Making steel sheet Roller Bender machine

Working with steel is fun if you have the right tools.
Sheet metal roller bender is a machine that I don't have, so I decided to make it :)
I used a lot of scrap yard stuff so the cost was very low.
Thanks to the use of the motor and gearbox, I was able to resign from the crank, which made the work much faster and more pleasant.
With this tool, I can roll 2 mm thick and about 53 cm wide, which should meet my requirements.
Check out our other workshop tool making videos:
• How to Make Firewood C... - How to Make Firewood Cutting Machine DIY
• The easiest way to cut... - The easiest way to cut steel - Machine build DIY
• Welding & Cutting rota... - Welding & Cutting rotary table - BUILD
• Big Vise using Bottle ... - Big Vise using Bottle Jack [PLANS]
• Electromagnetic Drill ... - Electromagnetic Drill press VISE [PLANS]
• Making Lathe MILLING A... - Making Lathe MILLING Attachment

[@1967alfons]

No music, no coments only machine and tools sounds. Perfect!! The best!! Congrats! 👌

[@Thewatson77]

This guy has been killing the asmr game mechanically for years! Always a pleasure to watch

[@mahafujalom8784]

হয়নি উ

[@MakeitExtreme]

Nice job dude!😎

[@MadeinPolandChannel]

Thanks!! 😁

[@GBWM_CNC]

Urządzenia, które pozwalają na wykonywanie kolejnych, bardziej wymagających urządzeń. Coś pięknego! :)

[@keithrichardsson9008]

One of the best channels on you tube. Please think again on that bad habit of leaving the chuck key in the chuck, bad accident waiting to happen.

[@bennylloyd-willner9667]

It's heavily edited so he maybe takes it out safely out of camera.

[@lukaszplonka2412]

@@bennylloyd-willner9667 he leaves it on chuck when lathe is unpowered. If turned on accidentally it goes flying

[@combatcurtful]

@Lukasz Plonka they don't go flying. They stay in the chuck until it comes around and breaks off in the chuck when it hits the ways

[@bennylloyd-willner9667]

@@combatcurtful it still can break and send pieces of nasty stuff to your head... I think we just don't see when he takes it out or put it back in.

[@MadeinPolandChannel]

The lathe has all the safety features so I'm not worried about that. if there is a wrench in the chuck, the guard cannot be lowered, and if the guard is not lowered, the lathe will not turn on 🙂

[@scottwarner1733]

Great video, I always enjoy watching you create new inventions!

[@markschroter2640]

Time for a shop tour again. Keep up the good work.

[@user-wj1po1ut4n]

Супер!Всегда смотрю с удовольствием!

[@KeyserSoseRulz]

You know the fabricator is good when he makes his own tools.

[@selsovet71]

Дружище с таким инструментом можно за самолёт браться Здорово, завидую по доброму! Удачи Тебе.👍🤝🤝🤝

[@Sava.829]

Браво мајсторе поздрав из Србије.

[@buczo102]

Świetnie wyszło! Jak zawsze!

[@SekAustria]

Nice project bro and very effective.

[@keithmonarch447]

Your channel just popped up. Yes, this person is Keith from Michigan USA. I look forward to seeing future projects. I know a few people from Europe. Nice work on this project 🙂. Well, I'm going to bed now. Have a good week....

[@samrodian919]

A Berilliant no nonsense piece of fabrication! Top notch Sir!!

[@williamyost2837]

I could not love these videos more!

[@user-kt2hb8xr3p]

Great job, thank you brother. You are so talented

[@marofigaro]

Super! Zazdroszczę warsztatu i pomysłów😀

[@randytravis3998]

I have a factory hand crank roller .. they put gears at the end ,, your setup is good with the slip roller ,, I don't have a slip roller on mine .. only thing I would do is have all the switches on the same side ,, great build

[@user-ye4sd3db6g]

Красава! Золотые руки, по-хорошему завидую. Удачи во всём!

[@yeagerxp]

Excellent work 👍👍👍 . Thank you for sharing. Take care of yourself, 🇨🇦

[@frenchcreekvalley]

Very nice! Good fabricator, nice shop, easy to understand video.

[@temyraverdana6421]

Thanks, a great first project for 2023 new year.

[@johncarter9067]

So clever could watch your videos all day

[@Nobe_Oddy]

I'm not sure why you have TWO SWITCHES to make the motor reverse.... but if it work then IT WORKS!!! I LOVE how you make it all look SO DARN EASY!!! You are an AMAZING BUILDER!!! GENIUS!!!

[@tjkoker]

Forgot how good your videos are. More, more! Cheers!

[@sagittariussurge5565]

His videos are so satisfying to watch

[@eduardopagan7365]

Saludos desde Puerto Rico Maestro usted es un genio , lo hace ver demasiado facil pero es por el mega talento que usted tiene, Gracias por compartir su mega talento creativo , se nota que usted Ama fabricar cosas muy utiles ,Tiene la habilidad de fabricar herramientas cosa que no todos tienen, Bendiciones y que logre todas sus metas.

[@jchoong4965]

For Bearing material. Copper based metal bushing provide needed compressive strength for this application and lubricating effect comparable to polymer. Thanks for sharing idea of plate bending machine building.

[@estebanjosemerlo]

Hola Hecho en Polonia, buenas tardes. Que buena maquina herramienta que construiste. Es de gran utilidad. Muchas gracias por registrar y compartir el paso a paso con todos nosotros. Muy buen trabajo. Segui adelante. Gracias.

[@jorgegoncalves467]

Great ideia .Nice ,well done .thanks 👏👏

[@jot149]

Niemożliwy jesteś!!! 🔥🔥🔥

[@jjbode1]

Thanks for dwelling on the motor nameplate, very useful.

[@kulebyakinjoe]

Just feel the power and strength!

[@user-cm7rg1tb1x]

Привет. Я тоже собрал маленький, 550 длина валов в чистоте, на нижних 2 валах подшипники стоят 205,диаметр валов 70мм, на верхнем конусная втулка с одной стороны из латуни. Валы из трубы, не годятся, со временем прогиб будет, конусные с одной стороны, чтоб снимать сваренную обечайку. Не правильно сделал, с одной стороны боковушка сниматься должна, именно в районе верхнего вала, как раз конус в работе, по типу как петли, НЕ ДЕЛО ВАЛ ПОСТОЯННО СНИМАТЬ, посмотрите промышленные вальцы, БОКОВУШКА ОТКИДЫВАЕТСЯ. всем удачи в постройках. 🤝.

[@francoarielmazzotta6063]

Hacia tiempo que no subias un video! Como siempre, estilo muy bueno. Estoy a la espera del siguiente video. Abrazos desde Argentina!

[@wonderingskills1]

Great work❤

[@DreamerDrafter]

Tool for bending plat steel was nice idea. Thank you very much for sharing your creation. Regards🙏🍻

[@09FLTRMM77]

MM77 Approved 👍🏼👍🏼

[@VesperCadha]

1:30 jaki ładny pindol wycięty w stali :) a film jak zwykle zajebisty!

[@diverpoa]

Practical project,nice.

[@vannewman4905]

Welcome back I have missed your fantastic projects what a fantastic tool you have made. I am so envious. I hope the conflict near you is over soon and you have no issues

[@mdsarfaraj-xk1ud]

Always delight to watch ur video . something new to learn

[@zacharywong483]

Fantastic work!

[@lovejcdc]

Excellent video and excellent machine 👏 👍

[@mimiporsche]

Complimenti per le tue ottime idee e per le tue saldature!! Un saluto dall'italia

[@DanKoning777]

*Well done* as always.

[@mrb.5610]

I have a need for a set of rollers - this version's heading to the top of the list ! God knows why commercial ones are so expensive .... ..

[@MedSou]

*A masterpiece* 👍👍👍

[@user-ow5bj2xn1j]

Спасибо. Интересное видео.

[@bostedtap8399]

Excellent work, clever techniques on the lathe. Thanks for sharing.

[@sampathgamage861]

Clean & Finish.. Beutiful..👍..😍 !

[@Evilslayer73]

Another awesome build here folks!!!!! happy new year from Montreal!!

[@headmaster84gm]

То что надо для просмотра за ужином)

[@nicgurkweitz389]

On the last roll of the video if you look on the right hand side of your screen you'll see the top middle bar rolling out as you're passing things through , you might consider a screwed on cap that's slightly bigger than the bar or something so that it doesn't roll itself out like that.

[@pawelaco]

Super narzędzie, bardzo przydatne do kolejnych projektów. Wszystkiego Najlepszego w Nowym Roku 2023. Pozdrowionka

[@MadeinPolandChannel]

Dzięki i wzajemnie wszystkiego dobrego 🙂

[@adrianpherreira8176]

Genial, parabéns!!!👏🤌👍

[@romanvit5265]

Super proekt. Masz złote ręce i wiele maszyn.

[@5eZa]

definitely recommend adding a mushroom emergency stop button on that one

[@jayfromtexas6718]

Incredible!

[@Binodon-Binodon]

I am impressed

[@jaredmism]

Everything looks great Just a genuine question though… Why did you go with the composite bushings instead of roller bearings?

[@manickn6819]

That is not a composite. Its round stock PVC. Machines really nice but its soft. Those would plastically deform in a very short time. If he wanted to do a bushing instead of a bearing he should have used bronze ideally. Brass is a little soft but its still a lot better than PVC.

[@lvan12390]

отличная работа

[@charleskutrufis9612]

very nice, thank you

[@user-uy9do1hq7y]

Отлично! Очень интересный подход,

[@pawekowalski7469]

Kolejny super projekcik, niech służy i buduje kolejne sprzęty.👍 Wszystkiego dobrego w nowym roku 😀

[@My_Little_Pony_PL]

Bravo. Pro skill ❤

[@drummerman1206]

Not even gonna say what that looks like at 1:28. 😂😂

[@vinceianni4026]

Good job mister well done

[@opendstudio7141]

I like it. 👍All it needs is some paint and a few stickers and it would look store bought,

[@NapierNimbus]

Excellent job

[@proyectosycnc]

Buen trabajo!!😃😃

[@Zolotov76]

На подшипниках надо делать. Втулки быстро кончатся.

[@MCsCreations]

Fantastic work, dude! Really brilliant machine!!! 😃 Stay safe there with your family! 🖖😊 And happy new year!

[@maritzahernandez3419]

Excelente 👍

[@jamezxh]

And we shall call him Welding flash.

[@MrPINKFL0YD]

That is a really good machine

[@Vikingwerk]

Very nice!

[@78dwk]

Awsome Work as always, Godbless

[@abduljelil.a3514]

بسیار عالی و حرفه ای.

[@marekroszkiewicz3524]

Piękna robota. Tych maszyn i urządzeń to masz już tyle że w zasadzie niedługo trzeba będzie jakiś prom kosmiczny zacząć konstruować, żeby wszystkiego użyć 😋🚀

[@MadeinPolandChannel]

wiesz, nigdy nie wiadomo, co do głowy przyjdzie🤣

[@hardworker645]

God bless you

[@assassinlexx1993]

As a side note. ◇2 HDPE plastic is easy to use. With a jig the plastic when soft can been molded into things like knobs , handles etc. Just one question: Why didn't you use the lathe to true up / smooth out the rollers? I can't argue how well it works just as it is.👍🏻

[@alfonsoloaiza5691]

Que calidad de videos 👍

[@valterp528]

great work

[@miguelantonioantonio6921]

Good night!!meu amigo faz tempo q estou esperando novos vídeos,+ 1 top,parabéns,🇧🇷🇧🇷🇧🇷

[@miguelantonioantonio6921]

Aqui no Brasil oq vc fabricou foi uma calandra,pra arredondar chapas retas,top my brother,deus abençoe sempre vc e toda sua família

[@Mrtonnyfly]

Hey guy, you are amazing!

[@nathkrupa3463]

And happy new year sir you and your family.

[@user-jq2ng5nr8x]

Дуже крутая робота і інструмент хороший

[@robanpreetsingh2246]

Big fan sir (panjab) India ❤️

[@Flying0Dismount]

Can't say I'm impressed with this build compared with other stuff he's built in the past.. Odd combination of super heavy duty with barely strong enough... The ultra thin walls between holes and the sliding pieces, same with the threaded holes for the adjusters are not very strong. The end plates are super thick plate, but joined with just two strips of thin L-channel.. Then aluminum rollers and plastic bushings.. Yes, you are able to roll 1.5mm stock, but just barely: the rollers are bending and flexing noticeably as you roll and I can see this thing breaking itself after a few uses or you are tempted to try to roll some stock that is just too heavy, especially as there's a motor on it instead of a manual crank and you can't feel the feedback telling you the material or bend radius you're asking for is too much: the motor will just run until something gives... If you're going to all the effort, I would have just built the whole thing super heavy duty and then it would last for years vs just a project or two before becoming the subject of or scrap recycling for the next project...

[@tinchukumar2046]

Hi

[@suhyura]

Safety first!

[@IPiotreKSC]

Rozwalasz system pomysłami ;) pozdro i powodzenia z nowymi projektami w tym roku ;)

[@mateuszdomaszynski5624]

Spoko jest ,jeszcze jak bys mugł tą walcarka stożki walcować,to juz wogule mega,ale i tak jest spoko,Wszystkiego dobrego w nowym roku

[@user-zb8fs1ob6d]

Good Good Good

[@HanifEFIMechanical]

Good work

[@GuglGavno]

чувак рукастый. полезную штуку сотворил. но мне кажется, что подшипники скольжения долго не протянут

[@user-cm7rg1tb1x]

Верно, не выдержат. 🤝

[@be007]

nice !

[@bartlomiej19850716]

Dobre💪 👍 Ps. Czy tylko ja dmucham w ekran w 2:55 😁

[@MadeinPolandChannel]

To takie efekty specjalne 🤣

[@Tictacpanter]

Love the build. I could never build anything to this level of detail. My one thought is, would it make more sense to put the switches out of the work area- maybe on the side. So if you get pulled into the machine they aren’t covered by potential material in the rollers and can be quickly accessed to turn off or reverse?

[@user-lk4ei6ch2l]

when drunk or drug, just don't work🤣🤣🤣

[@Tictacpanter]

@@user-lk4ei6ch2l accidents happen to the sober too. Easily accessed safety shutoff switches exist for a reason. I’ve worked with enough guys missing digits from “the good old days” to put the fear of complacency in me.