Making My 1st River Table But With Fake Wood and Crayons

[@phillipchristy7792]

Yes you paid 10.00 for the table but you made it into a 200.00 table. I have been a woodworker/furniture builder for 40 plus and I think you did a great job. When I get beveled edges like you had I will take bondo and create a stone edge all the way around it. You can either paint the bondo or do the exotic pour over it and then dap the epoxy onto the bondo with a paint brush to fill in the voids. Good job 👍

[@DuncanCustomAirbrush]

Ah great advice and always enjoy seeing your comments Phillip!

[@kyleperon4824]

I mean this in the best way. You sound so much like a man I admired....Bob Ross! Just a soft tone voice and a calm demeanor. It's quite refreshing.

[@ladyg.oflitcreation]

The multiple "Woops" while continuing to do what caused the woops along with the "Dip" song were the highlights for, me love your attitude, personality and work!!!

[@akuamcclure4456]

The spots you see on the blue is the epoxy separating from the wax. Epoxy won't permanently adhear to wax. I would have loved this the way it was with the crayons in chunks and it encapsulated in clear epoxy!! The faux woodgrain was ON POINT! You are always so wonderfully detailed which is my favorite part about watching you!!

[@rockmediauk]

Looks amazing, good job.

[@dcruicks1]

I love your crazy sense of humor. I love John Malecki's humor too

[@grittykitty50]

Love your content: I always learn something and you are very funny. Thanks for hipping me to grunge stencils. I'm excited!

[@christinechance5723]

This is a stunning piece!

[@geust1792]

I loved your river table ❤ Im glad it turned out awesome

[@DuncanCustomAirbrush]

Thank you!

[@leahfreeman9303]

Absolutely gorgeous, i love watching your videos. You make me tackle new projects. Keep it up!!! 😊

[@pamtilsonrodgers2825]

Holy moly that turned out pretty. 😊

[@MoeSlislack]

i am thoroughly impressed with that woodgraining tool. AWESOME!! The crayons were looking cool but you made the right choice. Good job!

[@DuncanCustomAirbrush]

Right on!

[@doodlebop6]

I have been so intimidated by doing a river table. Thank you for helping me overcome it! I have two, 2” black walnut pieces that I need to make a frame to get at it. Thank you also for sharing your airbrush techniques. You are an amazing teacher!!

[@DuncanCustomAirbrush]

So glad it helped!

[@pattibleau622]

It turned out amazing, it’s beautiful!! Another awesome job!!!! ❤️❤️😊

[@Lin-s6e]

looks lovely

[@kristajones815]

Improvise, adapt and overcome? 😂 i love it. I have some tv trays I've been wanting to experiment on and this might just have been the push i needed! Thank you!.

[@kryptonianbat]

That was an awesome looking river table. I did like the crayon idea but even after you covered it w/ the exotic pour it still turned out amazing looking!!! Keep the cre8ivity & videos coming!! Til next tyme...keep those cre8ive juices abrewing!!!

[@roselynenfinger8967]

It’s beautiful

[@CarrieAnnNocera]

U are hilarious to watch and ur so talented and come out with with great stuff!!! Awesome!

[@DuncanCustomAirbrush]

Thank you so much!!

[@StaceNyourFace]

"In my mind it works!" 😅 You really need to make some merch with that saying on it. 👍😉

[@DuncanCustomAirbrush]

I have hear that quite often, I think I will brainstorm on a design

[@jamminwolfie]

LOL I can't agree with you more!

[@Marcomowi]

I really like the table as well as many of your other works!! 😊 I really liked the dishwashing liquid technique and painted a 1:18 model car like this... 🤩🙏🏻Thank you for this technique and for lots of good and useful tips!! 👍🏻👍🏻👍🏻 Just keep doing it! 😊 Many greetings from Germany, Marco 👋🏻

[@AndyVaught]

Dude! Awesome work. I really liked the crayon look but doing the blue on the other side was beautiful. I’m tryk to make some space so I can start making some small tables like that.

[@barbridingsTheResinator]

Outstanding river table! I am very impressed. I didn't think the swirls would stay but they did! Love it!!

[@whisper_118]

oh, seeing the reference to John in this video was awesome

[@DuncanCustomAirbrush]

@john_malecki

[@lynnegialanze8650]

Hey this is an amazingly stunningly beautiful piece of artwork- might give it a go myself Great video, information and funny as 😊 Thank you 😊❤🇦🇺

[@davanhvilayvanh5359]

The most impressive part to me was the painted wood grain. Looks great. Good work

[@deansmith6092]

That is impressive. Your results were on par with some of the guys who spend loads on it. And your simple mould came apart great. Entertaining as always. Thanks dude

[@DuncanCustomAirbrush]

Thanks - I was actually expecting it not to work, lol

[@robertbelote5273]

This guy seems like the natural offspring of Bob Ross and Ian Rousell ( full custom garage). Here for it!

[@kellyjean4981]

The crayon idea was a cool idea, and must have taken forever to peel and cut them all up! Awesome job! Love the final result

[@MarcysArtsyFartsyCreations]

I would say it was a success 😊

[@tracybowling1156]

Great job! You didn't lose your head over the mess up. You just kept going and got the best result!

[@DuncanCustomAirbrush]

Thank you! 😊

[@suzzanellzey4217]

Thank you for the news about your airbrush in stock! I’ve been waiting for so freaking long! Ordered two…one for my husband and one for niece! I’m so excited!!!! Plus river table is so pretty!

[@DuncanCustomAirbrush]

AHHH I just saw that and was about to email you to make sure you meant to order 2, lol!! Thank you so much and I hope y'all have a blast!

[@jerritanner275]

Wow! That came out gorgeous!

[@wendyhall1395]

That's awesome! I did a dirty pour small countertop for my craft room. It was nerve wracking but turned out fantastic!

[@Shakeesmooth]

No Risk....No Reward!!

[@chefski81s.c83]

you had me going there for a second...you're still the goofy Taylor that I grew up with.....awesome videos and projects you have going on. very learnable and understandable for ppl like me who have ADHD. You could be the new art teacher for Boiling Springs, I'm just saying. I really enjoy the videos so far. I'm trying to catch up. I didn't know this is what you were doing in your spare time. I must say, good job bro, keep it up, I didn't know you had it in you....2 thumbs up. VINCE

[@DuncanCustomAirbrush]

OH SNAPP! - What's up bro! This is what I do full time now. I still do a few little side painting jobs here and there! How in the world did you come across my channel?

[@paulkribbs1701]

The light part of the wood is the sapwood. The darker stuff is the heartwood. The little core part in the center of the tree is the pith.

[@DuncanCustomAirbrush]

Niceee!

[@christinaschuricht8506]

Wow.. that's amazing work Taylor!.. love it!.. gotta love flips like this!.. right up my alley.. I've gotta try that!.. another successful creation!

[@DuncanCustomAirbrush]

Thank you!

[@Elf_Hour]

Bravo! 👏 Great work 👍👍

[@bazilwreckerloughead]

The end result looked great...& the table looks good as well! ;)

[@DuncanCustomAirbrush]

Thank you! Cheers!

[@laurielaurie8280]

i love it!!! I liked the crayon too! The wood grain you did was awesome! Great job! 😊

[@DuncanCustomAirbrush]

Thank you!

[@laurielaurie8280]

@@DuncanCustomAirbrush Your welcome :)))

[@traceygamwell8792]

Duncan. You done yourself mighty proud hun. Love it !! xx

[@DuncanCustomAirbrush]

😊 thank you

[@traceygamwell8792]

@@DuncanCustomAirbrush thank you too xx

[@robinanderson6452]

This turned out amazing!!!! I love all of the techniques you used also! Thank you for sharing this! AND..btw I did watch the Christmas video too! 😂 I always learn new things watching your videos!

[@DuncanCustomAirbrush]

Awesome and thanks for your loyal viewership!

[@jomama1055]

Stunning!

[@Cannibal.]

now you have a shiny world class tabletop to install onto a rough matte brown base lol. a little more elbow grease (or kitchen grease) whichever one you have on hand. add a glossy finish to your legs (the table legs of course) and you have a comfy 90's style computer desk.

[@DuncanCustomAirbrush]

I was going to paint it, but I was gassed by then, lol. Plus I needed to get this video finished up and posted so I may finish it up at a later date

[@Cannibal.]

@@DuncanCustomAirbrush I would love to see this. you expand your boundaries every time you try something new. you have enough knowledge in woodworking. you can make the base look just as special.

[@Cannibal.]

@@DuncanCustomAirbrush I kind of liked the shimmer of the flakes. also i think I can narrow it down to the waxy adhesive they use to keep the crayon sleeves attached. unfortunately shaving every piece is not realistic with so many crayons. take the sleeve off and try to slide the crayon on its broadside. it's a very thin layer but it's there 🙃. not that I play with crayons a lot lol

[@rwardlaw1]

Great outcome! I just wish you had showed more of the finished product. Keep up the good work.

[@DuncanCustomAirbrush]

I will try to remember to post some pictures to my Community Tab

[@buzzsah]

O, you knew, the torch

[@StaceNyourFace]

❤ the BTS "Smooth like butter" melody

[@DuncanCustomAirbrush]

lol, I knew some one would like that!

[@StaceNyourFace]

@@DuncanCustomAirbrush 😉👍🔥

[@kristinewithak8265]

Well, just wow! I've done some crayon art and when I use smaller pieces, my heat gun blows them to places I don't want them. So there's that. I think it looked darn cool. But then you LEVELED that table way UP! You're so talented. And I love RK3 Designs. I don't have it in me to do a project like this, but I love watching others do it. And for the record, I watched the Christmas video too 😁

[@DuncanCustomAirbrush]

Thanks! I super appreciate your loyal viewership - it means a ton to me!

[@NickEgo666]

Классно! ) It's was real cool! Thank's!

[@hogmajor9651]

💯💯💯🔥🔥💯💯💯

[@Maevic-fg3fm]

Omgosh. So hilarious.

[@DanielDan-rg9zw]

You could say, business in the front, party in the bac... under the table?

[@StaceNyourFace]

Is that similar to liquor in the front and poker in the rear?? 😅

[@DarthMohammedRules]

I'd like to see you take one more stab at this sorta thing with the crayons. You almost had it, and it would've been killer. Could melting the crayons seperately, then pouring them in be an option? Maybe try it again, but not a "river table." Like, maybe something more geometric, without the wood grain look on the edge pieces. But whatever, you were on the right track with those crayons, just one more try might bring something together.

[@DuncanCustomAirbrush]

Thanks so much for the encouragement!

[@Nelswifi]

That is amazing Taylor you just keep amazing me. You’re so talented. Love the table 👏👏👏👏👏 great job. Crayons not so much lol

[@scottdammer1840]

💪👊👍

[@kimeny_slice]

Am I immediately shopping online for resin so I can do this too? Absolutely. Do I also have no experience in wood working or even any crafting for that matter? Also absolutely. 😂 Great vid! Loved the crayons but also loved the finish product!

[@DuncanCustomAirbrush]

Thanks you so much and have fun! It can get frustrating when you have screw-ups but keep an open creative problem-solving mindset!

[@drew45556]

Dude I got the same trunks!

[@DuncanCustomAirbrush]

HaHa, RIGHT ON BROTHA!

[@kimberlywebb2257]

Awesome Job!! Too bad you can't make a double sided table.... flip the top to which ever mood you are in! Love the mica side though

[@DuncanCustomAirbrush]

Oh that would be cool! I bet there is a way somehow

[@Do-U-Know-me00]

Great job there. I don't understand the crayon bit, but ..oh well. Overall it was quite a piece.

[@DuncanCustomAirbrush]

Well, I wanted the crayons to be the middle, but when those spots got worse each time I epoxied (I think it might have been moisture in the crayons - i dunno), I decided to just go with the exotic pour

[@abruptlyblunt]

so what were the dimensions of the table top and how much epoxy did it take to complete it and what is the name of that tool you used to make the wood grain look on the fake wood?

[@DuncanCustomAirbrush]

look up woodgraining tool on Amazon

[@mattthebutcher5273]

Dude, that came out freakin awesome! One question tho. What’s the purpose of the crayons?

[@DuncanCustomAirbrush]

Well, I wanted the crayons to be the middle, but when those spots got worse each time I epoxied (I think it might have been moisture in the crayons - i dunno), I decided to just go with the exotic pour

[@kurtkuechenberg1684]

Use a food blender to chop the crayons...or a cheese grater.

[@Kreepykrafts]

Crossed my toes now I canny uncross them 😮😮

[@DuncanCustomAirbrush]

lol

[@gutomouville]

Great job! But I do not understand why have the trouble to melt all those crayons just to cover them up 😅

[@Cannibal.]

it's all part of the artistic process lol. and if you have an idea, do it before you talk yourself out of it. some of those ideas will happen at the same time and boom you end up with a reversable tabletop. also i think the idea was that you would be able to see the rainbow through the top layer. but it still looks great.

[@DuncanCustomAirbrush]

Well, I wanted the crayons to be the middle, but when those spots got worse each time I epoxied (I think it might have been moisture in the crayons - i dunno), I decided to just go with the exotic pour

[@gutomouville]

@DuncanCustomAirbrush I appreciate you my friend! Makes total sense and it is part of the process like our friend @Cannibal here pointed out 😅 I guess it was ignorant of me to question it, obviously you wanted the crayons to work and I hope you manage to do it someday! Maybe applying super thin layers? I don't know, but I enjoy watching you make stuff, thanks!

[@dcruicks1]

It's from the Pam

[@Trap..house.]

How much did you end up spending on materials for everything?

[@DuncanCustomAirbrush]

I already had everything. Only thing I bought for it was the $10 table and the $18 jigsaw, and like $5 for the pack of blades. Also, aside from the crayons I already had I bought 12 more boxes at .50 cent each (but only used a few boxes)

[@Rivanni1]

Get some C clamps so your project doesn't move all over the tailgate, lol.

[@Ali-H3444]

I wish the rainbow worked. Everybody does blue. 😢

[@DuncanCustomAirbrush]

Yeah I really wanted the crayons to work but it kept getting those spots in the epoxy for some reason

[@Ali-H3444]

@@DuncanCustomAirbrush it must have been the oils or something in the crayons.

[@jomercurio1520]

Don't cut the crayons shave them with a cheese grater or potato peeler

[@rhdude1995]

It's beatifull butt what was the point off burning the crayons as filler then ?

[@DuncanCustomAirbrush]

Well, I wanted the crayons to be the middle, but when those spots got worse each time I epoxied (I think it might have been moisture in the crayons - i dunno), I decided to just go with the exotic pour

[@sherrik8493]

OMG!!!! That's beautiful!!!!!! I love love watching u!!! Ur awesome and hilarious 😊 plus ur hot!!!!! 😁😋

[@DuncanCustomAirbrush]

😊 WOW< 3 thank you

[@hobofoshitsho8999]

I just saw a vid from your channel for the first time. I'm currently watching the 3rd in a row so in my opinion you're doing a bunch right because, like you, I'm easily distracted unless something grabs my attention. You know as well as me, we aren't really making the decisions on what's interesting. Maybe you don't. Doesn't matter. I came to the comment section. To compliment you on your videos. (I just realized there's no checkmark on my keyboard WTF?!) So.... CHECK. And B is a question. Are you related to a youtuber/penetration tester that goes by "Deviant Ollom"? If I had to guess, I'm thinking you could be his younger brother or cousin. There are other similarities aside from appearance that helped motivate me to ask. If there's no relation, go check out his videos and tell me if I'm way off if you don't see any resemblance. I'm curious to see your reaction. I'm going to subscribe (which I rarely do) because I've recently been getting the urge to paint stuff again. In having fun but I want more skyllz. Anyway, good sh!t, brother! -HoboFoshitsho

[@astrophysicistguy]

Why would people who watch and airbrush artist channel ask you to make a river table? That's like people who watch bass fishing channels asking content creators to demonstrate how to sew a pair of pants? It don't make no sense ... 👽🦖

[@astrophysicistguy]

Why would people who watch and airbrush artist channel ask you to make. River table? That's like people who watch bass fishing channels asking e content creators to demonstrate how to sew a pair of pants? It don't make no sense ... 👽🦖

[@raymondo162]

re-arrange these words in to a well-known phrase or saying ................ neejit fekky

[@astrophysicistguy]

Hybridw

[@astrophysicistguy]

This is such a train wreck ... please go back to painting 😳

[@buzzsah]

Green tag was $5.00 lol . WOW, there's a lot of talk about your wood. Hmm lol HELLO!!! CAN YOU HEAR ME? 𝑻𝑯𝑬𝑹𝑬 𝑰𝑺 𝑵𝑶 𝑾𝑶𝑶𝑫 𝑮𝑹𝑨𝑰𝑵 To help with bubbles, after the pour, go lightly over the epoxy with a touch or heat gun about a foot or so. test on blank first.