Making of: Copper Irish Whistle by Ren

[@bonham_music]

Beautiful work man! Amazing sound as well.

[@toshmagicbamboosound5766]

Very nice work, and music. The Sound of the Flute is fantastic, it looks good too. 👍❤️🎋

[@NicoletteDeBruijn]

You are a wonderfull Genius !!!❤❤❤

[@thierrybonnet1409]

You are a genius ! beautiful whistle ! very good job and nice music ! 😊👍

[@DataDawg59369]

I know I'm a couple years behind here, but damn man you got some TALENT. Nice build and an awesome rhythm, had to watch the end of this more than a few times! Great work man.

[@RenVasTerul]

Glad you like it! :) Thanks!

[@des8616]

What a BEAUTIFUL instrument!!! Beautiful to look at and beautiful to listen to!

[@Barmy50]

Hi. TOM SHEEHY here. I was watching your videos and fell in love with your copper whistle. I would love to own one so I can impress my friends with the mellow sounds. Keep up the great videos

[@Dex6r]

chill man my girl is on this app !

[@banjofett3949]

The bendy- didgeridoo was an integral part of the build. Kudos

[@skinwalker_triandal9982]

You don't even know how much did I miss your videos! Thank you so much ❤️

[@dondoughty488]

Thank you for sharing this. I love to see the process and to hear you make music with your product is a real treat.

[@bshort1964]

Wow I'd love to have one of those in high D. That's so awesome and it sounds great !

[@josephkretschmer3388]

Nice whistle, nice music. Sounds like Omnia 👍

[@coooolibri]

that composition at the end was really cool. i wish i had this kinda setup!!! this is what i do at home daily, but i cant record properly :( well done

[@RenVasTerul]

Thanks! :) I wish you to get a better setup then ♡

[@TomFrajer]

Extremely good DIY video with nice song at the end :)

[@RenVasTerul]

Thanks man! :)

[@RenVasTerul]

Hej! Na końcu filmu usłyszeć możecie tenże flecik w akcji ;) Obejrzyjcie do końca bo warto :D Hi! At the end of this video, you can hear that whistle in action ;) Make sure to watch the whole video - it's worth it :D

[@hotshot0476]

I've started practicing throat singing but can't tell if I'm doing it right.

[@lukashalabica2161]

Nice work, i did too whistles From copper, thé last Is in Bass B with Woodem head And its lovely sound

[@menace46]

Wonderful craftsmanship! Congratulations

[@883malutka]

Koniecznie czekam na końcową melodię w osobnym filmie/formacie. Pragnę słuchać!

[@salemsgaye993]

Im very happy that this was the notification i woke up to haha wonderful job, friend!

[@wellshoot]

Playing along with you at the end on my bass pvc whistle. I made my first one yesterday and it is super fun! This video inspired me to make it and I plan on making a copper version this week

[@RenVasTerul]

Awesome dude!

[@mikhailperkhov]

Amazing! Love This Atmosphere

[@lennylink8772]

Amazing

[@NoNo-zp9bt]

Awesome. Thank you

[@RobbieBoy33]

Very cleaver man, well done.

[@IrishBodhranTippers]

Just wow!

[@pedroscaglione3450]

Un pichón de Genio, músico y artesano. muy lindo.

[@dejansmalcelj]

Awesome!! ❤

[@MsSkilledgamer]

That was Great loved you showing how to make then your crafty work in action!. nice....

[@dakotadaily7404]

Awesome work and amazing song at the end it sounds wonderful. Around 6:40 you added a Coupling to the pipe what was it for?

[@Roensmusic]

nice video :) skillful

[@AnnaëlleD]

Wow! Excellent! Everything: the flute and its "woody" style, the video, the music... even the "SUBSCRIBE". I subscribed, of course! Thank you for this magic moment. Love.

[@RenVasTerul]

Thank you! ♡ :-)

[@osiasu]

Sounds awesome by the way!👏🏼

[@eldenaguilar9491]

Hi,I really injoy the video,,,and I am trying to create one by my self,, watching from Belize Central America,,,

[@Jopmasselink]

nicely done man, tribally groovy!

[@woodspirit9973]

This would have been very much better had there been some commentary to explain the process for those of us who could not clearly see what was being done or interpret what we were seeing. The sound is lovely and I would have liked more in the way of instruction so I could try to make one myself.

[@abderrahimbenmoussa4359]

I personally prefer the silent process with comments bellow

[@antonello35171]

Applausi!

[@Barmy50]

I would love one of your whistles please

[@RenVasTerul]

Hey! Contact me on Facebook (page with the same name as the YT channel) ;) We'll work something out :)

[@loganashlee6494]

amazing!

[@abderrahimbenmoussa4359]

That was amazing !

This is great, i want to do exactly the same. I only don't understand one of your steps. Why do you halve the whistle, put the block out and then weld it together again? And then put the block back in?

[@danielkarsten1579]

What is that black square thing you made a hole through at 2:52 that you used to hammer that block/stick of wood through to create that cylinder shape that somehow fit perfectly snug into the fipple end? Is the black square sharpened to make the hammering easier or did you just have to hit it hard for a long time till it’s through? By the way, what’s the part called that goes into the fipple end? Great playing and excellent craftsmanship! Yahuah bless! 🙂

[@j.muckafignotti4226]

Wow!

[@thefluteprayer]

Awesome, great job 🙂

[@csilva1069]

Maravilhoso!!!!!!!❤️❤️❤️😍😍😍

[@blakeditions]

Great!

[@mariojoelbarriossanchez1999]

Felicitaciones amigo. Puedes hacer un tutorial más despacio para aprender hacer una Flauta

[@soundvillage001]

Great tone mate. I’m on pvc at the moment but this is something to aim for. Nice job

[@user-yy3ro9uy7j]

Znalazłem, przesłuchałem, zapragnąłem kupić. 💳💥💥💳💥💳

[@RenVasTerul]

Hej :-) Napisz do mnie na FB (fanpage o tej samej nazwie) ;)

[@user-yy3ro9uy7j]

@@RenVasTerul zrobione!

[@BrendanRing-k7m]

why did you cut off the top part and then put it back together again with solder? For fine tuning?

[@cathytai]

Do you have a portal where you sell the whistles you make? I am interested in purchasing one of your copper Ds. Thanks!

[@silly5220]

fun fact: the guitar at 9:49 isnt sped up, hes just very good /j (fr tho wondeful video and beautiful song at the end too)

[@jakubobaczewski3022]

Jaka jest całkowita długość fleta?

[@_swordfern]

Because you cast the spell, I shall subscribe

[@RenVasTerul]

Hah, thank you! :D ♡

[@fishmut]

Awesome job , loved it I made a couple of whistles and they both ended up garbage , love yours , great job , loved the sound to , if I was near you I would of bought one from you , keep the videos rolling bud . 👍

[@janespright]

Hi Ren! Beautiful instrument construction and beautiful music construction as well. One curiosity: are the instruments at 2:02 and 11:24 one and the same?

[@RenVasTerul]

Thanks! Yea, it's just a pvc didgeridoo :)

[@CamperAustraliaTrip]

Sprzedajesz te swoje instrumenty?

[@RenVasTerul]

Hej, owszem :-) Odezwij się do mnie na Facebooku, strona o takiej samej nazwie ;-)

[@osiasu]

Can you tell me the spacings between the holes and what size drill for the different holes? I fancy trying to make one. Also is it 22mm copper?

[@JackKapral]

Kolego, masz jakiś patent na obliczanie gdzie powinny być dziurki? Widziałem na kilku zagranicznych filmikach, jak kolesie robią jakieś tam flety indiańskie czy inne orientalne. Jest na to jakaś metoda?

[@metalcikiz2779]

Sick dude i immideatly sibscribed

[@RenVasTerul]

thanks :D Cheers!

[@jorgeoliveira203]

OTIMO TRABALHO MEU AMIGO PARABENS NOTA 10!!!! MEU COMO ACHAR AS MEDIDAS DAS DISTANCIAS DE CADA NOTA ANTES DE FURAR CANO , BAMBU !!!!! SOMENTE, AGRADECO, VOCE E UM ARTESAN NE!

[@DewTuck97]

How do you make the whistle part work? I have not been able to make a functioning one yet

[@patrickbacher7881]

It is about the fipple and the airway alignment. You file the fipple to a sharpish but not too sharp edge and then you make sure that the wind way is like 80% above the hole like 20% below. The air should blow through to the fipple.

[@patrickbacher7881]

At the wood insert step slowly lower the hole over and over until it sounds right.

[@foofy14]

Do you have the plans for it? I'd love to give it a go!

[@teetracyfrazier5162]

Do you make these to sell

[@mikopodroznik233]

Gdzie mozna kupic ? Pozdrawiam

[@jmvwindscreesjmv655]

Should you sell this whistle

[@raimundosousalima1999]

Amigo como devo faser para adiquirir uma dessas flautas suas.

[@eduardomiranda7631]

Muy bonito. Y las medidas

[@quasarpulsarspark]

Hello, can you give dimensions of the copper pipe used, hole dimensions and position on the pipe to build this flute ?

[@Sk0lzky]

Check out this resource music.bracker.uk/Music/Whistle-Calculator.html Just keep in mind for transverse flutes you have to input your own dimensions because for some reason it uses the same formula as for the fipple

[@_swordfern]

See search Nicolas Bras on KZbin. He has blueprints. Try Nicolas Bras PVC DIY

[@merhabanaber5837]

Where are you from ?

[@isntimportant]

How is this an 'Irish Whistle' and not an English tin whistle (albeit made of copper)? What am I missing?

[@SandycurleySandycurley]

The tin whistle is Irish

[@bonenfant96]

Smart guy.

[@ontheotherhand7627]

What's the tune? Very catchy! Thanks for a fine video, and that whistle sounds very nice as well.

[@survivethewild9050]

Going off my ear it's probably high D

[@eduardomiranda7631]

Podrías decirme largo diametro del tubo y medidas destancias de los agujeros gracias maestro soy aprendiz

[@РоманБорисов-п8т]

Супер

[@indicacoesnerd]

Muito bom 😃

[@eldenaguilar9491]

I like your video,can you send the the measurements,I really appreciate it, I will try to do one,saying hi,from Belize Central America,,,

[@Sk0lzky]

0:50 gdzie kupujesz mufy które wchodzą na rurki bez rozgrzewania do czerwoności? Lol

[@RenVasTerul]

No ogólnie to w sumie każda rurka ma dopasowaną do siebie mufę w odpowiedniej średnicy :-P Dowolny skład budowlany / castorama itp.

[@Sk0lzky]

@@RenVasTerul właśnie w Castoramie ostatnio byłem bo chciałem spróbować metalu i chuj bombki strzelił, nawet "press fitting" nie wychodzi... No ale poszukam jeszcze, może w Leroy Merlin będzie, dzięki

[@jonicesar]

💯💯💯👏👏👏👏👏😍😍😍😍😍

[@sedatgunduz8490]

👌🙏🙌

[@exrad2153]

Robię taki 3 raz, z drewna, z czarnego bzu... I to jest magia po prostu, tego nie da się zrobić... Można do Ciebie gdzieś napisać w kwestii zadania pytań, poradzenia się? Wysłania mp3 i zapytania co jest nie tak? Błagam, pomóż człowieku! Bądź człowiekiem!

[@RenVasTerul]

Wiesz no ja przyznać muszę, że sam ciąle się uczę i proces jest dla mnie wciąż mega trudny. Wychodzi mi może jeden flet na 10. Ale co do drewnianych to niestety nie mam jak ci pomóc bo w drewnie totalnie robić nie potrafię :( Nigdy mi się nie udało zrobić grającego drewnianego fletu jeszcze

[@exrad2153]

@@RenVasTerul mi się jedynie udało zrobić gwizdek ;_; a wiesz może dlaczego daje rade wydać czysty (dość) dźwięk na kompletnie zatkanym flecie? Zakryte wszystkie otwory i palec w końcu Bez tego dźwięk jest strasznie wiatrowy i stłumiony

[@artessimples4663]

👏👏👏👏👏👍

[@LCbas]

Ile za taki flecik u Pana ? Ps. Super muza !!

[@TheMtnmamma]

I would be interested also when you decide to sell them, please reply on here so I can find them. I do not have the tools to make one . I would rather spend my time trying to play

[@raimundosousalima1999]

Me venda uma flauta dessa amigo, entra em contato com migo.

[@csilva1069]

Procura no site das americanas, tem flauta irlandesa. Comprei uma e chegou semana passada. Não é igual mas quebra um galho.

[@karthikn511]

Hi bro Please help Copper pipe flute 1 pec can send me bro

[@nadhaswaramnew8450]

Nice ..but ...very fast process i can't

[@ElBrennerTwitch]

will you sell at some point for amazon? I'd love to have one!

[@RenVasTerul]

Well, maybe not amazon but some selling platform - sure ;)

[@_swordfern]

I'll say it. F$$$ amazon.

[@shaunchambers]

TOXIC?

[@RenVasTerul]

I always coated them in a thic layer of natural lacquer :) But yes, it's a slight issue, so now I just use stainless steel for the moutpiece. However copper's toxic properties are somewhat misunderstood. It's a cumulative issue, related to the oxidized layer of copper (precisely the green one), so as long as you don't have green layer on your copper you're fine :) Its good to remember that copper is still has good anti-bacterial properties and is often used for tap water piping as well as drinking water bottles :)

[@GeorgePiskopanis]

One day that machine will catch your hair.

[@shneedle_woodz3097]

subscriiiibed

[@patrickmispelaere4203]

Without explanation, this video is of no interest; It only satisfies the narcissism of its author

[@RenVasTerul]

Well it is NOT a tutorial/diy video, it's just to showcase the process. Someone who's already taken steps to figure out how to make flutes might find useful ideas here, just by observation. What would be the idea of making instruments for sale and at the same time teaching everyone how to do it by themselves? Makes no point (sadly) in a money-driven world. As much as I would love to share every thought behind it, quite simply I cannot afford it.

[@hossplay100]

@@RenVasTerul I agree with the previous comment. Beautiful flute. Skillful flute makers have a waiting list. So what do they care if some people make one themself. Also, banging on a guitar was a distraction. Waste of time.

[@_swordfern]

Patrick struggled in his childhood and blames others for his dissatisfaction in life. Everybody love Patrick! 💚💚💚💚💚💚💚💚💚💚💚💚💚💚💚💚💚💚💚💚💚💚💚💚💚💚💚💚💚💚💚💚💚💚💚