Making Hydraulic & Hydrostatic Dump Truck

In this video we will show you how to make an interesting vehicle that will be very helpful on the farm and around the house.
You might say it was easier to use a lawn tractor and convert it, maybe it was, but we didn't have one and we had a lot of parts we wanted to use.
Parts we used:
- Hydrostatic transmission from a lawn tractor
- The main frame is made of a 70x50x3 mm channel
- The steering gear was found in a scrapyard, unfortunately I don't know what car it came from.
- Briggs & Stratton petrol engine 14 HP
- The seat is from some lawn tractor
- The footrests, sides and crate are made of 1.5 mm stainless steel
- Fuel tank from the gx200 engine
- The air conditioning compressor is probably from a Ford
- Hydraulic pump with a capacity of 10L / min
- Hydraulic cylinder with a height of 200 mm
Specifications are:
Weight approx. 250 kg
Load capacity on the trailer: approx. 400 kg
Power 14 km
Maximum speed 15 km/h
The dimensions of the box are 90 x 96 x 40 cm
Check out our other videos:
• Making revers trike to... - Making reverse trike to Have Fun :D
• Making Hybrid Stump Gr... - Making Hybrid Stump Grinder
• Making 14 Hp Brush Mow... - Making 14 Hp Brush Mower - using Lawn Mower parts

[@nine_lives5597]

cannibalizing the AC compressor to use as a clutch for the hydraulic pump was a stroke of genius, very well done

[@garymonsarratt6048]

NICE JOB...................

[@geraldsundberg3610]

A nice build and a useful machine.

[@markevans4645]

Very impressive skills! Wish I had the equipment you have.

[@tattooedredheadx]

Protect this man at all costs, we need him in the coming apocalypse.

[@DanKoning777]

Wouldn't it be wiser to seek/know how to avoid being here for what you've rightly said IS coming [tribulation/apocalypse]? Sadly, most reject the truth/answer when they hear it because it's inconvenient to their lifestyle. If people only knew how bad it's going to be [globally] for those who reject the answer: To be right with God; Jesus-by grace thru faith *apart from* human effort: good works, rites, ceremony [Eph 2v8-9; Gal 2v16/3v10/5v4; Rom 3v20]. *"Truth is a stubborn thing"* "For then *there will be a great tribulation,* such as has not occurred since the beginning of the world until now, nor ever will" [Matt 24 v21]

[@olens.6987]

"for those who reject the answer" Didn't God say that this would be how it is in the end?😫

[@lesd40]

You're a great fabricator...always a pleasure to watch!

[@MadeinPolandChannel]

Thanks! 👍

[@josepharagon8259]

You should start production… AMAZING INGENUITY…!!!!!!!😮❤😮

[@chazholder8365]

​@@MadeinPolandChannelqqq

[@ambermason5056]

Nice build

[@edwardstephens247]

Outstanding job and design.

[@piconano]

It's always a pleasure watching a master fabricator build stuff.

[@user-ce7tj5rg3i]

Молодец мужик рукастый !

[@parttimetourist]

True Professional and I couldn't stop watching this magician from start to finish and I hope he is self employed because he is too good to waste on someone else

[@mrphotographer3665]

Dude you are amazing

[@user-st3fo5hc3p]

Молодец. Хорошая машина получилась.

[@willtricks9432]

Great work from a busy man. Thanks.

[@donteague614]

Very impressive!

[@Leroys_Stuff]

I enjoy watching and guessing what you may do makes it fun. Excellent work

[@alanbanks9677]

Well done great idea.

[@Manufacturingsite1]

Hello everyone have a nice day this is the amazing video

[@dimitar4y]

10/10 on the reparability though. There's not a SINGLE inaccessible void, other than the obvious hydraulic oil tank.

[@FCFDave]

Very nice build and video, thanks.

[@iraklisseva2123]

μπράβο σου φίλε πολύ ωραία κατασκευή χρειάζεται σε κάθε είδους δουλειά σου εύχομαι ότι καλύτερο ευχαριστώ για το βιντεάκι 😊😊😊😊

[@eugenr]

Хорошая работа!

[@DanTheMan0695]

EXCELLENT idea with the AC compressor clutch. Keep it on the same belt, flip a switch and you have PTO. Love it.

[@DarrellFLops]

good builder very talented keep going we love this stuff

[@rjung_ch]

Thanks, just great! 👍💪✌

[@jimsmirh2406]

That’s a slick little contraption you have there.

[@SharkyMoto]

i'm here since you only had an angle grinder and a stick welder, impressive how far you have come.

[@MadeinPolandChannel]

thanks for being our viewer for so many years!

[@doylerabjohn3435]

That's a excellent built. Something I could definitely use.

[@tonysargent1699]

Cool new addition to the work toys. Thankyou for sharing with us. 😀

[@trucks_channel_razborgruz]

*GREAT JOB! GOOD LUCK TO ALL* 😎

[@kaboom4679]

Another mechanical masterpiece .

[@daniellebon9224]

Bonjour belle réalisation avec de l’a récupérations de pièces automobiles et très bien équipé dans l’atelier 👍

[@didierlucas9653]

Nice smal dump truck . Great job . 👍👍👏

[@HuggieDuggie]

Absolutely brilliant - well thought out and skillfully executed

[@pawelaco]

Idealny sprzęcik w gospodarstwie, piękna maszyna. Pozdrowionka

[@thierrybosc2700]

Quel travail. Bravo c’est vraiment super. Merci pour cette vidéo.

[@nonconformist4208]

Pracowite i zdolne to chłopczysko z Podkarpacia , a propos najbardziej podoba mi się ta piła do cięcia , chyba sobie taką kupię do krajania mojej swojskiej suszonej kiełbasy 👍👍👍👍👍👍👍👍

[@metelgodful]

Awesome job and a good job on the paint too I like the color cool dump truck so I take it you're a machinist by trade because you look like you know what you're doing awesome video hope to see more of your builds

[@MW-qv7ph]

Patrz jaki pomysłowy Dobromir!

[@mrmikerc1]

I love that work excellent excellent work thanks for sharing your video look forward to the next one and I love your welding

[@MateuszDoniec]

Jak zwykle kawał dobrej roboty 💪

[@MadeinPolandChannel]

Podziękował 👍😁

[@shawngrabowski988]

VERY NICE WORK MAN!!!!!!!👍👍👍👍👍👍👍👍👍👍

[@mattrzewnicki6343]

Heck yeah! I'd definitely watch more!

[@scapriglione8642]

This might be my favorite build of yours yet! Such a practical and useful creation. Always a big treat when you post a new video!

[@jana171]

Great build... you could go bigger in size and make an industrial version of this... SO cool !

[@stevepiechock9234]

The thing I like the most about your channel is the advanced thinking you constantly put forward. While the rest of the planet is busy destroying itself, you are busy engineering and making positive contributions. I hope you last forever!

[@JH-ve6tx]

Retrofitting an old AC clutch to your hydraulic pump was really done!

[@nathkrupa3463]

Great work my master you are awesome engineer thanks for the sharing this video sir 👍 😊❤😊❤❤

[@gucfa3087]

O Stary, jesteś genialny! Z chęcią bym u Ciebie pobierał nauki i pracował. Bardzo zazdroszczę (w pozytywnym tego słowa znaczeniu) wiedzy, umiejętności i precyzji wykonywanych rzeczy. Mega szacun!

[@quantumleap359]

Excellent skills, very useful vehicle. Good job!

[@renegade1520]

Great job!

[@markmaraman8858]

Really nice work

[@bymarcatholictinkering]

Very talented indeed. It amazes me how you seem to be building this project as if you were simply painting by numbers 1234567 and so on. The detail steps in each phase of the build are truly inspired by a higher power, you are blessed.

[@user-pr8fc3oc1k]

Ксассно мастер на все руки дар от Бога так держать 💪 лайк и подписка 👍

[@jimsvideos7201]

Time well spent. There can't be much to go wrong with this either and anything that does can be fixed easily enough.

[@jchrzaniuk]

Silnik z połowy Malucha ;)

[@christophbendau1866]

Też tak umiesz, ty połowa mózgu ?

[@BEDavisBrown]

Love the build 👍, this looks like the projects on those small tractor forums where owners will add a backhoe or front end loader to their garden tractors.

[@MrCubflyer]

Really good you are talented.

[@521farmer]

Howdie from Canada 🇨🇦 Sk thinking about how you built this awesome workmanship for what ya do and build thank you for sharing with us this is worth watching ya got this something that can be used and easy to make don't have to be a rocket scientist to be able to do this later mighty fine 😊

[@elmahdielmahdi6895]

It's very interesting. I can't believe this thing😄 walks with such power, relying on a belt

[@MitzvosGolem1]

These hydrostatic transmission need larger oil capacity a external filter. For heavy work. Many failed here in mountain lawn mowers. Axels can't carry much weight also. Excellent channel 👍 My grandparents from Poland Lithuania.

[@dodgeme1986truck]

I agree even on relatively flat land any transaxle smaller than a Tuff torque k66 just won't last on slopes... Also most transaxles under 1inch axle shaft cannot hold much weight... Best bet is to use transaxle as a transmission with a separate load bearing axle with hubs chain driven from transaxle shafts with a 1.5:1 or 2:1 chain ratio driving the rear wheels

[@natereinhold6180]

It doesn't help that the box stores spec 30w motor oil in the TTs (my homedepot cub's manual states 30w). TT specs 50w in their service manuals. Built in failures. Only buy the mowers from the dealers. They are made in the same factory but built to different specs for the different distributors. You want a JD, go to JD for it, not the box stores.

[@2Truth4Liberty]

I can only use mine for about 1 hour and then must have a long "cool down" wait for the hot - or else - change out the hot fluid with fresh cold fluid.

[@dodgeme1986truck]

@@2Truth4Liberty yup I replace the K44/46/48 and smaller with the k66 as a standard procedure for all my lawn equipment once it starts slipping and I avoid the k51... Those k7x are looking pretty beefy though just hard to find for a decent price the k66 is easily rebuild able and much more durable and can be found with differential lockers all the way back to the early simplicity conquest tractors (one version with it is the 1694014 conquest) just rebuilt mine after 600hrs of hard use still operated just fine... just had the case apart already as it took 1 too many dunks in the mud and had a bad input seal from 6ft tall field grass wrapping up on the input shaft

[@MitzvosGolem1]

@@2Truth4Liberty I would put a cooler on oil somehow . Very poor design on these . I own operate heavy equipment machines and all have coolers .

[@tedbastwock3810]

Love all your projects, especially your vehicles!! I learned a lot from watching your projects. This one is amazing, thanks for sharing with us!!! How about showing us how to make a 4WD vehicle 😎🙏

[@michaelthrapp8790]

That's awesome homemade utility vehicle

[@NTconstruction]

Amazing machine and craftsmanship!

[@mead6754]

you mate are one talented guy, Top Class

[@valentin.saniuta.po-derevenski]

Хорошо получилось! Ты настоящий мастер!

[@billmullins6833]

Impressive! Very impressive! Such skill in fabrication.

[@BranjuPuma-ch3rp]

Amazing talent he have and shareing his idea to everyone how we can make it such . Impossible thing to possible. 🥰🥰🥰

[@robsdeviceunknown]

You and your genius have single handedly made me take back all the pollock jokes I ever made. Dangit lol.

[@user-dn8pz9mv9s]

Молодец, Всё аккуратно.

[@Bunk599]

As always....well made clever design,👍

[@ianmckay1780]

Yet another masterpiece of engineering. You always make something that is not clear from the beginning, but as the build grows, everything comes together as one perfect example of what can be done with a little forethought and some considerable skill. Thanks for teaching us what can be done, Much appreciated video, helps add to inspire ideas for the future. From UK.

[@MrJamesspry]

Simply badass!!

[@jonathangrenier104]

Love the longer formats. If i want to skip a section... Tap tap + 10 seconds. Buuut. If I want to watch the whole thing now i can!

[@johnanthony2545]

Outstanding job 👍

[@jamiebray8532]

Love what y'all are doing over there Lil Texas. Gives me a warm fuzzy feeling knowing we've got an ally like y'all in Eastern Europe. You're pretty much the only country in Europe that actually learned a very important lesson from WW2. But i really wish everyone that welds on video would actually use something to block out the arc from being recorded. Man it just kills me every time it happens. Recorded or in person, it will always do damage to your eyes.

[@FULLradiator]

Dafuq you say? Watching someone weld on video doesn't damage the eyes......it may damage recording equipment , but our light emitting diodes WILL NOT damage our eyes.....you probably believe the lies trump tells too

[@Michael-mgh-nc6vy]

Awesome build great skills

[@user-lk2sc4zr9o]

Браво Маэстро !!!

[@Barten0071]

Taczka zmotoryzowana

[@Gballpikker]

Well done.

[@petrstuntbiker885]

Good work 👏👏👏😉✌️🇨🇿🚜🍀🍀🍀

[@riverfrontww]

Sweet, great execusion. I've been thinking of building something similar for a while just not made it to the top of the list.

[@KoroshKhazaee-mp3uy]

سلام خسته نباشید عالیی مرسی که هستین ❤❤❤❤❤❤❤❤❤❤❤❤

[@grzegorzglina5149]

jak zwykle, rozdupcony system. Brawo!

[@RayBecker]

My friend, you are a Beast!! Belt is too long, no problem he fabs a tensioner. You have amazing skills.

[@sandwichman8u]

Very nice. I probably would have put a longer exhaust on it as well.

[@kevinsimpson7114]

Excellent.👍🏻👌🏻

[@Loustylz203]

that is bad ass great job man!

[@user-kx9mr9kr2g]

Достойно внимание!❤

[@uweherrmann4334]

The design might not be up to scratch, but your skills are👋👋 amazing. Thanks for this journey.👍👍

[@YODAMAN5]

AWESOME build.....great vid of an fabricator you are...MOPAR 4 EVER.

[@SteveMirabelli]

Top notch fabrication skills. Especially the re use of the AC compressor. Very ingenious.

[@kastamD]

Cool build! I know it takes lots of time, keep up the good work!

[@sethblackman8445]

hi forma cool hydroaulice truck two cool ass truck two🎉

[@marekroszkiewicz3524]

Coraz bardziej złożone te twoje projekty😊Z takim progresem to juz niedlugo łodzie podwodne i promy kosmiczne zaczniesz budowac😅Jak zawsze 3mam kciuki🤞i pozdrawiam z drugiego końca naszego kraju😉

[@marekroszkiewicz3524]

Tak na marginesie czy w 12 minucie i 40 sekundzie tak mniej więcej czy proces spawania nie jest czasem puszczony odwrotnie? Czy tylko ja się zawiesiłem 😂 Zawsze staram się przyglądać wszystkiemu dokładnie alu tu wydaje mi się że film ,,leci do tyłu"🙃ale to pewnie ja jestem zakrecony 🚀

[@marekroszkiewicz3524]

Z takich narzedzi co nie masz a można by pomyśleć to czas powoli zbudować giętarkę do rur💪to by było dopiero coś🤩rurowe konstrukcje, klatki, ramoklatki, lekkie i wytrzymałe a nie zawsze spawane z ciężkich profili ciętych pod kątem 🔥

[@MadeinPolandChannel]

@@marekroszkiewicz3524 A no trochę trzeba rozwijać kanał i iść i odmienne konstrukcje 😁😁 Mam taką giętarkę, hydrauliczną, ale jakoś rzadko jest w użyciu, jakoś ta bardziej wole profile niż rury 😅😅

[@Anode1kv]

Super super, wygląda naprawdę ciekawie, dużo pracy

[@stefantomek]

Już wiem jak zrobić wspomaganie w traktorku dzięki wielkie 🤠

[@francesco_maggio]

Io posso solo dirti che ogni video che fai è un capolavoro di ingegneria. Quanto vorrei poterti stringere la mano e dirti che sei un ragazzo davvero geniale. Grande DARUZ

[@duaneayers6117]

Paul from Fabs Rat hasn't got anything on this fabricator. Nice Work 👍

[@houseoffire72]

I really enjoyed this. Excellent fab skills.

[@lordginger636]

Looks and runs great. I would add a few link of chain to the side panels of bed and a hook in the bottom corners of end gate so you can hook the chains to keep the dump gate from fully opening this would allow you to dump a consistent amout of gravel dirt or wood chips for spreading it as you dumped