Making homemade car lift

[@sharkyshark1]

I think I would add some cross bars between the two sides so cars would wobble far less when being raised up

[@TychoVan]

this man could build a woking spaceship and open the videio with "in this video I will show you how you can make this at home"

[@Ayankainak]

A

[@RL-ru2st]

it will be a bit risky without lock as hydric fluid may leak

[@mrshaneyt43]

Very interesting. I’m sure this is a great help in your workshop. Always nice not having to lay on the floor to work under a vehicle 👍

[@javieralvarez9146]

👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻

[@aryapourmansour]

So Cool! Nice

[@aacar4095]

Very cool and excellent job. The thing I like about the quick jacks though is you can get under the middle of the car. The type of scissor jacks in this video block all that. Still excellent job.

[@notadoctor2598]

+1

[@brynlonsdale7052]

A couple planks of wood would fix that somewhat

[@DktheWelder]

That is very cool nicely built

[@johnimacaroni76]

You made a car from Cyberpunk, Buggy from GTA, a Gyro from Rust... Have you considered making a vehicle from 7 Days to Die? Like the Motorcycle?

[@DisillusionedMillennial]

Dont give them any ideas. They still habe not finished the cyberpunk car.....its been going for years and they keep starting new projects instead of finishing that one.

[@krejziks3398]

@@DisillusionedMillennial that's what it means doing work from a hobby without a deadline... You work on it, when you feel like it.

[@Abrikozenjam.]

Cool stuff

[@paulhealey2984]

I'll knock this up on my day off next week.

[@ryanhamil1530]

I make actual lifts for a living and all of them have redundant safty locks because hydraulics fail every day it's just a matter of time before you blow a hose or seal and loose your legs. Good luck! Ps you could of bought one of these used for 600 dollars

[@RusThompson]

$600 ? Where? I'll buy one tomorrow

[@iTs_Turbine_Time_in_Turbonia]

Where can I buy a hydraulic car scissor lift for $600?

[@RusThompson]

@@iTs_Turbine_Time_in_Turbonia Good question, Harbor freight had low or mid lift for 600 of course until I started looking for one.

[@iTs_Turbine_Time_in_Turbonia]

​@@RusThompson You have any idea where i should start searching?

[@RusThompson]

@@iTs_Turbine_Time_in_Turbonia Harbour Freight is ready to start selling them again.

[@alanprado6210]

so basically each cillinder has to have a load capacity of 4x the vehicle weight?

[@denimory]

it would seem that cylinders need repair as they cant lift 1.5t car,probably needs new sets of seals

[@alanprado6210]

@@denimory or maybe the pump isn't strong enough to supply enough oil to lift that weight

[@toyotahavehorspower4003]

Man deseves more subs

[@possibleproblem479]

Yall should make a homemade car on the homemade car lift

[@shvonkle]

He's already building a car from cyberpunk 2077

[@toyotahavehorspower4003]

@@shvonkle but not on this lift but maby in another vid

[@shvonkle]

Maybe he built the lift because He needed it for the next quadra Video. You should totally check it out, its so awesome

[@digitaLm0nk]

Diy! If you have welder ...grinder.... workshop.... good vid either way

[@DSperformance96]

If you don't have those, you probably don't need a lift right?

[@Skyx5m50]

I own a BMW and my wife owns a 300. I needed to make one of these because I’m always working on the cars. It has been helpful and has made everything easier. If you know how to weld you can make anything.

[@554drago]

Definitely gonna sample this video but if I were you I’d put some more heat into those welds

[@dustinwestglow]

dude this is CRAZY

[@Jack_Hurst_]

The waight limit is because the material and shape or because of the pumps capability? Or could you just add 2 more pistons to have 2x the lifting capacity

[@launchbreak]

It can be either because of the material, or because of the motor creating the pressure within the pump. Theoretically, with the infinitely strong material, only the motor power would need to increase in order to lift a heavier car.

[@dannymoneywell]

Seems dangerous, especially with the 4 tacks on the reinforcements, i'd never get under that and also that won't hold a lot of cars due to how inflexible it is regarding the support points.

[@barenekid9695]

Aware that the commercial version of this runs ~1600$.... complete with Safeties and remote pump?

[@Odinakafx2]

If u can build any concept car from scratch that will be grate please

[@DSperformance96]

Can we have plans for this? Might want to build one and add some things to it.

[@surfguy4u]

needs a seperate lift lock. under engineered for weight load or any safety margin.good copy of existing lifts on market. Have to agree with Trevorjarvis just not safe at all to get under it.

[@trevorjarvis3050]

They’re gonna die if they get under a car on that thing!

[@tomiikp483]

Hello, could we somehow agree on the drawings or more detailed dimensions of the jack, I am looking for some detailed dimensions and I really like your work. Thank you in advance for your reply.

[@LightGesture]

That got complicated real quick once you got into an engine with hydraulics....lol

[@mr.grotto]

Did I just see spot welds holding the bottom of that scissor jack? Oh thank god they were just holding it in place to test.

[@kerashastreet5691]

Жаль на русском так и не выпустил видос, в твоей озвучке по-приятнее и более понятно. Ну что, придется сначала смотреть, потом по кадрам раскидывать, чтобы позаимствовать некоторые решения) 2 года собираюсь начать делать свой подъемник)

[@niklaskhathutshelo]

Imma build this on a car trailer, mobile mechanic❤🤗😊

[@nak_attak]

why christmas music? in july?

[@GTX3570]

What the size of the pistons?

[@revemb4653]

thats super dangerous though

[@jeremyr7147]

Man that was a lot of work 👍👋🇷🇺

[@olivergrandbois2937]

J'aime ce système 🇨🇦

[@youruberdriver3027]

Go back to Quebec jesus christ

[@georgetossi6008]

what about safety locks so it doesn't fall on you when yo are under it

[@jagboy69]

You couldn't pay me to get under that!

[@richardwright5316]

Why don't you publish some plans and sell them. I'll buy a set for sure.

[@Odinakafx2]

Please we need home made car from scratch

[@toyotahavehorspower4003]

What abot The Qurdra vtech hi made

[@Odinakafx2]

Let see

[@adrianorogo]

hare el mío, muchas gracias

[@АлександрФунтик-ц4з]

КРУТО!!!!!!!!!!!!!!!!!!!!

[@javieralvarez9146]

👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻

[@onewithGod4life03]

Second!!!! 😆

[@daniellemeeks3862]

You didn't clean your metal, you were welding.

[@ThomasTabak]

can in have the plans ?.

[@gj3478]

Почему на видео Жигули, а речь на английском?))

[@DisillusionedMillennial]

Are you ever going to get back to making the quatra vetch? Its getting annoying how you are starting and finishing new projects before that one is finished!!

[@swatcat7928]

No safety locks......

[@kjhnsn7296]

A crushed cockroach comes to mind....😬

[@aladdincafe9699]

Homemade 😂

[@WDRS79]

great attempt at a video but cant stand the choppy generated voice over. rather listen to a real person with an accent than this

[@sunyun4425]

Can you convert this video to inches and feet and pounds?

[@darkcnight]

xi jin ping winnie the pooh

[@petrus0002]

homemade?....:)

[@ВиталийХвесько]

Стрёмный какой-то подъёмник🤔

[@valerabarsov]

it is immediately clear that the Russian person

[@TeezerDriz]

Annoying music, these videos do not need any music. Make the thing and talk about it, simples.

[@arsamakkhamkhoev258]

Почему русско язычного е Нету видоса

[@Серёга372]

всё продали , всё для питухов

[@ДмитрийНикишов-р2и]

Еееее Ваз 2111

[@fix0071]

чем бы дитя не тешилось, абы не плакало!

[@GeorgeAlex-j6k]

Nope. Don't try that at home kids.

[@oblinacavanaugh4544]

Ffs!!!! 😒 You tell us that you made a video to show how to build the lift. But NO partslist or blueprint.

[@FlameBlue9016]

The guy can make his own lift but can’t voice his own video….. come on bro….. AI voices suck it’s lazy.

[@trekgod3]

Soon as I heard that awful AI narration, voice thumbs down and scrolled away

[@angelfa1804]

@MundoJeep

[@DktheWelder]

That is very cool nicely built