Making 14 Hp Brush Mower - using Lawn Mower parts

We will try to add a longer and more detailed test in the next video :)
Using parts from an old broken lawn mower, we decided to do something very useful.
Brush Mower It is very necessary for high and varied green areas. It can cut grass, weeds and even small trees or branches.
We used a 14 Hp engine and a hydrostatic gearbox for the drive.
Blades bought at a farm store for an orchard mower.
• This Machine is Great ... - This Machine is Great for Shredding Branches
• How to Make Firewood C... - How to Make Firewood Cutting Machine DIY
• Branches will Never be... - Branches will Never be a Problem again - Wood Chipper build
• Extreme Brush Cutter B... - Extreme Brush Cutter BuilD
• Branches Chunker - Woo... - Branches Chunker - Wood Terminator
• Kinetic Log Splitter -... - Kinetic Log Splitter - Build | 0.7 sec Cycle

[@Zeus_a_Gentle_Staffie]

These no talking, no music, just the sound of work, are the absolute best to watch. In my opinion of course😊👌

[@migueldelacruz4799]

My boss tells me I talk to much and than complains about a lack of communication.

[@regsparkes6507]

It's another reason that I ( for one ) can watch his videos all the way through, without nodding off ::)

[@tedhardulak7698]

This new trend to have background music, for people talking, especially on a promotional Video is so annoying. Especially when it just repeats.

[@regsparkes6507]

@@tedhardulak7698 It's a pity that some KZbinrs don't get the message, isn't it? ( what they DON'T GET is a subscription from me )

[@spirosspiros1997]

​@@regsparkes6507is it in

[@jeffmcdonald101]

Love how you power tap all your threads while other KZbin people are snapping them turning by hand and are scared of them. You know your tools well!

[@willieshaw2522]

Problem is that many of the things he taps only ends up with 1-2 threads holding the part on. Rule of thumb is the tapped material needs to be at least as thick as the fastener diameter. In many cases, such as the brake rotor hubs and many of the handlebar fasteners, the material tapped is thinner than the fastener, and would fail if torqued to the suggested torque needed to keep it tight. While I like how sturdy his builds in general are, I often see the fastener issue. Would be just as easy and stronger in the long run just to weld nuts on.

[@haydenf1353]

Bro is single-handedly keeping the socket head cap screw industry alive!

[@tgi3197]

He makes it look like he's a "maker". But given his penchant for socket headed cap screws, I think he's secretly a machinists. Lol

[@emmanuelmachata3534]

Excellent

[@NicosLeben]

I think they are just more common here in Europe.

[@adriancarrillo6646]

​@@tgi3197¹

[@user-uv3kr2jk4i]

​@@tgi3197ááQqqq1 tô no vi no tá vc vc o vi vio😮 No Ok

[@joegilly1523]

Wow nice build. As a retired service technician ,with a lot of SNAP ON and Mack tools ,you have bigger tools than me. I was a Mobile technician for 31 years . I Like your plasma cutter. Nice to see a good welder run a bead ,not the spot, spot,spot. Great engineering on it ,it looks better than a new John Deer,no rust on yours. You even put safety stickers on it. Hats off to you young man from Upstate New York 🇺🇸

[@AnilSaini-mo2bi]

❤

[@allswildmmi6228]

@joegilly1523, I believe we know each other from high school. Our sports teams were spartans. In 1973 we were 22-0 in varsity basketball. Does any of this sound familiar?

[@joegilly1523]

@@allswildmmi6228 You sound like a Main Endwell guy. I’m in Endwell . I was a JC GUY.42 Years ago. We won the Football Championship that year.

[@Slide100]

Can we all take a moment to acknowledge that this man bends sheet metal by hand, using a bench vise, and gets results that people hope for with their CNC press brakes?

[@tjstevens001]

I've worked with a few of these guys over the years. They are called model-makers!

[@bradcavanagh3092]

What a great project! I'm constantly in awe of your precision with an angle grinder.

[@hugodesrosiers-plaisance3156]

It's fascinating to see how all the bits and pieces come together, and the ingenuity in so many unexpected places.

[@blainethompson6583]

If you open up the back part of the deck that encloses the blade and add a rubber flap it will handle cutting thick material alot better. it has no where to go after the blades cut it and it will put alot of extra load on the motor. Awesome build!

[@lm4278]

Agree. Except, I'd put it out the side. May be too dangerous out the back. Even with a flap. Good idea though.

[@yuri_grillo]

We need a mower v2.0 built by him :D. I would love to watch.

[@wtchr6883]

​@@lm4278how can you make this more dangerous?

[@lm4278]

@@wtchr6883 the OP said make an opening out the back side with a rubber flap. Could possibly fling something out the back at the operator. That's why i said to make an opening in the side. Directed away from the operator.

[@MrPaulviles]

@@wtchr6883versions of brush mowers made in the 40’s-50’s only had a thin piece of plate on the back the rest was completely open.

[@bluethunder1951]

Awesome build 👍🏻, one thing to keep in mind is to protect the bolts on the bottom of blade and shaft, my skid steer mower has the same style blades if there’s a rock and it gets hit by the bolts they get damaged, what I did was to make a cover from and old oxygen cylinder cap and welded it on, I cut it just a bit less then the cut height, now it works great as it can bounce over rocks and save the bolt heads.

[@ridethroughlifertl]

I watch so many channels of people mowing, and also ones of people building things. It's awesome to see the two brought together.

[@Vikingwerk]

Impressive build! You sure build things for strength!

[@ryuk2784]

leg amputator 3000

[@user-nj3ip3ul5v]

22:30 Excellent design,excellent craftsmanship, excellent shop,and excellent tools. Very well done !!!

[@lonhoschar1943]

WOW!! You build quite a nice mowing machine!! That really looks great and mows very well. Nice craftsmanship!!

[@opendstudio7141]

Nicely engineered. From this video, it is clear why the blueprint took so much effort. Lots of components to source and mesh together.

[@giorgiomartini5246]

Excellent and unparalleled images ! The synthesis of the various processing steps is commendable. Compliments.

[@RetiredCasper2023]

Well done, guys! Shows the world that craftmanship is still alive and well! Thank you and get patents on everything you do! Be Safe!

[@jamesadams893]

I gotta say this guy is pretty handy in the shop

[@blabaduplatinum1]

14 minutes of one video. Subscribed. I’m hooked on this channel now.

[@7891ph]

I like this one; glad to see you bought the correct type of blades for it. In addition to the jungle wheel's on the back, you might want to consider a removable set of casters for the front for ease of transport over longer distances. Just a thought.😊😊😊

[@peterbachman5965]

Most brush mowers do not use casters out front. Check out BillyGoat and BlueBird mowers :D Casters actually prevent easy operation when using for real brush, not long grass.

[@MrRenoman2011]

You are very talented what an amazing machine. Looks and works awesome

[@filip_sedlak]

This is a war machine! 😁 Greetings to our Polish cousins from Czechia.

[@diyathomevn]

the car is great. I look forward to having your car to work. Those are the most amazing things to see.

[@frankrobinsonjr3538]

Of all projects that you have done this is by far my favorite!!!!! Fantastic job sir!!!!

[@jeffmcdonald101]

Great video!! What an excellent machine, very effective and looks great too. Your projects are always high quality and this one was particularly impressive. Hi from Australia!

[@Charliemmafan]

You guys are seriously geniuses with what you can make!

[@barrytipton1179]

Wow I’m impressed especially the way you didn’t build it before you ground the edges you knew it would work

[@MuhaloTube]

WOW! This is almost like a BCS tractor! Amazing design and build skills.

[@merlinalphonse9336]

ceci est l'élaboration d'un prototype ! Votre savoir-faire est un professionnalisme hautement qualifié .Bien sûr, à qui serait équipé de matériel pour exécuter les tâches de mécanique générale , une source d'approvisionnement variée , sinon disposer d'un stock de profilés .... et ceci n'enlève rien à la méticulosité de votre travail, conduit avec rigueur et précision . ça ne me semble pas à la portée d'un "bricoleur" même bien outillé. La nature et l'épaisseur des matières employées , obligée pour un appareil de ce poids dont l'objectif est de satisfaire longtemps son propriétaire. Je vous félicite pour votre ingéniosité qui est le fruit d'études sérieuses . Bravo !

[@jamescooney7445]

The motor should be on the other detection so when you tip it up over things the oil doesn't go all to the cylinder head. Great work beautiful machine.

[@jamesray9009]

Im building a front end loader for a zero turn lawnmower .. I hope my build comes out half as nice as your builds are ..

[@Dancing_Alone_wRentals]

Let us know when you post...That idea is going to be cool!

[@kameljoe21]

Yes I like this idea... I subbed just to see if you ever post a video. Would be a cool project..

[@batnrs1]

Hats off to you young man from Germany,well done!!!

[@1scottdees]

Very clean fabrication skills.

[@jims6323]

This gentleman is a craftsman of the highest order!

[@niklar55]

The JOY of a well equipped workshop! .

[@pawelaco]

Piękna maszyna, dużo pracy i super efekt. Pozdrowionka

[@fastt11]

Ciekawe jak trafi w kamień, jakie będą zniszczenia. Poza tym super maszyna.

[@bigchiefbear]

This guy is the real deal. Awesome work.❤

You are a very good KZbinr.

[@JesStricker]

That project turned out amazing! Nice work

[@coryboyd7958]

I wish I lived close to this guy. I could watch him work all day

[@tula_molotok71]

Excellent work👌👍👍👍I'm from Russia. You great success.

[@elitecystuning]

I have bunch of walk behinds I’ve collected mostly exmarks I’m seeing a simple great idea with one

[@michaelmorgan5303]

Now that's a man with some skill. That looks way better than a factory built mower

[@johnwurst6691]

Very cool! I don't have time for underpowered lawnmowers! This one makes hay!

[@jamesmorrisy1908]

He had a vision and he executed! Nice machine!

[@Rubbernecker]

Absolutely beautiful!!! You are so talented!

[@jacekejsmont]

Sporo dobrze wykonanej pracy.

[@davidschwartz5127]

Nice build! You should consider making a sickle bar for your standup tractor.

[@peterbachman5965]

yes yes yes yes yes!

[@luzern1000]

brawo, jestem pod wrażeniem 👍

[@vannewman4777]

again an excellent video and as always exquisite workmanship

[@williamfgreene6855]

Outstanding build,Very nice!!!

[@pauljewitt1445]

Brilliant workmanship

[@jamessmith7691]

Nice job. I've known a few older guys with that kind of talent born from necessity .

[@cstretick]

Brilliant! Creative, Artistic and Useful!

[@yeagerxp]

Excellent work 👍👍👍 . Thank you for sharing. Take care of yourself 🇨🇦

[@zacharywong483]

Fantastic job, as always!

[@chrissmith7655]

Hi, great stuff, love the ride along idea hahaha. Many thanks from UK.

[@JudgeMeNotLeMans]

Impressive build. With the way you built the axle/drive system you could remove the deck for different attachments. A sickle blade or a snow blower. Nicely done!!

[@kalleklp7291]

Oh yes! Plasma axe and welder a real blacksmithing job. :) I like your thinking...it's got to be simple and effective but also easy to maintain if need should be. Half a meter of weed and small trees seems not to be any problem for your machine. :)

[@szpieg49]

Wielki szacunek. Ogromnoracy włożony ale efekt jak z fabryki. Film trwa zaledwie kilka chwil ale szacuje, ze włożyłeś kilkadziesiąt godzin intensywnej pracy. Samo dorabianie detali- uchwytów czy tulejek przecież to żmudna robota. Pozdrawiam

[@MadeinPolandChannel]

Ojj raczej celowalbym w setki godzin 😉 Na filmie nie widać wszystkiego, ale projektowanie, myślenie, usprawnianie, modyfikowanie i zwykła robota pochłaniają strasznie dużo czasu ;/

[@tomleonard6177]

Another awesome build. So cool.

[@metricstormtrooper]

Brilliant, didn't like you banging the centre of the front bearing when you installed it but BRILLIANT none the less.😁

[@davidwilliams5350]

This guy's a real craftsman ! 😊

[@iainhetherington4608]

Well done mate probably as good if not better than most commercial mowers Cheers from Aus

[@jacekejsmont]

Jesteś mistrzuniem. Bardzo dobra robota💪

[@rjung_ch]

Liked that you could stand on the rear at the end, it works well! 👍💪✌

[@lukeweetman8197]

Bravo, absolutely awesome build, do you have any build plans/ parts lists, this is just the machine ive been looking to buy or hire, but to build my own that would be great love the channel keep up the great builds

[@arpcatchall822]

This machine will outlive your grandkids.

[@20havenfun08]

Great job... love it. Love the parts break down, Blade p/n... thank you:)

[@andreabond3501]

What size deck extremely impressed

[@orweyztungchiu5819]

That is one impressive builder and builder!!!

[@cldiver-nickgajowski2092]

Awesome! I wish you were my neighbor. Always a pleasure to see what comes out of your shop. Take care

[@johnnygoins7457]

That is an awesome grass cutter now I need one for my 6 ft grass thanks for sharing

[@MCsCreations]

Amazing work, dude! It turned out fantastic! 😃 Meanwhile, some nylon screws I bought just arrived... 😂 Anyway, stay safe there with your family! 🖖😊

[@peterjackson4863]

Not a single drawing or plan in site yet every thing fits perfectly

[@garydavis4982]

Skilled fabricator and designer.

[@turdferguson5300]

I'll bet ya can't buy one this size that's built this well. This video makes it look easy but when you're custom building each piece it isn't fast or easy. I'm getting old and lazy so I hired Land Pride to build mine, they just didn't know it at the time.

[@TheMabbasi]

Well made and is going to last for long time .

[@rynoagenbach4728]

GREAT SKILL AND WORKMANSHIP. WELL DONE!!! COULD NOT STOP WATCHING

[@szabolcskun6616]

Szuper.szép munka,preciz kialakitas,minden reszletet megmutattál.gratulalok.üdv Magyarországról

[@KonKrom]

Ok Mate good work now change that single blade to a blade with tillting ends that will make it even more robust. I know in case of blade smashing into stone ,bolts etc will slip on belt but making a blade with loose ends will help more on very difficult lawns and fallow lands.

[@bluethunder1951]

I agree, that’s how they are on my skid steer mower the are loose and have their own pivot, if you hit a rock or stump they have some give to them.

[@bearsrodshop7067]

Totaly ingenious, and an awesome buil and footage doing so. Been awhile since I have made time to watch, but a must shared build & video, Bear in TX-USA

[@villijs33321]

I swear every time I start to plan in my head to make something and then pop up your video on how to :D gr8 job

[@alainblondelot9707]

Excellent travail BRAVO !!!

[@jacquestournebize1268]

Bravo les garçons excellent travail !!!👍👍👍👍

[@wolfpreist]

Awesome video! Though I'm curious, why go this route and not make a 3 point/PTO brushhog for your tractor?

[@deanedeane4318]

Awsum Job Man !!! You forgot the coffee/stubby holder and a bar stool on the back axel / platform.....magic 😉😎

[@jimsworthow531]

Great work friend and the sulky was a nice touch!

[@rockcrusher4636]

Excellent, as always, thanks for sharing. Cheers.

[@enzoale7]

Alucinante amigo. Sos un Crack. Me fascinó!!! Hacia rato no veía tus videos y siguen estando espectaculares. Felicitaciones y abrazos.-

[@dakotamax2]

I already hit the Like button and am still in the intro commercial.

[@victorbunch7725]

An absolutely amazing build, Not a dull min. and works great! You can build me one anytime now!!!

[@tristankelsey1746]

Great build extremely impressive

[@trader4239]

Nice, i think life is good in Poland

[@brettleybuilt]

Guy makes better stuff than you can buy in the store.

[@peterbachman5965]

Indeed. This is a step up from the Billy Goat, which is sorta the default "best in class" brush mower.

[@Andrij_Rybolov]

Гарно придумано. Добре зроблено. На мою думку треба ще трошки попрацювати. Трохи та косарка не докошує. Але задумка чудова.

[@lovejcdc]

Awesome build man, very cool video.

[@westvirginiaridgewalker]

At first I thought you were making a battle bot 😂 you sir are highly skilled, thanks for the great videos

[@GBWM_CNC]

33:18 - odgłosy lata :D piękny pojazd

[@larrykrise3609]

nice work guy,s.very nice.larry in INDIANA USA