having listened to it 'Live' At The Boston Symphony. WE FOUND "NO DIFFERENCE". My System is a Marantz A/V with 9 Klipsch Speakers.
@Tharbamar3 ай бұрын
Thanks for sharing your experience, Please note AVRs are not the best way to discern the difference in sound quality between the cables. No audiophile or HiFi manufacturers has AVR as their reference component.
@Broman71573 жыл бұрын
Thank you for your very informative tutorial. I've just made my first custom cables(Monoprice 12AWG Access Series ) based on your instructions and it came out pretty good..and my speakers sound soo much better.. Now that I know how to make them.. I will experiment with the Canare series next..
@SJ-lr8qm3 жыл бұрын
Excellent video. I made these cables over the weekend using your video as a guide and they sound great. Definite upgrade sonically and visually from the old Monster Cable I was using. Thanks for the excellent tutorial.
@Tharbamar3 жыл бұрын
Thanks for sharing, enjoy!
@gavriushka3 жыл бұрын
I was literally looking everywhere for a decent guide on how to make a good quality cables for my home theater/stereo system! Thank you, amazing video and guide!
@IliyaOsnovikov3 жыл бұрын
Just wire it differently. Red to red and white to white.
@gavriushka3 жыл бұрын
@@IliyaOsnovikov no idea what you mean by that 😅
@IliyaOsnovikov3 жыл бұрын
@@gavriushka If you decide to do these cables you would need to connect together red & pink and white & off-white wires. Not the way shown in this video. That's wrong way of doing it. Just read Wikipedia what is a Star-Quad cable connection.
@gavriushka3 жыл бұрын
@@IliyaOsnovikov in this case it doesn’t matter, as it’s not an electronic cable. Either of those specific conductors are identical to each other. So it doesn’t matter which ones you put together, as long as one end matches the other. Color is there just for your own reference and so you don’t accidentally reverse polarities on one end vs the other. StarQuad reference in this case means it’s twisted inside in a star pattern, and quad means 4 conductors.
@IliyaOsnovikov3 жыл бұрын
@@gavriushka Why doesn't it matter? The whole idea of the Star-Quad configuration means the connection together of the opposite ends of that "star" pattern in a cable. That creates a symmetry of magnetic fields that helps reducing cable's electromagnetic noise emission and also improves electromagnetic noise rejection. Otherwise the Star-Quad reference is just meaningless. Sure, that configuration is more beneficial for some low level signal cables like microphone cables. But it has some merrits for speaker cables as well.
@TheChez213 жыл бұрын
Just assembled these cables. The bass frequency is outstanding. I can't thank you enough I'm really enjoying my speakers once again. For any people who might have reservations about these cables just buy them you'll be very happy the bass extension is significant. Thanks
@Tharbamar3 жыл бұрын
They are one of the most overlooked cables in audiophile world because they are reasonably priced. Enjoy. Thanks
@BFArch0n Жыл бұрын
Just made these today, enjoying them so far. (about 5 min into my 1st listening session) :)
@media-karismatik Жыл бұрын
I have tried mogami, canare & klotz, they are very good sounding in mid range. Their soundstage are very outstanding.
@user-sj5jh8pl5q2 жыл бұрын
Hello there :) I have been used for a while this speaker cables with audioquest banana plugs. I can tell you just one thing... don't spend your time ( and money ) to find a perfect cable's... spend your time to listen music... Great video and great presentation how to do 👌👏
@dell1773 жыл бұрын
I made a 10ft pair of these a couple of years back and have been very happy with them
@hubert-williams33792 ай бұрын
Hi. I just bought Mogami 3104 and Canari 4S11 cables from a company called Markertek , they sell in bulk 18' and 20' respectively shipping was very fast, the only thing was the mogami diameter seemed to be not as big as what you show.. I could be wrong.. I paid total $149 free shipping..The most I've spent on "good cables" was about $400
@MrDallieros2 жыл бұрын
Just finished mine. Sounds amazing!!! The bass is so tight. Fantastic cable🙏
@jamesquinn27592 жыл бұрын
This cable mod doesn't change the sound quality.
@laiguilleetlefeu32403 жыл бұрын
I did this speaker cable out of curiosity. I owned an high end cable and was not convinced at first. I used KLEI bananas on mine. What the heck is this cable ? The differences are so huge i don't understand how it can be ! More details, more control, more depth, more air. I can't stop listening to my system now ! (Usher audio be-10, Sanders amps and preamp, innuos zenmini mk3 server, Burson reference DAC). Thanks for this video and advice !
@michaelboyce36193 жыл бұрын
Those are beautiful cables. Thanks for taking the time to do the video.
@michaelboyce36192 жыл бұрын
I just completed making a set of these cables and can tell the difference already. Thank you.
@Tharbamar2 жыл бұрын
Great choice.
@1968krug3 жыл бұрын
I just ordered some cable can’t wait!!
@vrgs138527 күн бұрын
Nice intro buddy! kinda made my day! Good heart and i subscribed instantly. Thanks for the great DIY video!
@Tharbamar27 күн бұрын
Thanks for the sub!
@karamoke13 жыл бұрын
The best cables i have heard in my life!
@boballard60403 жыл бұрын
Well done! I found the S411 cable on Performance Audio in Salt Lake, UT for $1.16 / ft. Free shipping during February.
@Tharbamar3 жыл бұрын
Very good seller.
@boballard60403 жыл бұрын
@@Tharbamar I completed making these cables and thank you for inspiring me with your video. This savings along with the time spent making them was pure fun!
@buckethead843 жыл бұрын
Your first video inspired me to go on a cable build, I originally had Mogami 3104s that I bought from a company that builds and sells them. I decided to give 4S11s a try instead. The Canares felt a bit more well rounded, bass was more defined, but I did find them to be a little more closed in and lacking that sparkle that the 3104s had. The major drawback with the 3104s, something that you've mentioned is the bass. The bass was real boomy and I found myself going back to the Canares for that reason. I read/heard some interesting information on the mogami 3103s as being more defined in bass but still having the same sonic signature as the 3104s. It didn't make any sense to me since it's the same cable as the 3104s just 50% less of it. Sure enough, using the same terminations as the Canares, I ran them with my system and the bass boominess was gone. The bass and overall presentation was like the Canares but more extended - it seemed like a sweet spot between the 4S11s and 3104s. I would encourage you to try them out, you might be surprised by the result.
@Tharbamar3 жыл бұрын
Thanks for the advice, I will try that in the future.
@luislunacortez19293 жыл бұрын
Well In my system 3103 (12 awg)the bass is tight that I can feel in the chest mids are ok but the highs are bright and forward maybe my speakers ( b&w from 1998) and not the cables. Im using canare 4s8 (13 awg) less bass better mids than 3103 but highs roll off. Next i ll try 4s11 (11 awg) coming on Friday . Another try could be the coaxial Mogami 3082 this is almost 14 awg
@buckethead843 жыл бұрын
@@luislunacortez1929 The 4S11s may be a good fit for your B&Ws, I had a pair prior to going with dynaudio excite x18s. I do regret not trying out the 4S11s with the B&Ws while I had them as the speakers to my ears had fatiguing/bright moments when paired with the 3104s. The x18s are quite neutral but I did find that the 4S11s took away the sparkle and made the presentation sound a bit narrow and dull. After struggling to tame brightness with the B&Ws I didn't expect to missing the top end extension, but fortunately with the x18s and 3103s I'm getting the best of both worlds. Good luck!
@luislunacortez19293 жыл бұрын
@@buckethead84 what model of B&W did you have?
@KitaristChannel2 жыл бұрын
Do you maybe have any experience with Mogami 3082 speaker cable? :)
@lezen1063 жыл бұрын
Never thought of doing my own but in fact this is very interesting and very well explained tutorial. Awesome.
@kkkkkttt45 Жыл бұрын
Great video! So great that I had to build a set of these cables for myself, and they came out great!! If you need some cables - do it.
@ramencurry66722 жыл бұрын
Canare cables are common in the audio and video industry. Netflix uses Canare cables behind the scenes. High quality cables
@luislunacortez19293 жыл бұрын
I think you have to pair together the red and red clear as positive and the white and withe clear as a negative to get the capacitance specified in the table , please see the 4s11 specs that was designed in that way to work . "Capacitance between twin red and twin white conductors" i think you have to redo your cables to work as intended but the maker. Happy New Year. Please let me know if I'm right.
@Tharbamar3 жыл бұрын
Yes I did notice that, this is my more than 10th pair of 4S11 speaker cables I made, I tried different paring and there is no difference in sound, happy new year!
@luislunacortez19293 жыл бұрын
@@Tharbamar ok Happy New Year
@pagepro2113 жыл бұрын
I think somebody F@cked up and trying to recover from their mistake with an excuse. I'm pretty sure Tharbamar never mentioned that there was no difference in sound in previous videos. If Canare says do it a certain way why would an "audiophile" do it differently... just saying
@luislunacortez19293 жыл бұрын
@@pagepro211 if you see the video there are post over the video saying that.
@pagepro2113 жыл бұрын
@@luislunacortez1929 I know, I watched the whole video. I specifically was talking about his previous videos on making wires... but by that time he realized the mistake after this video was made he didn't want to redo the whole video and wires, that's why he put the banner on the video edited in post saying what he said. The previous videos of him making wires NEVER said Canare suggest to do it a certain way which is the right way. Thank God you gave us the right info. How can I honestly trust his reviews on speakers/amps, etc anything in his home audio, even the sound sample at the end of these videos, if his wiring is off and he knows it's off but doesn't think it matters. I read the video banner but didn't think much of it BUT after you made it clear that what he did was flawed then I really understood what was going on.. kudos to you.
@hifirec53373 жыл бұрын
Congratulations on the quality of the work and the test with grace mahya
@dietere.puchta96883 жыл бұрын
Happy new year! Thank you very much for another interesting and entertaining "how to" video. You did animate me with all your videos to start to make my own cables, too.
@MNimsy2 жыл бұрын
Your video was inspiration for me and I also assembled this cable. Thank you!
@RanTausi3 жыл бұрын
Happy new year 2021 to you and your family , thanks for the blessing.
@Tharbamar3 жыл бұрын
Happy new year!
@NaumHN3 жыл бұрын
I used viborg bananas (rhodium version) on duelund cable. When I took them off and tied the bare wire the sound quality improved drastically. It's like someone took off 10 curtains.
@sergeymorozov45893 жыл бұрын
+
@user-uz3pi6es1g3 жыл бұрын
Watched almost all your video and learned lots of professional acknowledgment from you! Love your video and just bought SX11 too! Hope I can get the cable as I need it to plug into SX11 and Quad S2! I am happy to pay for the Fedex or DHL courier! I am in Singapore!Thanks lot!
@steveo41413 жыл бұрын
Nice job on the cables...don't know if sound demo really does much as it only demos sound quality of the device the person is watching the video on... nice set up though... cheers 😎👍
@lloll693 жыл бұрын
excellent video and choice. everyone should really at least have a pair of this cable. despite long burn in.. it makes music sounds like music and only a few cable does that
@ttownscott3 жыл бұрын
Thanks for putting links to everything
@Syyy833 жыл бұрын
Happy new year.... great work there. You just sawed me couple of bucks cause i wanted to order Mogami 3103 and this one is much affordable 👍
@Tharbamar3 жыл бұрын
Happy new year!
@AbideinChristFully Жыл бұрын
My 3/4" heat shrink I bought from the link is way larger than what you have there. I need to order a different size. (1/2") Edit: I went for it. Need cables now. It does work, but after all the heat, I melted the mylar. My favorite part has been the most trouble. You might want to correct your link, and warn of not only melting mylar, but it frays if you don't know what your doing, putting it on. I figured it out, but as they say...practice first. I didn't.
@Hondaguru11223 жыл бұрын
Happy new year buddy. Many many more!
@Tharbamar3 жыл бұрын
Happy new year!
@Hondaguru11223 жыл бұрын
@@Tharbamar thank you! Your videos are the best, and have served me great in my DIY cables 😎
@jpwheeilng20003 жыл бұрын
Awesome Builds, thanks for Sharing. I've always thought to Build my Own Speaker cable, saving me Thousands, your Video's help us out, not so Hard After All. I'm still Learning my Yamaha RX- A2030 the Reason I bought this, was I still have S-Video Connections in my system. I have a Laser Player, yep the old Digital Movie format that Started it all , I haven't thrown out any of those Movie's and my Super VHS Player, yep still have and the movies to go along with. I wish these Stereo Component companies didn't throw away these connections, they did, making us buy New Equipment and making us consider throwing out our old movies. I also still have my tape recorder, excellent Reviews, a pretty nice recorder. Your System is pretty impressive the Cable's sounded really good, thanks for sharing
@renatogomes23962 жыл бұрын
Great video. Hint: you could sand the wire part that go inside (400 sanding paper) before mounting into the banana plugs. This would help unleash the copper pure properties. You should wear gloves to avoid adding skin material to the copper. Skin material can damage the copper over time. Installing cables is the most critical part of the cable assembly.
@saedamad3 жыл бұрын
Good afternoon and Happy New Year from Singapore
@Tharbamar3 жыл бұрын
Happy New Year.
@BFArch0n Жыл бұрын
Love that shimmering techflex, can't find it anywhere. The hollow plugs are interesting looking too.
@Tharbamar Жыл бұрын
Links in video description for it, thanks
@BFArch0n Жыл бұрын
@@Tharbamar That links to silver, looks very different.....I bought a bunch on ebay that looks like it might be similar, just waiting on shipping. :)
@bjarnvik2 жыл бұрын
Great guide as always. Thank you!
@philhaha42433 жыл бұрын
Thanks for posting this video nice work...was on amazon right away get the parts needed to make my own...thank you...🥇⭐️
@stevelucchini87 Жыл бұрын
Congrats on another great video. Just wondering why no one has mentioned the Canare 4S11 and it’s much better PE insulation around the conductors themselves (which add to a better sound) with PVC as the outer jacket. The Mogami cables have PVC as insulation on the wire and also the outer jacket which is a lower grade speaker cable for that matter. It’s all about the insulation around the speaker, conductors themselves.
@robertkeefer15523 жыл бұрын
I have the Canare 4S11 cable bi wired to my speakers. I agree that it is an excellent speaker cable.
@brendanmann3273 Жыл бұрын
Great work my brother from another country! What size shrink wrap goes over the banana plug? BTW - your DYI tutorials are excellent. Please do more. What is the national dish of your country? Adobo?
@andredevries49873 жыл бұрын
Happy nes Year for you and your family too.
@Tharbamar3 жыл бұрын
Thanks so much
@alfredoltinocol3 жыл бұрын
Thanks! I used your original video to make my own cables!
@Tharbamar3 жыл бұрын
Great!
@kixxoff9283 жыл бұрын
Hey, nice video! I've watched one of your videos where you were DYI'ing a Mogami cable. Apparently 4S11 are significantly cheaper, yet still perform great. Am I missing something?
@ALLANNOSTROMO6 ай бұрын
Hello Thanks for your videos. I tried your Diy budget Mogami. I'm satisfied. My question is what is better Canare or Mogami?
@Tharbamar6 ай бұрын
I use all of them depending on what I’m paring with, so far W3082 is my favorite of all, thanks
@ambrepallier33203 жыл бұрын
BONNE ANNÉE 2021 SUPERBE VIDÉO MERCI BEAUCOUP
@Tharbamar3 жыл бұрын
BONNE ANNÉE
@jackburton16745 ай бұрын
Excellent video! To my surprise I see you using jumper plates between your binding posts. Haven't seen one person say to use those, usually it's"never use them" and use wire jumpers or bi-wire. Did those come stock with the speakers or are those a specialty purchase? Keep up the good work!
@LeoRousseau3 жыл бұрын
New subscriber here. I just wanted to say hello and I'm looking forward to seeing your videos. Thanks for your efforts!
@zogzog10633 жыл бұрын
Love the cables and love the amp.
@grandpadre88113 жыл бұрын
Thank you very much for the tutorial.
@Tharbamar3 жыл бұрын
You are welcome!
@quitegenius3 жыл бұрын
Superb! Appreciate your work.
@dougmurray7684 Жыл бұрын
Your audio recording equipment sounds fabulous. As opposed to using Mylar or Nylon when joining the conductors, can you not use heat shrink tubing?
@Tharbamar Жыл бұрын
Yes you could.
@jackvanderwerf12942 жыл бұрын
Maybe it's been covered, but have you noticed a burn-in time for these Canare's? I just put together a 2nd system (which was the same as my original 1st tube hybrid system) and I remember it as a kind of a tubey sound back then. 20+ yrs later, I've revisited that system with the Canare 4S11. I was surprised to not be hearing the tubiness that I remembered (now I'm also using better interconnects), but with the new Canare's, initially, I'm hearing a much wider soundstage. I've read of a 200 - 400 hr burn-in for these to really sing. In your experience, are there ranges of frequancies that improve with burn-in? Mogami vs Canare, dependent on or favor SS over tube? Good Work~
@Tharbamar2 жыл бұрын
It should settle in about two weeks, thanks
@drwatson32bit Жыл бұрын
@@Tharbamar what is physically happening with the conductors during burn in? My instinct is to dismiss the notion of it, but I learn new things all the time
@pegun3 жыл бұрын
Love the video, thanks and Happy New Year!
@Tharbamar3 жыл бұрын
Same to you!
@ii18252 жыл бұрын
Have you looked at Gr Research tube connectors? Very similar to your ends on the cable but does not use the standard 5 way binding posts on the speaker. Uses a very simple interface at the speaker.
@Tharbamar2 жыл бұрын
I will check them out in the future, Thanks
@guzzomean3 жыл бұрын
What do you mean by speaker cable not burn in yet? Is there any difference in sound whether a cable has been burned in or not?
@Tharbamar3 жыл бұрын
It will be a bit more clearer after burn in.
@erichill53283 жыл бұрын
I was wondering is soldering better than those screw down terminals? I would think that the high heat from soldering could possibly damage the copper cable so maybe the terminals would be better.
@ericmiller2543 жыл бұрын
Raw is in theory best but you can short out your amp if you cross wires...... I don't mind with my gear. But if you have expensive gear.....Probably best to keep those connections clean as you can.
@goofyfandango13123 жыл бұрын
Awesome! I love these vids.
@Tharbamar3 жыл бұрын
Glad to hear it!
@virimpact Жыл бұрын
@tharbamar excellent videos on making your own speaker and RCA cables.....keep up the amazing videos. QUESTION: seems like the Viborg Plugs are no longer available, **What other plugs would you recommend and share the link? and are there any 90-degree plugs you recommend for behind the amp inside a cabinet?
@Tharbamar Жыл бұрын
Hi, I have no experience of using 90 degree plugs, you can get Viborg plugs here. Thanks amzn.to/3W5ro0x
@aleksanderp.43732 жыл бұрын
Another fun and enjoyable video @Tharbamar, keep it up! Cant believe all the hate in the comments, good golly.. A question regarding Diamond 225, im still pursuing making them sound their best. I have done the spacer mod and replaced the jumpers with a 14awg cable, both helped with clarity a little bit, as i find the Diamonds 225 are not by nature amazingly speedy/clear, but have a lush and weighty body that i enjoy. What wire than do you think for Diamonds, Canare 4s11 or Mogami 3103? Really appreciate your view since you have a lot of experience with all of these. Greets from Sweden!
@Tharbamar2 жыл бұрын
Yes you are right D225 has limitations, I would suggest to go Mogami W3103 which should deliver a bit more clarity with them, thanks
@aleksanderp.43732 жыл бұрын
@@Tharbamar Thanks! Do you mean airyness up top, or bass definition? Because you say Canare strings really help with bass?
@Tharbamar2 жыл бұрын
It will depends on paring components, I like the bass of 4s11 a bit more in my set up.
@aleksanderp.43732 жыл бұрын
@@Tharbamar Thanks again, i guess its worth testing out. I even heard good things about some Belden cables. Have just replaced RCAs with them and it sounds promissing.
@drwatson32bit6 ай бұрын
One thing I keep thinking about- how would the screw-on banana plug collars add resistance to the cable? It doesn't make sense but I'm certainly open to the fact that I'm totally missing something
@giangvu79023 жыл бұрын
Will you be doing a review for the iFi DAC? It looks very interesting. Thanks for the video and happy new year!
@Tharbamar3 жыл бұрын
It should be up next week, thanks
@itsGnTO3 жыл бұрын
Happy New Year I enjoy all of your videos. Last week I made my own speaker cables 4 x 3 meter lengths using Canare 4S11 cables and Nakamichi plugs. My question how long does burn in take? I live the new cables.
@Tharbamar3 жыл бұрын
Only takes 3-4 days depending on usage, thanks
@itsGnTO3 жыл бұрын
@@Tharbamar thank you.....
@piotrk.70733 жыл бұрын
Happy New Year!🤩 I like video like this. Thank You. I need to ask: What is Your favorite, reference speakers at the moment?😀
@Tharbamar3 жыл бұрын
I’m using custom designed cables at this moment, thanks
@piotrk.70733 жыл бұрын
@@Tharbamar yes I know but what's about Your reference speakers? (permanently)🤔😀
@mariusalexe76196 ай бұрын
Thanks a lot for sharing this with us, this is such a money saver! Can you also recommend a good quality cable for subwoofers? Can I use this? Big thanks in advance!
@donnienathan78213 жыл бұрын
I followed your links here and bought all the stuff to make them. I’m not a huge believer that the sound quality will be any different, but i guess I’ll find out for myself soon ! Nonetheless, they are great lookin cables so I’m happy already =)
@Tharbamar3 жыл бұрын
Have fun, Thanks
@kyawlinnmaung51273 жыл бұрын
Very useful video. Cheers! Bro 👍
@neonspecter27303 жыл бұрын
I've been considering the 4s11 for a long time, but yesterday I finally decided to opt for the Belden 5T00UP 10 Gauge from Bluejeans. Have you heard the Belden or can you offer any comparisons?
@jaranjaran95378 ай бұрын
❤❤❤❤❤
@gamecock24653 жыл бұрын
I’m looking into this trying to decide if I should use 10awg or 4S11 not much on YT concerning that topic but nevertheless beautiful cables you have made there.
@johnsweda29993 жыл бұрын
Is it solid core or multi Strand cable. Not really making your own cable not sure what the difference is what you're doing. I wouldn't wind the cable twist it keep it straight you only wind the Neutral and positive at a 45-degree off angle but winding the strands like that at the end is causing it to increase its inductance. And when putting your shrink wrap make sure it's not tight you need movement in the cable putting the cap on on the banana plug is not going to add resistance. Happy New Year
@marjanbjelajac511911 ай бұрын
Hello, the Canare 4S11 on the video is a quad star cable construction if I understand correctly. When making the cable, why did you connect adjacent wires, i.e. red and white for one pole, instead of connecting red and light red for the + pole and white and light white for the minus pole? Isn't that the wrong connection for the quad star cable construction? With the connection 1-3 and 2-4, the property of the EMI /RF protection construction and the advantage of the quad star construction is not lost if I understand correctly. Can you explain to me if I made a mistake somewhere or if misunderstood cable manufacturer ? I can confirm that on my system the quad star connection 1-3 and 2-4 sounds totally different (dynamic, spacious, richer) than the 1-2 and 3-4 connections. Thank you
@Tharbamar11 ай бұрын
Hi, thanks for the comment, I’ve been using 4S11 cable for almost 20 years, it doesn’t matter how you connect them there is no difference in sound quality, I have shared and shown to many audio people with blind demos and no one has ever heard the differences, thanks
@marjanbjelajac511911 ай бұрын
Thanks for the prompt reply. I try all the combinations and each one gives me a different result. Yes, the combination of 1-2 and 3-4 is somehow calmer, star quad 1-3, 2-4 is dynamic and powerful, wider space, and bi wiring is some kind direct. Therefore, different connections give different capacitance according to the manufacturer's website. It is NOT possible to get the same sound in every connection.. Also, if the cables are not connected in a star quad scheme, then the EMI / RF protection does not work if that means the same to you. Either way for some reason you don't hear the difference or I have a problem in my system that causes the sound to change. My speakers are Canton ERGO 695DC 2x300W at 4ohm. and Primare I35 Prisma. Do you have any advice? @@Tharbamar
@ktchang71233 жыл бұрын
Why you are not using speaker wire pants? They look great!
@Tharbamar3 жыл бұрын
I'm not a fan of Y pants, thanks
@blacksea61243 жыл бұрын
hello i am watching your videos with your liking i need your speaker wiring advice Are soft balanced musical vocals suitable for canere 4s11 for clear clean presentation or would you recommend another cable stay healthy
@bingster-2232 жыл бұрын
Both of your speaker cable making videos are great. I haven't decided which variety I'm going to make I'm leaning towards the Mogami wire but if the Canare is significantly less expensive I'll be happy to use it. Any suggestions for cable for surround speaker cable with longer lengths?
@Tharbamar2 жыл бұрын
Canare is better buy. Thanks
@bingster-2232 жыл бұрын
@@Tharbamar thanks
@robertstambulovski2 ай бұрын
Compared the canary s411 with some wireworld $2000 cable ' couldn't hear any difference ' maybe that's just me?
@fredericoliveira63843 жыл бұрын
Thanks so much Tabhamar for your clear and honest explainations, i always enjoy see your vidéos, and most of the time i'm agree with you for the hifi component choice you make. 👏👏😉
@sleepyf12 жыл бұрын
Referring to not using the outter housing of the banana plugs, what do you mean by resistance? Are you referring to cable flexibility or conductor resistance? Thanks for the tutorial by the way. I found a local Canare seller and am almost finished my first cable.
@Tharbamar2 жыл бұрын
Cable resistance, I just don’t want to have more metal on where the current flow through, thanks
@marcg.7850 Жыл бұрын
i don't get it. He twists a red and white together, so how do you identify that exact par at the other end? Why not combine whites together as well as the reds? You'd have to do that if making a bi-wire set, no?
@Tharbamar Жыл бұрын
Actually semi transparent, white, pinkish red and red, it won’t be mistaken but you can pair them as you wish.
@bigambientdeath Жыл бұрын
Can anyone explain without being too technical, if this cable sounds better than generic 10 awg ofc copper & why that might be?
@TheSanggarra2 жыл бұрын
Am I hearing you right? You like these better than your Mogami DIY speaker cables? 😁 Is there a reason you don't bi-wire them?
@Tharbamar2 жыл бұрын
Yes I like these more than any cables I tried, there is no benefit from Bi-wiring but I do bi-amping.
@theredon23 жыл бұрын
I have the same cables same terminals brand but spades blue jeans cables are great.
@GSP-763 жыл бұрын
Great video... although i think using wire pants on the ends would have looked nicer...still great job though!
@Tharbamar3 жыл бұрын
I’m not a fan of Y pants, thanks
@rochdiouakzni7922 Жыл бұрын
Bonjour, Merci pour cette vidéo intéressante. Quel modèle je dois utiliser pour mes Focal aria 926 : Canare 4S8 ou canare 4S11 La longueur du câble est de 1.75 mètre
@Tharbamar Жыл бұрын
Hi I will have to choose 4S11 personal, thanks
@shaileshjohar55343 жыл бұрын
Very informative videos. Have you tried the Heat shrink tubes with glue? If so, how did you find them, are they easy to slide?