Making the Box Blade Quick Hitch Compatible

A Quick Hitch is a great addition for your tractor. It makes installing attachment a whole loot easier!!! ... BUT ...
When I got my Quick Hitch I thought I was away to races. Getting my attachments on and off was going to be a cake walk. Well hold on there big fella, it's not as simple as all that!!!
If you have older attachments, they may not be compatible with the Quick Hitch configuration. This was the case for me since some of my attachments were 'pre-Quick Hitch' vintage.
Some of my attachments, like the snow blower and the rear blade, were pretty easy to adapt. Just a minor adjustment to the top link pin and it was good. But the box blade as a bit more involved.
In this video I show how I make some changes to the way the box blade mounts on the Quick Hitch and it seems t be working pretty good for me so far.
BTW if you get a Quick Hitch, don't forget to get some 3 point arm lift pin bushings as well. The attachment won't work too good without these little darlings!!!
Have a look at this video and see what I do to make my box blade Quick Hitch compatible. It isn't rocket science, but it did make me scratch my head and few other spots before I got it to work out!!!
Thanks for tuning in and if it's your first time on the channel I'm honored that you found us!!! Please take some time to comment and thumbs up me. And if you have a mind too, you can subscribe too!!!
Here's a link to when I was first trying out the Quick Hitch:
• SpeeCo Quick Hitch Review
Take care everyone and stay safe!!!
#boxblade
#quickhitch
#quickhitchcompatible
#grampiesworkshop

[@BruceLyeg]

Back when my father had a farm in Saskatchewan, I was the quick hitch. As in "Bruce, get over here and hook this up!".

[@GrampiesWorkshop]

How's she goin'? Ha Ha Ha!!! I guess you can't get that kind of Quick Hitch at Princess Auto, even at the regular price!!! LOL Thanks for commenting and for your continued support Bruce!! Take care!!

[@RustyGlovebox]

Steve Rob sent me over and I'm a new sub. That quick hitch is a great attachment.

[@GrampiesWorkshop]

How's she goin'? Thanks a lot for the sub!!! Steve has a great channel and I have been a fan of his for many years now. The Quick Hitch sure helps with getting the attachments on and off. A good addition for sure. Thanks a lot for commenting and stopping by. Take care!!!

[@ddsharpening]

Good job Mike! Love your quote on the white board😂. Wife and I got our flu shots today, it was like an assembly line at the hospital, make an appointment, drive up, get your shot right in your car!

[@GrampiesWorkshop]

How's she goin'? Wow really, right in the car!!! Pretty weird world these days eh!! Great that you got your shot though. We checked with our doc and they don't even have them in the office yet, so it'll be probably the end of October before we will get ours!!! Thanks for tuning in and take care!!

[@loggerjohn01]

Hello Mike. Glad you got it working ,now it will a lot easier to hook on.Thanks for sharing

[@GrampiesWorkshop]

How's she goin'? It sure is easier to hook up John. I have already used this box blade more this fall than in the last year I'm sure. The Quick Hitch is some nice. Thanks for tuning in John and have a great week!!!

[@bdogjr7779]

Awesome Grampie《☆》Some good engineering & fab work Brother😎👍🏾I always hear my favorite Canadians talking about Princess Auto :*: Greetings from⛾Florida🤳my friend🤓🎱🔊☮✌👍🏾

[@GrampiesWorkshop]

How's she goin'? Yeah I think Princess Auto is a lot like Harbor Freight. Great place for men to shop!!! LOL Thanks a lot for your comments and for dropping by. Take care now!!

[@Tyler_Koehn]

Nice job Mike! These quick hitches are a life savor! I found converting my attachments to fit the standard hitch setup worked the best for me, as I do not need to ever adjust the hitch itself. All attachments fit. (Not to mention i welded my pins in for that reason) Thanks for sharing this. Full watch and liked! Have a good week!

[@GrampiesWorkshop]

How's she goin'? Thanks for dropping by the channel Tyler!!! Great to have you on board!! Some of my attachments were 'older' ones and weren't really set up for a Quick Hitch, but it turns out they aren't that hard to modify. My only issue was with the box blade and I need to adjust the top link hook. But I think I can modify the box blade so I won't even have to do that!!! Thanks again for watching and take care!!

[@thetechguy6004]

Well this video was a life saver! I acquired a quick hitch today & had this exact same issue with my scraper box. Thank you!

[@GrampiesWorkshop]

How's she goin'? Welcome to the channel!! I have some older 3 point implements and the Quick Hitch was not compatible with them. But a few adjustments and it worked. But then it's not really 'quick' to hook up to the attachment anymore!!! LOL But once I readjust the top hook, it pretty easy going!!! Thanks a lot for watching and especially for commenting. Take 'er easy!!!

[@GPOutdoors]

Morning Grampie! nice mod - good stuff! Love the Whiteboard of Wisdom today. LOL! All the best!

[@GrampiesWorkshop]

How's she goin'? Thanks a lot GP!!! The Box Blade being Quick Hitch compatible is proving to be a very timely mod!!! Thanks for tuning in an take care!!

[@houndsmanone4563]

Glad that worked out easily for you, Grampie and well done. Some implements are not as easily adjusted. You will now enjoy your box blade a lot more since it's simpler to attach quickly to your QH. Enjoyed a full-watch. Have a great weekend, my friend. Say hey to Nannie.

[@GrampiesWorkshop]

How's she goin'? Thanks a lot Don!!! Having the box blade quick hitch compatible has already paid dividends!!! I have used it more this fall than I have in over a year!!! Thanks a lot for the full watch and take care!!

[@laughton57]

Nice job. I recently got a box blade for my compact tractor. I had a tough time getting the implement to fit my quick hitch. I watched your video and understood the process better. My BB is made by the same outfit as yours. But there is a difference. The bottom hole, where the 4 arms are bolted around the spacer (for the hock to pick up the blade with), is smaller than the top hole. So changing to use the top hole will be difficult. The holes in the arms are 5/8 - matching the bottom hole of forward arms. The top hole, of the forward arms is 3/4. So if I use the top hole the bolt will be loose in the top forward arm holes. I would have to ream out the bottom hole - not an easy job. I think I'll continue to use the bottom hole for joining all four arms. If I find I'm having trouble, I'll ream or drill the back arm holes out. Note - my BB came with a bolt for the lower mounting hole (5/8") and a pin for the top hole (3/4"). I'm not sure how I would use a pit at the top to 'gather' the four arms together. It seems to me there would be a lot of slack on that pin - causing extreme wear on stuff. The top pin must be for a different model of quick hitch. than I have.

[@GrampiesWorkshop]

How's she goin'? The Quick Hitch is pretty nice but it should be called a 'faster way to hook up' because for a lot of older implements it sure isn't quick eh!! Your description of the issue you are having was good. I'm sorry I have nothing to offer to help though. I agree with you that a loose fit to hold the 4 arms together is only asking for premature wear and that wouldn't be good. Just a thought about reaming the holes, if you took the arms off and took them to a machine shop or garage, maybe they could ream them for you pretty quick. Thanks a lot for watching my video. I sure appreciate it and I enjoyed your comment. I hope we can hook up again sometime. Take 'er easy!!

[@peacefieldfarm_mn]

Hey Mike, you are a master problem solver. Great ideas! I got my flu shot last week so I should be at least safer than I was. Happy fall to you, it is beautiful around here (East Central MN)! Thanks for posting, Cheers!

[@GrampiesWorkshop]

How's she goin'? Thanks a lot for the nice comment!! Not too sure about being a master problem solver. I think I'm more a master problem creator!!! LOL Glad to hear you got your flu shot. Our doc doesn't get his supply of vaccine till near the end of the month, but we'll be there for our shots as soon as we can get them!!! Thanks for tuning in and take care!!

[@GardenTractorBoy]

I really like that quick hitch and the modifications you have done. Very tempted to buy a quick hitch but I guess we need to buy or make a 3pt on the tractor first LOL. I hope you havw a great weekend

[@GrampiesWorkshop]

Hey there Joseph!! Well if you get a 3 point hitch for any of your tractors, I would seriously look at getting a Quick Hitch or some sort of addition that would make hooking up easier. You'll be thankful you did!!! Thanks for tuning in and take care!!

[@jamesshonk565]

Good video about the QH and making older implements compatible.

[@GrampiesWorkshop]

How's she goin'? Thanks!!! When I got the Quick Hitch I was pretty pumped because I was going to be able to switch out implements real quick. Then found out that all attachments aren't necessarily QH compatible. I was lucky though to be able to modify mine to work as well as they do. Thanks a lot for dropping by the channel, I hope you come back again. Take 'er easy!!!

[@nancyincanada5553]

Thanks for another great video. Laughing my sides off at your quote of the day LOL That's a good one! LOL Have a great weekend.

[@GrampiesWorkshop]

Hey there Nancy!!! I was trying to find a good quote on the web and then I thought of this one!! I thought it fit pretty good!!! Glad you liked it!! Have a great weekend and take care!!

[@gregwells4161]

Great video on Quick attach keep em coming. I. Really. Enjoy your channel.

[@GrampiesWorkshop]

How's she goin'? Thank you Greg!! The Quick Hitch is a handy thing to have but when you have to stop and make adjustments to adapt it to the attachment, well that kind of takes the shine off it eh!! This little change made it better, but there is still room for improvement!! LOL Thanks for stopping by and for the nice comment. Take 'er easy!!!

[@VickyGeagan]

Those bushings in the US can be purchased at your local Harbor Freight. The same as Princess Auto. They carry all the same products.

[@GrampiesWorkshop]

How's she goin'? That's what I expected Vicky. I think Harbor Freight is similar to Princess Auto. The Princess Auto we shop at is about a 2 hour drive from here, but we usually stop in every time we're in the city!!! Just in case!!! Thanks for watching and take care!!

[@VickyGeagan]

@@GrampiesWorkshop Your quite welcome you too.

[@GrampiesWorkshop]

@@VickyGeagan Steve just showed me where you posted about my channel getting close to 1000 subs. Thanks a lot for all your support girl!!! You are a great supporter of the channel and I'm glad you're here!!! Take care!!

[@sarahsandman4234]

Mike, just subscribed. Steve sent me!!! Great channel!

[@GrampiesWorkshop]

How's she goin' and welcome!!! Steve is a great guy!! A 'real' person in every way!!! Thanks a lot for the comment and for the sub. I hope to see you often!! Take care!!

[@RCAFpolarexpress]

Bonsoir mon ami 👌 Vous êtes très bien équipé pour changé vos implements rapidement maintenant 👌😊 Yellow paints marker 😊👍 Great board joke 🤔🤣👍 Have a great week end Cheers !!!

[@GrampiesWorkshop]

Comment ca va Dave? Merci d'avoir regarde!! Bien sur, change les implements est plus simple et plus rapide!!! C'est si bon!!! Bonne fin de la samaine Dave!!!

[@RCAFpolarexpress]

@@GrampiesWorkshop Vous aussi !!! 👍😊

[@BrucesShop]

There is some old fashioned science there grampie. You did it. Wow did you get one of the kids to help you with your cool interface editing :-)

[@GrampiesWorkshop]

Hey there Bruce!!! So far I am able to handle the editing myself, but it is getting to be a challenge!!! LOL The kids could do a better job I'm sure, but I would need to correct the spelling and grammar !!! ;-) Thanks for tuning in and take care!

[@SteveRobReviews]

Lots off thinking went on in this vid:)

[@GrampiesWorkshop]

How's she goin'? You ain't lying there buddy!!! I was going bald before I started this, and now I am bald!! LOL Got it to work though!!! Thanks for your continued support Steve and take care!!

[@SteveRobReviews]

@@GrampiesWorkshop Check your email when you get time . You will get a good chuckle 🤣

[@GrampiesWorkshop]

@@SteveRobReviews Vicky is a real supporter. That's pretty neat!!! Thanks for sharing!!!

[@GrampiesWorkshop]

@@SteveRobReviews That's grteat of Vicky to mention this. She is a great supporter of the channel!!! Thanks for sharing.

[@chrisjohnson8124]

Nice video- very clear

[@GrampiesWorkshop]

How's she goin'? Thanks for dropping by and commenting Chris!! Great to have you on here. The quick hitch is nice to have but a better name for it would be "a pretty quick hitch" Maybe!! LOL Take 'er easy!!

[@AliMackMechanical]

Nice one mate good job mate. Looks really good bit Dreier over there with you pretty copd and Wet over here in the Highlands mate.👍

[@GrampiesWorkshop]

How's she goin'? We have had a very dry summer thins year, but getting some much needed rain lately. Still need some more though as the lake is still down about a foot!!! Thanks for commenting Ali and take care!!

[@michaelwong4579]

Great demonstration! I just bought myself a quick hitch (cheaper brand) from Princess Auto. My first attachment to try out is a box blade. Hopefully it will fit as handsomely as yours :)

[@GrampiesWorkshop]

How's she goin'? Well Michael, that's where I got my Quick Hitch, Princess Auto!!! If I remember right, the box blade hooked up pretty easy. The big problem for me, so far, has been getting the top link hook to fit and mate with the implements. Have fun with it and how about some videos? Go ahead make one and post it. What could go wrong!!! LOL Thanks for tuning in here and commenting. Take care!!!

[@PinetreeLine]

Gotta love Princess Auto eh Mike? Great job brother!

[@GrampiesWorkshop]

How's she goin'? Yes sir. Princess Auto is some nice. Lots of toys for boys in that store!!! LOL Thanks for watching Doug and take 'er easy!!

[@FromSteelToWood]

Even though you have to move the top link on the quick hitch, it's way easier than matching the pins into the lower arm without a quick hitch! Thanks Mike!

[@GrampiesWorkshop]

Salut Joe!!! Right on. Adjusting the top hook is easily done. One thing I have noticed though, by moving the brace arms on the box blade to the top hole on the mounting plate, the mount is now tipped towards the back of the box blade. This reduces the adjustments I can make and also makes it a bit tricky to hook up. So I was thinking I would make 2 new holes on the cross pieces that the braces bolt to at the back of the box. That way the mount would come back to being more vertical. If you can understand all that then you must be an engineer!! LOL Thanks for tuning in Joe and take care!

[@FromSteelToWood]

Lol! As a matter of fact, I am an engineer! I know what you mean, hooking with the quick hitch seems easier when the top hook makes contact first.

[@DriveShaftDrew]

that was a simple fix good job thumbs up shared

[@GrampiesWorkshop]

How's she goin'? I was lucky Drew, this did turn out to be a pretty simple work around. Still needs tweaking but it's workable right now. Thanks a lot for tuning in and take care!!

[@GrantHubbard]

Ino some Steve Rib guy from up that way.. he suggested checkn ya out...glad he did..i will be catching up on your vidss.

[@GrampiesWorkshop]

Good day eh!!! That Steve is a great fella and thanks for dropping by. I sure hope you enjoy the channel!!! Looking forward to interacting with and following your channel!!! Take care!!

[@AkDadStuff]

Heyhey Mike Nice job. That is the next thing on my Christmas list but I only have the rear blade that I need it for but its a pain in the patoody to put on. Thanks

[@GrampiesWorkshop]

Good day eh!! Mike a Quick Hitch, or some other addition that makes putting the attachments on and off easier, is a must have. I never thought it would be, but it sure makes getting the attachments installed a lot easier!! Thanks for watching and take care!!

[@IrishChippy]

When I was young all we had was pin in drawbar. The later they had this quick hitch mostly used by silage contractors. You could pick up and drop a trailer without leaving your seat. WE NEVER HAD ONE. lol. This system of yours in new to me. I see the sun came out. Would you believe we had rain today. Take care you two.

[@GrampiesWorkshop]

How's she goin'? The Quick Hitch sure makes life easier when it comes to getting attachments on and off the 3 point!!! Yes the sun was shining and it was pretty warm considering the time of year!!! Glad to hear you got some rain. Stay safe!!! Take care!!!

[@joeo1352]

Looks like it should work great. Same to you stay safe be good 👍

[@GrampiesWorkshop]

How's she goin'? Yes Joe, it did work great!!! I have used the box blade a few times since I adjusted it to be compatible with the Quick Hitch!!! Sure is a lot easier to get on and off the tractor!! Thanks for tuning in and take care!!!

[@daveknowshow]

I honestly did not think this would work. I learned something! I have a friend who has a very similar BB and he wants to get it QH friendly. I will point him to this video. I really thought the arms would give you trouble. good work around Mike!

[@GrampiesWorkshop]

Hey there Dave!!! Yes it worked out pretty good. The only real issue I have is the mount on the box blade is now tipped toward the back of the box. Makes it a bit tricky to hook up and lessens adjustments that may need to be made for various jobs. I think a solution to this would be to drill 2 new holes on the braces that go from the box beam to the back of the box blade that the braces attach too. This way I can move the braces forward more and make the mount stand up straighter. I hope you can understand my explanation!!! LOL Thanks a lot for watching Dave and take care!!

[@daveknowshow]

@@GrampiesWorkshop that is sounds like the issue I was thinking of. perhaps add a piece of steel on each side where the braces attach at the box. maybe 3 inches long with two holes located at 1 inch from each end or what ever is needed. then attach the braces to the top hole of that 3 inch piece and the bottom hole attached to the box? that may be clear as mud for an explanation. I'm sure you will come up with a solution you got mad skillz brother!!! enjoyed the video as always.

[@GrampiesWorkshop]

@@daveknowshow That's an idea too. I'll have to check that out and see where it goes!!!

[@DIYMyWay]

Hi Mike! Nicely done! You might consider replacing the top hook bolts with pins. Ken’s Bolt-on Hooks has a set you can get. It makes adjusting the top hook a lot easier and faster.

[@GrampiesWorkshop]

How's she goin'? Yes I have seen these pins. I don't have to change this very often so the bolts are working fine for now, but it's something I can put on my 'one of these days' list!!! LOL Thanks a lot for commenting and watching Martin. I think that's great that you take the time and do this!!! Take care!!

[@brian_2040]

@@GrampiesWorkshop don't move the top hook up, if it was me I'd drill new holes in arms the are right and left. That way everything would be the same. The more you end up moving the hook, it'll start to get some slop in the holes. Both my hitches are not adjustable on the hook.

[@GrampiesWorkshop]

@@brian_2040 How's she goin'? Thanks for the comment. That's a good point. However drilling holes in the attachment arms isn't easy for me to do. Right now I have nuts and bolts holding the top hook in place and I tighten them so I haven't had any slop yet. I'll keep an eye on it though. Some nice that you commented. I hope to see you back commenting on the channel in the future!!! Take care!!!

[@TomokosEnterprize]

You and I are lucky as we can see a problem and then either get the wrenches or welder and drill press plugged in and execute that problem. I feel sory for the folks that have to pay dearly for that service. The ability to wander the stores to get parts or pieces that can be repurposed for other projects. Princess is a great store to pick up "Things" for sure eh. It is hard not picking up a few extra things when I go in there. I always thought that dozer blades should have the extra blade on the inside of the reg blade. It would sure save a lot of wear on blade bolts from back blading(that we are not supposed to do eh),LOL. Take care bud !

[@GrampiesWorkshop]

Good day eh!!! Right you are Dean!! When I see some things that people have to pay to get worked on I thank my lucky stars that I can do this myself!!! But then again there are things I can't do and I don't mind paying the people who can, so I guess what goes around comes around!!! Thanks for dropping by the channel and take care!

[@TomokosEnterprize]

@@GrampiesWorkshop I hear you. Taping dry wall, tires and exhaust systems are best left for the ones that like it eh, LOL.

[@GrampiesWorkshop]

@@TomokosEnterprize And add to that 'roofing'. My back isn't up for that anymore!!!

[@TomokosEnterprize]

@@GrampiesWorkshop I don't mind nailing shingles with a nice light air nailer it's the packing and spreading the tiles that gets me. That is why they made 16 to 18 yr olds eh, LOL.

[@janetdickson4451]

It is a good thing I talked you into getting this quick hitch - even if it means lots of mods to make your attachments compatible. In the long run it will make things easier which is key! Just not sure why you would want to go to Vegas to get hitched - hey just letting you know you are already hitched and I don't plan on going anywhere anytime soon!!!!

[@GrampiesWorkshop]

I'm glad I got hitched and since I'm hitched to you, well I'm not interested in a switch, especially since you bought me a quick hitch!!! LOL

[@janetdickson4451]

@@GrampiesWorkshop Glad to hear it! May have to take you to Princess Auto soon.

[@GrampiesWorkshop]

@@janetdickson4451 Oh Boy!!!

[@LouisianaTractorworks]

Nice job Mike!! That worked really good! Is all your stuff now QH ready? Have a good week my friend!

[@GrampiesWorkshop]

Good day eh!!! Not all my gear is QH ready. The landscape rake and the carry all are not compatible. But they are easy to get on and off so I'm in no rush to get them changed over. Sure hope things are getting squared away for you all John!!! Still sending off some prayers for you all!!! Stay safe!!!

[@LouisianaTractorworks]

@@GrampiesWorkshop Thank you Mike!

[@sunjaybedi4389]

Good video Mike, I am thinking I would like a Pat’s easy change on my tractor, ever check them out.

[@GrampiesWorkshop]

How's she goin'? No I haven't checked the Pat's System out but I see lots of vids about it. It looks really good too. I think anything that makes it easier to get the attachments mounted has to be a good idea. The one thing I was concerned about with all these systems is that it puts the load farther back off the tractor. I know with my Quick Hitch the load was moved back about 3 1/2". Doesn't sound like much, but it changes the way the tractor handles. Just an FYI for you!!! Thanks for tuning in and take care!

[@pstoneking3418]

The two bolts you have to move for different attachments can be replaced with pins with quick snap cotters.

[@GrampiesWorkshop]

How's she goin'? Welcome to the channel!!! That's an excellent idea. If I had the pins I would use them, but since I only had the nuts and bolts that came with the hitch that's what I used. But the pins would sure make this change over a lot quicker and simpler eh!! Thanks for dropping by the channel and leaving a comment. Take 'er easy!!!

[@twinbrookacres]

That pallett was nice, Mike. Looks like it was built by a master craftsman! And, if we guessed Princess Auto for the bushings, do we win a free subscription to your channel? Have a good weekend.

[@GrampiesWorkshop]

How's she goin'? Yes you win a free subscription and also an invite to watch all my videos!!! LOL Great comment buddy, thanks a lot!!! Take care now!!!

[@BrosephRussell]

Nice mod i came over from StevecRob channel

[@GrampiesWorkshop]

How's she goin'? Thanks for dropping by. Steve is a great guy and I love his channel. I hope you enjoy it here and come back often!!! The Quick Hitch sure makes using the attachments a lot easier!!! Take care!!!

[@RetiredOutdoors]

Hey Mike I’m thinking of getting the same Quick hitch from Princess Auto. Are you still happy with it? Also, I have a GC2310 and I heard you mention about changing the rear tail lights to LED. I’m wondering if you could tell me which ones you used please?

[@GrampiesWorkshop]

How's she goin'? The Quick Hitch is doing great!!! Some of my implements weren't compatible with it, but that wasn't the quick hitch's fault. The attachments were older versions. It was pretty easy to get them to work though. The LED tail lights are nice for sure too. The one thing you need to watch for is to get LED lights that can be operated by the flasher. Because the LEDS take so little current they don't heat up the flasher element and sometimes they won't flash. Here is a link to the lights I got: www.amazon.ca/Replacement-Camper-Signal-Lights-Backup/dp/B095VN61S1/ref=sr_1_16?dchild=1&keywords=1141+LED+Lights&qid=1626906998&sr=8-16 It's a long one but these lights are 'bright white' and can be used in flasher circuits. I also replaced the headlights with LEDs as well as the 4-way flashers and that made a big difference. A lot less current draw on the alternator. This was handy for me since when I plow in winter it's usually in the dark and the work lights I have, even though they are LED as well, was a pretty good raw and sometimes I wasn't making enough voltage to charge the battery!!! LOL Thanks a bunch for the comment and I hope this info will help you out!!! Thanks for watching and I hope to see you back again!!!

[@RetiredOutdoors]

Thanks for the LED info Mike, I appreciate it. 👍

[@kevinlancaster3762]

When you moved the arms on the box scrape from the bottom hole to the top hole was this simple to do?

[@GrampiesWorkshop]

How's she goin'? Thanks a lot for tuning in!! When I tightened up the bolts the arms sort of just bent to suit. The bends were just about right to start with. Great question. Thanks a lot for dropping by and take care!!!

[@jroseAsmrMukbang]

like 25 amaxing vedo friwnd wtch

[@GrampiesWorkshop]

Well hi there. Not too sure what you said, but thanks for dropping by!! Take care!!

[@matthewhaataja9850]

Aye old wise one. Got any wisdom. For a youngster looking to buy his first compressor?

[@GrampiesWorkshop]

How's she goin'? Well your 1st compressor eh!!! Big step. What I looked for was a compressor that had a pump crank case with oil. Some of the compressor's I looked at didn't have the crank in oil. I think having and oil filled crank case makes for a better machine. Other than that just make sure it can produce enough SCFM to supply your tooling. Thanks for dropping by and I hope this helps you out some. Take care!!

[@karljolley8346]

pay for a cat 1 and still have to pay extra for bushings = seems wrong to me. may be easer. to put a half bushing each side of the quick hitch. I think there is actually ONE brand that sells the cat 1 quick hitch with actual cat 2 hooks. but Grampie fixed it anyway.

[@GrampiesWorkshop]

How's she goin'? It does seem off that the hitch would require bushings. I see now that some Quick Hitches do come with a set of bushings. I have used my quick hitch with no bushings but it is pretty close to being able to come free of the locking arms. Thanks a lot for tuning in and commenting. I sure appreciate the visit!! Take 'er easy!!!

[@ghost_rider221]

again just like the other guys video thats great as long as you have an adjustable quick hitch

[@GrampiesWorkshop]

How's she goin'? You're right. Most Quick Hitches have an adjustable top hook and between that and being able to make some mods to the implements I was lucky to be able to get my attachments to mate up with the Quick Hitch. I do have to adjust the top hook for some of them though so that makes this more like a 'quicker hitch' rather than a 'quick hitch'!! LOL Thanks for watching and commenting. I hope you can back again!! Take 'er easy!!!

[@ghost_rider221]

@@GrampiesWorkshop my hitch is not adjustable so im in a pickle lol..i think i will work on the implement see what i can do there thx again